fec_mpc5200: reset FEC on error

[Robert Schwebel]

From: Sascha Hauer <s.hauer at pengutronix.de>

The error handling for the mpc5200 fec interrupt is broken. The intended
behaviour is like this:

* If one of FEC_IEVENT_RFIFO_ERROR and FEC_IEVENT_XFIFO_ERROR happens,
  the datasheet says (MPC5200B User's Guide R1.2, p. 14-13): "When this
  occurs, software must ensure both the FIFO Controller and BestComm are
  soft-reset".

* On any other error (non-TFINT) interrupt, just issue a debug message.

v2 changed to -p1 and posted on linuxppc list (2008-04-15).

v1 posted on linuxppc list (2008-04-15).

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>

---
 drivers/net/fec_mpc52xx.c |   23 +++++++++++++----------
 1 file changed, 13 insertions(+), 10 deletions(-)

Index: drivers/net/fec_mpc52xx.c
===================================================================
--- a/drivers/net/fec_mpc52xx.c.orig
+++ b/drivers/net/fec_mpc52xx.c
@@ -491,20 +491,23 @@
 
 	out_be32(&fec->ievent, ievent);		/* clear pending events */
 
-	if (ievent & ~(FEC_IEVENT_RFIFO_ERROR | FEC_IEVENT_XFIFO_ERROR)) {
-		if (ievent & ~FEC_IEVENT_TFINT)
-			dev_dbg(&dev->dev, "ievent: %08x\n", ievent);
+	/* on fifo error, soft-reset fec */
+	if (ievent & (FEC_IEVENT_RFIFO_ERROR | FEC_IEVENT_XFIFO_ERROR)) {
+
+		if (net_ratelimit() && (ievent & FEC_IEVENT_RFIFO_ERROR))
+			dev_warn(&dev->dev, "FEC_IEVENT_RFIFO_ERROR\n");
+		if (net_ratelimit() && (ievent & FEC_IEVENT_XFIFO_ERROR))
+			dev_warn(&dev->dev, "FEC_IEVENT_XFIFO_ERROR\n");
+
+		mpc52xx_fec_reset(dev);
+
+		netif_wake_queue(dev);
 		return IRQ_HANDLED;
 	}
 
-	if (net_ratelimit() && (ievent & FEC_IEVENT_RFIFO_ERROR))
-		dev_warn(&dev->dev, "FEC_IEVENT_RFIFO_ERROR\n");
-	if (net_ratelimit() && (ievent & FEC_IEVENT_XFIFO_ERROR))
-		dev_warn(&dev->dev, "FEC_IEVENT_XFIFO_ERROR\n");
-
-	mpc52xx_fec_reset(dev);
+	if (ievent & ~FEC_IEVENT_TFINT)
+		dev_dbg(&dev->dev, "ievent: %08x\n", ievent);
 
-	netif_wake_queue(dev);
 	return IRQ_HANDLED;
 }