[PATCH v6] [POWERPC] 85xx: Add support for relocatble kernel (and booting at non-zero)
Kumar Gala
galak at kernel.crashing.org
Thu Apr 17 23:41:36 EST 2008
Added support to allow an 85xx kernel to be run from a non-zero physical
address (useful for cooperative asymmetric multiprocessing situations) and
kdump. The support can either be at compile time or runtime
(CONFIG_RELOCATABLE).
If CONFIG_RELOCATABLE is set, than CONFIG_PHYSICAL_START has no meaning.
However, It is will always be used to set the LOAD program header physical
address field in the resulting ELF image.
Currently we are limited to running at a physical address that is module
256M. This is due to how we map TLBs to cover lowmem and should be fixed
up to allow 64M or maybe even 16M alignment in the future. Its considered
an error to try and run a kernel at a non-aligned physical address.
All the magic for this support is accomplished by proper initializating
of the kernel memory subsystem properly and ARCH_PFN_OFFSET.
The use of ARCH_PFN_OFFSET only effects normal memory and not IO mappings.
ioremap uses map_page and isn't effected by ARCH_PFN_OFFSET.
/dev/mem continued to allow access to any physical address in the system
regardless of how CONFIG_PHYSICAL_START is set.
Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
---
Updated commit message to include details from email discussion.
Paul, let me know what else we need to do to get this into your tree.
- k
arch/powerpc/Kconfig | 69 ++++++++++++++++++++++++++++++++-
arch/powerpc/kernel/head_fsl_booke.S | 11 +++++
arch/powerpc/kernel/prom.c | 4 ++
arch/powerpc/kernel/setup_64.c | 2 +-
arch/powerpc/mm/fsl_booke_mmu.c | 2 +-
arch/powerpc/mm/init_32.c | 5 ++-
arch/powerpc/mm/init_64.c | 3 +-
arch/powerpc/mm/mem.c | 5 +-
include/asm-powerpc/kdump.h | 5 --
include/asm-powerpc/page.h | 45 ++++++++++++++++++----
include/asm-powerpc/page_32.h | 6 +++
11 files changed, 135 insertions(+), 22 deletions(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index d1fe425..e3acccd 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -638,21 +638,76 @@ config LOWMEM_SIZE
hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
default "0x30000000"
+config RELOCATABLE
+ bool "Build a relocatable kernel (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && FSL_BOOKE
+ help
+ This builds a kernel image that is capable of running at the
+ location the kernel is loaded at (some alignment restrictions may
+ exist).
+
+ One use is for the kexec on panic case where the recovery kernel
+ must live at a different physical address than the primary
+ kernel.
+
+ Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address
+ it has been loaded at and the compile time physical addresses
+ CONFIG_PHYSICAL_START is ignored. However CONFIG_PHYSICAL_START
+ setting can still be useful to bootwrappers that need to know the
+ load location of the kernel (eg. u-boot/mkimage).
+
+config PAGE_OFFSET_BOOL
+ bool "Set custom page offset address"
+ depends on ADVANCED_OPTIONS
+ help
+ This option allows you to set the kernel virtual address at which
+ the kernel will map low memory. This can be useful in optimizing
+ the virtual memory layout of the system.
+
+ Say N here unless you know what you are doing.
+
+config PAGE_OFFSET
+ hex "Virtual address of memory base" if PAGE_OFFSET_BOOL
+ default "0xc0000000"
+
config KERNEL_START_BOOL
bool "Set custom kernel base address"
depends on ADVANCED_OPTIONS
help
This option allows you to set the kernel virtual address at which
- the kernel will map low memory (the kernel image will be linked at
- this address). This can be useful in optimizing the virtual memory
- layout of the system.
+ the kernel will be loaded. Normally this should match PAGE_OFFSET
+ however there are times (like kdump) that one might not want them
+ to be the same.
Say N here unless you know what you are doing.
config KERNEL_START
hex "Virtual address of kernel base" if KERNEL_START_BOOL
+ default PAGE_OFFSET if PAGE_OFFSET_BOOL
+ default "0xc2000000" if CRASH_DUMP
default "0xc0000000"
+config PHYSICAL_START_BOOL
+ bool "Set physical address where the kernel is loaded"
+ depends on ADVANCED_OPTIONS && FLATMEM && FSL_BOOKE
+ help
+ This gives the physical address where the kernel is loaded.
+
+ Say N here unless you know what you are doing.
+
+config PHYSICAL_START
+ hex "Physical address where the kernel is loaded" if PHYSICAL_START_BOOL
+ default "0x02000000" if PPC_STD_MMU && CRASH_DUMP
+ default "0x00000000"
+
+config PHYSICAL_ALIGN
+ hex
+ default "0x10000000" if FSL_BOOKE
+ help
+ This value puts the alignment restrictions on physical address
+ where kernel is loaded and run from. Kernel is compiled for an
+ address which meets above alignment restriction.
