[PATCH 5/5] [POWERPC] 83xx: new board support: MPC8360E-RDK

Grant Likely grant.likely at secretlab.ca
Tue Apr 22 07:05:25 EST 2008


On Fri, Apr 18, 2008 at 1:10 PM, Anton Vorontsov
<avorontsov at ru.mvista.com> wrote:
> This is patch adds board file, device tree, and defconfig for the new
>  board, made by Freescale Semiconductor Inc. and Logic Product Development.

>   arch/powerpc/platforms/83xx/mpc836x_rdk.c       |  106 +++

I don't see anything exotic in here.  This can be merged with one of
the other non-exotic mpc83xx board files.  The dts parsing takes care
of the differences.

Cheers,
g.


-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.

>   5 files changed, 1601 insertions(+), 0 deletions(-)
>   create mode 100644 arch/powerpc/boot/dts/mpc836x_rdk.dts
>   create mode 100644 arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
>   create mode 100644 arch/powerpc/platforms/83xx/mpc836x_rdk.c
>
>  diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
>  new file mode 100644
>  index 0000000..39a7dcb
>  --- /dev/null
>  +++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
>  @@ -0,0 +1,394 @@
>  +/*
>  + * MPC8360E RDK Device Tree Source
>  + *
>  + * Copyright 2006 Freescale Semiconductor Inc.
>  + * Copyright 2007-2008 MontaVista Software, Inc.
>  + *
>  + * Author: Anton Vorontsov <avorontsov at ru.mvista.com>
>  + *
>  + * This program is free software; you can redistribute  it and/or modify it
>  + * under  the terms of  the GNU General  Public License as published by the
>  + * Free Software Foundation;  either version 2 of the  License, or (at your
>  + * option) any later version.
>  + */
>  +
>  +/dts-v1/;
>  +
>  +/ {
>  +       #address-cells = <1>;
>  +       #size-cells = <1>;
>  +       compatible = "fsl,mpc8360rdk";
>  +
>  +       aliases {
>  +               serial0 = &serial0;
>  +               serial1 = &serial1;
>  +               serial2 = &serial2;
>  +               serial3 = &serial3;
>  +               ethernet0 = &enet0;
>  +               ethernet1 = &enet1;
>  +               ethernet2 = &enet2;
>  +               ethernet3 = &enet3;
>  +               pci0 = &pci0;
>  +       };
>  +
>  +       cpus {
>  +               #address-cells = <1>;
>  +               #size-cells = <0>;
>  +
>  +               PowerPC,8360 at 0 {
>  +                       device_type = "cpu";
>  +                       reg = <0>;
>  +                       d-cache-line-size = <32>;
>  +                       i-cache-line-size = <32>;
>  +                       d-cache-size = <32768>;
>  +                       i-cache-size = <32768>;
>  +                       /* filled by u-boot */
>  +                       timebase-frequency = <0>;
>  +                       bus-frequency = <0>;
>  +                       clock-frequency = <0>;
>  +               };
>  +       };
>  +
>  +       memory {
>  +               device_type = "memory";
>  +               /* filled by u-boot */
>  +               reg = <0 0>;
>  +       };
>  +
>  +       soc at e0000000 {
>  +               #address-cells = <1>;
>  +               #size-cells = <1>;
>  +               device_type = "soc";
>  +               compatible = "fsl,mpc8360-immr", "fsl,immr", "fsl,soc",
>  +                            "simple-bus";
>  +               ranges = <0 0xe0000000 0x200000>;
>  +               reg = <0xe0000000 0x200>;
>  +               /* filled by u-boot */
>  +               bus-frequency = <0>;
>  +
>  +               wdt at 200 {
>  +                       compatible = "mpc83xx_wdt";
>  +                       reg = <0x200 0x100>;
>  +               };
>  +
>  +               i2c at 3000 {
>  +                       #address-cells = <1>;
>  +                       #size-cells = <0>;
>  +                       cell-index = <0>;
>  +                       compatible = "fsl-i2c";
>  +                       reg = <0x3000 0x100>;
>  +                       interrupts = <14 8>;
>  +                       interrupt-parent = <&ipic>;
>  +                       dfsrr;
>  +               };
>  +
>  +               i2c at 3100 {
>  +                       #address-cells = <1>;
>  +                       #size-cells = <0>;
>  +                       cell-index = <1>;
>  +                       compatible = "fsl-i2c";
>  +                       reg = <0x3100 0x100>;
>  +                       interrupts = <16 8>;
>  +                       interrupt-parent = <&ipic>;
>  +                       dfsrr;
>  +               };
>  +
>  +               serial0: serial at 4500 {
>  +                       device_type = "serial";
>  +                       compatible = "ns16550";
>  +                       reg = <0x4500 0x100>;
>  +                       interrupts = <9 8>;
>  +                       interrupt-parent = <&ipic>;
>  +                       /* filled by u-boot */
>  +                       clock-frequency = <0>;
>  +               };
>  +
>  +               serial1: serial at 4600 {
>  +                       device_type = "serial";
>  +                       compatible = "ns16550";
>  +                       reg = <0x4600 0x100>;
>  +                       interrupts = <10 8>;
>  +                       interrupt-parent = <&ipic>;
>  +                       /* filled by u-boot */
>  +                       clock-frequency = <0>;
>  +               };
>  +
>  +               crypto at 30000 {
>  +                       compatible = "fsl,sec2-crypto";
>  +                       reg = <0x30000 0x10000>;
>  +                       interrupts = <11 8>;
>  +                       interrupt-parent = <&ipic>;
>  +                       num-channels = <4>;
>  +                       channel-fifo-len = <24>;
>  +                       exec-units-mask = <0x7e>;
>  +                       /*
>  +                        * desc mask is for rev1.x, we need runtime fixup
>  +                        * for >=2.x
>  +                        */
>  +                       descriptor-types-mask = <0x1010ebf>;
>  +               };
>  +
>  +               ipic: interrupt-controller at 700 {
>  +                       #address-cells = <0>;
>  +                       #interrupt-cells = <2>;
>  +                       compatible = "fsl,pq2pro-pic", "fsl,ipic";
>  +                       interrupt-controller;
>  +                       reg = <0x700 0x100>;
>  +               };
>  +
>  +               qe_pio_b: gpio-controller at 1418 {
>  +                       #gpio-cells = <2>;
>  +                       compatible = "fsl,qe-pario-bank";
>  +                       reg = <0x1418 0x18>;
>  +                       gpio-controller;
>  +               };
>  +
>  +               qe_pio_e: gpio-controller at 1460 {
>  +                       #gpio-cells = <2>;
>  +                       compatible = "fsl,qe-pario-bank";
