[PATCH] [IDE] alim15x3: disable init_hwif_ali15x3 for PowerPC

Bartlomiej Zolnierkiewicz bzolnier at gmail.com
Wed Apr 30 07:01:38 EST 2008


On Tuesday 29 April 2008, Anton Vorontsov wrote:
> We don't need init_hwif_ali15x3() on the PowerPC systems either.
> 
> Before:
> 
> ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc8) at  PCI slot 0001:03:1f.0
> ALI15X3: 100% native mode on irq 19
>     ide0: BM-DMA at 0x1120-0x1127
>     ide1: BM-DMA at 0x1128-0x112f
> hda: SONY DVD RW AW-Q170A, ATAPI CD/DVD-ROM drive
> hda: UDMA/66 mode selected
> ide0: Disabled unable to get IRQ 14.
> ide0: failed to initialize IDE interface
> ide1: Disabled unable to get IRQ 15.
> ide1: failed to initialize IDE interface
> 
> After:
> 
> ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc8) at  PCI slot 0001:03:1f.0
> ALI15X3: 100% native mode on irq 19
>     ide0: BM-DMA at 0x1120-0x1127
>     ide1: BM-DMA at 0x1128-0x112f
> hda: SONY DVD RW AW-Q170A, ATAPI CD/DVD-ROM drive
> hda: UDMA/66 mode selected
> ide0 at 0x1100-0x1107,0x110a on irq 19
> ide1 at 0x1110-0x1117,0x111a on irq 19
> hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
> 
> ide0 works well, though I can't test ide1, it isn't traced out on
> the board.
> 
> Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>

applied, thanks



More information about the Linuxppc-dev mailing list