April 2008 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Tue Apr 1 00:04:23 EST 2008
Ending: Wed Apr 30 23:26:26 EST 2008
Messages: 1811

• [PATCH] pseries: phyp dump: Variable size reserve space.   Manish Ahuja
• [PATCH] pseries: phyp dump: Variable size reserve space.   Manish Ahuja
• [PATCH] pseries: phyp dump: Variable size reserve space.   Manish Ahuja
• [PATCH] pseries: phyp dump: Variable size reserve space.   Manish Ahuja
• [PATCH] pseries: phyp dump: Variable size reserve space.   Manish Ahuja
• [PATCH] pseries: phyp dump: Variable size reserve space.   Manish Ahuja
• [PATCH] pseries: phyp dump: Variable size reserve space.   Manish Ahuja
• [LMB][1/2] Fix some whitespace and other formatting issues, use pr_debug   Nick Andrew
• ppc405ep emac driver loading problem   M B
• ppc405ep emac driver loading problem   M B
• Get new_emac driver running on 405EP   M B
• Phy read timeout in ibm_new_emac driver   M B
• [BUG] 2.6.24.4 - kernel bug at kernel/sched.c:5154!   Kamalesh Babulal
• [BUG] 2.6.25-rc8-mm1 kernel panic while bootup on powerpc   Kamalesh Babulal
• [BUG] 2.6.25-rc8-mm1 kernel panic while bootup on powerpc   Kamalesh Babulal
• [BUG] 2.6.25-rc8-mm1 kernel panic while bootup on powerpc   Kamalesh Babulal
• [PATCH] mm: make mem_map allocation continuous v2.   Kamalesh Babulal
• [BUG] 2.6.25-rc2-git4 - Regression Kernel oops while running kernbench and tbench on powerpc   Kamalesh Babulal
• [BUG] 2.6.25-rc2-git4 - Regression Kernel oops while running kernbench and tbench on powerpc   Kamalesh Babulal
• [BUG] 2.6.25-rc2-git4 - Regression Kernel oops while running kernbench and tbench on powerpc   Kamalesh Babulal
• [BUG] 2.6.25-rc2-git4 - Regression Kernel oops while running kernbench and tbench on powerpc   Kamalesh Babulal
• [BUG] linux-next: Tree for April 23 - kernel panic during bootup on x86_64 and ppc   Kamalesh Babulal
• [BUG] 2.6.25-rc2-git4 - Regression Kernel oops while running kernbench and tbench on powerpc   Kamalesh Babulal
• [BUG] 2.6.25-git8 Kernel Bug while bootup on ppc and x86   Kamalesh Babulal
• [BUG] 2.6.25-git8 Kernel Bug while bootup on ppc and x86   Kamalesh Babulal
• State of the MPC5200 PSC AC97 driver   Marian Balakowicz
• State of the MPC5200 PSC AC97 driver   Marian Balakowicz
• State of the MPC5200 PSC AC97 driver   Marian Balakowicz
• [PATCH] PowerPC: MPIC ack interrupts at mpic_teardown_this_cpu()   Valentine Barshak
• [PATCH] PowerPC 44x: use machine_device_initcall() instead of device_initcall() for warp_nand   Valentine Barshak
• [PATCH 3/4] PowerPC: Add PCI entry to 440EPx Sequoia DTS.   Valentine Barshak
• [PATCH] PowerPC 44x: Add NOR flash entry to Canyonlands DTS.   Valentine Barshak
• [PATCH] PowerPC 44x: Add NOR flash entry to Canyonlands DTS.   Valentine Barshak
• [PATCH] PowerPC 44x: Add NOR flash entry to Canyonlands DTS.   Valentine Barshak
• [PATCH 3/3][POWERPC][V2] Xilinx: boot support for Xilinx uart 16550.   Johann Baudy
• Xilinx GPIO driver / CONFIG_OF   Johann Baudy
• Xilinx GPIO driver / CONFIG_OF   Johann Baudy
• State of the MPC5200 PSC AC97 driver   Juergen Beisert
• State of the MPC5200 PSC AC97 driver   Juergen Beisert
• RFC: MPC5200 PSC AC97 driver   Juergen Beisert
• RFC: MPC5200 PSC AC97 driver   Juergen Beisert
• RFC: MPC5200 PSC AC97 driver   Juergen Beisert
• RFC: MPC5200 PSC AC97 driver   Juergen Beisert
• RFC: MPC5200 PSC AC97 driver   Juergen Beisert
• RFC: MPC5200 PSC AC97 driver   Juergen Beisert
• [PATCH 0/4] [POWERPC] lockdep support for ppc64   Johannes Berg
• [PATCH 0/4] [POWERPC] lockdep support for ppc64   Johannes Berg
• [RFC/PATCH] powerpc: Add irqtrace support to 32-bit powerpc   Johannes Berg
• printk time confusion?   Johannes Berg
• printk time confusion?   Johannes Berg
• printk time confusion?   Johannes Berg
• [PATCH/RFC] via-pmu: remove mdelays from suspend/resume code   Johannes Berg
• cpu_clock confusion (was: printk time confusion?)   Johannes Berg
• [PATCH/RFC] via-pmu: remove mdelays from suspend/resume code   Johannes Berg
• [RFC/PATCH] powerpc: Add irqtrace support to 32-bit powerpc   Johannes Berg
• [RFC/PATCH] powerpc: Add irqtrace support to 32-bit powerpc   Johannes Berg
• [PATCH v2] powerpc: Add irqtrace support for 32-bit powerpc   Johannes Berg
• [PATCH v2] powerpc: Add irqtrace support for 32-bit powerpc   Johannes Berg
• [PATCH v3] powerpc: Add irqtrace support for 32-bit powerpc   Johannes Berg
• [PATCH v3] powerpc: Add irqtrace support for 32-bit powerpc   Johannes Berg
• [PATCH v3] powerpc: Add irqtrace support for 32-bit powerpc   Johannes Berg
• cpu_clock confusion (was: printk time confusion?)   Johannes Berg
• cpu_clock confusion   Johannes Berg
• [kvm-ppc-devel] [PATCH] Add idle power save for ppc 4xx   Arnd Bergmann
• [Cbe-oss-dev] [PATCH] Cell OProfile: SPU mutex lock fix   Arnd Bergmann
• [PATCH 2/3] [POWERPC][V3] Xilinx: of_serial support for Xilinx uart 16550.   Arnd Bergmann
• [PATCH 1/3][POWERPC][V2] of_serial: Fix possible null dereference.   Arnd Bergmann
• [PATCH 1/3][POWERPC][V2] of_serial: Fix possible null dereference.   Arnd Bergmann
• [PATCH 2/3] [POWERPC][V3] Xilinx: of_serial support for Xilinx uart 16550.   Arnd Bergmann
• [Cbe-oss-dev] [PATCH] RTAS - adapt procfs interface   Arnd Bergmann
• [Cbe-oss-dev] [PATCH] Cell OProfile: SPU mutex lock fix   Arnd Bergmann
• Question on mpc52xx_common.c   Arnd Bergmann
• [PATCH] Add idle wait support for 44x platforms   Arnd Bergmann
• [kvm-ppc-devel] [PATCH] [v2] Add idle wait support for 44x platforms   Arnd Bergmann
• [PATCH] Add idle wait support for 44x platforms   Arnd Bergmann
• [PATCH 3 of 3] [KVM POWERPC] PowerPC 440 KVM implementation   Arnd Bergmann
• [kvm-ppc-devel] [PATCH 3 of 3] [KVM POWERPC] PowerPC 440 KVM implementation   Arnd Bergmann
• [Cbe-oss-dev] [PATCH] Cell OProfile: SPU mutex lock fix   Arnd Bergmann
• [PATCH] [v5] Add idle wait support for 44x platforms   Arnd Bergmann
• [PATCH] [v5] Add idle wait support for 44x platforms   Arnd Bergmann
• [PATCH 2/2] Add DIU platform code for MPC8610HPCD   Arnd Bergmann
• [PATCH 2/2] Raise the upper limit of NR_CPUS and move the pacas into the BSS.   Arnd Bergmann
• [kvm-ppc-devel] [PATCH] Add idle power save for ppc 4xx   Hollis Blanchard
• [PATCH] Add idle power save for ppc 4xx   Hollis Blanchard
• [PATCH] Add idle power save for ppc 4xx   Hollis Blanchard
• [RFC][PATCH] initial port of fixmap over from x86 for ppc32   Hollis Blanchard
• [kvm-ppc-devel] [PATCH] Add idle wait support for 44x platforms   Hollis Blanchard
• [kvm-ppc-devel] [PATCH] Add idle wait support for 44x platforms   Hollis Blanchard
• [kvm-ppc-devel] [PATCH] [v2] Add idle wait support for 44x platforms   Hollis Blanchard
• [PATCH 0 of 3] KVM for PowerPC 440   Hollis Blanchard
• [PATCH 1 of 3] [POWERPC 44x] Export tlb_44x_hwater for KVM   Hollis Blanchard
• [PATCH 2 of 3] [KVM] Add DCR access information to struct kvm_run   Hollis Blanchard
• [PATCH 3 of 3] [KVM POWERPC] PowerPC 440 KVM implementation   Hollis Blanchard
• [PATCH 2 of 3] [KVM] Add DCR access information to struct kvm_run   Hollis Blanchard
• [PATCH 3 of 3] [KVM POWERPC] PowerPC 440 KVM implementation   Hollis Blanchard
• [PATCH 2 of 3] [KVM] Add DCR access information to struct kvm_run   Hollis Blanchard
• [PATCH 3 of 3] [KVM POWERPC] PowerPC 440 KVM implementation   Hollis Blanchard
• [kvm-ppc-devel] [PATCH] [v5] Add idle wait support for 44x platforms   Hollis Blanchard
• [PATCH 0 of 3] KVM for PowerPC 440   Hollis Blanchard
• [PATCH 6/9] [POWERPC] prpmc2800: clean up dts properties   Segher Boessenkool
• [PATCH 01/11] [POWERPC] bootwrapper: Allow specifying of image physical offset   Segher Boessenkool
• [RESEND3 PATCH] [POWERPC] mpc5200: Amalgamated DTS fixes and updates   Segher Boessenkool
• [PATCH] PowerPC: MPIC ack interrupts at mpic_teardown_this_cpu()   Segher Boessenkool
• [kvm-ppc-devel] [PATCH] [v2] Add idle wait support for 44x platforms   Segher Boessenkool
• [PATCH] PowerPC: MPIC ack interrupts at mpic_teardown_this_cpu()   Segher Boessenkool
• 4xx defconfig reorg   Segher Boessenkool
• [PATCH] make help: Show defconfig subdirs   Segher Boessenkool
• [PATCH 1/9 v2] powerpc: change FDT compatible prefix to mrvl   Segher Boessenkool
• [PATCH 1/9 v2] powerpc: change FDT compatible prefix to mrvl   Segher Boessenkool
• Question on mpc52xx_common.c   Segher Boessenkool
• 4xx defconfig reorg   Segher Boessenkool
• [PATCH] pseries: phyp dump: Variable size reserve space.   Segher Boessenkool
• [PATCH] pseries: phyp dump: Variable size reserve space.   Segher Boessenkool
• [PATCH] 86xx: mark functions static, other minor cleanups   Segher Boessenkool
• [PATCH] 86xx: mark functions static, other minor cleanups   Segher Boessenkool
• [PATCH 3/3] Enable MSI support for 85xxds board.   Segher Boessenkool
• [RFC/POWERPC] mpc5200: remove "mpc5200b-*" from compatible lists in dts files   Segher Boessenkool
• [PATCH 1/5] [POWERPC] sysdev: implement FSL GTM support   Segher Boessenkool
• [PATCH 4/5] [POWERPC] QE: implement support for the GPIO LIB API   Segher Boessenkool
• [PATCH] [PPC] Remove mpc8272 ads board from arch/ppc   Segher Boessenkool
• [PATCH] [PPC] Remove mpc8272 ads board from arch/ppc   Segher Boessenkool
• [PATCH 1/3] MSI driver for Freescale 83xx/85xx/86xx cpu   Segher Boessenkool
• [PATCH 1/3] Raise the upper limit of NR_CPUS.   Segher Boessenkool
• [PATCH] powerpc: Don't play type punning games with lock_token   Segher Boessenkool
• Question on MPC83xx interrupts   Segher Boessenkool
• [PATCH 1/3] MSI driver for Freescale 83xx/85xx/86xx cpu   Segher Boessenkool
• [PATCH] powerpc: Don't play type punning games with lock_token   Segher Boessenkool
• [PATCH 2/2] mpic_u3msi: mpic_u3msi: failed allocation unnoticed   Segher Boessenkool
• ppc440 caches - change proposal [RFC]   John Bonesio
• ppc440 caches - change proposal [RFC]   John Bonesio
• pci issue - wrong detection of pci ressources   Johan Borkhuis
• [PATCH/RFC] via-pmu: remove mdelays from suspend/resume code   Brad Boyer
• [PATCH] Add idle power save for ppc 4xx   Josh Boyer
• [kvm-ppc-devel] [PATCH] Add idle power save for ppc 4xx   Josh Boyer
• [PATCH] Add idle power save for ppc 4xx   Josh Boyer
• [PATCH] Add idle power save for ppc 4xx   Josh Boyer
• [PATCH] Add idle power save for ppc 4xx   Josh Boyer
• [PATCH] Add idle power save for ppc 4xx   Josh Boyer
• [PATCH] Add idle power save for ppc 4xx   Josh Boyer
• [kvm-ppc-devel] [PATCH] Add idle power save for ppc 4xx   Josh Boyer
• Commits added to powerpc.git master/powerpc-next branches   Josh Boyer
• Commits added to powerpc.git master/powerpc-next branches   Josh Boyer
• [PATCH 1/3][POWERPC][V2] of_serial: Fix possible null dereference.   Josh Boyer
• [PATCH] [POWERPC] 4xx: Create common ppc4xx_reset_system() in ppc4xx_soc.c   Josh Boyer
• [PATCH] Add idle wait support for 44x platforms   Josh Boyer
• [PATCH] Add idle wait support for 44x platforms   Josh Boyer
• [PATCH] Add idle wait support for 44x platforms   Josh Boyer
• Please pull linux-2.6-mpc52xx.git   Josh Boyer
• [PATCH] [v4] Add idle wait support for 44x platforms   Josh Boyer
• [PATCH 2/3] [POWERPC][V3] Xilinx: of_serial support for Xilinx uart 16550.   Josh Boyer
• Please pull 'for-2.6.26' branch of 4xx tree   Josh Boyer
• 4xx defconfig reorg   Josh Boyer
• Kilauea: kernel hangs when using ARCH=powerpc   Josh Boyer
• [PATCH 3 of 3] [KVM POWERPC] PowerPC 440 KVM implementation   Josh Boyer
• [PATCH] Add idle wait support for 44x platforms   Josh Boyer
• [kvm-ppc-devel] [PATCH] [v2] Add idle wait support for 44x platforms   Josh Boyer
• [PATCH] Add idle wait support for 44x platforms   Josh Boyer
• ppc440 caches - change proposal [RFC]   Josh Boyer
• 4xx defconfig reorg   Josh Boyer
• 4xx defconfig reorg   Josh Boyer
• ppc405ep emac driver loading problem   Josh Boyer
• [PATCH] [v5] Add idle wait support for 44x platforms   Josh Boyer
• [PATCH 0 of 3] KVM for PowerPC 440   Josh Boyer
• [PATCH 1 of 3] [POWERPC 44x] Export tlb_44x_hwater for KVM   Josh Boyer
• [PATCH 2 of 3] [KVM] Add DCR access information to struct kvm_run   Josh Boyer
• ppc440 caches - change proposal [RFC]   Josh Boyer
• patches for 2.6.26   Josh Boyer
• [PATCH] [v5] Add idle wait support for 44x platforms   Josh Boyer
• [PATCH 1/2] ibm_newemac: PowerPC 440GX EMAC PHY clock workaround   Josh Boyer
• [PATCH 1/2] ibm_newemac: PowerPC 440GX EMAC PHY clock workaround   Josh Boyer
• [PATCH 5/5] WDT driver   Josh Boyer
• [PATCH 4/5] LED driver   Josh Boyer
• [PATCH 1/5] Boot code   Josh Boyer
• Warp patches for 2.6.26   Josh Boyer
• Warp patches for 2.6.26   Josh Boyer
• Manual kernel parameters are being ignored   Josh Boyer
• Please pull 'for-2.6.26' branch of 4xx tree   Josh Boyer
• Get new_emac driver running on 405EP   Josh Boyer
• linux-next: 4xx build failure   Josh Boyer
• Please pull 'for-2.6.26' branch of 4xx tree   Josh Boyer
• Please pull 'for-2.6.26' branch of 4xx tree   Josh Boyer
• linux-next: 4xx build failure   Josh Boyer
• Please pull 'for-2.6.26' branch of 4xx tree   Josh Boyer
• More patches pushed to powerpc.git master and powerpc-next branches   Josh Boyer
• More patches pushed to powerpc.git master and powerpc-next branches   Josh Boyer
• Please pull 'for-2.6.26' branch of 4xx tree   Josh Boyer
• [PATCH 1/2] [v3][POWERPC] refactor dcr code   Josh Boyer
• [PATCH] [PPC] 4xx: Fix arch/ppc 440 builds   Josh Boyer
• [PATCH] [PPC] 4xx: Fix arch/ppc 440 builds   Josh Boyer
• removal of arch/ppc in 2.6.27?   Josh Boyer
• [PATCH 1/2] [v3][POWERPC] refactor dcr code   Josh Boyer
• RFC: Possible section mismatch problem in ibm_newemac?   Josh Boyer
• [PATCH 0/2] Fix 440 arch/ppc builds   Josh Boyer
• [PATCH 1/2] [PPC] 4xx: Fix duplicate phys_addr_t definition   Josh Boyer
• [PATCH 2/2] [PPC] Add strncmp to arch/ppc   Josh Boyer
• [RFC POWERPC] booting-without-of: bindings for FHCI USB, GPIO LEDs, MCU, and NAND on UPM   Josh Boyer
• [PATCH] [POWERPC] bootwrapper: fix build error on virtex405-head.S   Josh Boyer
• [PATCH v2] [POWERPC] 4xx: Add endpoint support to 4xx PCIe driver   Josh Boyer
• [PATCH] Change the default link address for pSeries zImage kernels.   Josh Boyer
• [PATCH v2] [POWERPC] 4xx: Add endpoint support to 4xx PCIe driver   Josh Boyer
• [PATCH] ibm_newemac: Increase MDIO timeouts   Josh Boyer
• [RESEND][PATCH][POWERPC] PIKA Warp: Update platform code to supportRev B boards   Josh Boyer
• [PATCH] Add idle wait support for 44x platforms   Tony Breeds
• [PATCH 2.6.26?] Raise the upper limit of NR_CPUS.   Tony Breeds
• [PATCH 2.6.26?] Raise the upper limit of NR_CPUS.   Tony Breeds
• [PATCH 1/3] Raise the upper limit of NR_CPUS.   Tony Breeds
• [PATCH 2/3] Make iSeries spin on __secondary_hold_spinloop, like pSeries.   Tony Breeds
• [PATCH 3/3] Move the paca array into the BSS.   Tony Breeds
• [PATCH 1/3] Raise the upper limit of NR_CPUS.   Tony Breeds
• [PATCH 2/2] Make iSeries spin on __secondary_hold_spinloop, like pSeries.   Tony Breeds
• [PATCH 1/2 v2] Raise the upper limit of NR_CPUS.   Tony Breeds
• [PATCH 2/2] Make iSeries spin on __secondary_hold_spinloop, like pSeries.   Tony Breeds
• [PATCH 2/3 v3] Make iSeries spin on __secondary_hold_spinloop, like pSeries.   Tony Breeds
• [PATCH 1/3 v3] Raise the upper limit of NR_CPUS.   Tony Breeds
• [PATCH 3/3 v3] Move the paca array into the BSS.   Tony Breeds
• [PATCH 1/3 v3] Raise the upper limit of NR_CPUS.   Tony Breeds
• [PATCH 2/2] Raise the upper limit of NR_CPUS and move the pacas into the BSS.   Tony Breeds
• [PATCH 1/2 v4] Make iSeries spin on __secondary_hold_spinloop, like pSeries.   Tony Breeds
• [PATCH] Change the default link address for pSeries zImage kernels.   Tony Breeds
• 2.6.25: pmac_newworld undefined   Tony Breeds
• get_cycles()   Tony Breeds
• [PATCH] Change the default link address for pSeries zImage kernels.   Tony Breeds
• [PATCH] Allow builing of pmac32 when CONFIG_NVRAM=m   Tony Breeds
• BestComm/FEC Linux system crash   Rob Broersen
• [PATCH] Freescale QUICC Engine USB Host Controller   David Brownell
• [PATCH 4/5] [POWERPC] QE: implement support for the GPIO LIB API   David Brownell
• [PATCH 4/5] [POWERPC] QE: implement support for the GPIO LIB API   David Brownell
• [PATCH 4/5] [POWERPC] QE: implement support for the GPIO LIB API   David Brownell
• Enabling 64 bit data type for dma_addr_t on non PPC64 architecture   Becky Bruce
• Get new_emac driver running on 405EP   Markus Brunner
• Phy read timeout in ibm_new_emac driver   Markus Brunner
• [2.6 patch] powerpc/sysdev/rtc_cmos_setup.c: add MODULE_LICENSE   Adrian Bunk
• [2.6 patch] drivers/of/of_i2c.c: add MODULE_LICENSE   Adrian Bunk
• [2.6 patch] char/xilinx_hwicap/ section fix   Adrian Bunk
• [BUG] 2.6.25-git8 Kernel Bug while bootup on ppc and x86   Adrian Bunk
• 2.6.25: pmac_newworld undefined   Adrian Bunk