>  +                       reg = <0x1460 0x18>;
>  +                       gpio-controller;
>  +               };
>  +
>  +               qe at 100000 {
>  +                       #address-cells = <1>;
>  +                       #size-cells = <1>;
>  +                       device_type = "qe";
>  +                       compatible = "fsl,qe", "simple-bus";
>  +                       ranges = <0 0x100000 0x100000>;
>  +                       reg = <0x100000 0x480>;
>  +                       /* filled by u-boot */
>  +                       clock-frequency = <0>;
>  +                       bus-frequency = <0>;
>  +                       brg-frequency = <0>;
>  +
>  +                       muram at 10000 {
>  +                               #address-cells = <1>;
>  +                               #size-cells = <1>;
>  +                               compatible = "fsl,qe-muram", "fsl,cpm-muram";
>  +                               ranges = <0 0x10000 0xc000>;
>  +
>  +                               data-only at 0 {
>  +                                       compatible = "fsl,qe-muram-data",
>  +                                                    "fsl,cpm-muram-data";
>  +                                       reg = <0 0xc000>;
>  +                               };
>  +                       };
>  +
>  +                       timer at 440 {
>  +                               compatible = "fsl,qe-gtm", "fsl,gtm";
>  +                               reg = <0x440 0x40>;
>  +                               interrupts = <12 13 14 15>;
>  +                               interrupt-parent = <&qeic>;
>  +                               /* filled by u-boot */
>  +                               clock-frequency = <0>;
>  +                       };
>  +
>  +                       spi at 4c0 {
>  +                               cell-index = <0>;
>  +                               compatible = "fsl,spi";
>  +                               reg = <0x4c0 0x40>;
>  +                               interrupts = <2>;
>  +                               interrupt-parent = <&qeic>;
>  +                               mode = "cpu-qe";
>  +                       };
>  +
>  +                       spi at 500 {
>  +                               cell-index = <1>;
>  +                               compatible = "fsl,spi";
>  +                               reg = <0x500 0x40>;
>  +                               interrupts = <1>;
>  +                               interrupt-parent = <&qeic>;
>  +                               mode = "cpu-qe";
>  +                       };
>  +
>  +                       enet0: ucc at 2000 {
>  +                               device_type = "network";
>  +                               compatible = "ucc_geth";
>  +                               cell-index = <1>;
>  +                               reg = <0x2000 0x200>;
>  +                               interrupts = <32>;
>  +                               interrupt-parent = <&qeic>;
>  +                               rx-clock-name = "none";
>  +                               tx-clock-name = "clk9";
>  +                               phy-handle = <&phy2>;
>  +                               phy-connection-type = "rgmii-rxid";
>  +                               /* filled by u-boot */
>  +                               local-mac-address = [ 00 00 00 00 00 00 ];
>  +                       };
>  +
>  +                       enet1: ucc at 3000 {
>  +                               device_type = "network";
>  +                               compatible = "ucc_geth";
>  +                               cell-index = <2>;
>  +                               reg = <0x3000 0x200>;
>  +                               interrupts = <33>;
>  +                               interrupt-parent = <&qeic>;
>  +                               rx-clock-name = "none";
>  +                               tx-clock-name = "clk4";
>  +                               phy-handle = <&phy4>;
>  +                               phy-connection-type = "rgmii-rxid";
>  +                               /* filled by u-boot */
>  +                               local-mac-address = [ 00 00 00 00 00 00 ];
>  +                       };
>  +
>  +                       enet2: ucc at 2600 {
>  +                               device_type = "network";
>  +                               compatible = "ucc_geth";
>  +                               cell-index = <7>;
>  +                               reg = <0x2600 0x200>;
>  +                               interrupts = <42>;
>  +                               interrupt-parent = <&qeic>;
>  +                               rx-clock-name = "clk20";
>  +                               tx-clock-name = "clk19";
>  +                               phy-handle = <&phy1>;
>  +                               phy-connection-type = "mii";
>  +                               /* filled by u-boot */
>  +                               local-mac-address = [ 00 00 00 00 00 00 ];
>  +                       };
>  +
>  +                       enet3: ucc at 3200 {
>  +                               device_type = "network";
>  +                               compatible = "ucc_geth";
>  +                               cell-index = <4>;
>  +                               reg = <0x3200 0x200>;
>  +                               interrupts = <35>;
>  +                               interrupt-parent = <&qeic>;
>  +                               rx-clock-name = "clk8";
>  +                               tx-clock-name = "clk7";
>  +                               phy-handle = <&phy3>;
>  +                               phy-connection-type = "mii";
>  +                               /* filled by u-boot */
>  +                               local-mac-address = [ 00 00 00 00 00 00 ];
>  +                       };
>  +
>  +                       mdio at 2120 {
>  +                               #address-cells = <1>;
>  +                               #size-cells = <0>;
>  +                               compatible = "fsl,ucc-mdio";
>  +                               reg = <0x2120 0x18>;
>  +
>  +                               phy1: ethernet-phy at 1 {
>  +                                       device_type = "ethernet-phy";
>  +                                       compatible = "national,DP83848VV";
>  +                                       reg = <1>;
>  +                               };
>  +
>  +                               phy2: ethernet-phy at 2 {
>  +                                       device_type = "ethernet-phy";
>  +                                       compatible = "broadcom,BCM5481UA2KMLG";
>  +                                       reg = <2>;
>  +                               };
>  +
>  +                               phy3: ethernet-phy at 3 {
