[PATCH] [POWERPC] 4xx: Add endpoint support to 4xx PCIe driver

[Stefan Roese]

On Thursday 10 April 2008, Benjamin Herrenschmidt wrote:
> On Thu, 2008-04-10 at 12:21 +0200, Stefan Roese wrote:
> > Sure, this would be optimal. But frankly, I currently have no need for
> > this
> > non U-Boot mode, and therefore I didn't implement it. This can be
> > added later
> > when really needed don't you think?
>
> It can... but on the other hand, it's not hard :-)

But it takes time. And time is as always short. :)

> > Good. But again, I would really prefer to first include this U-Boot
> > style
> > endpoint support and later add this independent device tree endpoint
> > configuration when really needed.
>
> Well, you are the one with a use case... but I do think we should
> differenciate a PCI in host mode vs. endpoint mode right away. We don't
> want the PCI stack from kicking in at all in endpoint mode, we don't
> want to bother with creating the PCI infrastructure and config space
> accessors etc...

Understood. But for this "dynamic" root-complex/endpoint configuration as 
implemented with the current version of the patch, I can't change the PCIe 
node in the dts from root-complex mode to endpoint mode, since I would loose 
root-complex functionality. Perhaps I'm missing something here.

Best regards,
Stefan