• 2.6.25: pmac_newworld undefined   Adrian Bunk
• [PATCH] Linux >=2.6.24 support for FEC on MPC5200 (not B!)   René Bürgel
• RFC: MPC5200 PSC AC97 driver   Peter Czanik
• [PATCH] Fix for disabling BUG   Marcelo Dalmas
• Carol Dann is out of the office.   Sheau-Jiuan Dann
• Patch: FW:Xilinx: BSP: Updated ML405 to matchhardwareusedfortesting   Guillaume Dargaud
• ARCH=ppc vs powerpc   Guillaume Dargaud
• ARCH=ppc vs powerpc   Guillaume Dargaud
• Booting a Xilinx board   Guillaume Dargaud
• Booting a Xilinx board   Guillaume Dargaud
• Booting a Xilinx board   Guillaume Dargaud
• zImage.embedded   Guillaume Dargaud
• zImage.embedded   Guillaume Dargaud
• zImage.embedded   Guillaume Dargaud
• Manual kernel parameters are being ignored   Guillaume Dargaud
• Manual kernel parameters are being ignored   Guillaume Dargaud
• [Buildroot] zImage.embedded   Guillaume Dargaud
• Xilinx network trouble   Guillaume Dargaud
• Xilinx network trouble (mostly solved)   Guillaume Dargaud
• Xilinx network trouble (mostly solved)   Guillaume Dargaud
• ML405 failed reboot   Guillaume Dargaud
• ML405 failed reboot   Guillaume Dargaud
• build breakage from of i2c helper patch   Jean Delvare
• [PATCH] [POWERPC] i2c: fix build breakage introduced by OF helpers   Jean Delvare
• [PATCH] rtc-pcf8563: Add device ids table   Jean Delvare
• [PATCH] rtc-pcf8563: Add device ids table   Jean Delvare
• [PATCH] rtc-pcf8563: Add device ids table   Jean Delvare
• [PATCH] mpc i2c driver, compare to NO_IRQ instead of zero   Jean Delvare
• [PATCH1/7] i2c: Add support for device alias names   Jean Delvare
• [PATCH] rtc-pcf8563: Add device ids table   Jean Delvare
• [PATCH 2/3] i2c: Convert all new-style drivers to use module aliasing   Jean Delvare
• [PATCH 0/2] i2c: Add support for device alias names   Jean Delvare
• [PATCH 1/2] i2c: Add support for device alias names   Jean Delvare
• [PATCH 2/2] i2c: Convert most new-style drivers to use module aliasing   Jean Delvare
• [PATCH 1/2] i2c: Add support for device alias names   Jean Delvare
• [PATCH 1/2] i2c: Add support for device alias names   Jean Delvare
• [PATCH 0/2 v2] i2c: Add support for device alias names   Jean Delvare
• [PATCH 1/2 v2] i2c: Add support for device alias names   Jean Delvare
• [PATCH 2/2 v2] i2c: Convert most new-style drivers to use module aliasing   Jean Delvare
• [PATCH 1/2 v2] i2c: Add support for device alias names   Jean Delvare
• Question on mpc52xx_common.c   Wolfgang Denk
• [PATCH] Add fast little-endian switch system call   Wolfgang Denk
• [RFC patch 6/9] POWERPC remove -traditional   Mathieu Desnoyers
• [RFC patch 6/9] POWERPC remove -traditional   Mathieu Desnoyers
• sysfs cpu entry   Kevin Diggs
• sysfs cpu entry   Kevin Diggs
• sysfs cpu entry   Kevin Diggs
• get_cycles()   Kevin Diggs
• get_cycles()   Kevin Diggs
• get_cycles()   Kevin Diggs
• pci_proc_init: proc_dir_entry '00' already registered   Alexey Dobriyan
• [PATCH] IB/ehca: extend query_device() and query_port() to support all values for ibv_devinfo   Roland Dreier
• [PATCH 5/5] IB/ehca: Bump version number to 0026   Roland Dreier
• IB/ehca: handle negative return value from ibmebus_request_irq() properly in ehca_create_eq()   Roland Dreier
• [PATCH] IB/ehca: Allocate event queue size depending on max number of CQs and QPs   Roland Dreier
• [REPOST][PATCH] IB/ehca: Allocate event queue size depending on max number of CQs and QPs   Roland Dreier
• pci issue - wrong detection of pci ressources   Michel Dänzer
• [PATCH 1/3] radeonfb: Fix 64 bits resources on 32 bits archs   Michel Dänzer
• [Linux-fbdev-devel] [PATCH 1/3] radeonfb: Fix 64 bits resources on 32 bits archs   Michel Dänzer
• [kvm-devel] [PATCH 4 of 4] [KVM POWERPC] PowerPC 440 KVM implementation   Christian Ehrhardt
• pci issue - wrong detection of pci ressources   Christian Ehrhardt
• pci issue - wrong detection of pci ressources   Christian Ehrhardt
• pci issue - wrong detection of pci ressources   Christian Ehrhardt
• pci issue - wrong detection of pci ressources   Christian Ehrhardt
• pci issue - wrong detection of pci ressources   Christian Ehrhardt
• pci issue - wrong detection of pci ressources   Christian Ehrhardt
• [PATCH 1/3] radeonfb: Fix 64 bits resources on 32 bits archs   Christian Ehrhardt
• [PATCH] Add idle power save for ppc 4xx   Michael Ellerman
• [PATCH] Add idle power save for ppc 4xx   Michael Ellerman
• [PATCH] Make #include <sysdev/foo.h> work for 64-bit powerpc   Michael Ellerman
• [RFC/PATCH 1/4] Move xics_setup_8259_cascade() into platforms/pseries/setup.c   Michael Ellerman
• [RFC/PATCH 2/4] Turn xics_setup_8259_cascade() into a generic pseries_setup_i8259_cascade()   Michael Ellerman
• [RFC/PATCH 3/4] Use pseries_setup_i8259_cascade() in pseries_mpic_init_IRQ()   Michael Ellerman
• [RFC/PATCH 4/4] Simplify xics direct/lpar irq_host setup   Michael Ellerman
• [PATCH] Make #include <sysdev/foo.h> work for 64-bit powerpc   Michael Ellerman
• [BUG] 2.6.25-rc8-mm1 kernel panic while bootup on powerpc   Michael Ellerman
• [PATCH 1/3] powerpc: Add support for Wind River SBC8641D board   Michael Ellerman
• [PATCH 1/2] Move prototype for find_udbg_vterm() into a header file   Michael Ellerman
• [PATCH 2/2] Always add preferred consoles in platforms/pseries/lpar.c   Michael Ellerman
• More patches pushed to powerpc.git master and powerpc-next branches (second try)   Michael Ellerman
• [PATCH 1/2] Add thread_info_cache_init() to all archs   Michael Ellerman
• [RFC/PATCH 3/4] Use pseries_setup_i8259_cascade() in pseries_mpic_init_IRQ()   Michael Ellerman
• [PATCH 02/11] Add udbg_console_anytime() which sets udbg console to CON_ANYTIME   Michael Ellerman
• [PATCH 01/11] Set udbg_console index to 0   Michael Ellerman
• [PATCH 03/11] Register udbg console early on pseries LPAR   Michael Ellerman
• [PATCH 04/11] Convert from DBG() to pr_debug() in platforms/pseries/setup.c   Michael Ellerman
• [PATCH 05/11] Convert from DBG() to pr_debug() in platforms/pseries/smp.c   Michael Ellerman
• [PATCH 06/11] Convert from DBG() to pr_debug() in platforms/pseries/firmware.c   Michael Ellerman
• [PATCH 07/11] Convert from DBG() to pr_debug() in platforms/pseries/iommu.c   Michael Ellerman
• [PATCH 08/11] Convert from DBG() to pr_debug() in platforms/pseries/lpar.c   Michael Ellerman
• [PATCH 09/11] Convert from DEBUG() to pr_debug() in platforms/pseries/rtasd.c   Michael Ellerman
• [PATCH 10/11] Convert from DEBUG() to pr_debug() in platforms/pseries/scanlog.c   Michael Ellerman
• [PATCH 11/11] Add CONFIG_PPC_PSERIES_DEBUG to enable debugging for platforms/pseries   Michael Ellerman
• [PATCH 2.6.26?] Raise the upper limit of NR_CPUS.   Michael Ellerman
• [PATCH 1/3] MSI driver for Freescale 83xx/85xx/86xx cpu   Michael Ellerman
• [PATCH 2.6.26?] Raise the upper limit of NR_CPUS.   Michael Ellerman
• [PATCH 1/3] MSI driver for Freescale 83xx/85xx/86xx cpu   Michael Ellerman
• Question on MPC83xx interrupts   Michael Ellerman
• [PATCH 1/3 v3] Raise the upper limit of NR_CPUS.   Michael Ellerman
• [PATCH 02/11] Add udbg_console_anytime() which sets udbg console to CON_ANYTIME   Michael Ellerman
• [PATCH 04/11] Convert from DBG() to pr_debug() in platforms/pseries/setup.c   Michael Ellerman
• [PATCH 1/3] MSI driver for Freescale 83xx/85xx/86xx cpu   Michael Ellerman
• [PATCH 2/2 v2] mpic_u3msi: mpic_u3msi: failed allocation unnoticed   Michael Ellerman
• [PATCH] Discourage people from fiddling with kernel data from prom_init   Michael Ellerman
• [PATCH] Use of_get_next_parent() in platforms/cell/axon_msi.c   Michael Ellerman
• [PATCH 2/2] Raise the upper limit of NR_CPUS and move the pacas into the BSS.   Michael Ellerman
• [PATCH 1/5] Set udbg_console index to 0   Michael Ellerman
• [PATCH 2/5] Mark udbg console as CON_ANYTIME, ie. callable early in boot   Michael Ellerman
• [PATCH 3/5] Register udbg console early on pseries LPAR   Michael Ellerman
• [PATCH 4/5] Convert from DBG() to pr_debug() in platforms/pseries/   Michael Ellerman
• [PATCH 5/5] Add CONFIG_PPC_PSERIES_DEBUG to enable debugging for platforms/pseries   Michael Ellerman
• LMB regression...   Michael Ellerman
• [PATCH] Make emergency stack safe for current_thread_info() use   Michael Ellerman
• [PATCH] Fix crashkernel= handling when no crashkernel= specified   Michael Ellerman
• [PATCH] Merge Axon MSI trigger debugging   Michael Ellerman
• RFC: Possible section mismatch problem in ibm_newemac?   Steven A. Falco
• [PATCH 4/9] [POWERPC] mv64x60: Fix FDT compatible names: mv64x60 => mv64360   Dale Farnsworth
• [PATCH 6/9] [POWERPC] prpmc2800: clean up dts properties   Dale Farnsworth
• [PATCH 1/9] [POWERPC] mv64x60: change FDT compatible prefix to mrvl   Dale Farnsworth
• [RFC/PATCH] powerpc: Add irqtrace support to 32-bit powerpc   Dale Farnsworth
• [PATCH v2] powerpc: Add irqtrace support for 32-bit powerpc   Dale Farnsworth
• [PATCH v2] powerpc: Add irqtrace support for 32-bit powerpc   Dale Farnsworth
• [PATCH v2] powerpc: Add irqtrace support for 32-bit powerpc   Dale Farnsworth
• [PATCH v2] powerpc: Add irqtrace support for 32-bit powerpc   Dale Farnsworth
• [PATCH v2] powerpc: Add irqtrace support for 32-bit powerpc   Dale Farnsworth
• [PATCH v3] powerpc: Add irqtrace support for 32-bit powerpc   Dale Farnsworth
• [PATCH 0/9 v2] powerpc: mv64x60 and prpmc2800 DTS cleanups   Dale Farnsworth
• [PATCH 1/9 v2] powerpc: change FDT compatible prefix to mrvl   Dale Farnsworth
• [PATCH 2/9 v2] powerpc: prpmc2800: convert DTS to v1 and add labels   Dale Farnsworth
• [PATCH 3/9 v2] powerpc: fix frequencies in prpmc2800.dts   Dale Farnsworth
• [PATCH 4/9 v2] powerpc: mv64x60: Fix FDT compatible names: mv64x60 => mv64360   Dale Farnsworth
• [PATCH 5/9 v2] powerpc: mv64x60: remove device tree absolute path references   Dale Farnsworth
• [PATCH 6/9 v2] powerpc: prpmc2800: clean up dts properties   Dale Farnsworth
• [PATCH 7/9 v2] powerpc: mv643xx_eth: prepare to support multiple silicon blocks   Dale Farnsworth
• [PATCH 8/9 v2] powerpc: Document the mv64x60 device tree bindings   Dale Farnsworth
• [PATCH 9/9 v2] powerpc: prpmc2800 needs a dtbImage   Dale Farnsworth
• [PATCH 1/9 v2] powerpc: change FDT compatible prefix to mrvl   Dale Farnsworth
• [PATCH 0/8 v3] [POWERPC] mv64x60 and prpmc2800 DTS cleanups   Dale Farnsworth
• [PATCH 1/8 v3] [POWERPC] prpmc2800: convert DTS to v1 and add labels   Dale Farnsworth
• [PATCH 2/8 v3] [POWERPC] prpmc2800: fix frequencies in prpmc2800.dts   Dale Farnsworth
• [PATCH 3/8 v3] [POWERPC] mv64x60: Fix FDT compatible names: mv64x60 => mv64360   Dale Farnsworth
• [PATCH 4/8 v3] [POWERPC] mv64x60: remove device tree absolute path references   Dale Farnsworth
• [PATCH 5/8 v3] [POWERPC] prpmc2800: clean up dts properties   Dale Farnsworth
• [PATCH 6/8 v3] [POWERPC] mv643xx_eth: prepare to support multiple silicon blocks   Dale Farnsworth
• [PATCH 7/8 v3] [POWERPC] Document the mv64x60 device tree bindings   Dale Farnsworth
• [PATCH 8/8 v3] [POWERPC] prpmc2800 needs a dtbImage   Dale Farnsworth
• [PATCH 1/3] powerpc: Add support for Wind River SBC8641D board   Dale Farnsworth
• Warp patches for 2.6.26   Dale Farnsworth
• Warp patches for 2.6.26   Dale Farnsworth
• Warp patches for 2.6.26   Dale Farnsworth
• [PATCH 2/5] [POWERPC] QE: add support for QE USB clocks routing   Dale Farnsworth
• [PATCH 2/5] [POWERPC] QE: add support for QE USB clocks routing   Dale Farnsworth
• [PATCH] sysdev,mv64x60: initialization of mv64x60 ethernet, serial and I2C   Dale Farnsworth
• [PATCH 1/2 v2] sysdev,mv64x60: I2C defaults   Dale Farnsworth
• [PATCH 2/2 v2] sysdev,mv64x60: initialization of mv64x60 ethernet, serial and I2C   Dale Farnsworth
• [PATCH 2/2 v3] sysdev,mv64x60: initialization of mv64x60 ethernet, serial and I2C   Dale Farnsworth
• [PATCH] sysdev,mv64x60: early console fix   Dale Farnsworth
• [PATCH 00/10] powerpc: Add kexec/kdump support for ppc32   Dale Farnsworth
• [PATCH] sysdev,mv64x60: MV64x60 device bus   Dale Farnsworth
• [PATCH] sysdev,mv64x60: MV64x60 device bus   Dale Farnsworth
• [PATCH v3] sysdev,mv64x60: MV64x60 device bus   Dale Farnsworth
• [PATCH 0/5] IB/ehca: IB compliance fix, tracing verbosity and module parameters   Joachim Fenkes
• [PATCH 1/5] IB/ehca: Prevent posting of SQ WQEs if QP not in RTS   Joachim Fenkes
• [PATCH 2/5] IB/ehca: Move high-volume debug output to higher debug levels   Joachim Fenkes
• [PATCH 3/5] IB/ehca: Remove mr_largepage parameter   Joachim Fenkes
• [PATCH 4/5] IB/ehca: Make some module parameters bool, update descriptions   Joachim Fenkes
• [PATCH 5/5] IB/ehca: Bump version number to 0026   Joachim Fenkes
• [PATCH 1/5] IB/ehca: Prevent posting of SQ WQEs if QP not in RTS   Joachim Fenkes
• [PATCH] ibm_newemac: Increase MDIO timeouts   Bill Fink
• [PATCH 0/5] dynamic detection of gianfar TPIPA   Andy Fleming
• [PATCH v2.6.26] gianfar: Determine TBIPA value dynamically   Andy Fleming
• [PATCH v2.6.26] gianfar: Determine TBIPA value dynamically   Andy Fleming
• [PATCH v2.6.26] gianfar: Determine TBIPA value dynamically   Andy Fleming
• [PATCH v2.6.26] powerpc: Add 8568 PHY workaround to board code   Andy Fleming
• [PATCH v2.6.26] gianfar: Add support for multiple gfar mdio interfaces   Andy Fleming
• SKB corruption on heavy traffic   Franca, Jose (NSN - PT/Portugal - MiniMD)
• SKB corruption on heavy traffic   Franca, Jose (NSN - PT/Portugal - MiniMD)
• FW: SKB corruption on heavy traffic   Franca, Jose (NSN - PT/Portugal - MiniMD)
• FW: SKB corruption on heavy traffic   Franca, Jose (NSN - PT/Portugal - MiniMD)
• psc and spi   S. Fricke
• [PATCH] [POWERPC] CPM1: implement GPIO LIB API   Jochen Friedrich
• [PATCH0/7] OF support for i2c bus drivers   Jochen Friedrich
• [PATCH1/7] i2c: Add support for device alias names   Jochen Friedrich
• [PATCH2/7] i2c: Convert all new-style drivers to use module aliasing   Jochen Friedrich
• [PATCH3/7] i2c: OF helpers for the i2c API   Jochen Friedrich
• [PATCH4/7] i2c: Convert PowerPC MPC i2c to of_platform_driver from platform_driver   Jochen Friedrich
• [PATCH5/7] i2c: Kill the old driver matching scheme   Jochen Friedrich
• [PATCH6/7] i2c: adds support for i2c bus on Freescale CPM1/CPM2 controllers   Jochen Friedrich
• [PATCH7/7] [POWERPC] Add i2c pins to dts and board setup   Jochen Friedrich
• [PATCHv2 3/7] i2c: OF helpers for the i2c API   Jochen Friedrich
• [PATCH3/7] i2c: OF helpers for the i2c API   Jochen Friedrich
• [PATCHv2 7/7] [POWERPC] Add i2c pins to dts and board setup   Jochen Friedrich
• build breakage from of i2c helper patch   Jochen Friedrich
• [PATCH] powerpc: Implement GPIO LIB API on CPM2 Freescale SoC.   Jochen Friedrich
• [PATCH] powerpc: Implement GPIO LIB API on CPM2 Freescale SoC.   Jochen Friedrich
• [PATCH] powerpc: Implement GPIO LIB API on CPM2 Freescale SoC.   Jochen Friedrich
• [PATCH] powerpc: Implement GPIO LIB API on CPM2 Freescale SoC.   Jochen Friedrich
• build breakage from of i2c helper patch   Jochen Friedrich
• build breakage from of i2c helper patch   Jochen Friedrich
• [PATCHv3 3/7] i2c: OF helpers for the i2c API   Jochen Friedrich
• [PATCH] [POWERPC] i2c: fix build breakage introduced by OF helpers   Jochen Friedrich
• [PATCH1/2] [POWERPC] CPM2: Implement GPIO LIB API on CPM2 Freescale SoC.   Jochen Friedrich
• [PATCH2/2] [POWERPC] CPM1: implement GPIO LIB API on CPM1 Freescale SoC.   Jochen Friedrich
• [PATCHv2 1/2] [POWERPC] CPM2: Implement GPIO LIB API on CPM2 Freescale SoC.   Jochen Friedrich
• [PATCH] rtc-pcf8563: Add device ids table   Jochen Friedrich
• [2.6 patch] drivers/of/of_i2c.c: add MODULE_LICENSE   Jochen Friedrich
• [PATCH] rtc-pcf8563: Add device ids table   Jochen Friedrich
• [PATCH] rtc-pcf8563: Add device ids table   Jochen Friedrich
• [i2c] platform_data when using of?   Jochen Friedrich
• [PATCH1/7] i2c: Add support for device alias names   Jochen Friedrich
• [i2c] [PATCH 0/2] i2c: Add support for device alias names   Jochen Friedrich
• [PATCH] [POWERPC] fsldma: Use compatiable binding as spec   Kumar Gala
• [PATCH] [POWERPC] Fix defconfigs so we dont set both GENRTC and RTCLIB   Kumar Gala
• Please pull from 'for-2.6.25' branch   Kumar Gala
• [PATCH 00/11] ppc32 mm init clean and 85xx kernel reloc   Kumar Gala
• [PATCH 01/11] [POWERPC] bootwrapper: Allow specifying of image physical offset   Kumar Gala
• [PATCH 02/11] [POWERPC] Remove Kconfig option BOOT_LOAD   Kumar Gala
• [PATCH 03/11] [POWERPC] Provide access to arch/powerpc include path on ppc64   Kumar Gala
• [PATCH 04/11 v2] [POWERPC] Remove and replace uses of PPC_MEMSTART with memstart_addr   Kumar Gala
• [PATCH 05/11] [POWERPC] Introduce lowmem_end_addr to distiguish from total_lowmem   Kumar Gala
• [PATCH 06/11] [POWERPC] 85xx: Cleanup TLB initialization   Kumar Gala
• [PATCH 07/11] [POWERPC] Use lowmem_end_addr to limit lmb allocations on ppc32   Kumar Gala