>  +                                       device_type = "ethernet-phy";
>  +                                       compatible = "national,DP83848VV";
>  +                                       reg = <3>;
>  +                               };
>  +
>  +                               phy4: ethernet-phy at 4 {
>  +                                       device_type = "ethernet-phy";
>  +                                       compatible = "broadcom,BCM5481UA2KMLG";
>  +                                       reg = <4>;
>  +                               };
>  +                       };
>  +
>  +                       serial2: ucc at 2400 {
>  +                               device_type = "serial";
>  +                               compatible = "ucc_uart";
>  +                               reg = <0x2400 0x200>;
>  +                               cell-index = <5>;
>  +                               port-number = <0>;
>  +                               rx-clock-name = "brg7";
>  +                               tx-clock-name = "brg8";
>  +                               interrupts = <40>;
>  +                               interrupt-parent = <&qeic>;
>  +                               soft-uart;
>  +                       };
>  +
>  +                       serial3: ucc at 3400 {
>  +                               device_type = "serial";
>  +                               compatible = "ucc_uart";
>  +                               reg = <0x3400 0x200>;
>  +                               cell-index = <6>;
>  +                               port-number = <1>;
>  +                               rx-clock-name = "brg13";
>  +                               tx-clock-name = "brg14";
>  +                               interrupts = <41>;
>  +                               interrupt-parent = <&qeic>;
>  +                               soft-uart;
>  +                       };
>  +
>  +                       qeic: interrupt-controller at 80 {
>  +                               #address-cells = <0>;
>  +                               #interrupt-cells = <1>;
>  +                               compatible = "fsl,qe-ic";
>  +                               interrupt-controller;
>  +                               reg = <0x80 0x80>;
>  +                               big-endian;
>  +                               interrupts = <32 8 33 8>;
>  +                               interrupt-parent = <&ipic>;
>  +                       };
>  +               };
>  +       };
>  +
>  +       localbus at e0005000 {
>  +               #address-cells = <2>;
>  +               #size-cells = <1>;
>  +               compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
>  +                            "simple-bus";
>  +               reg = <0xe0005000 0xd8>;
>  +               ranges = <0 0 0xff800000 0x0800000
>  +                         1 0 0x60000000 0x0001000
>  +                         2 0 0x70000000 0x4000000>;
>  +
>  +               flash at 0,0 {
>  +                       compatible = "intel,PC28F640P30T85", "cfi-flash";
>  +                       reg = <0 0 0x800000>;
>  +                       bank-width = <2>;
>  +                       device-width = <1>;
>  +               };
>  +
>  +               display at 2,0 {
>  +                       device_type = "display";
>  +                       compatible = "fujitsu,MB86277", "fujitsu,mint";
>  +                       reg = <2 0 0x4000000>;
>  +                       fujitsu,sh3;
>  +                       little-endian;
>  +                       /* filled by u-boot */
>  +                       address = <0>;
>  +                       depth = <0>;
>  +                       width = <0>;
>  +                       height = <0>;
>  +                       linebytes = <0>;
>  +                       /* linux,opened; - added by uboot */
>  +               };
>  +       };
>  +
>  +       pci0: pci at e0008500 {
>  +               #address-cells = <3>;
>  +               #size-cells = <2>;
>  +               #interrupt-cells = <1>;
>  +               device_type = "pci";
>  +               compatible = "fsl,mpc8360-pci", "fsl,mpc8349-pci";
>  +               reg = <0xe0008500 0x100>;
>  +               ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
>  +                         0x42000000 0 0x80000000 0x80000000 0 0x10000000
>  +                         0x01000000 0 0xe0300000 0xe0300000 0 0x00100000>;
>  +               interrupts = <66 8>;
>  +               interrupt-parent = <&ipic>;
>  +               interrupt-map-mask = <0xf800 0 0 7>;
>  +               interrupt-map = </* miniPCI0 IDSEL 0x14 AD20 */
>  +                                0xa000 0 0 1 &ipic 18 8
>  +                                0xa000 0 0 2 &ipic 19 8
>  +
>  +                                /* PCI1 IDSEL 0x15 AD21 */
>  +                                0xa800 0 0 1 &ipic 19 8
>  +                                0xa800 0 0 2 &ipic 20 8
>  +                                0xa800 0 0 3 &ipic 21 8
>  +                                0xa800 0 0 4 &ipic 18 8>;
>  +               /* filled by u-boot */
>  +               bus-range = <0 0>;
>  +               clock-frequency = <0>;
>  +       };
>  +};
>  diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
>  new file mode 100644
>  index 0000000..f8bde7b
>  --- /dev/null
>  +++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
>  @@ -0,0 +1,1092 @@
>  +#
>  +# Automatically generated make config: don't edit
>  +# Linux kernel version: 2.6.25-rc9
>  +# Fri Apr 18 22:25:18 2008
>  +#
>  +# CONFIG_PPC64 is not set
>  +
>  +#
>  +# Processor support
>  +#
>  +CONFIG_6xx=y
>  +# CONFIG_PPC_85xx is not set
>  +# CONFIG_PPC_8xx is not set
>  +# CONFIG_40x is not set
>  +# CONFIG_44x is not set
>  +# CONFIG_E200 is not set
>  +CONFIG_PPC_FPU=y
>  +# CONFIG_FSL_EMB_PERFMON is not set
>  +CONFIG_PPC_STD_MMU=y
>  +CONFIG_PPC_STD_MMU_32=y
>  +# CONFIG_PPC_MM_SLICES is not set
>  +# CONFIG_SMP is not set
>  +CONFIG_PPC32=y
>  +CONFIG_WORD_SIZE=32
>  +CONFIG_PPC_MERGE=y
>  +CONFIG_MMU=y
>  +CONFIG_GENERIC_CMOS_UPDATE=y
>  +CONFIG_GENERIC_TIME=y
>  +CONFIG_GENERIC_TIME_VSYSCALL=y
>  +CONFIG_GENERIC_CLOCKEVENTS=y
>  +CONFIG_GENERIC_HARDIRQS=y
>  +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
>  +CONFIG_IRQ_PER_CPU=y
>  +CONFIG_RWSEM_XCHGADD_ALGORITHM=y
>  +CONFIG_ARCH_HAS_ILOG2_U32=y
>  +CONFIG_GENERIC_HWEIGHT=y
>  +CONFIG_GENERIC_CALIBRATE_DELAY=y
>  +CONFIG_GENERIC_FIND_NEXT_BIT=y
>  +CONFIG_GENERIC_GPIO=y
>  +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
>  +CONFIG_PPC=y
>  +CONFIG_EARLY_PRINTK=y
>  +CONFIG_GENERIC_NVRAM=y
>  +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
>  +CONFIG_ARCH_MAY_HAVE_PC_FDC=y
>  +CONFIG_PPC_OF=y
>  +CONFIG_OF=y
>  +CONFIG_PPC_UDBG_16550=y
>  +# CONFIG_GENERIC_TBSYNC is not set
