Xilinx network trouble (mostly solved)
Stephen Neuendorffer
stephen.neuendorffer at xilinx.com
Tue Apr 22 02:50:47 EST 2008
The easiest way is to edit the .mhs by hand.
Steve
> -----Original Message-----
> From: linuxppc-dev-bounces+stephen.neuendorffer=xilinx.com at ozlabs.org
[mailto:linuxppc-dev-
> bounces+stephen.neuendorffer=xilinx.com at ozlabs.org] On Behalf Of
Guillaume Dargaud
> Sent: Monday, April 21, 2008 9:16 AM
> To: Rick Moleres; linuxppc-dev at ozlabs.org
> Subject: Re: Xilinx network trouble (mostly solved)
>
> Hi Rick,
>
> > You might try v1.00a of the xps_ll_temac core. There are a couple
of
> > issues with v1.00b (posted previously on this list) that may (or may
> > not) be causing the problem you see.
>
> Thanks for the answer... but I can't figure out how to revert to
1.00a. Is
> the option accessible from xps ?
>
> As for the EmacLite, it works rather imperfectly:
> ping -s 2952 works
> ping -s 2953 doesn't...:
> [ 2340.664293] Badness at net/core/skbuff.c:317
> [ 2340.668479] NIP: c015bd24 LR: c015b3f4 CTR: 00000000
> [ 2340.673410] REGS: c7d0fd20 TRAP: 0700 Not tainted
(2.6.24-rc8-xlnx)
> [ 2340.679876] MSR: 00029030 <EE,ME,IR,DR> CR: 28000048 XER:
20000000
> [ 2340.686189] TASK = c7c35810[243] 'ping' THREAD: c7d0e000
> [ 2340.691279] GPR00: 00000001 c7d0fdd0 c7c35810 c7d318e0 80000009
00000004
> c027bd38 00000200
> [ 2340.699571] GPR08: c7d0fdb8 c7d0e000 c027bd1c c0159910 c7d0fdb8
100b46f4
> ffffffff 00000000
> [ 2340.707864] GPR16: 10090000 100bd6e0 100b0000 100b0000 00000c11
7fbcf9a0
> 00000000 10004634
> [ 2340.716158] GPR24: 1007d370 7fbced90 10003fbc 100adf18 00000000
00000000
> c7c9e000 c7d318e0
> [ 2340.724625] NIP [c015bd24] skb_release_all+0x6c/0x94
> [ 2340.729551] LR [c015b3f4] __kfree_skb+0x18/0xc0
> [ 2340.734042] Call Trace:
> [ 2340.736465] [c7d0fdd0] [c0161b6c] netif_rx+0x124/0x158 (unreliable)
> [ 2340.742684] [c7d0fde0] [c015b3f4] __kfree_skb+0x18/0xc0
> [ 2340.747866] [c7d0fdf0] [c01466a0] SendHandler+0x44/0x94
> [ 2340.753050] [c7d0fe10] [c0147284]
XEmacLite_InterruptHandler+0x12c/0x140
> [ 2340.759702] [c7d0fe20] [c0146078] xemaclite_interrupt+0x20/0x34
> [ 2340.765577] [c7d0fe30] [c003c98c] handle_IRQ_event+0x4c/0xa0
> [ 2340.771193] [c7d0fe50] [c003ca94] __do_IRQ+0xb4/0x130
> [ 2340.776203] [c7d0fe70] [c0006990] do_IRQ+0x6c/0xa4
> [ 2340.780954] [c7d0fe80] [c000329c] ret_from_except+0x0/0x18
> [ 2340.786397] [c7d0ff40] [c0002c50] ret_from_syscall+0x0/0x3c
> [ 2340.791923] Instruction dump:
> [ 2340.794865] 3000ffff 7c005a2c 7c00592d 40a2fff0 817f006c 54290024
> 2f8b0000 419e0024
> [ 2340.802549] 8009000c 5400011e 7c0000d0 54000ffe <0f000000> 7fe3fb78
> 7d6903a6 4e800421
> (192.168.1.185): 2953 data bytes
> --
> Guillaume Dargaud
> http://www.gdargaud.net/
>
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
More information about the Linuxppc-dev
mailing list