• [PATCH 08/11 v2] [POWERPC] Rename __initial_memory_limit to __initial_memory_limit_addr   Kumar Gala
• [PATCH 09/11] [POWERPC] Clean up some linker and symbol usage   Kumar Gala
• [PATCH 10/11] [POWERPC] Move phys_addr_t definition into asm/types.h   Kumar Gala
• [PATCH 11/11] [POWERPC] 85xx: Add support for relocatble kernel (and booting at non-zero)   Kumar Gala
• [PATCH 3/3] sata_fsl: reduce compatibility to fsl,pq-sata   Kumar Gala
• [PATCH 2/3] mpc83xx: enable usb in 837x rdb and 83xx defconfigs   Kumar Gala
• [PATCH] Make #include <sysdev/foo.h> work for 64-bit powerpc   Kumar Gala
• [PATCH 04/11 v2] [POWERPC] Remove and replace uses of PPC_MEMSTART with memstart_addr   Kumar Gala
• [PATCH 01/11] [POWERPC] bootwrapper: Allow specifying of image physical offset   Kumar Gala
• [PATCH] [POWERPC] Move phys_addr_t definition into asm/types.h   Kumar Gala
• Please pull from 'for-2.6.25' branch   Kumar Gala
• [PATCH] [POWERPC] Move phys_addr_t definition into asm/types.h   Kumar Gala
• Please pull from 'for-2.6.25' branch   Kumar Gala
• [PATCH 01/11] [POWERPC] bootwrapper: Allow specifying of image physical offset   Kumar Gala
• [PATCH] [POWERPC] Fix a mm compile error   Kumar Gala
• [PATCH] [POWERPC] Update linker script to properly set physical addresses   Kumar Gala
• Please pull from 'for-2.6.25' branch [UPDATED]   Kumar Gala
• [PATCH] powerpc: Fix CPM2 SCC1 clock initialization.   Kumar Gala
• [PATCH 01/11] [POWERPC] bootwrapper: Allow specifying of image physical offset   Kumar Gala
• [RFC][PATCH] initial port of fixmap over from x86 for ppc32   Kumar Gala
• [PATCH] [POWERPC] Update linker script to properly set physical addresses   Kumar Gala
• [RFC][PATCH] initial port of fixmap over from x86 for ppc32   Kumar Gala
• [RFC][PATCH] initial port of fixmap over from x86 for ppc32   Kumar Gala
• 4xx defconfig reorg   Kumar Gala
• Status of patches (ppc32 mm init clean and 85xx kernel reloc)   Kumar Gala
• [RFC][PATCH] initial port of fixmap over from x86 for ppc32   Kumar Gala
• [PATCH] [POWERPC] Rework Book-E debug exception handling   Kumar Gala
• [PATCH] [POWERPC] 83xx/85xx: Reorganize defconfigs   Kumar Gala
• [PATCH] [POWERPC] 83xx/85xx: Reorganize defconfigs   Kumar Gala
• [PATCH] [POWERPC] Make Book-E debug handling SMP safe   Kumar Gala
• [PATCH] mpc8540 : Fix restart   Kumar Gala
• [PATCH] [POWERPC] 83xx/85xx: Reorganize defconfigs   Kumar Gala
• [PATCH] [POWERPC] 83xx/85xx: Reorganize defconfigs   Kumar Gala
• Status of patches (ppc32 mm init clean and 85xx kernel reloc)   Kumar Gala
• [PATCH 00/12 v3] [POWERPC] ppc32 mm init clean and 85xx kernel reloc   Kumar Gala
• [PATCH 01/12] [POWERPC] Remove Kconfig option BOOT_LOAD   Kumar Gala
• [PATCH 02/12] [POWERPC] Provide access to arch/powerpc include path on ppc64   Kumar Gala
• [PATCH 03/12] [POWERPC] Remove and replace uses of PPC_MEMSTART with memstart_addr   Kumar Gala
• [PATCH 04/12] [POWERPC] Introduce lowmem_end_addr to distiguish from total_lowmem   Kumar Gala
• [PATCH 05/12] [POWERPC] 85xx: Cleanup TLB initialization   Kumar Gala
• [PATCH 06/12] [POWERPC] Use lowmem_end_addr to limit lmb allocations on ppc32   Kumar Gala
• [PATCH 07/12] [POWERPC] Rename __initial_memory_limit to __initial_memory_limit_addr   Kumar Gala
• [PATCH 08/12] [POWERPC] Clean up some linker and symbol usage   Kumar Gala
• [PATCH 09/12] [POWERPC] Move phys_addr_t definition into asm/types.h   Kumar Gala
• [PATCH 10/12] [POWERPC] Update linker script to properly set physical addresses   Kumar Gala
• [PATCH 11/12] [POWERPC] bootwrapper: use physical address in PHDR for uImage   Kumar Gala
• [PATCH 12/12] [POWERPC] 85xx: Add support for relocatble kernel (and booting at non-zero)   Kumar Gala
• [PATCH 01/11] [POWERPC] bootwrapper: Allow specifying of image physical offset   Kumar Gala
• Patches added to powerpc.git powerpc-next and master branches   Kumar Gala
• Patches added to powerpc.git powerpc-next and master branches   Kumar Gala
• patches for 2.6.26   Kumar Gala
• Patches added to powerpc.git powerpc-next and master branches   Kumar Gala
• Patches added to powerpc.git powerpc-next and master branches   Kumar Gala
• ppc64 build issue   Kumar Gala
• [PATCHv4 0/5] cpm2: Reset the CPM at startup and fix the cpm_uart driver accordingly.   Kumar Gala
• [PATCH v2] E500 Make steal_context SMP-safe.   Kumar Gala
• patches for 2.6.26   Kumar Gala
• How to pass information from the bootloader to the kernel ?   Kumar Gala
• [PATCH 6/13] devres: implement managed iomap interface   Kumar Gala
• [PATCH 6/13] devres: implement managed iomap interface   Kumar Gala
• [PATCH] CPM: Always use new binding.   Kumar Gala
• [PATCH 1/8] [POWERPC] fsl_elbc_nand: factor out localbus defines   Kumar Gala
• [PATCH 2/8] [POWERPC] fsl_lbc: implement few routines to manage FSL UPMs   Kumar Gala
• [PATCH 2/2] [POWERPC] UCC nodes cleanup   Kumar Gala
• [PATCH] CPM: Always use new binding.   Kumar Gala
• [PATCH 2/2] [POWERPC] UCC nodes cleanup   Kumar Gala
• [PATCH 2/2] [POWERPC] UCC nodes cleanup   Kumar Gala
• [PATCH 2/2] [POWERPC] UCC nodes cleanup   Kumar Gala
• [PATCH 1/8] [POWERPC] fsl_elbc_nand: factor out localbus defines   Kumar Gala
• [PATCH 2/8] [POWERPC] fsl_lbc: implement few routines to manage FSL UPMs   Kumar Gala
• [PATCH 3/8] [POWERPC] qe_lib: implement qe_muram_offset   Kumar Gala
• [PATCH 4/8] [POWERPC] immap_qe.h should include asm/io.h   Kumar Gala
• [PATCH 5/8] [POWERPC] qe_lib: export qe_get_brg_clk()   Kumar Gala
• [PATCH 8/8] [POWERPC] qe_io: fix sparse warnings   Kumar Gala
• [PATCH 0/8] A bit of new code and sparse cleanups along the way   Kumar Gala
• [PATCH] mpc8540 : Fix restart   Kumar Gala
• [PATCH] [POWERPC] mpc8315: fix USB UTMI Host setup   Kumar Gala
• [PATCH] CPM: Always use new binding.   Kumar Gala
• [PATCH] Make rheap safe for spinlocks   Kumar Gala
• [PATCH 7/8] [POWERPC] qe_lib: add support for QE USB   Kumar Gala
• [PATCH 03/12] [POWERPC] Remove and replace uses of PPC_MEMSTART with memstart_addr   Kumar Gala
• [PATCH] [POWERPC] Make Book-E debug handling SMP safe   Kumar Gala
• [PATCH 03/12] [POWERPC] Remove and replace uses of PPC_MEMSTART with memstart_addr   Kumar Gala
• [PATCH 09/12] [POWERPC] Move phys_addr_t definition into asm/types.h   Kumar Gala
• [PATCH 12/12] [POWERPC] 85xx: Add support for relocatble kernel (and booting at non-zero)   Kumar Gala
• fec_mpc5200: reset FEC on error   Kumar Gala
• [PATCH 00/13 v4] [POWERPC] ppc32 mm init clean and 85xx kernel reloc   Kumar Gala
• [PATCH 01/13] [POWERPC] Remove Kconfig option BOOT_LOAD   Kumar Gala
• [PATCH 02/13] [POWERPC] Provide access to arch/powerpc include path on ppc64   Kumar Gala
• [PATCH 03/13] [POWERPC] Remove and replace uses of PPC_MEMSTART with memstart_addr   Kumar Gala
• [PATCH 04/13] [POWERPC] Introduce lowmem_end_addr to distiguish from total_lowmem   Kumar Gala
• [PATCH 05/13] [POWERPC] 85xx: Cleanup TLB initialization   Kumar Gala
• [PATCH 06/13] [POWERPC] Use lowmem_end_addr to limit lmb allocations on ppc32   Kumar Gala
• [PATCH 07/13] [POWERPC] Rename __initial_memory_limit to __initial_memory_limit_addr   Kumar Gala
• [PATCH 08/13] [POWERPC] Clean up some linker and symbol usage   Kumar Gala
• [PATCH 09/13] [POWERPC] Move phys_addr_t definition into asm/types.h   Kumar Gala
• [PATCH 10/13] [POWERPC] Update linker script to properly set physical addresses   Kumar Gala
• [PATCH 11/13] [POWERPC] bootwrapper: use physical address in PHDR for uImage   Kumar Gala
• [PATCH 12/13] [POWERPC] Cleanup pgtable-ppc32.h   Kumar Gala
• [PATCH 13/13] [POWERPC] 85xx: Add support for relocatble kernel (and booting at non-zero)   Kumar Gala
• [PATCH] mpc8313erdb: Update defconfig, enabling FCM NAND and OF partitions   Kumar Gala
• [PATCH 13/13 v5] [POWERPC] 85xx: Add support for relocatble kernel (and booting at non-zero)   Kumar Gala
• [PATCH] fsl_soc: Factor fsl_get_sys_freq() out of the wdt and spi inits.   Kumar Gala
• [PATCH 12/12] [POWERPC] 85xx: Add support for relocatble kernel (and booting at non-zero)   Kumar Gala
• [PATCH] 86xx: mark functions static, other minor cleanups   Kumar Gala
• [PATCH] [POWERPC] 83xx: mpc837x_rdb: add simple-bus compatible matching   Kumar Gala
• [RESEND PATCH] cuboot-pq2: PCI fixes   Kumar Gala
• [PATCH] mpc8313erdb: Update defconfig, enabling FCM NAND and OF partitions   Kumar Gala
• [PATCH] fsl_soc: Factor fsl_get_sys_freq() out of the wdt and spi inits.   Kumar Gala
• [PATCH 1/3] powerpc: Add support for Wind River SBC8641D board   Kumar Gala
• [PATCH 2/3] powerpc: Add device tree source for Wind River SBC8641D   Kumar Gala
• [PATCH 3/3] powerpc: Add defconfig for Wind River SBC8641D board   Kumar Gala
• [PATCH] 86xx: mark functions static, other minor cleanups   Kumar Gala
• [PATCH 12/12] [POWERPC] 85xx: Add support for relocatble kernel (and booting at non-zero)   Kumar Gala
• [PATCH v2.6.26 0/2] Dynamic TBIPA for gianfar   Kumar Gala
• some highmem questions   Kumar Gala
• [PATCH] [POWERPC] Remove unused machine call outs   Kumar Gala
• [PATCH v2.6.26 0/2] Dynamic TBIPA for gianfar   Kumar Gala
• Please pull from 'powerpc-next' branch   Kumar Gala
• a question about serial driver on MPC8313   Kumar Gala
• USB on MPC8641D   Kumar Gala
• build breakage from of i2c helper patch   Kumar Gala
• USB on MPC8641D   Kumar Gala
• [PATCH v2][POWERPC] qe_lib and ucc_geth: switch to the cpm_muram implementation   Kumar Gala
• [PATCH v6] [POWERPC] 85xx: Add support for relocatble kernel (and booting at non-zero)   Kumar Gala
• [PATCH] [POWERPC] fsl: Convert dts to v1 syntax   Kumar Gala
• [PATCH] [POWERPC] mpc8315: fix USB UTMI Host setup   Kumar Gala
• [PATCH] Make rheap safe for spinlocks   Kumar Gala
• [PATCH 1/2] 86xx: mark functions static, other minor cleanups   Kumar Gala
• [PATCH for 2.6.26] Fix the size of qe muram for MPC8568E   Kumar Gala
• [PATCH 2/2] mpc86xx_hpcn: Temporarily accept old dts node identifier.   Kumar Gala
• [PATCH] [POWERPC] fsl: Convert dts to v1 syntax   Kumar Gala
• [PATCH] rtc-pcf8563: Add device ids table   Kumar Gala
• [PATCH 3/5] [POWERPC] QE: split par_io_config_pin()   Kumar Gala
• [PATCH 4/5] [POWERPC] QE: implement support for the GPIO LIB API   Kumar Gala
• [PATCH 4/5] [POWERPC] QE: implement support for the GPIO LIB API   Kumar Gala
• [PATCH] [POWERPC] Port fixmap from x86 and use for kmap_atomic   Kumar Gala
• [PATCH 1/5] [POWERPC] sysdev: implement FSL GTM support   Kumar Gala
• [PATCH] Fix the wrong serial1 interrupt for 8610 board   Kumar Gala
• [PATCH v3] powerpc: Add irqtrace support for 32-bit powerpc   Kumar Gala
• Patches added to powerpc.git master and powerpc-next branches   Kumar Gala
• [PATCH v2.6.26] powerpc: Add 8568 PHY workaround to board code   Kumar Gala
• [PATCH 04/15] [PPC] minor irq handler cleanups   Kumar Gala
• removal of arch/ppc in 2.6.27?   Kumar Gala
• [PATCH] [PPC] Remove mpc8272 ads board from arch/ppc   Kumar Gala
• [PATCH] [PPC] Remove mpc885ads and mpc86x ads boards from arch/ppc   Kumar Gala
• [PATCH] [PPC] Remove mpc8272 ads board from arch/ppc   Kumar Gala
• [PATCH] [POWERPC] Port fixmap from x86 and use for kmap_atomic   Kumar Gala
• Patches added to powerpc.git master and powerpc-next branches   Kumar Gala
• [PATCH v7] [POWERPC] 85xx: Add support for relocatable kernel (and booting at non-zero)   Kumar Gala
• [PATCH] [POWERPC] ppc32: Fix errata for 603 CPUs   Kumar Gala
• [PATCH v2] [POWERPC] ppc32: Fix errata for 603 CPUs   Kumar Gala
• [PATCH] [POWERPC] ppc32: Fix errata for 603 CPUs   Kumar Gala
• [PATCH] [POWERPC] ppc32: Fix errata for 603 CPUs   Kumar Gala
• [PATCH] [POWERPC] ppc32: Fix errata for 603 CPUs   Kumar Gala
• [PATCH v2] MSI driver for Freescale 83xx/85xx/86xx cpu   Kumar Gala
• Patches added to powerpc.git master and powerpc-next branches   Kumar Gala
• [PATCH v2] [POWERPC] Port fixmap from x86 and use for kmap_atomic   Kumar Gala
• [PATCH] [POWERPC] Clean up access to thread_info in assembly   Kumar Gala
• [PATCH] [POWERPC] Cleanup asm-offset.c   Kumar Gala
• [PATCH] spi_mpc83xx: test below 0 on unsigned irq in mpc83xx_spi_probe()   Kumar Gala
• Please pull from 'powerpc-next' branch   Kumar Gala
• Please pull from 'powerpc-next' branch   Kumar Gala
• [PATCH] [POWERPC] cleanup misc_64.S   Kumar Gala
• [RFC][WIP][PATCH] Add IRQSTACKS to ppc32   Kumar Gala
• [PATCH 00/10] powerpc: Add kexec/kdump support for ppc32   Kumar Gala
• [RFC][WIP][PATCH] Add IRQSTACKS to ppc32   Kumar Gala
• [PATCH] [POWERPC] Add IRQSTACKS support on ppc32   Kumar Gala
• [RFC][WIP][PATCH] Add IRQSTACKS to ppc32   Kumar Gala
• [PATCH 00/10] powerpc: Add kexec/kdump support for ppc32   Kumar Gala
• [PATCH] [POWERPC] spufs: add .gitignore for spu_save_dump.h & spu_restore_dump.h   Kumar Gala
• [PATCH] [POWERPC] Update .gitignore file   Kumar Gala
• [PATCH] [POWERPC] spufs: add .gitignore for spu_save_dump.h & spu_restore_dump.h   Kumar Gala
• [PATCH] [POWERPC] spufs: add .gitignore for spu_save_dump.h & spu_restore_dump.h   Kumar Gala
• sysfs cpu entry   Kumar Gala
• [RFC][WIP][PATCH] Add IRQSTACKS to ppc32   Kumar Gala
• [PATCH v2] [POWERPC] 4xx: Add endpoint support to 4xx PCIe driver   Kumar Gala
• [PATCH] [POWERPC] Add IRQSTACKS support on ppc32   Kumar Gala
• [PATCH] [POWERPC] Add IRQSTACKS support on ppc32   Kumar Gala
• [PATCH v2] [POWERPC] Add IRQSTACKS support on ppc32   Kumar Gala
• [PATHC V3] Watchdog on MPC85xx SMP system   Kumar Gala
• suggestions on handling additional exception levels on ppc32   Kumar Gala
• suggestions on handling additional exception levels on ppc32   Kumar Gala
• suggestions on handling additional exception levels on ppc32   Kumar Gala
• [PATCH] devres: support addresses greater than an unsigned long via dev_ioremap   Kumar Gala
• overloading existing PTRACE_GET_DEBUGREG/PTRACE_SET_DEBUGREG commands   Kumar Gala
• [PATCH] [POWERPC] convert transfer_to_handler into a macro   Kumar Gala
• [PATCH] devres: support addresses greater than an unsigned long via dev_ioremap   Kumar Gala
• [PATCH][RESEND] devres: support addresses greater than an unsigned long via dev_ioremap   Kumar Gala
• cross tool netbsd 3.0 target   Kumar Gala
• [PATCH 3/3] [POWERPC] 86xx: mpc8610_hpcd: use ULI526X driver for on-board ethernet   Kumar Gala
• [PATCH] [POWERPC] convert transfer_to_handler into a macro   Kumar Gala
• [PATCH] [POWERPC] convert transfer_to_handler into a macro   Kumar Gala
• [PATCH] [POWERPC] convert transfer_to_handler into a macro   Kumar Gala
• [PATCH] [POWERPC] convert transfer_to_handler into a macro   Kumar Gala
• [PATCH] [POWERPC] Move to runtime allocated exception stacks   Kumar Gala
• [PATCH] [POWERPC] Rework EXC_LEVEL_EXCEPTION_PROLOG code   Kumar Gala
• [PATCH] [POWERPC] 40x/Book-E: Save/restore volatile exception registers   Kumar Gala
• [PATCH] [POWERPC] Set lower flag bits in regs->trap to indicate debug level exception   Kumar Gala
• [patch] PS3: Fix gelic net module dependency   Jeff Garzik
• [PATCH] fs_enet: Don't call NAPI functions when NAPI is not used.   Jeff Garzik
• [PATCH] natsemi: fix for PPC 44x platforms   Jeff Garzik
• [PATCH] ehea: Fix DLPAR memory add support   Jeff Garzik
• [PATCH 1/2] ibm_newemac: PowerPC 440GX EMAC PHY clock workaround   Jeff Garzik
• [PATCH 1/2] ibm_newemac: PowerPC 440GX EMAC PHY clock workaround   Jeff Garzik
• [PATCH] natsemi: fix MMIO for PPC 44x platforms   Jeff Garzik
• [PATCH 04/15] [PPC] minor irq handler cleanups   Jeff Garzik
• [PATCH 1/6] ibm_newemac: Fix problem with jumbo frame support and EMAC V4.patch   Jeff Garzik
• [PATCH] ibm_newemac: Increase MDIO timeouts   Jeff Garzik
• [PATCH] devres: support addresses greater than an unsigned long via dev_ioremap   Jeff Garzik
• cpm2.c error in cpm2_clk_setup   Matt Gessner
• [PATCH 1/9] [POWERPC] mv64x60: change FDT compatible prefix to mrvl   David Gibson
• [PATCH 6/9] [POWERPC] prpmc2800: clean up dts properties   David Gibson
• [PATCH 3/3][POWERPC][V2] Xilinx: boot support for Xilinx uart 16550.   David Gibson
• [PATCH 2 of 3] [KVM] Add DCR access information to struct kvm_run   David Gibson
• [PATCH 2/3] [POWERPC][V3] Xilinx: of_serial support for Xilinx uart 16550.   David Gibson
• [PATCH 2 of 3] [KVM] Add DCR access information to struct kvm_run   David Gibson
• [PATCH 2 of 3] [KVM] Add DCR access information to struct kvm_run   David Gibson
• Question on mpc52xx_common.c   David Gibson
• [EFIKA] Really, don't pretend to be CHRP   David Gibson
• [PATCH] 86xx: mark functions static, other minor cleanups   David Gibson
• [PATHC V3] Watchdog on MPC85xx SMP system   Chen Gong
• No subject   Chen Gong
• [PATCH] Watchdog on MPC85xx SMP system   Chen Gong
• [PATCH 0/5] dynamic detection of gianfar TPIPA   Paul Gortmaker
• [PATCH 1/5] phylib: don't create a phydev for ID-less PHYs.   Paul Gortmaker
• [PATCH 2/5] gianfar: assign mii_bus value in dev->priv   Paul Gortmaker