>  +CONFIG_AUDIT_ARCH=y
>  +CONFIG_GENERIC_BUG=y
>  +CONFIG_DEFAULT_UIMAGE=y
>  +# CONFIG_PPC_DCR_NATIVE is not set
>  +# CONFIG_PPC_DCR_MMIO is not set
>  +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
>  +
>  +#
>  +# General setup
>  +#
>  +CONFIG_EXPERIMENTAL=y
>  +CONFIG_BROKEN_ON_SMP=y
>  +CONFIG_INIT_ENV_ARG_LIMIT=32
>  +CONFIG_LOCALVERSION=""
>  +CONFIG_LOCALVERSION_AUTO=y
>  +CONFIG_SWAP=y
>  +CONFIG_SYSVIPC=y
>  +CONFIG_SYSVIPC_SYSCTL=y
>  +# CONFIG_POSIX_MQUEUE is not set
>  +# CONFIG_BSD_PROCESS_ACCT is not set
>  +# CONFIG_TASKSTATS is not set
>  +# CONFIG_AUDIT is not set
>  +# CONFIG_IKCONFIG is not set
>  +CONFIG_LOG_BUF_SHIFT=14
>  +# CONFIG_CGROUPS is not set
>  +CONFIG_GROUP_SCHED=y
>  +CONFIG_FAIR_GROUP_SCHED=y
>  +# CONFIG_RT_GROUP_SCHED is not set
>  +CONFIG_USER_SCHED=y
>  +# CONFIG_CGROUP_SCHED is not set
>  +CONFIG_SYSFS_DEPRECATED=y
>  +CONFIG_SYSFS_DEPRECATED_V2=y
>  +# CONFIG_RELAY is not set
>  +# CONFIG_NAMESPACES is not set
>  +CONFIG_BLK_DEV_INITRD=y
>  +CONFIG_INITRAMFS_SOURCE=""
>  +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
>  +CONFIG_SYSCTL=y
>  +CONFIG_EMBEDDED=y
>  +CONFIG_SYSCTL_SYSCALL=y
>  +# CONFIG_KALLSYMS is not set
>  +CONFIG_HOTPLUG=y
>  +CONFIG_PRINTK=y
>  +CONFIG_BUG=y
>  +CONFIG_ELF_CORE=y
>  +CONFIG_COMPAT_BRK=y
>  +CONFIG_BASE_FULL=y
>  +CONFIG_FUTEX=y
>  +CONFIG_ANON_INODES=y
>  +# CONFIG_EPOLL is not set
>  +CONFIG_SIGNALFD=y
>  +CONFIG_TIMERFD=y
>  +CONFIG_EVENTFD=y
>  +CONFIG_SHMEM=y
>  +CONFIG_VM_EVENT_COUNTERS=y
>  +CONFIG_SLUB_DEBUG=y
>  +# CONFIG_SLAB is not set
>  +CONFIG_SLUB=y
>  +# CONFIG_SLOB is not set
>  +# CONFIG_PROFILING is not set
>  +# CONFIG_MARKERS is not set
>  +CONFIG_HAVE_OPROFILE=y
>  +CONFIG_HAVE_KPROBES=y
>  +CONFIG_HAVE_KRETPROBES=y
>  +CONFIG_PROC_PAGE_MONITOR=y
>  +CONFIG_SLABINFO=y
>  +CONFIG_RT_MUTEXES=y
>  +# CONFIG_TINY_SHMEM is not set
>  +CONFIG_BASE_SMALL=0
>  +CONFIG_MODULES=y
>  +CONFIG_MODULE_UNLOAD=y
>  +# CONFIG_MODULE_FORCE_UNLOAD is not set
>  +# CONFIG_MODVERSIONS is not set
>  +# CONFIG_MODULE_SRCVERSION_ALL is not set
>  +# CONFIG_KMOD is not set
>  +CONFIG_BLOCK=y
>  +# CONFIG_LBD is not set
>  +# CONFIG_BLK_DEV_IO_TRACE is not set
>  +# CONFIG_LSF is not set
>  +# CONFIG_BLK_DEV_BSG is not set
>  +
>  +#
>  +# IO Schedulers
>  +#
>  +CONFIG_IOSCHED_NOOP=y
>  +CONFIG_IOSCHED_AS=y
>  +CONFIG_IOSCHED_DEADLINE=y
>  +CONFIG_IOSCHED_CFQ=y
>  +CONFIG_DEFAULT_AS=y
>  +# CONFIG_DEFAULT_DEADLINE is not set
>  +# CONFIG_DEFAULT_CFQ is not set
>  +# CONFIG_DEFAULT_NOOP is not set
>  +CONFIG_DEFAULT_IOSCHED="anticipatory"
>  +CONFIG_CLASSIC_RCU=y
>  +
>  +#
>  +# Platform support
>  +#
>  +# CONFIG_PPC_MULTIPLATFORM is not set
>  +# CONFIG_PPC_82xx is not set
>  +CONFIG_PPC_83xx=y
>  +# CONFIG_PPC_86xx is not set
>  +# CONFIG_PPC_MPC512x is not set
>  +# CONFIG_PPC_MPC5121 is not set
>  +# CONFIG_PPC_CELL is not set
>  +# CONFIG_PPC_CELL_NATIVE is not set
>  +# CONFIG_PQ2ADS is not set
>  +CONFIG_MPC83xx=y
>  +# CONFIG_MPC831x_RDB is not set
>  +# CONFIG_MPC832x_MDS is not set
>  +# CONFIG_MPC832x_RDB is not set
>  +# CONFIG_MPC834x_MDS is not set
>  +# CONFIG_MPC834x_ITX is not set
>  +# CONFIG_MPC836x_MDS is not set
>  +CONFIG_MPC836x_RDK=y
>  +# CONFIG_MPC837x_MDS is not set
>  +# CONFIG_MPC837x_RDB is not set
>  +# CONFIG_SBC834x is not set
>  +CONFIG_IPIC=y
>  +# CONFIG_MPIC is not set
>  +# CONFIG_MPIC_WEIRD is not set
>  +# CONFIG_PPC_I8259 is not set
>  +# CONFIG_PPC_RTAS is not set
>  +# CONFIG_MMIO_NVRAM is not set
>  +# CONFIG_PPC_MPC106 is not set
>  +# CONFIG_PPC_970_NAP is not set
>  +# CONFIG_PPC_INDIRECT_IO is not set
>  +# CONFIG_GENERIC_IOMAP is not set
>  +# CONFIG_CPU_FREQ is not set
>  +CONFIG_QUICC_ENGINE=y
>  +# CONFIG_FSL_ULI1575 is not set
>  +
>  +#
>  +# Kernel options
>  +#
>  +# CONFIG_HIGHMEM is not set
>  +# CONFIG_TICK_ONESHOT is not set
>  +# CONFIG_NO_HZ is not set
>  +# CONFIG_HIGH_RES_TIMERS is not set
>  +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
>  +# CONFIG_HZ_100 is not set
>  +CONFIG_HZ_250=y
>  +# CONFIG_HZ_300 is not set
>  +# CONFIG_HZ_1000 is not set
>  +CONFIG_HZ=250
>  +# CONFIG_SCHED_HRTICK is not set
>  +CONFIG_PREEMPT_NONE=y
>  +# CONFIG_PREEMPT_VOLUNTARY is not set
>  +# CONFIG_PREEMPT is not set
>  +CONFIG_BINFMT_ELF=y
>  +# CONFIG_BINFMT_MISC is not set
>  +# CONFIG_IOMMU_HELPER is not set
>  +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
>  +CONFIG_ARCH_HAS_WALK_MEMORY=y
>  +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
>  +CONFIG_ARCH_FLATMEM_ENABLE=y
>  +CONFIG_ARCH_POPULATES_NODE_MAP=y
>  +CONFIG_SELECT_MEMORY_MODEL=y
>  +CONFIG_FLATMEM_MANUAL=y
>  +# CONFIG_DISCONTIGMEM_MANUAL is not set
>  +# CONFIG_SPARSEMEM_MANUAL is not set
>  +CONFIG_FLATMEM=y
>  +CONFIG_FLAT_NODE_MEM_MAP=y
>  +# CONFIG_SPARSEMEM_STATIC is not set
>  +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
>  +CONFIG_SPLIT_PTLOCK_CPUS=4
>  +# CONFIG_RESOURCES_64BIT is not set
>  +CONFIG_ZONE_DMA_FLAG=1
>  +CONFIG_BOUNCE=y
>  +CONFIG_VIRT_TO_BUS=y
>  +CONFIG_FORCE_MAX_ZONEORDER=11
>  +CONFIG_PROC_DEVICETREE=y
>  +# CONFIG_CMDLINE_BOOL is not set
>  +# CONFIG_PM is not set
>  +CONFIG_SECCOMP=y
>  +CONFIG_ISA_DMA_API=y
>  +
>  +#
>  +# Bus options
>  +#
>  +CONFIG_ZONE_DMA=y
>  +CONFIG_GENERIC_ISA_DMA=y
>  +CONFIG_PPC_INDIRECT_PCI=y
>  +CONFIG_FSL_SOC=y
>  +CONFIG_PCI=y
>  +CONFIG_PCI_DOMAINS=y
>  +CONFIG_PCI_SYSCALL=y
>  +# CONFIG_PCIEPORTBUS is not set
>  +CONFIG_ARCH_SUPPORTS_MSI=y
>  +# CONFIG_PCI_MSI is not set
>  +CONFIG_PCI_LEGACY=y
>  +# CONFIG_PCCARD is not set
>  +# CONFIG_HOTPLUG_PCI is not set
>  +
>  +#
>  +# Advanced setup
>  +#
>  +# CONFIG_ADVANCED_OPTIONS is not set
>  +
>  +#
>  +# Default settings for advanced configuration options are used
>  +#
>  +CONFIG_HIGHMEM_START=0xfe000000
>  +CONFIG_LOWMEM_SIZE=0x30000000
>  +CONFIG_KERNEL_START=0xc0000000
>  +CONFIG_TASK_SIZE=0xc0000000
>  +
>  +#
>  +# Networking
>  +#
>  +CONFIG_NET=y
>  +
>  +#
>  +# Networking options
>  +#
>  +CONFIG_PACKET=y
>  +# CONFIG_PACKET_MMAP is not set
>  +CONFIG_UNIX=y
>  +CONFIG_XFRM=y
>  +# CONFIG_XFRM_USER is not set
>  +# CONFIG_XFRM_SUB_POLICY is not set
>  +# CONFIG_XFRM_MIGRATE is not set
>  +# CONFIG_XFRM_STATISTICS is not set
>  +# CONFIG_NET_KEY is not set
>  +CONFIG_INET=y
>  +CONFIG_IP_MULTICAST=y
>  +# CONFIG_IP_ADVANCED_ROUTER is not set
>  +CONFIG_IP_FIB_HASH=y
>  +CONFIG_IP_PNP=y
>  +CONFIG_IP_PNP_DHCP=y
>  +CONFIG_IP_PNP_BOOTP=y
>  +# CONFIG_IP_PNP_RARP is not set
>  +# CONFIG_NET_IPIP is not set
>  +# CONFIG_NET_IPGRE is not set
>  +# CONFIG_IP_MROUTE is not set
>  +# CONFIG_ARPD is not set
>  +CONFIG_SYN_COOKIES=y
>  +# CONFIG_INET_AH is not set
>  +# CONFIG_INET_ESP is not set
>  +# CONFIG_INET_IPCOMP is not set
>  +# CONFIG_INET_XFRM_TUNNEL is not set
>  +# CONFIG_INET_TUNNEL is not set
>  +CONFIG_INET_XFRM_MODE_TRANSPORT=y
>  +CONFIG_INET_XFRM_MODE_TUNNEL=y
>  +CONFIG_INET_XFRM_MODE_BEET=y
>  +# CONFIG_INET_LRO is not set
>  +CONFIG_INET_DIAG=y
>  +CONFIG_INET_TCP_DIAG=y
>  +# CONFIG_TCP_CONG_ADVANCED is not set
>  +CONFIG_TCP_CONG_CUBIC=y
>  +CONFIG_DEFAULT_TCP_CONG="cubic"
>  +# CONFIG_TCP_MD5SIG is not set
>  +# CONFIG_IPV6 is not set
>  +# CONFIG_INET6_XFRM_TUNNEL is not set
>  +# CONFIG_INET6_TUNNEL is not set
>  +# CONFIG_NETWORK_SECMARK is not set
>  +# CONFIG_NETFILTER is not set
>  +# CONFIG_IP_DCCP is not set
>  +# CONFIG_IP_SCTP is not set
>  +# CONFIG_TIPC is not set
>  +# CONFIG_ATM is not set
>  +# CONFIG_BRIDGE is not set
>  +# CONFIG_VLAN_8021Q is not set
>  +# CONFIG_DECNET is not set
>  +# CONFIG_LLC2 is not set
>  +# CONFIG_IPX is not set
>  +# CONFIG_ATALK is not set
>  +# CONFIG_X25 is not set
>  +# CONFIG_LAPB is not set
>  +# CONFIG_ECONET is not set
>  +# CONFIG_WAN_ROUTER is not set
>  +# CONFIG_NET_SCHED is not set
>  +
>  +#
>  +# Network testing
>  +#
>  +# CONFIG_NET_PKTGEN is not set
>  +# CONFIG_HAMRADIO is not set
>  +# CONFIG_CAN is not set
>  +# CONFIG_IRDA is not set
>  +# CONFIG_BT is not set
>  +# CONFIG_AF_RXRPC is not set
>  +
>  +#
>  +# Wireless
>  +#
>  +# CONFIG_CFG80211 is not set
>  +# CONFIG_WIRELESS_EXT is not set
>  +# CONFIG_MAC80211 is not set
>  +# CONFIG_IEEE80211 is not set
>  +# CONFIG_RFKILL is not set
>  +# CONFIG_NET_9P is not set
>  +
>  +#
>  +# Device Drivers
>  +#
>  +
>  +#
>  +# Generic Driver Options
>  +#
>  +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
>  +CONFIG_STANDALONE=y
>  +CONFIG_PREVENT_FIRMWARE_BUILD=y
>  +CONFIG_FW_LOADER=y
>  +# CONFIG_SYS_HYPERVISOR is not set
>  +# CONFIG_CONNECTOR is not set
>  +CONFIG_MTD=y
>  +# CONFIG_MTD_DEBUG is not set
>  +# CONFIG_MTD_CONCAT is not set
>  +CONFIG_MTD_PARTITIONS=y
>  +# CONFIG_MTD_REDBOOT_PARTS is not set
>  +CONFIG_MTD_CMDLINE_PARTS=y
>  +# CONFIG_MTD_OF_PARTS is not set
>  +
>  +#
>  +# User Modules And Translation Layers
>  +#
>  +CONFIG_MTD_CHAR=y
>  +CONFIG_MTD_BLKDEVS=y
>  +CONFIG_MTD_BLOCK=y
>  +# CONFIG_FTL is not set
>  +# CONFIG_NFTL is not set
>  +# CONFIG_INFTL is not set
>  +# CONFIG_RFD_FTL is not set
>  +# CONFIG_SSFDC is not set
>  +# CONFIG_MTD_OOPS is not set
>  +
>  +#
>  +# RAM/ROM/Flash chip drivers
>  +#
>  +CONFIG_MTD_CFI=y
>  +# CONFIG_MTD_JEDECPROBE is not set
>  +CONFIG_MTD_GEN_PROBE=y
>  +CONFIG_MTD_CFI_ADV_OPTIONS=y
>  +CONFIG_MTD_CFI_NOSWAP=y
>  +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
>  +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
>  +# CONFIG_MTD_CFI_GEOMETRY is not set
>  +CONFIG_MTD_MAP_BANK_WIDTH_1=y
>  +CONFIG_MTD_MAP_BANK_WIDTH_2=y
>  +CONFIG_MTD_MAP_BANK_WIDTH_4=y
>  +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
>  +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
>  +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
>  +CONFIG_MTD_CFI_I1=y
>  +CONFIG_MTD_CFI_I2=y
>  +# CONFIG_MTD_CFI_I4 is not set
>  +# CONFIG_MTD_CFI_I8 is not set
>  +# CONFIG_MTD_OTP is not set
>  +CONFIG_MTD_CFI_INTELEXT=y
>  +# CONFIG_MTD_CFI_AMDSTD is not set
>  +# CONFIG_MTD_CFI_STAA is not set
>  +CONFIG_MTD_CFI_UTIL=y
>  +# CONFIG_MTD_RAM is not set
>  +# CONFIG_MTD_ROM is not set
>  +# CONFIG_MTD_ABSENT is not set
>  +
>  +#
>  +# Mapping drivers for chip access
>  +#
>  +# CONFIG_MTD_COMPLEX_MAPPINGS is not set
>  +# CONFIG_MTD_PHYSMAP is not set
>  +CONFIG_MTD_PHYSMAP_OF=y
>  +# CONFIG_MTD_INTEL_VR_NOR is not set
>  +# CONFIG_MTD_PLATRAM is not set
>  +
>  +#
>  +# Self-contained MTD device drivers
>  +#
>  +# CONFIG_MTD_PMC551 is not set
>  +# CONFIG_MTD_DATAFLASH is not set
>  +# CONFIG_MTD_M25P80 is not set
>  +# CONFIG_MTD_SLRAM is not set
>  +# CONFIG_MTD_PHRAM is not set
>  +# CONFIG_MTD_MTDRAM is not set
>  +# CONFIG_MTD_BLOCK2MTD is not set
>  +
>  +#
>  +# Disk-On-Chip Device Drivers
>  +#
>  +# CONFIG_MTD_DOC2000 is not set
>  +# CONFIG_MTD_DOC2001 is not set
>  +# CONFIG_MTD_DOC2001PLUS is not set
>  +# CONFIG_MTD_NAND is not set
>  +# CONFIG_MTD_ONENAND is not set
>  +
>  +#
>  +# UBI - Unsorted block images
>  +#
>  +# CONFIG_MTD_UBI is not set
>  +CONFIG_OF_DEVICE=y
>  +CONFIG_OF_GPIO=y
>  +CONFIG_OF_I2C=y
>  +# CONFIG_PARPORT is not set
>  +CONFIG_BLK_DEV=y
>  +# CONFIG_BLK_DEV_FD is not set
>  +# CONFIG_BLK_CPQ_DA is not set
>  +# CONFIG_BLK_CPQ_CISS_DA is not set
>  +# CONFIG_BLK_DEV_DAC960 is not set
>  +# CONFIG_BLK_DEV_UMEM is not set
>  +# CONFIG_BLK_DEV_COW_COMMON is not set
>  +CONFIG_BLK_DEV_LOOP=y
>  +# CONFIG_BLK_DEV_CRYPTOLOOP is not set
>  +# CONFIG_BLK_DEV_NBD is not set
>  +# CONFIG_BLK_DEV_SX8 is not set
>  +CONFIG_BLK_DEV_RAM=y
>  +CONFIG_BLK_DEV_RAM_COUNT=16
>  +CONFIG_BLK_DEV_RAM_SIZE=32768
>  +# CONFIG_BLK_DEV_XIP is not set
>  +# CONFIG_CDROM_PKTCDVD is not set
>  +# CONFIG_ATA_OVER_ETH is not set
>  +CONFIG_MISC_DEVICES=y
>  +# CONFIG_PHANTOM is not set
>  +# CONFIG_EEPROM_93CX6 is not set
>  +# CONFIG_SGI_IOC4 is not set
>  +# CONFIG_TIFM_CORE is not set
>  +# CONFIG_ENCLOSURE_SERVICES is not set
>  +CONFIG_HAVE_IDE=y
>  +# CONFIG_IDE is not set
>  +
>  +#
>  +# SCSI device support
>  +#
>  +# CONFIG_RAID_ATTRS is not set
>  +# CONFIG_SCSI is not set
>  +# CONFIG_SCSI_DMA is not set
>  +# CONFIG_SCSI_NETLINK is not set
>  +# CONFIG_ATA is not set
>  +# CONFIG_MD is not set
>  +# CONFIG_FUSION is not set
>  +
>  +#
>  +# IEEE 1394 (FireWire) support
>  +#
>  +# CONFIG_FIREWIRE is not set
>  +# CONFIG_IEEE1394 is not set
>  +# CONFIG_I2O is not set
>  +# CONFIG_MACINTOSH_DRIVERS is not set
>  +CONFIG_NETDEVICES=y
>  +# CONFIG_NETDEVICES_MULTIQUEUE is not set
>  +# CONFIG_DUMMY is not set
>  +# CONFIG_BONDING is not set
>  +# CONFIG_MACVLAN is not set
>  +# CONFIG_EQUALIZER is not set
>  +# CONFIG_TUN is not set
>  +# CONFIG_VETH is not set
>  +# CONFIG_ARCNET is not set
>  +CONFIG_PHYLIB=y
>  +
>  +#
>  +# MII PHY device drivers
>  +#
>  +# CONFIG_MARVELL_PHY is not set
>  +# CONFIG_DAVICOM_PHY is not set
>  +# CONFIG_QSEMI_PHY is not set
>  +# CONFIG_LXT_PHY is not set
>  +# CONFIG_CICADA_PHY is not set
>  +# CONFIG_VITESSE_PHY is not set
>  +# CONFIG_SMSC_PHY is not set
>  +CONFIG_BROADCOM_PHY=y
>  +# CONFIG_ICPLUS_PHY is not set
>  +# CONFIG_REALTEK_PHY is not set
>  +# CONFIG_FIXED_PHY is not set
>  +# CONFIG_MDIO_BITBANG is not set
>  +# CONFIG_NET_ETHERNET is not set
>  +CONFIG_NETDEV_1000=y
>  +# CONFIG_ACENIC is not set
>  +# CONFIG_DL2K is not set
>  +# CONFIG_E1000 is not set
>  +# CONFIG_E1000E is not set
>  +# CONFIG_E1000E_ENABLED is not set
>  +# CONFIG_IP1000 is not set
>  +# CONFIG_IGB is not set
>  +# CONFIG_NS83820 is not set
>  +# CONFIG_HAMACHI is not set
>  +# CONFIG_YELLOWFIN is not set
>  +# CONFIG_R8169 is not set
>  +# CONFIG_SIS190 is not set
>  +# CONFIG_SKGE is not set
>  +# CONFIG_SKY2 is not set