• [PATCH 3/5] gianfar: limit scope of gfar_local_mdio functions   Paul Gortmaker
• [PATCH 4/5] gianfar: dont hog the mii_bus->priv with just the regs.   Paul Gortmaker
• [PATCH 5/5] gianfar: don't hard code the TBIPA MDIO address   Paul Gortmaker
• [PATCH 0/3] Support for Wind River SBC8641D board   Paul Gortmaker
• [PATCH 1/3] powerpc: Add support for Wind River SBC8641D board   Paul Gortmaker
• [PATCH 2/3] powerpc: Add device tree source for Wind River SBC8641D   Paul Gortmaker
• [PATCH 3/3] powerpc: Add defconfig for Wind River SBC8641D board   Paul Gortmaker
• [PATCH 0/5] dynamic detection of gianfar TPIPA   Paul Gortmaker
• [PATCH v2.6.26] gianfar: Determine TBIPA value dynamically   Paul Gortmaker
• [PATCH] 86xx: mark functions static, other minor cleanups   Paul Gortmaker
• [PATCH] 86xx: mark functions static, other minor cleanups   Paul Gortmaker
• [PATCH] 86xx: mark functions static, other minor cleanups   Paul Gortmaker
• [PATCH v2.6.26 0/2] Dynamic TBIPA for gianfar   Paul Gortmaker
• [PATCH v2.6.26 1/2] phylib: factor out get_phy_id from within get_phy_device   Paul Gortmaker
• [PATCH v2.6.26 2/2] gianfar: Determine TBIPA value dynamically   Paul Gortmaker
• [PATCH] 86xx: mark functions static, other minor cleanups   Paul Gortmaker
• [PATCH 0/3] Support for Wind River SBC8641D board   Paul Gortmaker
• [PATCH 1/3] powerpc: Add support for Wind River SBC8641D board   Paul Gortmaker
• [PATCH 2/3] powerpc: Add device tree source for Wind River SBC8641D   Paul Gortmaker
• [PATCH 3/3] powerpc: Add defconfig for Wind River SBC8641D board   Paul Gortmaker
• [PATCH] 86xx: mark functions static, other minor cleanups   Paul Gortmaker
• [PATCH v2.6.26 0/2] Dynamic TBIPA for gianfar   Paul Gortmaker
• [PATCH v2.6.26 0/2] Dynamic TBIPA for gianfar   Paul Gortmaker
• [PATCH 1/2] 86xx: mark functions static, other minor cleanups   Paul Gortmaker
• [PATCH 2/2] mpc86xx_hpcn: Temporarily accept old dts node identifier.   Paul Gortmaker
• [PATCH] mm: make mem_map allocation continuous v2.   Yasunori Goto
• Using FEC on a MPC5200 with default PHY configuration   Wolfgang Grandegger
• [PATCH RFC] tqm8560.dts: add local bus devices   Wolfgang Grandegger
• [PATCH RFC] tqm8560.dts: add local bus devices   Wolfgang Grandegger
• [PATCH RFC] tqm8560.dts: add local bus devices   Wolfgang Grandegger
• [PATCH 6/6] [POWERPC] booting-without-of: add FHCI USB, FSL MCU, FSL UPM and GPIO LEDs bindings   Wolfgang Grandegger
• [PATCH 6/6] [POWERPC] booting-without-of: add FHCI USB, FSL MCU, FSL UPM and GPIO LEDs bindings   Wolfgang Grandegger
• [PATCH] FCC: fix confused base / offset   Sascha Hauer
• [PATCH] FCC: fix confused base / offset   Sascha Hauer
• [PATCH] FCC: fix confused base / offset   Sascha Hauer
• [PATCH] FCC: fix confused base / offset   Sascha Hauer
• mpc5200: add interrupt type function   Sascha Hauer
• [PATCH] [POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 format   Sascha Hauer
• mpc5200b custom board upstreamable?   Sascha Hauer
• [PATCH] add gpiolib support for mpc5200   Sascha Hauer
• mpc5200b custom board upstreamable?   Sascha Hauer
• mpc5200b custom board upstreamable?   Sascha Hauer
• [PATCH] add gpiolib support for mpc5200   Sascha Hauer
• [PATCH] add gpiolib support for mpc5200   Sascha Hauer
• [PATCH] add gpiolib support for mpc5200   Sascha Hauer
• [PATCH] add Phytec pcm030 board support   Sascha Hauer
• [PATCH] add gpiolib support for mpc5200   Sascha Hauer
• [PATCH] RTAS - adapt procfs interface   Christoph Hellwig
• [Cbe-oss-dev] [PATCH] RTAS - adapt procfs interface   Christoph Hellwig
• [PATCH 5/6] [POWERPC] properly declare onstack completion in iseries veth   Christoph Hellwig
• [PATCH 5/6] [POWERPC] properly declare onstack completion in iseries veth   Christoph Hellwig
• Add compat handler for PTRACE_GETSIGINFO   Christoph Hellwig
• new warnings from stacktrace patch   Christoph Hellwig
• [PATCH] powerpc copy_siginfo_from_user32   Christoph Hellwig
• [RFC][WIP][PATCH] Add IRQSTACKS to ppc32   Christoph Hellwig
• [PATCH] Add fast little-endian switch system call   Christoph Hellwig
• [PATCH] Add fast little-endian switch system call   Christoph Hellwig
• [PATCH] mpc83xx SPI glitch   Mike Hench
• [PATCH 6/13] devres: implement managed iomap interface   Tejun Heo
• [PATCH 6/13] devres: implement managed iomap interface   Tejun Heo
• [PATCH 6/13] devres: implement managed iomap interface   Tejun Heo
• [PATCH] devres: support addresses greater than an unsigned long via dev_ioremap   Tejun Heo
• RFC: MPC5200 PSC AC97 driver   Olaf Hering
• missing current-speed property prevents autoconsole on pegasos   Olaf Hering
• [PATCH v5] create modalias file in sysfs for bus of_platform   Olaf Hering
• missing current-speed property prevents autoconsole on pegasos   Olaf Hering
• [PATCH] [POWERPC] Fix iSeries hard irq enabling regression   Benjamin Herrenschmidt
• [PATCH 0/4] [POWERPC] lockdep support for ppc64   Benjamin Herrenschmidt
• [PATCH 1/4] [POWERPC] Initialize paca->current earlier   Benjamin Herrenschmidt
• [PATCH 2/4] [POWERPC] lockdep stacktrace support   Benjamin Herrenschmidt
• [PATCH 3/4] [POWERPC] Fixup softirq preempt count   Benjamin Herrenschmidt
• [PATCH 4/4] [POWERPC] irqtrace support to 64-bit powerpc   Benjamin Herrenschmidt
• [PATCH 2/11] cell: generalize io-workarounds code   Benjamin Herrenschmidt
• [PATCH 0/4] [POWERPC] lockdep support for ppc64   Benjamin Herrenschmidt
• printk time confusion?   Benjamin Herrenschmidt
• [PATCH] ibm_newemac: Add support for 460EX/GT-type MAL rx-channel handling   Benjamin Herrenschmidt
• [PATCH] ibm_newemac: Add support for 460EX/GT-type MAL rx-channel handling   Benjamin Herrenschmidt
• [RFC][PATCH] initial port of fixmap over from x86 for ppc32   Benjamin Herrenschmidt
• [PATCH] PowerPC: MPIC ack interrupts at mpic_teardown_this_cpu()   Benjamin Herrenschmidt
• [PATCH 2/11] cell: generalize io-workarounds code   Benjamin Herrenschmidt
• [PATCH/RFC] via-pmu: remove mdelays from suspend/resume code   Benjamin Herrenschmidt
• [PATCH v2] powerpc: Add irqtrace support for 32-bit powerpc   Benjamin Herrenschmidt
• [RFC/PATCH] powerpc: Add irqtrace support to 32-bit powerpc   Benjamin Herrenschmidt
• [PATCH 1/5] [v2][POWERPC] refactor dcr code   Benjamin Herrenschmidt
• [PATCH v2] powerpc: Add irqtrace support for 32-bit powerpc   Benjamin Herrenschmidt
• [PATCH v2] powerpc: Add irqtrace support for 32-bit powerpc   Benjamin Herrenschmidt
• [RFC][PATCH] initial port of fixmap over from x86 for ppc32   Benjamin Herrenschmidt
• [PATCH v2] powerpc: Add irqtrace support for 32-bit powerpc   Benjamin Herrenschmidt
• [PATCH 1/1 resend][PPC] replace logical by bitand in pci_process_ISA_OF_ranges(), arch/powerpc/kernel/isa-bridge.c   Benjamin Herrenschmidt
• [RFC][PATCH] initial port of fixmap over from x86 for ppc32   Benjamin Herrenschmidt
• [PATCH] ata: Fix pata SIL680 build on arch/ppc   Benjamin Herrenschmidt
• ppc440 caches - change proposal [RFC]   Benjamin Herrenschmidt
• [PATCH] [POWERPC] Make pci_bus_to_host()'s struct pci_bus * argument const   Benjamin Herrenschmidt
• [PATCH 1/6] [POWERPC] Initialize paca->current earlier   Benjamin Herrenschmidt
• [PATCH 2/6] [POWERPC] lockdep stacktrace support   Benjamin Herrenschmidt
• [PATCH 3/6] [POWERPC] Fixup softirq preempt count   Benjamin Herrenschmidt
• [PATCH 4/6] [POWERPC] irqtrace support to 64-bit powerpc   Benjamin Herrenschmidt
• [PATCH 5/6] [POWERPC] properly declare onstack completion in iseries veth   Benjamin Herrenschmidt
• [PATCH 6/6] [POWERPC] Fix device-tree locking vs. interrupts   Benjamin Herrenschmidt
• [PATCH 5/6] [POWERPC] properly declare onstack completion in iseries veth   Benjamin Herrenschmidt
• [PATCH 2/6] [POWERPC] lockdep stacktrace support   Benjamin Herrenschmidt
• [PATCH 1/2] Add thread_info_cache_init() to all archs   Benjamin Herrenschmidt
• [PATCH 2/2] [POWERPC] Fix kernel stack allocation alignment   Benjamin Herrenschmidt
• [PATCH] [POWERPC] 4xx: Add endpoint support to 4xx PCIe driver   Benjamin Herrenschmidt
• [PATCH] [POWERPC] 4xx: Add endpoint support to 4xx PCIe driver   Benjamin Herrenschmidt
• [PATCH 5/6] [POWERPC] properly declare onstack completion in iseries veth   Benjamin Herrenschmidt
• [PATCH] [POWERPC] 4xx: Add endpoint support to 4xx PCIe driver   Benjamin Herrenschmidt
• [PATCH 1/2] Add thread_info_cache_init() to all archs   Benjamin Herrenschmidt
• [PATCH] [POWERPC] 4xx: Add endpoint support to 4xx PCIe driver   Benjamin Herrenschmidt
• [PATCH 1/2] Add thread_info_cache_init() to all archs   Benjamin Herrenschmidt
• [PATCH 2/2] [POWERPC] Fix kernel stack allocation alignment   Benjamin Herrenschmidt
• [PATCH 1/2] Add thread_info_cache_init() to all archs   Benjamin Herrenschmidt
• Get new_emac driver running on 405EP   Benjamin Herrenschmidt
• Patches added to powerpc.git powerpc-next and master branches   Benjamin Herrenschmidt
• [PATCH 2/11] cell: generalize io-workarounds code   Benjamin Herrenschmidt
• Phy read timeout in ibm_new_emac driver   Benjamin Herrenschmidt
• More patches pushed to powerpc.git master and powerpc-next branches   Benjamin Herrenschmidt
• Please pull 'for-2.6.26' branch of 4xx tree   Benjamin Herrenschmidt
• linux-next: 4xx build failure   Benjamin Herrenschmidt
• Please pull 'for-2.6.26' branch of 4xx tree   Benjamin Herrenschmidt
• [PATCH 2/11] cell: generalize io-workarounds code   Benjamin Herrenschmidt
• [PATCH 1/3] [POWERPC] Move stackframe definitions to common header   Benjamin Herrenschmidt
• [PATCH 2/3] [POWERPC] lockdep stacktrace support   Benjamin Herrenschmidt
• [PATCH 3/3] [POWERPC] irqtrace support to 64-bit powerpc   Benjamin Herrenschmidt
• [PATCH 1/2] Add thread_info_cache_init() to all archs   Benjamin Herrenschmidt
• [RFC/PATCH 1/4] Move xics_setup_8259_cascade() into platforms/pseries/setup.c   Benjamin Herrenschmidt
• [RFC/PATCH 2/4] Turn xics_setup_8259_cascade() into a generic pseries_setup_i8259_cascade()   Benjamin Herrenschmidt
• [RFC/PATCH 3/4] Use pseries_setup_i8259_cascade() in pseries_mpic_init_IRQ()   Benjamin Herrenschmidt
• [RFC/PATCH 4/4] Simplify xics direct/lpar irq_host setup   Benjamin Herrenschmidt
• [PATCH 1/2] Add thread_info_cache_init() to all archs   Benjamin Herrenschmidt
• [PATCH 1/3] Add thread_info_cache_init() weak hook   Benjamin Herrenschmidt
• [PATCH 2/3] [POWERPC] Fix kernel stack allocation alignment   Benjamin Herrenschmidt
• [PATCH 3/3] Use __weak macro for smp_setup_processor_id   Benjamin Herrenschmidt
• [PATCH 2/3] [POWERPC] Fix kernel stack allocation alignment   Benjamin Herrenschmidt
• [PATCH 3/3] Use __weak macro for smp_setup_processor_id   Benjamin Herrenschmidt
• [PATCH 02/11] Add udbg_console_anytime() which sets udbg console to CON_ANYTIME   Benjamin Herrenschmidt
• [EFIKA] Really, don't pretend to be CHRP   Benjamin Herrenschmidt
• pci issue - wrong detection of pci ressources   Benjamin Herrenschmidt
• pci issue - wrong detection of pci ressources   Benjamin Herrenschmidt
• [EFIKA] Really, don't pretend to be CHRP   Benjamin Herrenschmidt
• [PATCH 1/2] [v3][POWERPC] refactor dcr code   Benjamin Herrenschmidt
• pci issue - wrong detection of pci ressources   Benjamin Herrenschmidt
• [PATCH 2.6.26?] Raise the upper limit of NR_CPUS.   Benjamin Herrenschmidt
• [PATCH 2.6.26?] Raise the upper limit of NR_CPUS.   Benjamin Herrenschmidt
• pci issue - wrong detection of pci ressources   Benjamin Herrenschmidt
• [PATCH v2] [POWERPC] 4xx: Add endpoint support to 4xx PCIe driver   Benjamin Herrenschmidt
• [PATCH] [POWERPC] ppc32: Fix errata for 603 CPUs   Benjamin Herrenschmidt
• [PATCH] [POWERPC] ppc32: Fix errata for 603 CPUs   Benjamin Herrenschmidt
• [PATCH] [POWERPC] ppc32: Fix errata for 603 CPUs   Benjamin Herrenschmidt
• [PATCH] [POWERPC] AMCC Kilauea (405EX): Disable EMAC loopback mode   Benjamin Herrenschmidt
• [PATCH 1/6] ibm_newemac: Fix problem with jumbo frame support and EMAC V4.patch   Benjamin Herrenschmidt
• [PATCH 2/6] ibm_newemac: Add support for 460EX/GT-type MAL rx-channel handling   Benjamin Herrenschmidt
• [PATCH 3/6] ibm_newemac: Fix section mismatch warnings   Benjamin Herrenschmidt
• [PATCH 4/6] ibm_newemac Use status property for unused/unwired EMACs   Benjamin Herrenschmidt
• [PATCH 5/6] ibm_newemac: PowerPC 440GX EMAC PHY clock workaround   Benjamin Herrenschmidt
• [PATCH 6/6] ibm_newemac: PowerPC 440EP/440GR EMAC PHY clock workaround   Benjamin Herrenschmidt
• [PATCH 1/3] radeonfb: Fix 64 bits resources on 32 bits archs   Benjamin Herrenschmidt
• [PATCH 2/3] aty128fb: Fix 64 bits resources on 32 bits archs   Benjamin Herrenschmidt
• [PATCH 3/3] atyfb: Fix 64 bits resources on 32 bits archs   Benjamin Herrenschmidt
• Patches added to powerpc.git master and powerpc-next branches   Benjamin Herrenschmidt
• pci issue - wrong detection of pci ressources   Benjamin Herrenschmidt
• [PATCH 3/3] atyfb: Fix 64 bits resources on 32 bits archs   Benjamin Herrenschmidt
• [PATCH 1/3] radeonfb: Fix 64 bits resources on 32 bits archs   Benjamin Herrenschmidt
• [PATCH v3] powerpc: Add irqtrace support for 32-bit powerpc   Benjamin Herrenschmidt
• [PATCH] ibm_newemac: Increase MDIO timeouts   Benjamin Herrenschmidt
• Phy read timeout in ibm_new_emac driver   Benjamin Herrenschmidt
• [Linux-fbdev-devel] [PATCH 1/3] radeonfb: Fix 64 bits resources on 32 bits archs   Benjamin Herrenschmidt
• [Linux-fbdev-devel] [PATCH 1/3] radeonfb: Fix 64 bits resources on 32 bits archs   Benjamin Herrenschmidt
• [PATCH 2/2 v2] mpic_u3msi: mpic_u3msi: failed allocation unnoticed   Benjamin Herrenschmidt
• new warnings from stacktrace patch   Benjamin Herrenschmidt
• Patches added to powerpc.git master and powerpc-next branches   Benjamin Herrenschmidt
• [PATCH 2/11] cell: generalize io-workarounds code   Benjamin Herrenschmidt
• [PATCH] Discourage people from fiddling with kernel data from prom_init   Benjamin Herrenschmidt
• [RFC][WIP][PATCH] Add IRQSTACKS to ppc32   Benjamin Herrenschmidt
• [PATCH 1/9] cell: generalize io-workarounds code   Benjamin Herrenschmidt
• [PATCH 2/9] celleb: consolidate io-workarounds code   Benjamin Herrenschmidt
• [PATCH 9/9] celleb: add support for PCI Express   Benjamin Herrenschmidt
• [RFC][WIP][PATCH] Add IRQSTACKS to ppc32   Benjamin Herrenschmidt
• mpc5200b custom board upstreamable?   Benjamin Herrenschmidt
• [PATCH] Change the default link address for pSeries zImage kernels.   Benjamin Herrenschmidt
• [PATCH v2] [POWERPC] 4xx: Add endpoint support to 4xx PCIe driver   Benjamin Herrenschmidt
• [PATCH v2] [POWERPC] 4xx: Add endpoint support to 4xx PCIe driver   Benjamin Herrenschmidt
• [RFC][WIP][PATCH] Add IRQSTACKS to ppc32   Benjamin Herrenschmidt
• [PATCH] ibm_newemac: Increase MDIO timeouts   Benjamin Herrenschmidt
• [PATCH] ibm_newemac: Increase MDIO timeouts   Benjamin Herrenschmidt
• Enabling 64 bit data type for dma_addr_t on non PPC64 architecture   Benjamin Herrenschmidt
• sysfs cpu entry   Benjamin Herrenschmidt
• [PATCH] windfarm: add PowerMac 12,1 support   Benjamin Herrenschmidt
• [RFC] [PATCH] vmemmap fixes to use smaller pages   Benjamin Herrenschmidt
• [PATCH] [POWERPC] convert transfer_to_handler into a macro   Benjamin Herrenschmidt
• [PATCH] x86: fix find_next_bit breakage on ppc and powerpc   Alexander van Heukelum
• linux-next: x86-latest/powerpc-next merge conflict   Alexander van Heukelum
• linux-next: x86-latest/powerpc-next merge conflict   Alexander van Heukelum
• linux-next: x86-latest/powerpc-next merge conflict   Alexander van Heukelum
• linux-next: x86-latest/powerpc-next merge conflict   Alexander van Heukelum
• [PATCH] scc_pata.c: do setup itself instead of ide_setup_pci_device ()   Akira Iguchi
• [PATCH] Fix the wrong serial1 interrupt for 8610 board   Jason Jin
• [PATCH 1/3] MSI driver for Freescale 83xx/85xx/86xx cpu   Jason Jin
• [PATCH 3/3] Enable MSI support for 85xxds board.   Jason Jin
• [PATCH v2] MSI driver for Freescale 83xx/85xx/86xx cpu   Jason Jin
• [PATCH] PowerPC: MPIC ack interrupts at mpic_teardown_this_cpu()   Olof Johansson
• Please pull linux-2.6-mpc52xx.git   Olof Johansson
• [PATCH] PowerPC: MPIC ack interrupts at mpic_teardown_this_cpu()   Olof Johansson
• [PATCH] [POWERPC] pasemi: Minor cleanups of iommu code   Olof Johansson
• [PATCH] PowerPC: MPIC ack interrupts at mpic_teardown_this_cpu()   Olof Johansson
• [PATCH] PowerPC: MPIC ack interrupts at mpic_teardown_this_cpu()   Olof Johansson
• Please pull 'for-2.6.26' branch of pasemi.git   Olof Johansson
• [PATCH] [POWERPC] Remove unused __max_memory variable   Olof Johansson
• [PATCH] pseries: phyp dump: Variable size reserve space.   Olof Johansson
• [PATCH] pseries: phyp dump: Variable size reserve space.   Olof Johansson
• [PATCH] pseries: phyp dump: Variable size reserve space.   Olof Johansson
• [PATCH] fsl_soc : add support for m41t81 rtc chip   Olof Johansson
• [PATCH] [v5] Add idle wait support for 44x platforms   Olof Johansson
• [PATCH 04/11] Convert from DBG() to pr_debug() in platforms/pseries/setup.c   Olof Johansson
• [PATCH] [POWERPC] Add struct iommu_table argument to iommu_map_sg()   Olof Johansson
• [Cbe-oss-dev] [PATCH] Reworked Cell OProfile: SPU mutex lock fix   Maynard Johnson
• 2.6.25-git12 sysfs panic   Greg KH
• [PATCH] devres: support addresses greater than an unsigned long via dev_ioremap   Greg KH
• [GIT PULL] Please pull spufs master branch   Jeremy Kerr
• [GIT PULL] Please pull spufs master branch   Jeremy Kerr
• [PATCH] [POWERPC] spufs: add .gitignore for spu_save_dump.h & spu_restore_dump.h   Jeremy Kerr
• [PATCH] [POWERPC] spufs: add .gitignore for spu_save_dump.h & spu_restore_dump.h   Jeremy Kerr
• [GIT PULL] Please pull spufs master branch   Jeremy Kerr
• [PATCH] Add fast little-endian switch system call   Michael Kerrisk
• [PATCH 0 of 4] [v3] KVM for PowerPC 440   Avi Kivity
• [PATCH 4 of 4] [KVM POWERPC] PowerPC 440 KVM implementation   Avi Kivity
• [PATCH 4 of 4] [KVM POWERPC] PowerPC 440 KVM implementation   Avi Kivity
• [PATCH] [POWERPC KVM] Kconfig fixes   Avi Kivity
• [PATCH] ehea: Fix DLPAR memory add support   Thomas Klein
• [PATCH 2/8] powerpc: replace `__attribute' by `__attribute__'   Roel Kluin
• [PATCH 1/1 resend][PPC] replace logical by bitand in pci_process_ISA_OF_ranges(), arch/powerpc/kernel/isa-bridge.c   Roel Kluin
• [PATCH] powerpc: mpic_pasemi_msi: failed allocation unnoticed   Roel Kluin
• [PATCH 2/2] powerpc: mpic_pasemi_msi: failed allocation unnoticed   Roel Kluin
• [PATCH 2/2] mpic_u3msi: mpic_u3msi: failed allocation unnoticed   Roel Kluin
• [PATCH] spi_mpc83xx: test below 0 on unsigned irq in mpc83xx_spi_probe()   Roel Kluin
• [PATCH 1/2] spi_mpc83xx: test below 0 on unsigned irq in mpc83xx_spi_probe()   Roel Kluin
• [PATCH 2/2 v2] mpic_u3msi: mpic_u3msi: failed allocation unnoticed   Roel Kluin
• [PATCH 1/2 v2] powerpc: mpic_pasemi_msi: failed allocation unnoticed   Roel Kluin
• [PATCH 2/2 v2] mpic_u3msi: mpic_u3msi: failed allocation unnoticed   Roel Kluin
• [PATCH 4/5] LED driver   Peter Korsgaard
• [PATCH 4/5] LED driver   Peter Korsgaard
• [patch v11 0/4] Cypress c67x00 (EZ-Host/EZ-OTG) support   Peter Korsgaard
• [patch v11 1/4] USB: add Cypress c67x00 low level interface code   Peter Korsgaard
• [patch v11 2/4] USB: add Cypress c67x00 OTG controller core driver   Peter Korsgaard
• [patch v11 3/4] USB: add Cypress c67x00 OTG controller HCD driver   Peter Korsgaard
• [patch v11 4/4] USB: add Cypress c67x00 OTG controller gadget driver   Peter Korsgaard
• [PATCH 2/11] cell: generalize io-workarounds code   Ishizaki Kou
• [PATCH 2/11] cell: generalize io-workarounds code   Ishizaki Kou
• [PATCH 2/11] cell: generalize io-workarounds code   Ishizaki Kou
• Patches added to powerpc.git powerpc-next and master branches   Ishizaki Kou
• [PATCH 2/11] cell: generalize io-workarounds code   Ishizaki Kou
• [PATCH 2/11] cell: generalize io-workarounds code   Ishizaki Kou
• [PATCH 1/9] cell: generalize io-workarounds code   Ishizaki Kou
• [PATCH 2/9] celleb: consolidate io-workarounds code   Ishizaki Kou
• [PATCH 3/9] celleb: move the base part for celleb support   Ishizaki Kou
• [PATCH 4/9] celleb: move the SCC related code for celleb   Ishizaki Kou
• [PATCH 5/9] celleb: move files for Beat hvcall interfaces   Ishizaki Kou
• [PATCH 6/9] celleb: move files for Beat mmu and iommu   Ishizaki Kou
• [PATCH 7/9] celleb: move a file for SPU on Beat   Ishizaki Kou
• [PATCH 9/9] celleb: add support for PCI Express   Ishizaki Kou
• 2.6.25: pmac_newworld undefined   Christian Kujau
• filenames with spaces in /sys?   Christian Kujau
• [PATCH] Re: filenames with spaces in /sys?   Christian Kujau
• filenames with spaces in /sys?   Christian Kujau
• RFC: adding post build comments to kernels   Leisner, Martin
• [patch] PS3: Fix gelic net module dependency   Geoff Levand
• [PATCH 1/7] Implement arch disable/enable irq hooks.   Guennadi Liakhovetski
• [RFC, PATCH 0/7] Power management patches from Scott Wood plus MPC8241 Linkstation   Guennadi Liakhovetski
• [PATCH 1/7] pm: Add TLF_SLEEPING hack to delay interrupt delivery when waking from sleep.   Guennadi Liakhovetski
• [PATCH 2/7] Add 6xx-style HID0_SLEEP support.   Guennadi Liakhovetski
• [PATCH 3/7] mpc83xx: Power Management support   Guennadi Liakhovetski
• [PATCH 4/7] mpc83xx: timer driver for PM wakeup   Guennadi Liakhovetski
• [PATCH 5/7] gianfar: Add flags for magic packet and MDIO.   Guennadi Liakhovetski
• [PATCH 6/7] gianfar: Magic Packet and suspend/resume support.   Guennadi Liakhovetski
• [PATCH 7/7] linkstation: implement standby   Guennadi Liakhovetski
• MPC83xx Power Management support   Guennadi Liakhovetski
• [PATCH 1/7] Implement arch disable/enable irq hooks.   Guennadi Liakhovetski
• Using FEC on a MPC5200 with default PHY configuration   Grant Likely
• [PATCHv2] powerpc: Describe memory-mapped RAM&ROM chips OF bindings   Grant Likely
• Commits added to powerpc.git master/powerpc-next branches   Grant Likely
• Please pull powerpc.git merge branch   Grant Likely
• [PATCH 1/3][POWERPC][V2] of_serial: Fix possible null dereference.   Grant Likely
• [PATCH 3/3][POWERPC][V2] Xilinx: boot support for Xilinx uart 16550.   Grant Likely
• [PATCH 2/3][POWERPC][V2] Xilinx: of_serial support for Xilinx uart 16550.   Grant Likely
• [PATCH 2/3][POWERPC][V2] Xilinx: of_serial support for Xilinx uart 16550.   Grant Likely
• [PATCH 3/3][POWERPC][V2] Xilinx: boot support for Xilinx uart 16550.   Grant Likely
• [PATCH 2/3] [POWERPC][V3] Xilinx: of_serial support for Xilinx uart 16550.   Grant Likely
• [PATCH 3/3][POWERPC][V2] Xilinx: boot support for Xilinx uart 16550.   Grant Likely
• Question on mpc52xx_common.c   Grant Likely
• Please pull linux-2.6-mpc52xx.git   Grant Likely
• Please pull linux-2.6-mpc52xx.git   Grant Likely
• Please pull linux-2.6-mpc52xx.git   Grant Likely
• [PATCH] PowerPC 44x: use machine_device_initcall() instead of device_initcall() for warp_nand   Grant Likely
• Question on mpc52xx_common.c   Grant Likely
• Booting a Xilinx board   Grant Likely
• Question on mpc52xx_common.c   Grant Likely
• Question on mpc52xx_common.c   Grant Likely
• Booting a Xilinx board   Grant Likely
• ppc440 caches - change proposal [RFC]   Grant Likely
• [PATCH] [POWERPC] 83xx/85xx: Reorganize defconfigs   Grant Likely
• ppc440 caches - change proposal [RFC]   Grant Likely
• [PATCH] [POWERPC] 83xx/85xx: Reorganize defconfigs   Grant Likely
• How to pass information from the bootloader to the kernel ?   Grant Likely
• State of the MPC5200 PSC AC97 driver   Grant Likely
• [PATCH 1/5] phylib: don't create a phydev for ID-less PHYs.   Grant Likely
• zImage.embedded   Grant Likely
• [PATCH 2/2] [POWERPC] Implement support for the GPIO LIB API   Grant Likely
• [PATCH 1/2] OF helpers for the GPIO API   Grant Likely
• zImage.embedded   Grant Likely
• Warp patches for 2.6.26   Grant Likely
• [EFIKA] Really, don't pretend to be CHRP   Grant Likely
• [PATCH 2/2] [POWERPC] UCC nodes cleanup   Grant Likely
• mpc5200: add interrupt type function   Grant Likely
• [PATCH] [POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 format   Grant Likely
• [RFC/POWERPC] mpc5200: remove "mpc5200b-*" from compatible lists in dts files   Grant Likely
• RFC: MPC5200 PSC AC97 driver   Grant Likely
• [PATCH 1/2] [v3][POWERPC] refactor dcr code   Grant Likely
• [PATCH 2/2] [POWERPC] Xilinx: Virtex: Enable dcr for MMIO and NATIVE   Grant Likely
• [PATCH] [POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 format   Grant Likely
• RFC: MPC5200 PSC AC97 driver   Grant Likely
• RFC: MPC5200 PSC AC97 driver   Grant Likely
• [RFC/POWERPC] mpc5200: remove "mpc5200b-*" from compatible lists in dts files   Grant Likely
• removal of arch/ppc in 2.6.27?   Grant Likely
• [PATCH] [PPC] Remove mpc8272 ads board from arch/ppc   Grant Likely
• [RFC fs_enet: Convert MII bitbang driver to use GPIO lib   Grant Likely
• UartLite   Grant Likely
• [PATCH] [POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 format   Grant Likely
• [PATCH 1/5] [POWERPC] sysdev: implement FSL GTM support   Grant Likely
• [PATCH 3/5] [POWERPC] QE: prepare QE PIO code for GPIO LIB support   Grant Likely
• [PATCH 4/5] [POWERPC] QE: implement support for the GPIO LIB API   Grant Likely
• [PATCH] [POWERPC] 52xx: defconfigs for CM5200, Lite5200B, Motion-PRO and TQM5200   Grant Likely
• [PATCH2/2] [POWERPC] CPM1: implement GPIO LIB API on CPM1 Freescale SoC.   Grant Likely
• [PATCH 4/5] [POWERPC] QE: implement support for the GPIO LIB API   Grant Likely
• [PATCH] [POWERPC] 52xx: defconfigs for CM5200, Lite5200B, Motion-PRO and TQM5200   Grant Likely
• [PATCH 5/5] [POWERPC] 83xx: new board support: MPC8360E-RDK   Grant Likely
• [PATCH 4/5] [POWERPC] QE: implement support for the GPIO LIB API   Grant Likely
• [PATCH] [PPC] Remove mpc8272 ads board from arch/ppc   Grant Likely
• [PATCH 1/5] [POWERPC] sysdev: implement FSL GTM support   Grant Likely
• [RFC POWERPC] booting-without-of: bindings for FHCI USB, GPIO LEDs, MCU, and NAND on UPM   Grant Likely
• [RFC POWERPC] booting-without-of: bindings for FHCI USB, GPIO LEDs, MCU, and NAND on UPM   Grant Likely
• [RFC POWERPC] booting-without-of: bindings for FHCI USB, GPIO LEDs, MCU, and NAND on UPM   Grant Likely
• Xilinx GPIO driver / CONFIG_OF   Grant Likely
• mpc5200b custom board upstreamable?   Grant Likely
• mpc5200b custom board upstreamable?   Grant Likely
• [PATCH] [POWERPC] bootwrapper: fix build error on virtex405-head.S   Grant Likely
• [PATCH] add gpiolib support for mpc5200   Grant Likely
• [PATCH] add gpiolib support for mpc5200   Grant Likely
• [PATCH] add gpiolib support for mpc5200   Grant Likely
• [PATCH 2/2] [PPC] Add strncmp to arch/ppc   Grant Likely
• [RESEND][PATCH][POWERPC] PIKA Warp: Update platform code to supportRev B boards   Grant Likely
• [RESEND][PATCH][POWERPC] PIKA Warp: Update platform code to supportRev B boards   Grant Likely
• [RESEND][PATCH][POWERPC] PIKA Warp: Update platform code to supportRev B boards   Grant Likely
• [RESEND][PATCH][POWERPC] PIKA Warp: Update platform code to supportRev B boards   Grant Likely
• [RESEND][PATCH][POWERPC] PIKA Warp: Update platform code to supportRev B boards   Grant Likely
• [RESEND][PATCH 2/2][POWERPC] PIKA Warp: Update platform code to supportRev B boards   Grant Likely
• build failure on efika   Grant Likely
• [PATCH] [POWERPC] mpc5200: Fix unterminated of_device_id table   Grant Likely
• Please pull linux-2.6-mpc52xx.git   Grant Likely
• [patch v11 1/4] USB: add Cypress c67x00 low level interface code   Grant Likely
• [patch v11 2/4] USB: add Cypress c67x00 OTG controller core driver   Grant Likely
• [patch v11 3/4] USB: add Cypress c67x00 OTG controller HCD driver   Grant Likely
• [PATCH] [POWERPC] mpc5200: Allow for fixed speed MII configurations   Grant Likely
• [PATCH] [POWERPC] mpc5200: Allow for fixed speed MII configurations   Grant Likely
• [PATCH] [POWERPC] mpc5200: Allow for fixed speed MII configurations   Grant Likely
• [PATCH 0/3] [POWERPC] [V2][RFC] of_serial and boot patches introduction   John Linn
• [PATCH 1/3][POWERPC][V2] of_serial: Fix possible null dereference.   John Linn
• [PATCH 3/3][POWERPC][V2] Xilinx: boot support for Xilinx uart 16550.   John Linn
• [PATCH 2/3][POWERPC][V2] Xilinx: of_serial support for Xilinx uart 16550.   John Linn
• [PATCH 2/3][POWERPC][V2] Xilinx: of_serial support for Xilinx uart 16550.   John Linn
• [PATCH 2/3] [POWERPC][V3] Xilinx: of_serial support for Xilinx uart 16550.   John Linn
• [PATCH 3/3][POWERPC][V2] Xilinx: boot support for Xilinx uart 16550.   John Linn
• [PATCH 2/3] [POWERPC][V3] Xilinx: of_serial support for Xilinx uart 16550.   John Linn
• Booting a Xilinx board   John Linn
• Xilinx GPIO driver / CONFIG_OF   John Linn
• [PATCH] Fix a potential issue in mpc52xx uart driver   Andrew Liu
• [PATCH] devres: support addresses greater than an unsigned long via dev_ioremap   Jon Loeliger
• [Cbe-oss-dev] [PATCH] Cell OProfile: SPU mutex lock fix   Carl Love
• [Cbe-oss-dev] [PATCH] Cell OProfile: SPU mutex lock fix   Carl Love
• [Cbe-oss-dev] [PATCH] Cell OProfile: SPU mutex lock fix   Carl Love
• [Cbe-oss-dev] [PATCH] Reworked Cell OProfile: SPU mutex lock fix   Carl Love
• [BUG] 2.6.25-rc8-mm1 kernel panic while bootup on powerpc   Yinghai Lu
• [BUG] 2.6.25-rc8-mm1 kernel panic while bootup on powerpc   Yinghai Lu
• [PATCH] mm: allocate usemap at first instead of mem_map in sparse_init   Yinghai Lu
• [PATCH] mm: allocate usemap at first instead of mem_map in sparse_init   Yinghai Lu
• [PATCH] mm: allocate usemap at first instead of mem_map in sparse_init   Yinghai Lu
• [PATCH] mm: make mem_map allocation continuous v2.   Yinghai Lu
• [PATCH] mm: allocate usemap at first instead of mem_map in sparse_init   Yinghai Lu
• [PATCH] mm: make mem_map allocation continuous v2.   Yinghai Lu
• Question on mpc52xx_common.c   Sven Luther
• State of the MPC5200 PSC AC97 driver   Sven Luther
• [PATCH] RTAS - adapt procfs interface   Nathan Lynch
• [PATCH] RTAS - adapt procfs interface   Nathan Lynch
• [PATCH] RTAS - adapt procfs interface   Nathan Lynch
• [PATCH 1/1 resend][PPC] replace logical by bitand in pci_process_ISA_OF_ranges(), arch/powerpc/kernel/isa-bridge.c   Nathan Lynch
• [PATCH] PowerPC 44x: use machine_device_initcall() instead ofdevice_initcall() for warp_nand   Sean MacLennan
• Warp patches for 2.6.26   Sean MacLennan
• [PATCH 1/5] Boot code   Sean MacLennan
• PATCH 2/5] Platform code   Sean MacLennan
• [PATCH 3/5] Defconfig   Sean MacLennan
• [PATCH 4/5] LED driver   Sean MacLennan
• [PATCH 5/5] WDT driver   Sean MacLennan
• Warp patches for 2.6.26   Sean MacLennan
• [PATCH 1/5] Boot code   Sean MacLennan
• Warp patches for 2.6.26   Sean MacLennan
• PATCH 2/5] Platform code   Sean MacLennan
• [PATCH 4/5] LED driver   Sean MacLennan
• [PATCH 4/5] LED driver   Sean MacLennan
• [PATCH 5/5] WDT driver   Sean MacLennan
• Warp patches for 2.6.26   Sean MacLennan
• Warp patches for 2.6.26   Sean MacLennan
• [PATCH 4/5] LED driver   Sean MacLennan
• [RESEND][PATCH][POWERPC] PIKA Warp: Update platform code to support Rev B boards   Sean MacLennan
• [RESEND][PATCH][POWERPC] PIKA Warp: Update platform code to supportRev B boards   Sean MacLennan
• [RESEND][PATCH][POWERPC] PIKA Warp: Update platform code to supportRev B boards   Sean MacLennan
• [RESEND][PATCH][POWERPC] PIKA Warp: Update platform code to supportRev B boards   Sean MacLennan
• [RESEND][PATCH][POWERPC] PIKA Warp: Update platform code to supportRev B boards   Sean MacLennan
• [RESEND][PATCH][POWERPC] PIKA Warp: Update platform code to supportRev B boards   Sean MacLennan
• [RESEND][PATCH][POWERPC] PIKA Warp: Update platform code to supportRev B boards   Sean MacLennan
• [RESEND][PATCH][POWERPC] PIKA Warp: Update platform code tosupportRev B boards   Sean MacLennan
• [RESEND][PATCH][POWERPC] PIKA Warp: Update platform code to supportRev B boards   Sean MacLennan
• [RESEND][PATCH][POWERPC] PIKA Warp: Update platform code to supportRev B boards   Sean MacLennan
• [RESEND][PATCH 1/2][POWERPC] PIKA Warp: Update platform code to supportRev B boards   Sean MacLennan
• [RESEND][PATCH 2/2][POWERPC] PIKA Warp: Update platform code to supportRev B boards   Sean MacLennan
• [RESEND][PATCH 2/2][POWERPC] PIKA Warp: Update platform code to supportRev B boards   Sean MacLennan
• [RESEND][PATCH 1/2][POWERPC] PIKA Warp: Update platform code to supportRev B boards   Sean MacLennan
• [RESEND][PATCH 1/2][POWERPC] PIKA Warp: Update platform code tosupportRev B boards   Sean MacLennan
• MV64x60 device bus   Remi Machet
• [PATCH] sysdev,mv64x60: initialization of mv64x60 ethernet, serial and I2C   Remi Machet
• [PATCH] sysdev,mv64x60: initialization of mv64x60 ethernet, serial and I2C   Remi Machet
• [PATCH 1/2 v2] sysdev,mv64x60: I2C defaults   Remi Machet
• [PATCH 2/2 v2] sysdev,mv64x60: initialization of mv64x60 ethernet, serial and I2C   Remi Machet
• [PATCH 2/2 v3] sysdev,mv64x60: initialization of mv64x60 ethernet, serial and I2C   Remi Machet
• [PATCH] sysdev,mv64x60: early console fix   Remi Machet
• [PATCH] sysdev,mv64x60: MV64x60 device bus   Remi Machet
• [PATCH] sysdev,mv64x60: MV64x60 device bus   Remi Machet
• [PATCH v2] sysdev,mv64x60: MV64x60 device bus   Remi Machet
• [PATCH v3] sysdev,mv64x60: MV64x60 device bus   Remi Machet
• [PATCH] [POWERPC] Move phys_addr_t definition into asm/types.h   Paul Mackerras
• [PATCH] Add idle power save for ppc 4xx   Paul Mackerras
• [patch 06/24] lmb: add lmb_alloc_nid()   Paul Mackerras
• [PATCH 01/11] [POWERPC] bootwrapper: Allow specifying of image physical offset   Paul Mackerras