>  +# CONFIG_SK98LIN is not set
>  +# CONFIG_VIA_VELOCITY is not set
>  +# CONFIG_TIGON3 is not set
>  +# CONFIG_BNX2 is not set
>  +# CONFIG_GIANFAR is not set
>  +CONFIG_UCC_GETH=y
>  +CONFIG_UGETH_NAPI=y
>  +# CONFIG_UGETH_MAGIC_PACKET is not set
>  +# CONFIG_UGETH_FILTERING is not set
>  +# CONFIG_UGETH_TX_ON_DEMAND is not set
>  +# CONFIG_QLA3XXX is not set
>  +# CONFIG_ATL1 is not set
>  +# CONFIG_NETDEV_10000 is not set
>  +# CONFIG_TR is not set
>  +
>  +#
>  +# Wireless LAN
>  +#
>  +# CONFIG_WLAN_PRE80211 is not set
>  +# CONFIG_WLAN_80211 is not set
>  +# CONFIG_WAN is not set
>  +# CONFIG_FDDI is not set
>  +# CONFIG_HIPPI is not set
>  +# CONFIG_PPP is not set
>  +# CONFIG_SLIP is not set
>  +# CONFIG_NETCONSOLE is not set
>  +# CONFIG_NETPOLL is not set
>  +# CONFIG_NET_POLL_CONTROLLER is not set
>  +# CONFIG_ISDN is not set
>  +# CONFIG_PHONE is not set
>  +
>  +#
>  +# Input device support
>  +#
>  +CONFIG_INPUT=y
>  +# CONFIG_INPUT_FF_MEMLESS is not set
>  +# CONFIG_INPUT_POLLDEV is not set
>  +
>  +#
>  +# Userland interfaces
>  +#
>  +# CONFIG_INPUT_MOUSEDEV is not set
>  +# CONFIG_INPUT_JOYDEV is not set
>  +# CONFIG_INPUT_EVDEV is not set
>  +# CONFIG_INPUT_EVBUG is not set
>  +
>  +#
>  +# Input Device Drivers
>  +#
>  +# CONFIG_INPUT_KEYBOARD is not set
>  +# CONFIG_INPUT_MOUSE is not set
>  +# CONFIG_INPUT_JOYSTICK is not set
>  +# CONFIG_INPUT_TABLET is not set
>  +# CONFIG_INPUT_TOUCHSCREEN is not set
>  +# CONFIG_INPUT_MISC is not set
>  +
>  +#
>  +# Hardware I/O ports
>  +#
>  +# CONFIG_SERIO is not set
>  +# CONFIG_GAMEPORT is not set
>  +
>  +#
>  +# Character devices
>  +#
>  +CONFIG_VT=y
>  +CONFIG_VT_CONSOLE=y
>  +CONFIG_HW_CONSOLE=y
>  +# CONFIG_VT_HW_CONSOLE_BINDING is not set
>  +# CONFIG_SERIAL_NONSTANDARD is not set
>  +# CONFIG_NOZOMI is not set
>  +
>  +#
>  +# Serial drivers
>  +#
>  +CONFIG_SERIAL_8250=y
>  +CONFIG_SERIAL_8250_CONSOLE=y
>  +CONFIG_SERIAL_8250_PCI=y
>  +CONFIG_SERIAL_8250_NR_UARTS=4
>  +CONFIG_SERIAL_8250_RUNTIME_UARTS=4
>  +# CONFIG_SERIAL_8250_EXTENDED is not set
>  +
>  +#
>  +# Non-8250 serial port support
>  +#
>  +# CONFIG_SERIAL_UARTLITE is not set
>  +CONFIG_SERIAL_CORE=y
>  +CONFIG_SERIAL_CORE_CONSOLE=y
>  +# CONFIG_SERIAL_JSM is not set
>  +# CONFIG_SERIAL_OF_PLATFORM is not set
>  +CONFIG_SERIAL_QE=y
>  +CONFIG_UNIX98_PTYS=y
>  +CONFIG_LEGACY_PTYS=y
>  +CONFIG_LEGACY_PTY_COUNT=256
>  +# CONFIG_IPMI_HANDLER is not set
>  +CONFIG_HW_RANDOM=y
>  +# CONFIG_NVRAM is not set
>  +# CONFIG_GEN_RTC is not set
>  +# CONFIG_R3964 is not set
>  +# CONFIG_APPLICOM is not set
>  +# CONFIG_RAW_DRIVER is not set
>  +# CONFIG_TCG_TPM is not set
>  +CONFIG_DEVPORT=y
>  +CONFIG_I2C=y
>  +CONFIG_I2C_BOARDINFO=y
>  +CONFIG_I2C_CHARDEV=y
>  +
>  +#
>  +# I2C Algorithms
>  +#
>  +# CONFIG_I2C_ALGOBIT is not set
>  +# CONFIG_I2C_ALGOPCF is not set
>  +# CONFIG_I2C_ALGOPCA is not set
>  +
>  +#
>  +# I2C Hardware Bus support
>  +#
>  +# CONFIG_I2C_ALI1535 is not set
>  +# CONFIG_I2C_ALI1563 is not set
>  +# CONFIG_I2C_ALI15X3 is not set
>  +# CONFIG_I2C_AMD756 is not set
>  +# CONFIG_I2C_AMD8111 is not set
>  +# CONFIG_I2C_GPIO is not set
>  +# CONFIG_I2C_I801 is not set
>  +# CONFIG_I2C_I810 is not set
>  +# CONFIG_I2C_PIIX4 is not set
>  +CONFIG_I2C_MPC=y
>  +# CONFIG_I2C_NFORCE2 is not set
>  +# CONFIG_I2C_OCORES is not set
>  +# CONFIG_I2C_PARPORT_LIGHT is not set
>  +# CONFIG_I2C_PROSAVAGE is not set
>  +# CONFIG_I2C_SAVAGE4 is not set
>  +# CONFIG_I2C_SIMTEC is not set
>  +# CONFIG_I2C_SIS5595 is not set
>  +# CONFIG_I2C_SIS630 is not set
>  +# CONFIG_I2C_SIS96X is not set
>  +# CONFIG_I2C_TAOS_EVM is not set
>  +# CONFIG_I2C_STUB is not set
>  +# CONFIG_I2C_VIA is not set
>  +# CONFIG_I2C_VIAPRO is not set
>  +# CONFIG_I2C_VOODOO3 is not set
>  +
>  +#
>  +# Miscellaneous I2C Chip support
>  +#
>  +# CONFIG_DS1682 is not set
>  +# CONFIG_SENSORS_EEPROM is not set
>  +# CONFIG_SENSORS_PCF8574 is not set
>  +# CONFIG_PCF8575 is not set
>  +# CONFIG_SENSORS_PCF8591 is not set
>  +# CONFIG_TPS65010 is not set
>  +# CONFIG_SENSORS_MAX6875 is not set
>  +# CONFIG_SENSORS_TSL2550 is not set
>  +# CONFIG_I2C_DEBUG_CORE is not set
>  +# CONFIG_I2C_DEBUG_ALGO is not set
>  +# CONFIG_I2C_DEBUG_BUS is not set
>  +# CONFIG_I2C_DEBUG_CHIP is not set
>  +
>  +#
>  +# SPI support
>  +#
>  +CONFIG_SPI=y
>  +CONFIG_SPI_MASTER=y
>  +
>  +#
>  +# SPI Master Controller Drivers
>  +#
>  +CONFIG_SPI_BITBANG=y
>  +CONFIG_SPI_MPC83xx=y
>  +
>  +#
>  +# SPI Protocol Masters
>  +#
>  +# CONFIG_SPI_AT25 is not set
>  +CONFIG_SPI_SPIDEV=y
>  +# CONFIG_SPI_TLE62X0 is not set
>  +CONFIG_HAVE_GPIO_LIB=y
>  +
>  +#
>  +# GPIO Support
>  +#
>  +
>  +#
>  +# On-chip GPIOs:
>  +#
>  +CONFIG_GPIO_QE=y
>  +
>  +#
>  +# I2C GPIO expanders:
>  +#
>  +# CONFIG_GPIO_PCA953X is not set
>  +# CONFIG_GPIO_PCF857X is not set
>  +
>  +#
>  +# SPI GPIO expanders:
>  +#
>  +# CONFIG_GPIO_MCP23S08 is not set
>  +# CONFIG_W1 is not set
>  +# CONFIG_POWER_SUPPLY is not set
>  +# CONFIG_HWMON is not set
>  +# CONFIG_THERMAL is not set
>  +CONFIG_WATCHDOG=y
>  +# CONFIG_WATCHDOG_NOWAYOUT is not set
>  +
>  +#
>  +# Watchdog Device Drivers
>  +#
>  +# CONFIG_SOFT_WATCHDOG is not set
>  +CONFIG_83xx_WDT=y
>  +
>  +#
>  +# PCI-based Watchdog Cards
>  +#
>  +# CONFIG_PCIPCWATCHDOG is not set
>  +# CONFIG_WDTPCI is not set
>  +
>  +#
>  +# Sonics Silicon Backplane
>  +#
>  +CONFIG_SSB_POSSIBLE=y
>  +# CONFIG_SSB is not set
>  +
>  +#
>  +# Multifunction device drivers
>  +#
>  +# CONFIG_MFD_SM501 is not set
>  +
>  +#
>  +# Multimedia devices
>  +#
>  +# CONFIG_VIDEO_DEV is not set
>  +# CONFIG_DVB_CORE is not set
>  +CONFIG_DAB=y
>  +
>  +#
>  +# Graphics support
>  +#
>  +# CONFIG_AGP is not set
>  +# CONFIG_DRM is not set
>  +# CONFIG_VGASTATE is not set
>  +# CONFIG_VIDEO_OUTPUT_CONTROL is not set
>  +CONFIG_FB=y
>  +# CONFIG_FIRMWARE_EDID is not set
>  +# CONFIG_FB_DDC is not set
>  +CONFIG_FB_CFB_FILLRECT=y
>  +CONFIG_FB_CFB_COPYAREA=y
>  +CONFIG_FB_CFB_IMAGEBLIT=y
>  +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
>  +# CONFIG_FB_SYS_FILLRECT is not set
>  +# CONFIG_FB_SYS_COPYAREA is not set
>  +# CONFIG_FB_SYS_IMAGEBLIT is not set
>  +# CONFIG_FB_SYS_FOPS is not set
>  +CONFIG_FB_DEFERRED_IO=y
>  +# CONFIG_FB_SVGALIB is not set
>  +CONFIG_FB_MACMODES=y
>  +# CONFIG_FB_BACKLIGHT is not set
>  +# CONFIG_FB_MODE_HELPERS is not set
>  +# CONFIG_FB_TILEBLITTING is not set
>  +
>  +#
>  +# Frame buffer hardware drivers
>  +#
>  +# CONFIG_FB_CIRRUS is not set
>  +# CONFIG_FB_PM2 is not set
>  +# CONFIG_FB_CYBER2000 is not set
>  +CONFIG_FB_OF=y
>  +# CONFIG_FB_CT65550 is not set
>  +# CONFIG_FB_ASILIANT is not set
>  +# CONFIG_FB_IMSTT is not set
>  +# CONFIG_FB_VGA16 is not set
>  +# CONFIG_FB_S1D13XXX is not set
>  +# CONFIG_FB_NVIDIA is not set
>  +# CONFIG_FB_RIVA is not set
>  +# CONFIG_FB_MATROX is not set
>  +# CONFIG_FB_RADEON is not set
>  +# CONFIG_FB_ATY128 is not set
>  +# CONFIG_FB_ATY is not set
>  +# CONFIG_FB_S3 is not set
>  +# CONFIG_FB_SAVAGE is not set
>  +# CONFIG_FB_SIS is not set
>  +# CONFIG_FB_NEOMAGIC is not set
>  +# CONFIG_FB_KYRO is not set
>  +# CONFIG_FB_3DFX is not set
>  +# CONFIG_FB_VOODOO1 is not set
>  +# CONFIG_FB_VT8623 is not set
>  +# CONFIG_FB_TRIDENT is not set
>  +# CONFIG_FB_ARK is not set
>  +# CONFIG_FB_PM3 is not set
>  +# CONFIG_FB_IBM_GXT4500 is not set
>  +# CONFIG_FB_VIRTUAL is not set
>  +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
>  +
>  +#
>  +# Display device support
>  +#
>  +# CONFIG_DISPLAY_SUPPORT is not set
>  +
>  +#
>  +# Console display driver support
>  +#
>  +# CONFIG_VGA_CONSOLE is not set
>  +CONFIG_DUMMY_CONSOLE=y
>  +CONFIG_FRAMEBUFFER_CONSOLE=y
>  +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
>  +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
>  +# CONFIG_FONTS is not set
>  +CONFIG_FONT_8x8=y
>  +CONFIG_FONT_8x16=y
>  +CONFIG_LOGO=y
>  +# CONFIG_LOGO_LINUX_MONO is not set
>  +CONFIG_LOGO_LINUX_VGA16=y
>  +CONFIG_LOGO_LINUX_CLUT224=y
>  +
>  +#
>  +# Sound
>  +#
>  +# CONFIG_SOUND is not set
>  +CONFIG_HID_SUPPORT=y
>  +CONFIG_HID=y
>  +# CONFIG_HID_DEBUG is not set
>  +# CONFIG_HIDRAW is not set
>  +# CONFIG_USB_SUPPORT is not set
>  +# CONFIG_MMC is not set
>  +# CONFIG_MEMSTICK is not set
>  +# CONFIG_NEW_LEDS is not set
>  +# CONFIG_INFINIBAND is not set
>  +# CONFIG_EDAC is not set
>  +# CONFIG_RTC_CLASS is not set
>  +# CONFIG_DMADEVICES is not set
>  +
>  +#
>  +# Userspace I/O
>  +#
>  +# CONFIG_UIO is not set
>  +
>  +#
>  +# File systems
>  +#
>  +CONFIG_EXT2_FS=y
>  +# CONFIG_EXT2_FS_XATTR is not set
>  +# CONFIG_EXT2_FS_XIP is not set
>  +CONFIG_EXT3_FS=y
>  +CONFIG_EXT3_FS_XATTR=y
>  +# CONFIG_EXT3_FS_POSIX_ACL is not set
>  +# CONFIG_EXT3_FS_SECURITY is not set
>  +# CONFIG_EXT4DEV_FS is not set
>  +CONFIG_JBD=y
>  +CONFIG_FS_MBCACHE=y
>  +# CONFIG_REISERFS_FS is not set
>  +# CONFIG_JFS_FS is not set
>  +# CONFIG_FS_POSIX_ACL is not set
>  +# CONFIG_XFS_FS is not set
>  +# CONFIG_GFS2_FS is not set
>  +# CONFIG_OCFS2_FS is not set
>  +CONFIG_DNOTIFY=y
>  +CONFIG_INOTIFY=y
>  +CONFIG_INOTIFY_USER=y
>  +# CONFIG_QUOTA is not set
>  +# CONFIG_AUTOFS_FS is not set
>  +# CONFIG_AUTOFS4_FS is not set
>  +# CONFIG_FUSE_FS is not set
>  +
>  +#
>  +# CD-ROM/DVD Filesystems
>  +#
>  +# CONFIG_ISO9660_FS is not set
>  +# CONFIG_UDF_FS is not set
>  +
>  +#
>  +# DOS/FAT/NT Filesystems
>  +#
>  +# CONFIG_MSDOS_FS is not set
>  +# CONFIG_VFAT_FS is not set
>  +# CONFIG_NTFS_FS is not set
>  +
>  +#
>  +# Pseudo filesystems
>  +#
>  +CONFIG_PROC_FS=y
>  +CONFIG_PROC_KCORE=y
>  +CONFIG_PROC_SYSCTL=y
>  +CONFIG_SYSFS=y
>  +CONFIG_TMPFS=y
>  +# CONFIG_TMPFS_POSIX_ACL is not set
>  +# CONFIG_HUGETLB_PAGE is not set
>  +# CONFIG_CONFIGFS_FS is not set
>  +
>  +#
>  +# Miscellaneous filesystems
>  +#
>  +# CONFIG_ADFS_FS is not set
>  +# CONFIG_AFFS_FS is not set
>  +# CONFIG_HFS_FS is not set
>  +# CONFIG_HFSPLUS_FS is not set
>  +# CONFIG_BEFS_FS is not set
>  +# CONFIG_BFS_FS is not set
>  +# CONFIG_EFS_FS is not set
>  +CONFIG_JFFS2_FS=y
>  +CONFIG_JFFS2_FS_DEBUG=0
>  +CONFIG_JFFS2_FS_WRITEBUFFER=y
>  +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
>  +# CONFIG_JFFS2_SUMMARY is not set
>  +# CONFIG_JFFS2_FS_XATTR is not set
>  +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
>  +CONFIG_JFFS2_ZLIB=y
>  +# CONFIG_JFFS2_LZO is not set
>  +CONFIG_JFFS2_RTIME=y
>  +# CONFIG_JFFS2_RUBIN is not set
>  +# CONFIG_CRAMFS is not set
>  +# CONFIG_VXFS_FS is not set
>  +# CONFIG_MINIX_FS is not set
>  +# CONFIG_HPFS_FS is not set
>  +# CONFIG_QNX4FS_FS is not set
>  +# CONFIG_ROMFS_FS is not set
>  +# CONFIG_SYSV_FS is not set
>  +# CONFIG_UFS_FS is not set
>  +CONFIG_NETWORK_FILESYSTEMS=y
>  +CONFIG_NFS_FS=y
>  +CONFIG_NFS_V3=y
>  +# CONFIG_NFS_V3_ACL is not set
>  +CONFIG_NFS_V4=y
>  +# CONFIG_NFS_DIRECTIO is not set
>  +# CONFIG_NFSD is not set
>  +CONFIG_ROOT_NFS=y
>  +CONFIG_LOCKD=y
>  +CONFIG_LOCKD_V4=y
>  +CONFIG_NFS_COMMON=y
>  +CONFIG_SUNRPC=y
>  +CONFIG_SUNRPC_GSS=y
>  +# CONFIG_SUNRPC_BIND34 is not set
>  +CONFIG_RPCSEC_GSS_KRB5=y
>  +# CONFIG_RPCSEC_GSS_SPKM3 is not set
>  +# CONFIG_SMB_FS is not set
>  +# CONFIG_CIFS is not set
>  +# CONFIG_NCP_FS is not set
>  +# CONFIG_CODA_FS is not set
>  +# CONFIG_AFS_FS is not set
>  +
>  +#
>  +# Partition Types
>  +#
>  +CONFIG_PARTITION_ADVANCED=y
>  +# CONFIG_ACORN_PARTITION is not set
>  +# CONFIG_OSF_PARTITION is not set
>  +# CONFIG_AMIGA_PARTITION is not set
>  +# CONFIG_ATARI_PARTITION is not set
>  +# CONFIG_MAC_PARTITION is not set
>  +# CONFIG_MSDOS_PARTITION is not set
>  +# CONFIG_LDM_PARTITION is not set
>  +# CONFIG_SGI_PARTITION is not set
>  +# CONFIG_ULTRIX_PARTITION is not set
>  +# CONFIG_SUN_PARTITION is not set
>  +# CONFIG_KARMA_PARTITION is not set
>  +# CONFIG_EFI_PARTITION is not set
>  +# CONFIG_SYSV68_PARTITION is not set
>  +# CONFIG_NLS is not set
>  +# CONFIG_DLM is not set
>  +CONFIG_UCC_SLOW=y
>  +CONFIG_UCC_FAST=y
>  +CONFIG_UCC=y
>  +
>  +#
>  +# Library routines
>  +#
>  +CONFIG_BITREVERSE=y
>  +# CONFIG_CRC_CCITT is not set
>  +# CONFIG_CRC16 is not set
>  +# CONFIG_CRC_ITU_T is not set
>  +CONFIG_CRC32=y
>  +# CONFIG_CRC7 is not set
>  +# CONFIG_LIBCRC32C is not set
>  +CONFIG_ZLIB_INFLATE=y
>  +CONFIG_ZLIB_DEFLATE=y
>  +CONFIG_PLIST=y
>  +CONFIG_HAS_IOMEM=y
>  +CONFIG_HAS_IOPORT=y
>  +CONFIG_HAS_DMA=y
>  +CONFIG_HAVE_LMB=y
>  +
>  +#
>  +# Kernel hacking
>  +#
>  +# CONFIG_PRINTK_TIME is not set
>  +CONFIG_ENABLE_WARN_DEPRECATED=y
>  +CONFIG_ENABLE_MUST_CHECK=y
>  +# CONFIG_MAGIC_SYSRQ is not set
>  +# CONFIG_UNUSED_SYMBOLS is not set
>  +# CONFIG_DEBUG_FS is not set
>  +# CONFIG_HEADERS_CHECK is not set
>  +# CONFIG_DEBUG_KERNEL is not set
>  +# CONFIG_SLUB_DEBUG_ON is not set
>  +# CONFIG_SLUB_STATS is not set
>  +# CONFIG_DEBUG_BUGVERBOSE is not set
>  +# CONFIG_SAMPLES is not set
>  +CONFIG_PPC_EARLY_DEBUG=y
>  +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
>  +# CONFIG_PPC_EARLY_DEBUG_G5 is not set
>  +# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
>  +# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
>  +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
>  +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
>  +# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
>  +# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
>  +# CONFIG_PPC_EARLY_DEBUG_44x is not set
>  +# CONFIG_PPC_EARLY_DEBUG_40x is not set
>  +# CONFIG_PPC_EARLY_DEBUG_CPM is not set
>  +
>  +#
>  +# Security options
>  +#
>  +# CONFIG_KEYS is not set
>  +# CONFIG_SECURITY is not set
>  +# CONFIG_SECURITY_FILE_CAPABILITIES is not set