• [PATCH 04/11 v2] [POWERPC] Remove and replace uses of PPC_MEMSTART with memstart_addr   Paul Mackerras
• Commits added to powerpc.git master/powerpc-next branches   Paul Mackerras
• [PATCH 2/8] powerpc: replace `__attribute' by `__attribute__'   Paul Mackerras
• Please pull powerpc.git merge branch   Paul Mackerras
• [PATCH 01/11] [POWERPC] bootwrapper: Allow specifying of image physical offset   Paul Mackerras
• Please pull from 'for-2.6.25' branch   Paul Mackerras
• [PATCH] RTAS - adapt procfs interface   Paul Mackerras
• [PATCH 01/11] [POWERPC] bootwrapper: Allow specifying of image physical offset   Paul Mackerras
• Please pull powerpc.git merge branch   Paul Mackerras
• [RFC][PATCH] initial port of fixmap over from x86 for ppc32   Paul Mackerras
• [PATCH] powerpc - Use KBUILD_CFLAGS and similar   Paul Mackerras
• Patches added to powerpc.git powerpc-next and master branches   Paul Mackerras
• [PATCH] [POWERPC] Update linker script to properly set physical addresses   Paul Mackerras
• Patches added to powerpc.git powerpc-next and master branches   Paul Mackerras
• [BUG] 2.6.25-rc2-git4 - Regression Kernel oops while running kernbench and tbench on powerpc   Paul Mackerras
• [BUG] 2.6.25-rc2-git4 - Regression Kernel oops while running kernbench and tbench on powerpc   Paul Mackerras
• [BUG] 2.6.25-rc2-git4 - Regression Kernel oops while running kernbench and tbench on powerpc   Paul Mackerras
• 4xx defconfig reorg   Paul Mackerras
• [PATCH] pseries: phyp dump: Variable size reserve space.   Paul Mackerras
• [PATCH 01/11] [POWERPC] bootwrapper: Allow specifying of image physical offset   Paul Mackerras
• Status of patches (ppc32 mm init clean and 85xx kernel reloc)   Paul Mackerras
• Patches added to powerpc.git powerpc-next and master branches   Paul Mackerras
• [PATCH 2/8] [POWERPC] fsl_lbc: implement few routines to manage FSL UPMs   Paul Mackerras
• [LMB][1/2] Fix some whitespace and other formatting issues, use pr_debug   Paul Mackerras
• [LMB][2/2] Restructure allocation loops to avoid unsigned underflow   Paul Mackerras
• Warp patches for 2.6.26   Paul Mackerras
• [LMB][1/2] Fix some whitespace and other formatting issues, use pr_debug   Paul Mackerras
• [BUG] 2.6.25-rc2-git4 - Regression Kernel oops while running kernbench and tbench on powerpc   Paul Mackerras
• [PATCH] [POWERPC] Make Book-E debug handling SMP safe   Paul Mackerras
• [PATCH] pseries: phyp dump: Variable size reserve space.   Paul Mackerras
• [PATCH 03/12] [POWERPC] Remove and replace uses of PPC_MEMSTART with memstart_addr   Paul Mackerras
• [PATCH 09/12] [POWERPC] Move phys_addr_t definition into asm/types.h   Paul Mackerras
• [PATCH 12/12] [POWERPC] 85xx: Add support for relocatble kernel (and booting at non-zero)   Paul Mackerras
• Patches added to powerpc.git powerpc-next and master branches   Paul Mackerras
• Patches pushed to powerpc.git master and powerpc-next branches   Paul Mackerras
• [PATCH 12/12] [POWERPC] 85xx: Add support for relocatble kernel (and booting at non-zero)   Paul Mackerras
• [PATCH v2.6.26 0/2] Dynamic TBIPA for gianfar   Paul Mackerras
• More patches pushed to powerpc.git master and powerpc-next branches   Paul Mackerras
• More patches pushed to powerpc.git master and powerpc-next branches   Paul Mackerras
• More patches pushed to powerpc.git master and powerpc-next branches (second try)   Paul Mackerras
• [POWERPC] Optimize fls64() on 64-bit processors   Paul Mackerras
• 2.6.25-mm1 on the g5   Paul Mackerras
• build breakage from of i2c helper patch   Paul Mackerras
• Patches added to powerpc.git master and powerpc-next branches   Paul Mackerras
• [PATCH] [POWERPC] i2c: fix build breakage introduced by OF helpers   Paul Mackerras
• [PATCH] [POWERPC] i2c: fix build breakage introduced by OF helpers   Paul Mackerras
• [PATCH] [POWERPC] i2c: fix build breakage introduced by OF helpers   Paul Mackerras
• Patches added to powerpc.git master and powerpc-next branches   Paul Mackerras
• Please pull powerpc.git master branch   Paul Mackerras
• removal of arch/ppc in 2.6.27?   Paul Mackerras
• linux-next: x86-latest/powerpc-next merge conflict   Paul Mackerras
• linux-next: x86-latest/powerpc-next merge conflict   Paul Mackerras
• Patches added to powerpc.git master and powerpc-next branches   Paul Mackerras
• [RFC patch 6/9] POWERPC remove -traditional   Paul Mackerras
• [PATCH] powerpc TLF_RESTORE_SIGMASK   Paul Mackerras
• [BUG] 2.6.25-rc2-git4 - Regression Kernel oops while running kernbench and tbench on powerpc   Paul Mackerras
• [PATCH] powerpc TLF_RESTORE_SIGMASK   Paul Mackerras
• [PATCH] powerpc TLF_RESTORE_SIGMASK   Paul Mackerras
• LMB regression...   Paul Mackerras
• Patches pushed to powerpc.git master and powerpc-next branches   Paul Mackerras
• [git pull] Please pull powerpc.git master branch   Paul Mackerras
• [RFC][WIP][PATCH] Add IRQSTACKS to ppc32   Paul Mackerras
• [PATCH] Add fast little-endian switch system call   Paul Mackerras
• [POWERPC] Use __always_inline for xchg* and cmpxchg*   Paul Mackerras
• [PATCH] [POWERPC] Add IRQSTACKS support on ppc32   Paul Mackerras
• [PATCH] [POWERPC] Add IRQSTACKS support on ppc32   Paul Mackerras
• [PATCH] Add fast little-endian switch system call   Paul Mackerras
• [PATCH 1/7] Implement arch disable/enable irq hooks.   Paul Mackerras
• [PATCH 1/7] Implement arch disable/enable irq hooks.   Paul Mackerras
• [RESEND][PATCH 1/2][POWERPC] PIKA Warp: Update platform code to supportRev B boards   Paul Mackerras
• build failure on efika   Paul Mackerras
• [git pull] Please pull powerpc.git master branch   Paul Mackerras
• [PATCH] Add fast little-endian switch system call   Paul Mackerras
• [PATCH] [POWERPC] convert transfer_to_handler into a macro   Paul Mackerras
• [PATCH] [POWERPC] convert transfer_to_handler into a macro   Paul Mackerras
• [PATCH v3] sysdev,mv64x60: MV64x60 device bus   Paul Mackerras
• [git pull] Please pull powerpc.git master branch   Paul Mackerras
• USB on MPC8641D   John Marc
• USB on MPC8641D   John Marc
• USB on MPC8641D   John Marc
• removal of arch/ppc in 2.6.27?   Marvin
• removal of arch/ppc in 2.6.27?   Marvin
• [PATCH] powerpc TLF_RESTORE_SIGMASK   Roland McGrath
• [PATCH] powerpc TLF_RESTORE_SIGMASK   Roland McGrath
• [PATCH] powerpc copy_siginfo_from_user32   Roland McGrath
• [PATCH] ptrace: compat_ptrace_request siginfo   Roland McGrath
• [PATCH] powerpc TLF_RESTORE_SIGMASK   Roland McGrath
• [PATCH] powerpc TLF_RESTORE_SIGMASK   Roland McGrath
• [PATCH 1/2] Add thread_info_cache_init() to all archs   Kyle McMartin
• [PATCH 2/2] kallsyms: move get_func_addr to <asm/processor.h>   Kyle McMartin
• removal of arch/ppc in 2.6.27?   Chuck Meade
• [PATCH] [POWERPC] Fix a mm compile error   Emil Medve
• [patch 06/24] lmb: add lmb_alloc_nid()   David Miller
• Patches added to powerpc.git powerpc-next and master branches   David Miller
• patches for 2.6.26   David Miller
• [PATCH 0/5] dynamic detection of gianfar TPIPA   David Miller
• [PATCH3/7] i2c: OF helpers for the i2c API   David Miller
• [PATCHv2 3/7] i2c: OF helpers for the i2c API   David Miller
• [PATCH] tg3: fix MMIO for PPC 44x platforms   David Miller
• [LMB][2/2] Restructure allocation loops to avoid unsigned underflow   David Miller
• [PATCH] [POWERPC] i2c: fix build breakage introduced by OF helpers   David Miller
• [PATCH] [POWERPC] i2c: fix build breakage introduced by OF helpers   David Miller
• [PATCH] [POWERPC] i2c: fix build breakage introduced by OF helpers   David Miller
• [Linux-fbdev-devel] [PATCH 1/3] radeonfb: Fix 64 bits resources on 32 bits archs   David Miller
• LMB regression...   David Miller
• LMB regression...   David Miller
• LMB regression...   David Miller
• cpu_clock confusion   David Miller
• get_cycles()   David Miller
• get_cycles()   David Miller
• Xilinx network trouble   Rick Moleres
• Xilinx network trouble (mostly solved)   Rick Moleres
• cpu_clock confusion (was: printk time confusion?)   Ingo Molnar
• linux-next: x86-latest/powerpc-next merge conflict   Ingo Molnar
• [PATCH 2/2 v5] Add DIU platform code for MPC8610HPCD   Andrew Morton
• [BUG] 2.6.25-rc8-mm1 kernel panic while bootup on powerpc   Andrew Morton
• [PATCH] mm: allocate usemap at first instead of mem_map in sparse_init   Andrew Morton
• [PATCH] mm: make mem_map allocation continuous v2.   Andrew Morton
• [PATCH] powerpc TLF_RESTORE_SIGMASK   Andrew Morton
• [PATCH] powerpc TLF_RESTORE_SIGMASK   Andrew Morton
• [PATCH 1/2] Driver for Freescale 8610 and 5121 DIU   Andrew Morton
• [PATCH 1/2] Add thread_info_cache_init() to all archs   Andrew Morton
• [PATCH 1/2] Add thread_info_cache_init() to all archs   Andrew Morton
• [PATCH 1/2] Driver for Freescale 8610 and 5121 DIU   Andrew Morton
• [PATCH 1/2] Add thread_info_cache_init() to all archs   Andrew Morton
• 2.6.25-mm1 on the g5   Andrew Morton
• [PATCH 2/3] [POWERPC] Fix kernel stack allocation alignment   Andrew Morton
• [PATCH 3/3] Use __weak macro for smp_setup_processor_id   Andrew Morton
• [PATCH 3/3] Use __weak macro for smp_setup_processor_id   Andrew Morton
• Rameshmrm sent you a friend request on Tagged :)   Rameshmrm Mrm
• State of the MPC5200 PSC AC97 driver   Sylvain Munaut
• BestComm/FEC Linux system crash   Sylvain Munaut
• [PATCH] mpc8540 : Fix restart   Philippe De Muyter
• [PATCH] fsl_soc : add support for m41t81 rtc chip   Philippe De Muyter
• [PATCH] fsl_soc : add support for m41t81 rtc chip   Philippe De Muyter
• [PATCH] mpc8540 : Fix restart   Philippe De Muyter
• [PATCH] [POWERPC] Add struct iommu_table argument to iommu_map_sg()   Mark Nelson
• [PATCH] [POWERPC] Add struct iommu_table argument to iommu_map_sg()   Mark Nelson
• [PATCH 1/5] [v2][POWERPC] refactor dcr code   Stephen Neuendorffer
• [PATCH 2/3][POWERPC][V2] Xilinx: of_serial support for Xilinx uart 16550.   Stephen Neuendorffer
• [PATCH 2/3] [POWERPC][V3] Xilinx: of_serial support for Xilinxuart 16550.   Stephen Neuendorffer
• [PATCH 1/5] [v2][POWERPC] refactor dcr code   Stephen Neuendorffer
• Booting a Xilinx board   Stephen Neuendorffer
• [PATCH 1/5] [v2][POWERPC] refactor dcr code   Stephen Neuendorffer
• [PATCH 1/2] [v3][POWERPC] refactor dcr code   Stephen Neuendorffer
• [PATCH 2/2] [POWERPC] Xilinx: Virtex: Enable dcr for MMIO and NATIVE   Stephen Neuendorffer
• [PATCH 1/2] [v3][POWERPC] refactor dcr code   Stephen Neuendorffer
• Xilinx network trouble (mostly solved)   Stephen Neuendorffer
• IB/ehca: handle negative return value from ibmebus_request_irq() properly in ehca_create_eq()   Hoang-Nam Nguyen
• MPC5200b problem configuring PSC6 as a serial port   Nick
• [PATCH] RTAS - adapt procfs interface   Jens Osterkamp
• [PATCH] RTAS - adapt procfs interface   Jens Osterkamp
• [PATCH] RTAS - adapt procfs interface   Jens Osterkamp
• [PATCH] Freescale QUICC Engine USB Host Controller   Pandita, Vikram
• cross tool netbsd 3.0 target   Joel Parker
• interrupt latency spi   Gabriel Paubert
• removal of arch/ppc in 2.6.27?   Gabriel Paubert
• linux-next: x86-latest/powerpc-next merge conflict   Gabriel Paubert
• [PATCH] [POWERPC] ppc32: Fix errata for 603 CPUs   Gabriel Paubert
• cpu_clock confusion   Gabriel Paubert
• [PATCHv2] powerpc: Describe memory-mapped RAM&ROM chips OF bindings   Trent Piepho
• [PATCH] [POWERPC] Make pci_bus_to_host()'s struct pci_bus * argument const   Trent Piepho
• [PATCHv3 0/4] cpm2: Reset the CPM at startup and fix the cpm_uart driver accordingly.   Laurent Pinchart
• [PATCHv3 1/4] cpm_uart: Allocate DPRAM memory for SMC ports on CPM2-based platforms.   Laurent Pinchart
• [PATCHv3 2/4] cpm-serial: Relocate CPM buffer descriptors and SMC parameter ram.   Laurent Pinchart
• [PATCHv3 3/4] ep8248e: Reference SMC parameter RAM base in the device tree.   Laurent Pinchart
• [PATCHv3 4/4] cpm2: Reset the CPM when early debugging is not enabled.   Laurent Pinchart
• [PATCHv2] powerpc: Describe memory-mapped RAM&ROM chips OF bindings   Laurent Pinchart
• [PATCHv2] powerpc: Describe memory-mapped RAM&ROM chips OF bindings   Laurent Pinchart
• [PATCHv3 2/4] cpm-serial: Relocate CPM buffer descriptors and SMC parameter ram.   Laurent Pinchart
• [PATCHv4 0/5] cpm2: Reset the CPM at startup and fix the cpm_uart driver accordingly.   Laurent Pinchart
• [PATCHv4 1/5] cpm_uart: Allocate DPRAM memory for SMC ports on CPM2-based platforms.   Laurent Pinchart
• [PATCHv4 2/5] powerpc: Add bootwrapper function to get virtual reg from the device tree.   Laurent Pinchart
• [PATCHv4 3/5] cpm-serial: Relocate CPM buffer descriptors and SMC parameter ram.   Laurent Pinchart
• [PATCHv4 4/5] ep8248e: Reference SMC parameter RAM base in the device tree.   Laurent Pinchart
• [PATCHv4 5/5] cpm2: Reset the CPM when early debugging is not enabled.   Laurent Pinchart
• [PATCHv2] powerpc: Describe memory-mapped RAM&ROM chips OF bindings   Laurent Pinchart
• [PATCH] powerpc: Fix CPM2 SCC1 clock initialization.   Laurent Pinchart
• [PATCHv2] powerpc: Describe memory-mapped RAM&ROM chips OF bindings   Laurent Pinchart
• [PATCH 2/4] [POWERPC] Implement support for the GPIO LIB API   Laurent Pinchart
• [PATCH] [POWERPC] CPM1: implement GPIO LIB API   Laurent Pinchart
• [PATCH] Freescale QUICC Engine USB Host Controller   Laurent Pinchart
• [PATCH] Freescale QUICC Engine USB Host Controller   Laurent Pinchart
• [PATCH 6/8] [POWERPC] sysdev,qe_lib: implement FSL GTM support   Laurent Pinchart
• [PATCH] Freescale QUICC Engine USB Host Controller   Laurent Pinchart
• [PATCH] Freescale QUICC Engine USB Host Controller   Laurent Pinchart
• [PATCH 19 5/5] Convert pfc8563 i2c driver from old style to new style   Laurent Pinchart
• [PATCH] powerpc: Move opcodes common to CPM1 and CPM2 to include/asm-powerpc/cpm.h   Laurent Pinchart
• Patches added to powerpc.git powerpc-next and master branches   Laurent Pinchart
• Patches added to powerpc.git powerpc-next and master branches   Laurent Pinchart
• Patches added to powerpc.git powerpc-next and master branches   Laurent Pinchart
• patches for 2.6.26   Laurent Pinchart
• How to pass information from the bootloader to the kernel ?   Laurent Pinchart
• [PATCH] fs_enet: Don't call NAPI functions when NAPI is not used.   Laurent Pinchart
• Flash on LocalBus @ MPC8343   Laurent Pinchart
• [PATCH 5/5] WDT driver   Laurent Pinchart
• [RFC] GPIO-based flow control in the cpm_uart driver   Laurent Pinchart
• [RFC] Using two baud rate generators with the cpm_uart driver   Laurent Pinchart
• [RFC] GPIO-based flow control in the cpm_uart driver   Laurent Pinchart
• [RFC] Using two baud rate generators with the cpm_uart driver   Laurent Pinchart
• [RFC] Using two baud rate generators with the cpm_uart driver   Laurent Pinchart
• [PATCH] powerpc: Modem control lines support for the cpm_uart driver   Laurent Pinchart
• [RFC fs_enet: Convert MII bitbang driver to use GPIO lib   Laurent Pinchart
• [RFC fs_enet: Convert MII bitbang driver to use GPIO lib   Laurent Pinchart
• [PATCH] powerpc: Implement GPIO LIB API on CPM2 Freescale SoC.   Laurent Pinchart
• [PATCH] powerpc: Implement GPIO LIB API on CPM2 Freescale SoC.   Laurent Pinchart
• [PATCH] powerpc: Implement GPIO LIB API on CPM2 Freescale SoC.   Laurent Pinchart
• [PATCH 6/8] [POWERPC] sysdev,qe_lib: implement FSL GTM support   Laurent Pinchart
• [PATCH] rtc-pcf8563: Add device ids table   Laurent Pinchart
• [RFC fs_enet: Convert MII bitbang driver to use GPIO lib   Laurent Pinchart
• [PATCH] rtc-pcf8563: Add device ids table   Laurent Pinchart
• [RFC fs_enet: Convert MII bitbang driver to use GPIO lib   Laurent Pinchart
• [PATCH] rtc-pcf8563: Add device ids table   Laurent Pinchart
• [RFC fs_enet: Convert MII bitbang driver to use GPIO lib   Laurent Pinchart
• [RFC fs_enet: Convert MII bitbang driver to use GPIO lib   Laurent Pinchart
• [RFC POWERPC] booting-without-of: bindings for FHCI USB, GPIO LEDs, MCU, and NAND on UPM   Laurent Pinchart
• [PATCH] rtc-pcf8563: Add device ids table   Laurent Pinchart
• [PATCH] rtc-pcf8563: Add device ids table   Laurent Pinchart
• [PATCH 1/2] [MTD] Add support for RAM & ROM mappings in the physmap_of MTD driver.   Laurent Pinchart
• [PATCH] [POWERPC] Port fixmap from x86 and use for kmap_atomic   Gerhard Pircher
• FW: SKB corruption on heavy traffic   Gerhard Pircher
• [BUG] 2.6.25-rc8-mm1 kernel panic while bootup on powerpc   Badari Pulavarty
• [BUG] 2.6.25-rc8-mm1 kernel panic while bootup on powerpc   Badari Pulavarty
• [PATCH] mm: allocate usemap at first instead of mem_map in sparse_init   Badari Pulavarty
• 2.6.25-git12 sysfs panic   Badari Pulavarty
• [RESEND][PATCH][POWERPC] PIKA Warp: Update platform code to supportRev B boards   Richard Purdie
• [RESEND][PATCH][POWERPC] PIKA Warp: Update platform code tosupportRev B boards   Richard Purdie
• [PATCH 2/8] powerpc: replace `__attribute' by `__attribute__'   Sam Ravnborg
• 2.6.25: pmac_newworld undefined   Sam Ravnborg
• [PATCH] make help: Show defconfig subdirs   Sam Ravnborg
• 2.6.25: pmac_newworld undefined   Sam Ravnborg
• [PATCH] [POWERPC] 4xx: Fix PESDRn_UTLSET1 register setup on 460EX/GT   Stefan Roese
• [PATCH] [POWERPC] 4xx: Add endpoint support to 4xx PCIe driver   Stefan Roese
• [PATCH] [POWERPC] 4xx: Add endpoint support to 4xx PCIe driver   Stefan Roese
• [PATCH] [POWERPC] 4xx: Create common ppc4xx_reset_system() in ppc4xx_soc.c   Stefan Roese
• [PATCH] ibm_newemac: Add support for 460EX/GT-type MAL rx-channel handling   Stefan Roese
• [PATCH] ibm_newemac: Add support for 460EX/GT-type MAL rx-channel handling   Stefan Roese
• [PATCH] [POWERPC] 4xx: Some EMAC related changes in Canyonlands & Glacier dts files   Stefan Roese
• [PATCH] ibm_newemac: Fix problem with jumbo frame support and EMAC V4   Stefan Roese
• [PATCH] [POWERPC] 4xx: Change dts files to support jumbo frames   Stefan Roese
• [PATCH] [POWERPC] 4xx: Add endpoint support to 4xx PCIe driver   Stefan Roese
• ppc405ep emac driver loading problem   Stefan Roese
• [PATCH] [POWERPC] 4xx: Add endpoint support to 4xx PCIe driver   Stefan Roese
• [PATCH] [POWERPC] 4xx: Add endpoint support to 4xx PCIe driver   Stefan Roese
• [PATCH 1/5] phylib: don't create a phydev for ID-less PHYs.   Stefan Roese
• [PATCH] PowerPC 44x: Add NOR flash entry to Canyonlands DTS.   Stefan Roese
• [PATCH] PowerPC 44x: Add NOR flash entry to Canyonlands DTS.   Stefan Roese
• [PATCH] [POWERPC] 4xx: Add NOR FLASH entries to Canyonlands and Glacier dts   Stefan Roese
• [PATCH] [POWERPC] 4xx: Fix 460GT support to not enable FPU   Stefan Roese
• [PATCH] rtc-pcf8563: Add device ids table   Stefan Roese
• [PATCH v2] [POWERPC] 4xx: Add endpoint support to 4xx PCIe driver   Stefan Roese
• [PATCH] [POWERPC] AMCC Kilauea (405EX): Disable EMAC loopback mode   Stefan Roese
• [PATCH v2] [POWERPC] 4xx: Add endpoint support to 4xx PCIe driver   Stefan Roese
• [PATCH] rtc-pcf8563: Add device ids table   Stefan Roese
• [PATCH] IB/ehca: extend query_device() and query_port() to support all values for ibv_devinfo   Stefan Roscher
• [PATCH] IB/ehca: Allocate event queue size depending on max number of CQs and QPs   Stefan Roscher
• [REPOST][PATCH] IB/ehca: Allocate event queue size depending on max number of CQs and QPs   Stefan Roscher
• [PATCH] Make #include <sysdev/foo.h> work for 64-bit powerpc   Stephen Rothwell
• [PATCH 2/4] [POWERPC] lockdep stacktrace support   Stephen Rothwell
• [PATCH 1/4] [POWERPC] Initialize paca->current earlier   Stephen Rothwell
• [PATCH 5/6] [POWERPC] properly declare onstack completion in iseries veth   Stephen Rothwell
• [PATCH] [POWERPC] 83xx/85xx: Reorganize defconfigs   Stephen Rothwell
• [PATCH] [POWERPC] 83xx/85xx: Reorganize defconfigs   Stephen Rothwell
• [PATCH 1/3] [POWERPC] iSeries: boot on a fake paca   Stephen Rothwell
• [PATCH 2/3] [POWERPC] iSeries: make iseries_reg_save private to iSeries   Stephen Rothwell
• [PATCH 3/3] [POWERPC] iSeries: localise and constify some iSeries data   Stephen Rothwell
• [PATCH] [POWERPC] 83xx/85xx: Reorganize defconfigs   Stephen Rothwell
• [PATCH 1/3] powerpc: Add support for Wind River SBC8641D board   Stephen Rothwell
• [PATCH] [POWERPC] Fix MAX_ORDER config problem   Stephen Rothwell
• ppc64 build issue   Stephen Rothwell
• [PATCHv2 3/7] i2c: OF helpers for the i2c API   Stephen Rothwell
• Warp patches for 2.6.26   Stephen Rothwell
• [PATCH] [POWERPC] remove include of asm/of_device.h from pmi.h   Stephen Rothwell
• [PATCH] [POWERPC] remove include of asm/of_device.h from pmi.h   Stephen Rothwell
• [PATCH] [POWEPC] replace asm/of_device.h with linux/of_device.h in macio.h   Stephen Rothwell
• linux-next: 4xx build failure   Stephen Rothwell
• More patches pushed to powerpc.git master and powerpc-next branches   Stephen Rothwell
• linux-next: kvm/powerpc merge conflict   Stephen Rothwell
• linux-next: x86-latest/powerpc-next merge conflict   Stephen Rothwell
• [PATCH 1/3] Raise the upper limit of NR_CPUS.   Stephen Rothwell
• [PATCH 2/3] Make iSeries spin on __secondary_hold_spinloop, like pSeries.   Stephen Rothwell
• new warnings from stacktrace patch   Stephen Rothwell
• [PATCH] add gpiolib support for mpc5200   Stephen Rothwell
• [RESEND][PATCH][POWERPC] PIKA Warp: Update platform code to supportRev B boards   Stephen Rothwell
• [PATCH] sysdev,mv64x60: MV64x60 device bus   Stephen Rothwell
• [PATCH] [POWERPC] Add struct iommu_table argument to iommu_map_sg()   Stephen Rothwell
• [Buildroot] zImage.embedded   Ulf Samuelsson
• [i2c] [PATCH 0/2] i2c: Add support for device alias names   Wolfram Sang
• [PATCH] pseries: phyp dump: Variable size reserve space.   Joel Schopp
• printk time confusion?   Andreas Schwab
• printk time confusion?   Andreas Schwab
• Add compat handler for PTRACE_GETSIGINFO   Andreas Schwab
• Oops MPC8343 @ 2.6.25-rc7   Andre Schwarz
• MPC8343 - "unable to handle paging request @ 0"   Andre Schwarz
• [Fwd: Re: MPC8343 - "unable to handle paging request @ 0"]   Andre Schwarz
• MPC8343 - "unable to handle paging request @ 0"   Andre Schwarz
• MPC8343 - "unable to handle paging request @ 0"   Andre Schwarz
• MPC8343 - "unable to handle paging request @ 0"   Andre Schwarz
• MPC8343 - "unable to handle paging request @ 0"   Andre Schwarz
• Flash on LocalBus @ MPC8343   Andre Schwarz
• Flash on LocalBus @ MPC8343   Andre Schwarz
• USB @ MPC8343   Andre Schwarz
• Question on MPC83xx interrupts   Andre Schwarz
• Question on MPC83xx interrupts   Andre Schwarz
• Question on MPC83xx interrupts   Andre Schwarz
• EXT_IRQ0 @ MPC834x   Andre Schwarz
• MPC8343 - "unable to handle paging request @ 0"   André Schwarz
• MPC8343 - "unable to handle paging request @ 0"   André Schwarz
• Flash on LocalBus @ MPC8343   André Schwarz
• Flash on LocalBus @ MPC8343   André Schwarz
• Question on MPC83xx interrupts   André Schwarz
• EXT_IRQ0 @ MPC834x   André Schwarz
• Question on mpc52xx_common.c   Robert Schwebel
• Question on mpc52xx_common.c   Robert Schwebel
• State of the MPC5200 PSC AC97 driver   Robert Schwebel
• State of the MPC5200 PSC AC97 driver   Robert Schwebel
• fec_mpc5200: reset FEC on error   Robert Schwebel
• mpc5200: add interrupt type function   Robert Schwebel
• fec_mpc5200: reset FEC on error   Robert Schwebel
• fec_mpc5200: reset FEC on error   Robert Schwebel
• mpc5200: add interrupt type function   Robert Schwebel
• [PATCH] [POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 format   Robert Schwebel
• Question on mpc52xx_common.c   Matt Sealey
• Question on mpc52xx_common.c   Matt Sealey
• State of the MPC5200 PSC AC97 driver   Matt Sealey
• [EFIKA] Really, don't pretend to be CHRP   Matt Sealey
• RFC: MPC5200 PSC AC97 driver   Matt Sealey
• RFC: MPC5200 PSC AC97 driver   Matt Sealey
• RFC: MPC5200 PSC AC97 driver   Matt Sealey
• RFC: MPC5200 PSC AC97 driver   Matt Sealey
• [EFIKA] Really, don't pretend to be CHRP   Matt Sealey
• RFC: MPC5200 PSC AC97 driver   Matt Sealey
• [EFIKA] Really, don't pretend to be CHRP   Matt Sealey
• [EFIKA] Really, don't pretend to be CHRP   Matt Sealey
• RFC: MPC5200 PSC AC97 driver   Matt Sealey
• RFC: MPC5200 PSC AC97 driver   Matt Sealey
• [PATCH] [POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 format   Matt Sealey
• RFC: MPC5200 PSC AC97 driver   Matt Sealey
• missing current-speed property prevents autoconsole on pegasos   Matt Sealey
• [PATCH] add gpiolib support for mpc5200   Matt Sealey
• [PATCHv2] powerpc: Describe memory-mapped RAM&ROM chips OF bindings   Sergei Shtylyov
• [PATCHv2] powerpc: Describe memory-mapped RAM&ROM chips OF bindings   Sergei Shtylyov
• [PATCH 2/3][POWERPC][V2] Xilinx: of_serial support for Xilinx uart 16550.   Sergei Shtylyov
• [PATCH 2/3][POWERPC][V2] Xilinx: of_serial support for Xilinx uart 16550.   Sergei Shtylyov
• [PATCH 2/3] [POWERPC][V3] Xilinx: of_serial support for Xilinx uart 16550.   Sergei Shtylyov
• [PATCH 3/4] PowerPC: Add PCI entry to 440EPx Sequoia DTS.   Sergei Shtylyov
• [PATCH 3/4] PowerPC: Add PCI entry to 440EPx Sequoia DTS.   Sergei Shtylyov
• [PATCH 6/13] devres: implement managed iomap interface   Sergei Shtylyov
• [PATCH] siimage: fix kernel oops on PPC 44x   Sergei Shtylyov
• [PATCH] ide: make ide_pci_check_iomem() actually work   Sergei Shtylyov
• [PATCH] siimage: fix kernel oops on PPC 44x   Sergei Shtylyov
• [PATCH 6/13] devres: implement managed iomap interface   Sergei Shtylyov
• [PATCH] natsemi: fix for PPC 44x platforms   Sergei Shtylyov
• [PATCH] tg3: fix for PPC 44x platforms   Sergei Shtylyov
• [PATCH 6/13] devres: implement managed iomap interface   Sergei Shtylyov
• [PATCH 6/13] devres: implement managed iomap interface   Sergei Shtylyov
• [PATCH] natsemi: fix MMIO for PPC 44x platforms   Sergei Shtylyov
• [PATCH] tg3: fix MMIO for PPC 44x platforms   Sergei Shtylyov
• RFC: MPC5200 PSC AC97 driver   Sergei Shtylyov
• pci issue - wrong detection of pci ressources   Sergei Shtylyov
• [PATCH 1/2] aic7xxx: fix MMIO for PPC 44x platforms   Sergei Shtylyov
• [PATCH 2/2] aic79xx: fix MMIO for PPC 44x platforms   Sergei Shtylyov
• pci issue - wrong detection of pci ressources   Sergei Shtylyov
• pci issue - wrong detection of pci ressources   Sergei Shtylyov
• pci issue - wrong detection of pci ressources   Sergei Shtylyov
• pci issue - wrong detection of pci ressources   Sergei Shtylyov
• [PATCH 3/3] atyfb: Fix 64 bits resources on 32 bits archs   Sergei Shtylyov
• [PATCH 1/2] [MTD] Add support for RAM & ROM mappings in the physmap_of MTD driver.   Sergei Shtylyov
• [PATCH 1/2] [MTD] Add support for RAM & ROM mappings in the physmap_of MTD driver.   Sergei Shtylyov
• HR timers on PowerPC 83xx   Sergei Shtylyov
• HR timers on PowerPC 83xx   Sergei Shtylyov
• Please pull linux-2.6-mpc52xx.git   Bartlomiej Sieka
• [RESEND3 PATCH] [POWERPC] mpc5200: Amalgamated DTS fixes and updates   Bartlomiej Sieka
• Please pull powerpc.git merge branch   Bartlomiej Sieka
• Please pull linux-2.6-mpc52xx.git   Bartlomiej Sieka
• Please pull linux-2.6-mpc52xx.git   Bartlomiej Sieka
• [PATCH] [POWERPC] 52xx: defconfigs for CM5200, Lite5200B, Motion-PRO and TQM5200   Bartlomiej Sieka
• [PATCH] [POWERPC] 52xx: defconfigs for CM5200, Lite5200B, Motion-PRO and TQM5200   Bartlomiej Sieka
• [PATCH] [POWERPC] 52xx: defconfigs for CM5200, Lite5200B, Motion-PRO and TQM5200   Bartlomiej Sieka
• [PATCH 1/2] i2c: Add support for device alias names   Kay Sievers
• [PATCH 1/2] i2c: Add support for device alias names   Kay Sievers
• [PATCH / RFC 2/2] ISP1760: bus glue code   Sebastian Siewior
• [PATCH 1/2] Driver for Freescale 8610 and 5121 DIU   Jiri Slaby
• [PATCH 1/2] Driver for Freescale 8610 and 5121 DIU   Jiri Slaby
• [PATCH 1/2] Driver for Freescale 8610 and 5121 DIU   Jiri Slaby
• [PATCH 1/2] Driver for Freescale 8610 and 5121 DIU   Jiri Slaby
• [PATCH 1/2] Driver for Freescale 8610 and 5121 DIU   Jiri Slaby
• [PATCH] rtc-pcf8563: Add device ids table   Jon Smirl
• [PATCH] rtc-pcf8563: Add device ids table   Jon Smirl
• [PATCH 1/2] i2c: Add support for device alias names   Jon Smirl
• [PATCH 1/2 v2] i2c: Add support for device alias names   Jon Smirl
• v5 patch to add FSL DIU framebuffer driver   York Sun
• [PATCH 1/2 v5] Driver for Freescale 8610 and 5121 DIU   York Sun
• [PATCH 2/2 v5] Add DIU platform code for MPC8610HPCD   York Sun
• [PATCH 2/2 v5] Add DIU platform code for MPC8610HPCD   York Sun
• [PATCH 001/003] snd-powermac: enable headphone detection   Risto Suominen
• [PATCH 002/003] snd-powermac: AWACS and Screamer mixers for PM7500, Beige, and iMac SL   Risto Suominen
• [PATCH 003/003] snd-powermac: Burgundy mixers for B&W and iMac   Risto Suominen
• Commits added to powerpc.git master/powerpc-next branches   Timur Tabi
• [PATCH 2/2 v5] Add DIU platform code for MPC8610HPCD   Timur Tabi
• [PATCH] Freescale QUICC Engine USB Host Controller   Timur Tabi
• Question on mpc52xx_common.c   Timur Tabi
• [PATCH 2/2] [POWERPC] UCC nodes cleanup   Timur Tabi
• [PATCH 2/2] [POWERPC] UCC nodes cleanup   Timur Tabi
• [PATCH 2/2] [POWERPC] UCC nodes cleanup   Timur Tabi
• [PATCH 2/2] [POWERPC] UCC nodes cleanup   Timur Tabi
• [PATCH 2/2] [POWERPC] UCC nodes cleanup   Timur Tabi
• [PATCH 1/2] Driver for Freescale 8610 and 5121 DIU   Timur Tabi
• [PATCH 1/2] Driver for Freescale 8610 and 5121 DIU   Timur Tabi
• [PATCH 1/2] Driver for Freescale 8610 and 5121 DIU   Timur Tabi
• [PATCH 1/2] Driver for Freescale 8610 and 5121 DIU   Timur Tabi
• [PATCH 2/2] [POWERPC] UCC nodes cleanup   Timur Tabi
• [PATCH] Make rheap safe for spinlocks   Timur Tabi
• [PATCH 1/2] Driver for Freescale 8610 and 5121 DIU   Timur Tabi
• [PATCH] Make rheap safe for spinlocks   Timur Tabi
• [PATCH] 86xx: mark functions static, other minor cleanups   Timur Tabi
• [PATCH] 86xx: mark functions static, other minor cleanups   Timur Tabi
• lseek() on entries in /proc/device-tree returns EINVAL   Timur Tabi
• lseek() on entries in /proc/device-tree returns EINVAL   Timur Tabi
• lseek() on entries in /proc/device-tree returns EINVAL   Timur Tabi
• [PATCH v2][POWERPC] qe_lib and ucc_geth: switch to the cpm_muram implementation   Timur Tabi
• [PATCH 2/5] [POWERPC] QE: add support for QE USB clocks routing   Timur Tabi
• [PATCH 2/5] [POWERPC] QE: add support for QE USB clocks routing   Timur Tabi
• [PATCH 2/5] [POWERPC] QE: add support for QE USB clocks routing   Timur Tabi
• [PATCH 2/5] [POWERPC] QE: add support for QE USB clocks routing   Timur Tabi
• [PATCH 2/5] [POWERPC] QE: add support for QE USB clocks routing   Timur Tabi
• [PATCH] Add Timur Tabi to the MAINTAINERS file   Timur Tabi
• [PATCH 2/6] [POWERPC] QE: add support for QE USB clocks routing   Timur Tabi
• [PATCH 3/6] [POWERPC] QE: prepare QE PIO code for GPIO LIB support   Timur Tabi
• [PATCH 4/6] [POWERPC] QE: implement support for the GPIO LIB API   Timur Tabi
• [PATCH 4/6] [POWERPC] QE: implement support for the GPIO LIB API   Timur Tabi
• Two MPC8641D's on a single JTAG chain with BDI2000/3000. Anyone got it to work?   Phil Terry
• [PATCH] mpc83xx SPI glitch   Joakim Tjernlund
• Quick patch for ucc_geth, add copybreak and move TX processing to soft IRQ   Joakim Tjernlund
• Signal backtrace function   Joakim Tjernlund
• [PATCH 1/5] phylib: don't create a phydev for ID-less PHYs.   Joakim Tjernlund
• [PATCH 1/5] phylib: don't create a phydev for ID-less PHYs.   Joakim Tjernlund
• Signal backtrace function   Joakim Tjernlund
• lseek() on entries in /proc/device-tree returns EINVAL   Joakim Tjernlund
• lseek() on entries in /proc/device-tree returns EINVAL   Joakim Tjernlund
• lseek() on entries in /proc/device-tree returns EINVAL   Joakim Tjernlund
• [PATCH 1/2] spi_mpc83xx: test below 0 on unsigned irq in mpc83xx_spi_probe()   Joakim Tjernlund
• [PATCH 1/2] spi_mpc83xx: test below 0 on unsigned irq in mpc83xx_spi_probe()   Joakim Tjernlund
• HR timers on PowerPC 83xx   Joakim Tjernlund
• HR timers on PowerPC 83xx   Joakim Tjernlund
• HR timers on PowerPC 83xx   Joakim Tjernlund
• [PATCH] [POWERPC] mpc5200: Allow for fixed speed MII configurations   Joakim Tjernlund
• [PATCH] [POWERPC] mpc5200: Allow for fixed speed MII configurations   Joakim Tjernlund
• [PATCHv2 2/3] ep8248e: Reference SMC parameter RAM base in thedevice tree.   Rune Torgersen
• [PATCHv2 2/3] ep8248e: Reference SMC parameter RAM base in thedevice tree.   Rune Torgersen
• [PATCH 1/2] [MTD] Add support for RAM & ROMmappings in the physmap_of MTD driver.   Rune Torgersen
• [git pull] Please pull powerpc.git master branch   Linus Torvalds
• Enabling 64 bit data type for dma_addr_t on non PPC64 architecture   Tushar Tyagi
• [PATCH] [POWERPC] Move phys_addr_t definition into asm/types.h   Geert Uytterhoeven
• Memory corruption   Geert Uytterhoeven
• [PATCH] pseries: phyp dump: Variable size reserve space.   Linas Vepstas
• [PATCH] E500 Make steal_context SMP-safe.   Randy Vinson
• [PATCH v2] E500 Make steal_context SMP-safe.   Randy Vinson
• [PATCH v3] E500 Make steal_context SMP-safe.   Randy Vinson
• [PATCH] celleb_scc_pciex __iomem annotations   Al Viro
• [PATCH 2/4] [POWERPC] Implement support for the GPIO LIB API   Anton Vorontsov
• [PATCH] Freescale QUICC Engine USB Host Controller   Anton Vorontsov
• [PATCH 6/8] [POWERPC] sysdev,qe_lib: implement FSL GTM support   Anton Vorontsov
• [PATCH] Freescale QUICC Engine USB Host Controller   Anton Vorontsov
• [PATCH] [POWERPC] mpc8315: fix USB UTMI Host setup   Anton Vorontsov
• patches for 2.6.26   Anton Vorontsov
• [PATCH 0/2] Notorious OF GPIO API support   Anton Vorontsov
• [PATCH 2/2] [POWERPC] Implement support for the GPIO LIB API   Anton Vorontsov
• [PATCH 1/2] OF helpers for the GPIO API   Anton Vorontsov
• [PATCH 2/2] [POWERPC] UCC nodes cleanup   Anton Vorontsov