>  +CONFIG_CRYPTO=y
>  +CONFIG_CRYPTO_ALGAPI=y
>  +CONFIG_CRYPTO_BLKCIPHER=y
>  +# CONFIG_CRYPTO_SEQIV is not set
>  +CONFIG_CRYPTO_MANAGER=y
>  +# CONFIG_CRYPTO_HMAC is not set
>  +# CONFIG_CRYPTO_XCBC is not set
>  +# CONFIG_CRYPTO_NULL is not set
>  +# CONFIG_CRYPTO_MD4 is not set
>  +CONFIG_CRYPTO_MD5=y
>  +# CONFIG_CRYPTO_SHA1 is not set
>  +# CONFIG_CRYPTO_SHA256 is not set
>  +# CONFIG_CRYPTO_SHA512 is not set
>  +# CONFIG_CRYPTO_WP512 is not set
>  +# CONFIG_CRYPTO_TGR192 is not set
>  +# CONFIG_CRYPTO_GF128MUL is not set
>  +# CONFIG_CRYPTO_ECB is not set
>  +CONFIG_CRYPTO_CBC=y
>  +# CONFIG_CRYPTO_PCBC is not set
>  +# CONFIG_CRYPTO_LRW is not set
>  +# CONFIG_CRYPTO_XTS is not set
>  +# CONFIG_CRYPTO_CTR is not set
>  +# CONFIG_CRYPTO_GCM is not set
>  +# CONFIG_CRYPTO_CCM is not set
>  +# CONFIG_CRYPTO_CRYPTD is not set
>  +CONFIG_CRYPTO_DES=y
>  +# CONFIG_CRYPTO_FCRYPT is not set
>  +# CONFIG_CRYPTO_BLOWFISH is not set
>  +# CONFIG_CRYPTO_TWOFISH is not set
>  +# CONFIG_CRYPTO_SERPENT is not set
>  +# CONFIG_CRYPTO_AES is not set
>  +# CONFIG_CRYPTO_CAST5 is not set
>  +# CONFIG_CRYPTO_CAST6 is not set
>  +# CONFIG_CRYPTO_TEA is not set
>  +# CONFIG_CRYPTO_ARC4 is not set
>  +# CONFIG_CRYPTO_KHAZAD is not set
>  +# CONFIG_CRYPTO_ANUBIS is not set
>  +# CONFIG_CRYPTO_SEED is not set
>  +# CONFIG_CRYPTO_SALSA20 is not set
>  +# CONFIG_CRYPTO_DEFLATE is not set
>  +# CONFIG_CRYPTO_MICHAEL_MIC is not set
>  +# CONFIG_CRYPTO_CRC32C is not set
>  +# CONFIG_CRYPTO_CAMELLIA is not set
>  +# CONFIG_CRYPTO_TEST is not set
>  +# CONFIG_CRYPTO_AUTHENC is not set
>  +# CONFIG_CRYPTO_LZO is not set
>  +CONFIG_CRYPTO_HW=y
>  +# CONFIG_CRYPTO_DEV_HIFN_795X is not set
>  +# CONFIG_PPC_CLOCK is not set
>  +CONFIG_PPC_LIB_RHEAP=y
>  diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
>  index 13587e2..a5f72bb 100644
>  --- a/arch/powerpc/platforms/83xx/Kconfig
>  +++ b/arch/powerpc/platforms/83xx/Kconfig
>  @@ -58,6 +58,14 @@ config MPC836x_MDS
>         help
>           This option enables support for the MPC836x MDS Processor Board.
>
>  +config MPC836x_RDK
>  +       bool "Freescale/Logic MPC836x RDK"
>  +       select DEFAULT_UIMAGE
>  +       select QUICC_ENGINE
>  +       help
>  +         This option enables support for the MPC836x RDK Processor Board,
>  +         also known as ZOOM PowerQUICC Kit.
>  +
>   config MPC837x_MDS
>         bool "Freescale MPC837x MDS"
>         select DEFAULT_UIMAGE
>  diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
>  index 7e6dd3e..1fcda8e 100644
>  --- a/arch/powerpc/platforms/83xx/Makefile
>  +++ b/arch/powerpc/platforms/83xx/Makefile
>  @@ -8,6 +8,7 @@ obj-$(CONFIG_MPC832x_RDB)       += mpc832x_rdb.o
>   obj-$(CONFIG_MPC834x_MDS)      += mpc834x_mds.o
>   obj-$(CONFIG_MPC834x_ITX)      += mpc834x_itx.o
>   obj-$(CONFIG_MPC836x_MDS)      += mpc836x_mds.o
>  +obj-$(CONFIG_MPC836x_RDK)      += mpc836x_rdk.o
>   obj-$(CONFIG_MPC832x_MDS)      += mpc832x_mds.o
>   obj-$(CONFIG_MPC837x_MDS)      += mpc837x_mds.o
>   obj-$(CONFIG_SBC834x)          += sbc834x.o
>  diff --git a/arch/powerpc/platforms/83xx/mpc836x_rdk.c b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
>  new file mode 100644
>  index 0000000..b6c4b38
>  --- /dev/null
>  +++ b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
>  @@ -0,0 +1,106 @@
>  +/*
>  + * MPC8360E-RDK board file.
>  + *
>  + * Copyright (c) 2006  Freescale Semicondutor, Inc.
>  + * Copyright (c) 2007-2008  MontaVista Software, Inc.
>  + *
>  + * Author: Anton Vorontsov <avorontsov at ru.mvista.com>
>  + *
>  + * This program is free software; you can redistribute it and/or modify it
>  + * under  the terms of  the GNU General  Public License as published by the
>  + * Free Software Foundation;  either version 2 of the  License, or (at your
>  + * option) any later version.
>  + */
>  +
>  +#include <linux/kernel.h>
>  +#include <linux/pci.h>
>  +#include <linux/of_platform.h>
>  +#include <linux/io.h>
>  +#include <asm/prom.h>
>  +#include <asm/time.h>
>  +#include <asm/ipic.h>
>  +#include <asm/udbg.h>
>  +#include <asm/qe.h>
>  +#include <asm/qe_ic.h>
>  +#include <sysdev/fsl_soc.h>
>  +
>  +#include "mpc83xx.h"
>  +
>  +static struct of_device_id __initdata mpc836x_rdk_ids[] = {
>  +       { .compatible = "simple-bus", },
>  +       {},
>  +};
>  +
>  +static int __init mpc836x_rdk_declare_of_platform_devices(void)
>  +{
>  +       return of_platform_bus_probe(NULL, mpc836x_rdk_ids, NULL);
>  +}
>  +machine_device_initcall(mpc836x_rdk, mpc836x_rdk_declare_of_platform_devices);
>  +
>  +static void __init mpc836x_rdk_setup_arch(void)
>  +{
>  +#ifdef CONFIG_PCI
>  +       struct device_node *np;
>  +#endif
>  +
>  +       if (ppc_md.progress)
>  +               ppc_md.progress("mpc836x_rdk_setup_arch()", 0);
>  +
>  +#ifdef CONFIG_PCI
>  +       for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
>  +               mpc83xx_add_bridge(np);
>  +#endif
>  +
>  +#ifdef CONFIG_QUICC_ENGINE
>  +       qe_reset();
>  +#endif
>  +}
>  +
>  +static void __init mpc836x_rdk_init_IRQ(void)
>  +{
>  +       struct device_node *np;
>  +
>  +       np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
>  +       if (!np)
>  +               return;
>  +
>  +       ipic_init(np, 0);
>  +
>  +       /*
>  +        * Initialize the default interrupt mapping priorities,
>  +        * in case the boot rom changed something on us.
>  +        */
>  +       ipic_set_default_priority();
>  +       of_node_put(np);
>  +
>  +#ifdef CONFIG_QUICC_ENGINE
>  +       np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
>  +       if (!np)
>  +               return;
>  +
>  +       qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
>  +       of_node_put(np);
>  +#endif
>  +}
>  +
>  +/*
>  + * Called very early, MMU is off, device-tree isn't unflattened.
>  + */
>  +static int __init mpc836x_rdk_probe(void)
>  +{
>  +       unsigned long root = of_get_flat_dt_root();
>  +
>  +       return of_flat_dt_is_compatible(root, "fsl,mpc8360rdk");
>  +}
>  +
>  +define_machine(mpc836x_rdk) {
>  +       .name           = "MPC836x RDK",
>  +       .probe          = mpc836x_rdk_probe,
>  +       .setup_arch     = mpc836x_rdk_setup_arch,
>  +       .init_IRQ       = mpc836x_rdk_init_IRQ,
>  +       .get_irq        = ipic_get_irq,
>  +       .restart        = mpc83xx_restart,
>  +       .time_init      = mpc83xx_time_init,
>  +       .calibrate_decr = generic_calibrate_decr,
>  +       .progress       = udbg_progress,
>  +};
>  --
>  1.5.5
>  _______________________________________________
>  Linuxppc-dev mailing list
>  Linuxppc-dev at ozlabs.org
>  https://ozlabs.org/mailman/listinfo/linuxppc-dev
>



-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.



More information about the Linuxppc-dev mailing list