• [PATCH 2/8] [POWERPC] fsl_lbc: implement few routines to manage FSL UPMs   Anton Vorontsov
• [PATCH 2/8] [POWERPC] fsl_lbc: implement few routines to manage FSL UPMs   Anton Vorontsov
• [PATCH 2/2] [POWERPC] UCC nodes cleanup   Anton Vorontsov
• [PATCH 2/2] [POWERPC] UCC nodes cleanup   Anton Vorontsov
• [PATCH 2/2] [POWERPC] UCC nodes cleanup   Anton Vorontsov
• [PATCH 2/2] [POWERPC] UCC nodes cleanup   Anton Vorontsov
• [PATCH] [POWERPC] mpc8315: fix USB UTMI Host setup   Anton Vorontsov
• [PATCH 0/8] A bit of new code and sparse cleanups along the way   Anton Vorontsov
• [PATCH rebased][POWERPC] qe_lib and ucc_geth: switch to the cpm_muram implementation   Anton Vorontsov
• [RFC] GPIO-based flow control in the cpm_uart driver   Anton Vorontsov
• [RFC] GPIO-based flow control in the cpm_uart driver   Anton Vorontsov
• [PATCH] fsl_soc: Factor fsl_get_sys_freq() out of the wdt and spi inits.   Anton Vorontsov
• [PATCH] fsl_soc: Factor fsl_get_sys_freq() out of the wdt and spi inits.   Anton Vorontsov
• [RFC fs_enet: Convert MII bitbang driver to use GPIO lib   Anton Vorontsov
• [PATCH v2][POWERPC] qe_lib and ucc_geth: switch to the cpm_muram implementation   Anton Vorontsov
• [PATCH 6/8] [POWERPC] sysdev,qe_lib: implement FSL GTM support   Anton Vorontsov
• [PATCH 6/8] [POWERPC] sysdev,qe_lib: implement FSL GTM support   Anton Vorontsov
• [PATCH 6/8] [POWERPC] sysdev,qe_lib: implement FSL GTM support   Anton Vorontsov
• [PATCH 6/8] [POWERPC] sysdev,qe_lib: implement FSL GTM support   Anton Vorontsov
• [PATCH 6/8] [POWERPC] sysdev,qe_lib: implement FSL GTM support   Anton Vorontsov
• [PATCH 6/8] [POWERPC] sysdev,qe_lib: implement FSL GTM support   Anton Vorontsov
• [PATCH 6/8] [POWERPC] sysdev,qe_lib: implement FSL GTM support   Anton Vorontsov
• [PATCH 0/5] Few more patches for Kumar's powerpc.git   Anton Vorontsov
• [PATCH 1/5] [POWERPC] sysdev: implement FSL GTM support   Anton Vorontsov
• [PATCH 2/5] [POWERPC] QE: add support for QE USB clocks routing   Anton Vorontsov
• [PATCH 3/5] [POWERPC] QE: split par_io_config_pin()   Anton Vorontsov
• [PATCH 4/5] [POWERPC] QE: implement support for the GPIO LIB API   Anton Vorontsov
• [PATCH 5/5] [POWERPC] 83xx: new board support: MPC8360E-RDK   Anton Vorontsov
• [PATCH 2/5] [POWERPC] QE: add support for QE USB clocks routing   Anton Vorontsov
• [PATCH 3/5] [POWERPC] QE: split par_io_config_pin()   Anton Vorontsov
• [PATCH 4/5] [POWERPC] QE: implement support for the GPIO LIB API   Anton Vorontsov
• [PATCH 1/5] [POWERPC] sysdev: implement FSL GTM support   Anton Vorontsov
• [PATCH 1/5] [POWERPC] sysdev: implement FSL GTM support   Anton Vorontsov
• [PATCH 0/5 v2] Few more patches for Kumar's powerpc.git   Anton Vorontsov
• [PATCH 1/5] [POWERPC] sysdev: implement FSL GTM support   Anton Vorontsov
• [PATCH 2/5] [POWERPC] QE: add support for QE USB clocks routing   Anton Vorontsov
• [PATCH 3/5] [POWERPC] QE: prepare QE PIO code for GPIO LIB support   Anton Vorontsov
• [PATCH 4/5] [POWERPC] QE: implement support for the GPIO LIB API   Anton Vorontsov
• [PATCH 5/5] [POWERPC] 83xx: new board support: MPC8360E-RDK   Anton Vorontsov
• [PATCH v2.6.26] powerpc: Add 8568 PHY workaround to board code   Anton Vorontsov
• [PATCH 3/5] [POWERPC] QE: prepare QE PIO code for GPIO LIB support   Anton Vorontsov
• [PATCH 1/5] [POWERPC] sysdev: implement FSL GTM support   Anton Vorontsov
• [PATCH 4/5] [POWERPC] QE: implement support for the GPIO LIB API   Anton Vorontsov
• [PATCH 4/5] [POWERPC] QE: implement support for the GPIO LIB API   Anton Vorontsov
• [PATCH 4/5] [POWERPC] QE: implement support for the GPIO LIB API   Anton Vorontsov
• [PATCH 4/5] [POWERPC] QE: implement support for the GPIO LIB API   Anton Vorontsov
• [PATCH 5/5] [POWERPC] 83xx: new board support: MPC8360E-RDK   Anton Vorontsov
• [RFC fs_enet: Convert MII bitbang driver to use GPIO lib   Anton Vorontsov
• [RFC POWERPC] booting-without-of: bindings for FHCI USB, GPIO LEDs, MCU, and NAND on UPM   Anton Vorontsov
• [RFC POWERPC] booting-without-of: bindings for FHCI USB, GPIO LEDs, MCU, and NAND on UPM   Anton Vorontsov
• [RFC POWERPC] booting-without-of: bindings for FHCI USB, GPIO LEDs, MCU, and NAND on UPM   Anton Vorontsov
• [RFC POWERPC] booting-without-of: bindings for FHCI USB, GPIO LEDs, MCU, and NAND on UPM   Anton Vorontsov
• [RFCv2 POWERPC] booting-without-of: bindings for FHCI USB, GPIO LEDs, MCU, and NAND on UPM   Anton Vorontsov
• [PATCH] add gpiolib support for mpc5200   Anton Vorontsov
• [PATCH] add gpiolib support for mpc5200   Anton Vorontsov
• [PATCH 0/6 v3] Few more patches for Kumar's powerpc.git   Anton Vorontsov
• [PATCH 1/6] [POWERPC] sysdev: implement FSL GTM support   Anton Vorontsov
• [PATCH 2/6] [POWERPC] QE: add support for QE USB clocks routing   Anton Vorontsov
• [PATCH 3/6] [POWERPC] QE: prepare QE PIO code for GPIO LIB support   Anton Vorontsov
• [PATCH 4/6] [POWERPC] QE: implement support for the GPIO LIB API   Anton Vorontsov
• [PATCH 5/6] [POWERPC] 83xx: new board support: MPC8360E-RDK   Anton Vorontsov
• [PATCH 6/6] [POWERPC] booting-without-of: add FHCI USB, FSL MCU, FSL UPM and GPIO LEDs bindings   Anton Vorontsov
• [PATCH] of/gpio: use dynamic base allocation   Anton Vorontsov
• [PATCH 1/3] [NET] uli526x: initialize the hardware prior to requesting interrupts   Anton Vorontsov
• [PATCH 2/3] [NET] uli526x: fix endianness issues in the setup frame   Anton Vorontsov
• [PATCH 3/3] [POWERPC] 86xx: mpc8610_hpcd: use ULI526X driver for on-board ethernet   Anton Vorontsov
• [PATCH] [IDE] alim15x3: disable init_hwif_ali15x3 for PowerPC   Anton Vorontsov
• [PATCH] [POWERPC] 86xx: mpc8610_hpcd: add support for PCI Express x8 slot   Anton Vorontsov
• [PATCH 0/6 v4] Few more patches for Kumar's powerpc.git   Anton Vorontsov
• [PATCH 1/6] [POWERPC] sysdev: implement FSL GTM support   Anton Vorontsov
• [PATCH 2/6] [POWERPC] QE: add support for QE USB clocks routing   Anton Vorontsov
• [PATCH 3/6] [POWERPC] QE: prepare QE PIO code for GPIO LIB support   Anton Vorontsov
• [PATCH 4/6] [POWERPC] QE: implement support for the GPIO LIB API   Anton Vorontsov
• [PATCH 5/6] [POWERPC] 83xx: new board support: MPC8360E-RDK   Anton Vorontsov
• [PATCH 6/6] [POWERPC] booting-without-of: add FHCI USB, FSL MCU, FSL UPM and GPIO LEDs bindings   Anton Vorontsov
• [PATCH 2/6] [POWERPC] QE: add support for QE USB clocks routing   Anton Vorontsov
• [PATCH 4/6] [POWERPC] QE: implement support for the GPIO LIB API   Anton Vorontsov
• [PATCH 6/6] [POWERPC] booting-without-of: add FHCI USB, FSL MCU, FSL UPM and GPIO LEDs bindings   Anton Vorontsov
• [PATCH for 2.6.26] Fix the size of qe muram for MPC8568E   Haiying Wang
• Kilauea: kernel hangs when using ARCH=powerpc   Bernhard Weirich
• Kilauea: kernel hangs when using ARCH=powerpc   Bernhard Weirich
• [BUG] 2.6.25-rc8-mm1 kernel panic while bootup on powerpc   Andy Whitcroft
• [PATCH] [POWERPC] fsldma: Use compatiable binding as spec   Dan Williams
• [PATCHv2 2/3] ep8248e: Reference SMC parameter RAM base in the device tree.   Scott Wood
• [PATCHv2 2/3] ep8248e: Reference SMC parameter RAM base in thedevice tree.   Scott Wood
• [PATCHv3 2/4] cpm-serial: Relocate CPM buffer descriptors and SMC parameter ram.   Scott Wood
• [PATCHv4 0/5] cpm2: Reset the CPM at startup and fix the cpm_uart driver accordingly.   Scott Wood
• [PATCH] Freescale QUICC Engine USB Host Controller   Scott Wood
• [PATCH] Freescale QUICC Engine USB Host Controller   Scott Wood
• [kvm-ppc-devel] [PATCH] Add idle wait support for 44x platforms   Scott Wood
• MPC8343 - "unable to handle paging request @ 0"   Scott Wood
• [RFC][PATCH] initial port of fixmap over from x86 for ppc32   Scott Wood
• a question about use dtb to bootting linux kernel on MPC83xx platform   Scott Wood
• [RFC][PATCH] initial port of fixmap over from x86 for ppc32   Scott Wood
• MPC8343 - "unable to handle paging request @ 0"   Scott Wood
• MPC8343 - "unable to handle paging request @ 0"   Scott Wood
• Question on mpc52xx_common.c   Scott Wood
• [PATCH] [POWERPC] 83xx/85xx: Reorganize defconfigs   Scott Wood
• [PATCH] FCC: fix confused base / offset   Scott Wood
• [PATCH] FCC: fix confused base / offset   Scott Wood
• MPC8343 - "unable to handle paging request @ 0"   Scott Wood
• MPC8343 - "unable to handle paging request @ 0"   Scott Wood
• [PATCH] FCC: fix confused base / offset   Scott Wood
• [PATCH] CPM: Always use new binding.   Scott Wood
• [PATCH] CPM: Always use new binding.   Scott Wood
• [PATCH7/7] [POWERPC] Add i2c pins to dts and board setup   Scott Wood
• [PATCH v2.6.26] gianfar: Determine TBIPA value dynamically   Scott Wood
• Flash on LocalBus @ MPC8343   Scott Wood
• [PATCH 2/8] [POWERPC] fsl_lbc: implement few routines to manage FSL UPMs   Scott Wood
• [PATCH] 86xx: mark functions static, other minor cleanups   Scott Wood
• [PATCH v2.6.26] gianfar: Determine TBIPA value dynamically   Scott Wood
• Flash on LocalBus @ MPC8343   Scott Wood
• Flash on LocalBus @ MPC8343   Scott Wood
• Flash on LocalBus @ MPC8343   Scott Wood
• [RFC] Using two baud rate generators with the cpm_uart driver   Scott Wood
• [RFC] Using two baud rate generators with the cpm_uart driver   Scott Wood
• [RESEND PATCH] cuboot-pq2: PCI fixes   Scott Wood
• [PATCH] mpc8313erdb: Update defconfig, enabling FCM NAND and OF partitions   Scott Wood
• [PATCH] fsl_soc: Factor fsl_get_sys_freq() out of the wdt and spi inits.   Scott Wood
• [PATCH] mpc8313erdb: Update defconfig, enabling FCM NAND and OF partitions   Scott Wood
• [PATCH] fsl_soc: Factor fsl_get_sys_freq() out of the wdt and spi inits.   Scott Wood
• [PATCH 6/8] [POWERPC] sysdev,qe_lib: implement FSL GTM support   Scott Wood
• lseek() on entries in /proc/device-tree returns EINVAL   Scott Wood
• [PATCH 6/8] [POWERPC] sysdev,qe_lib: implement FSL GTM support   Scott Wood
• [PATCH v2][POWERPC] qe_lib and ucc_geth: switch to the cpm_muram implementation   Scott Wood
• [PATCH 6/8] [POWERPC] sysdev,qe_lib: implement FSL GTM support   Scott Wood
• [PATCH] [POWERPC] fsl: Convert dts to v1 syntax   Scott Wood
• [PATCH 6/8] [POWERPC] sysdev,qe_lib: implement FSL GTM support   Scott Wood
• [PATCH 6/8] [POWERPC] sysdev,qe_lib: implement FSL GTM support   Scott Wood
• [PATCH 2/5] [POWERPC] QE: add support for QE USB clocks routing   Scott Wood
• [PATCH 2/5] [POWERPC] QE: add support for QE USB clocks routing   Scott Wood
• [PATCH 2/5] [POWERPC] QE: add support for QE USB clocks routing   Scott Wood
• [RFC fs_enet: Convert MII bitbang driver to use GPIO lib   Scott Wood
• [PATCH] [PPC] Remove mpc8272 ads board from arch/ppc   Scott Wood
• [PATCH 1/5] [POWERPC] sysdev: implement FSL GTM support   Scott Wood
• [PATCH] [PPC] Remove mpc8272 ads board from arch/ppc   Scott Wood
• [RFC fs_enet: Convert MII bitbang driver to use GPIO lib   Scott Wood
• [RFC fs_enet: Convert MII bitbang driver to use GPIO lib   Scott Wood
• [RFC fs_enet: Convert MII bitbang driver to use GPIO lib   Scott Wood
• Question on MPC83xx interrupts   Scott Wood
• Question on MPC83xx interrupts   Scott Wood
• Question on MPC83xx interrupts   Scott Wood
• [RFC POWERPC] booting-without-of: bindings for FHCI USB, GPIO LEDs, MCU, and NAND on UPM   Scott Wood
• filenames with spaces in /sys?   Scott Wood
• [PATCH 7/7] linkstation: implement standby   Scott Wood
• suggestions on handling additional exception levels on ppc32   Scott Wood
• suggestions on handling additional exception levels on ppc32   Scott Wood
• [PATCH] MTD: fix partition scan control logic in physmap_ofand fsl_elbc_nand   Scott Wood
• [PATCH 4/7] mpc83xx: timer driver for PM wakeup   Scott Wood
• [PATCH 1/2] [MTD] Add support for RAM & ROMmappings in the physmap_of MTD driver.   Scott Wood
• [PATCH 1/7] Implement arch disable/enable irq hooks.   Scott Wood
• [RESEND][PATCH][POWERPC] PIKA Warp: Update platform code to supportRev B boards   Scott Wood
• [PATCH] [POWERPC] convert transfer_to_handler into a macro   Scott Wood
• SKB corruption on heavy traffic   Scott Wood
• [PATCH] [POWERPC] convert transfer_to_handler into a macro   Scott Wood
• [PATCH 1/8] [POWERPC] fsl_elbc_nand: factor out localbus defines   David Woodhouse
• [EFIKA] Really, don't pretend to be CHRP   David Woodhouse
• PATCH 2/5] Platform code   David Woodhouse
• [EFIKA] Really, don't pretend to be CHRP   David Woodhouse
• [EFIKA] Really, don't pretend to be CHRP   David Woodhouse
• removal of arch/ppc in 2.6.27?   David Woodhouse
• [PATCH] MTD: fix partition scan control logic in physmap_of and fsl_elbc_nand   David Woodhouse
• [PATCH 1/2] [MTD] Add support for RAM & ROM mappings in the physmap_of MTD driver.   David Woodhouse
• [PATCH 1/2] [MTD] Add support for RAM & ROM mappings in the physmap_of MTD driver.   David Woodhouse
• [PATCH, RESEND] RTC class driver for ppc_md RTC functions   David Woodhouse
• Patches pushed to powerpc.git master and powerpc-next branches   David Woodhouse
• filenames with spaces in /sys?   David Woodhouse
• [kvm-ppc-devel] [PATCH] Add idle power save for ppc 4xx   Jimi Xenidis
• [kvm-ppc-devel] [PATCH] [v2] Add idle wait support for 44x platforms   Jimi Xenidis
• [PATCH v2][POWERPC] qe_lib and ucc_geth: switch to the cpm_muram implementation   Li Yang
• A question about the 8250/16550 Driver   Li Yang
• [PATCH v2][POWERPC] qe_lib and ucc_geth: switch to the cpm_muram implementation   Li Yang
• [PATCH] MTD: fix partition scan control logic in physmap_ofand fsl_elbc_nand   Li Yang
• [PATCH] Add idle power save for ppc 4xx   Jerone Young
• [kvm-ppc-devel] [PATCH] Add idle power save for ppc 4xx   Jerone Young
• [PATCH] Add idle power save for ppc 4xx   Jerone Young
• [PATCH] Add idle power save for ppc 4xx   Jerone Young
• [PATCH] Add idle wait support for 44x platforms   Jerone Young
• [PATCH] Add idle wait support for 44x platforms   Jerone Young
• [PATCH] Add idle wait support for 44x platforms   Jerone Young
• [kvm-ppc-devel] [PATCH] Add idle wait support for 44x platforms   Jerone Young
• [PATCH] [v2] Add idle wait support for 44x platforms   Jerone Young
• [kvm-ppc-devel] [PATCH] [v2] Add idle wait support for 44x platforms   Jerone Young
• [PATCH] [v3] Add idle wait support for 44x platforms   Jerone Young
• [PATCH] [v4] Add idle wait support for 44x platforms   Jerone Young
• [PATCH] [v5] Add idle wait support for 44x platforms   Jerone Young
• [PATCH] [v5] Add idle wait support for 44x platforms   Jerone Young
• [PATCH] [v6] Add idle wait support for 44x platforms   Jerone Young
• [PATCH 1/3] MSI driver for Freescale 83xx/85xx/86xx cpu   Jin Zhengxiong
• [PATCH 1/3] MSI driver for Freescale 83xx/85xx/86xx cpu   Jin Zhengxiong
• [PATCH v2] MSI driver for Freescale 83xx/85xx/86xx cpu   Jin Zhengxiong
• [PATCH] siimage: fix kernel oops on PPC 44x   Bartlomiej Zolnierkiewicz
• [PATCH] siimage: fix kernel oops on PPC 44x   Bartlomiej Zolnierkiewicz
• [PATCH] ide: make ide_pci_check_iomem() actually work   Bartlomiej Zolnierkiewicz
• [PATCH] scc_pata.c: do setup itself instead of ide_setup_pci_device ()   Bartlomiej Zolnierkiewicz
• [PATCH] ide: make ide_pci_check_iomem() actually work   Bartlomiej Zolnierkiewicz
• [PATCH] [IDE] alim15x3: disable init_hwif_ali15x3 for PowerPC   Bartlomiej Zolnierkiewicz
• Signal backtrace function   Detlev Zundel
• Signal backtrace function   Detlev Zundel
• [RFC] [PATCH 0/5] [POWERPC] Implement dma_*map*_attrs() and DMA_ATTR_WEAK_ORDERING and use on Cell   markn at au1.ibm.com
• [RFC] [PATCH 1/5] [POWERPC] dma: implement new dma_*map*_attrs() interfaces   markn at au1.ibm.com
• [RFC] [PATCH 2/5] [POWERPC] dma: use the struct dma_attrs in iommu code   markn at au1.ibm.com
• [RFC] [PATCH 3/5] [POWERPC] Make cell_dma_dev_setup_iommu() return the iommu table   markn at au1.ibm.com
• [RFC] [PATCH 4/5] [POWERPC] Move device_to_mask() to dma-mapping.h   markn at au1.ibm.com
• [RFC] [PATCH 5/5] [POWERPC] Add DMA_ATTR_WEAK_ORDERING dma attribute and use in Cell IOMMU code   markn at au1.ibm.com
• [MailServer Resend] Quarantined email -- use caution when opening.Re: [PATCH 3/3] Use __weak macro for smp_setup_processor_id   Helpdesk at digi.com
• [MailServer Resend] Quarantined email -- use caution when opening.Re: [PATCH 3/3] Use __weak macro for smp_setup_processor_id   Helpdesk at digi.com
• interrupt latency spi   mejjad lahcen
• EP852   nikam_research at ms.messung.com
• [PATCH 8/9] celleb: move miscellaneous files for Beat   kou.ishizaki at toshiba.co.jp
• MCC problem of MPC8568   mike zheng
• a question about use dtb to bootting linux kernel on MPC83xx platform   旭 罗
• a question about serial driver on MPC8313   旭 罗
• A question about the 8250/16550 Driver   旭 罗
• 回复： RE: A question about the 8250/16550 Driver   旭 罗

Last message date: Wed Apr 30 23:26:26 EST 2008
Archived on: Fri Jun 5 17:13:55 EST 2009

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...