+
config TASK_SIZE_BOOL
bool "Set custom user task size"
depends on ADVANCED_OPTIONS
@@ -699,9 +754,17 @@ config PIN_TLB
endmenu
if PPC64
+config PAGE_OFFSET
+ hex
+ default "0xc000000000000000"
config KERNEL_START
hex
+ default "0xc000000002000000" if CRASH_DUMP
default "0xc000000000000000"
+config PHYSICAL_START
+ hex
+ default "0x02000000" if CRASH_DUMP
+ default "0x00000000"
endif
source "net/Kconfig"
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 9f40b3e..4d0336b 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -368,6 +368,17 @@ skpinv: addi r6,r6,1 /* Increment */
bl early_init
+#ifdef CONFIG_RELOCATABLE
+ lis r3,kernstart_addr at ha
+ la r3,kernstart_addr at l(r3)
+#ifdef CONFIG_PHYS_64BIT
+ stw r23,0(r3)
+ stw r25,4(r3)
+#else
+ stw r25,0(r3)
+#endif
+#endif
+
mfspr r3,SPRN_TLB1CFG
andi. r3,r3,0xfff
lis r4,num_tlbcam_entries at ha
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 8a9359a..39232d9 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -53,6 +53,7 @@
#include <asm/pci-bridge.h>
#include <asm/phyp_dump.h>
#include <asm/kexec.h>
+#include <mm/mmu_decl.h>
#ifdef DEBUG
#define DBG(fmt...) printk(KERN_ERR fmt)
@@ -978,7 +979,10 @@ static int __init early_init_dt_scan_memory(unsigned long node,
}
#endif
lmb_add(base, size);
+
+ memstart_addr = min((u64)memstart_addr, base);
}
+
return 0;
}
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 0205d40..9087e7a 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -431,7 +431,7 @@ void __init setup_system(void)
printk("htab_address = 0x%p\n", htab_address);
printk("htab_hash_mask = 0x%lx\n", htab_hash_mask);
#if PHYSICAL_START > 0
- printk("physical_start = 0x%x\n", PHYSICAL_START);
+ printk("physical_start = 0x%lx\n", PHYSICAL_START);
#endif
printk("-----------------------------------------------------\n");
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index ada249b..ce10e2b 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -202,7 +202,7 @@ adjust_total_lowmem(void)
cam_max_size = max_lowmem_size;
/* adjust lowmem size to max_lowmem_size */
- ram = min(max_lowmem_size, total_lowmem);
+ ram = min(max_lowmem_size, (phys_addr_t)total_lowmem);
/* Calculate CAM values */
__cam0 = 1UL << 2 * (__ilog2(ram) / 2);
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 47325f2..578750e 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -59,7 +59,10 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
unsigned long total_memory;
unsigned long total_lowmem;
-phys_addr_t memstart_addr;
+phys_addr_t memstart_addr = (phys_addr_t)~0ull;
+EXPORT_SYMBOL(memstart_addr);
+phys_addr_t kernstart_addr;
+EXPORT_SYMBOL(kernstart_addr);
phys_addr_t lowmem_end_addr;
int boot_mapsize;
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 9ea65d9..3be70ec 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -75,7 +75,8 @@
/* max amount of RAM to use */
unsigned long __max_memory;
-phys_addr_t memstart_addr;
+phys_addr_t memstart_addr = ~0;
+phys_addr_t kernstart_addr;
void free_initmem(void)
{
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 16def4d..0062e6b 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -216,7 +216,7 @@ void __init do_init_bootmem(void)
unsigned long total_pages;
int boot_mapsize;
- max_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
+ max_low_pfn = max_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
total_pages = (lmb_end_of_DRAM() - memstart_addr) >> PAGE_SHIFT;
#ifdef CONFIG_HIGHMEM
total_pages = total_lowmem >> PAGE_SHIFT;
@@ -232,7 +232,8 @@ void __init do_init_bootmem(void)
start = lmb_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE);
- boot_mapsize = init_bootmem(start >> PAGE_SHIFT, total_pages);
+ min_low_pfn = MEMORY_START >> PAGE_SHIFT;
+ boot_mapsize = init_bootmem_node(NODE_DATA(0), start >> PAGE_SHIFT, min_low_pfn, max_low_pfn);
/* Add active regions with valid PFNs */
for (i = 0; i < lmb.memory.cnt; i++) {
diff --git a/include/asm-powerpc/kdump.h b/include/asm-powerpc/kdump.h
index 10e8eb1..f6c93c7 100644
--- a/include/asm-powerpc/kdump.h
+++ b/include/asm-powerpc/kdump.h
@@ -11,16 +11,11 @@
#ifdef CONFIG_CRASH_DUMP
-#define PHYSICAL_START KDUMP_KERNELBASE
#define KDUMP_TRAMPOLINE_START 0x0100
#define KDUMP_TRAMPOLINE_END 0x3000
#define KDUMP_MIN_TCE_ENTRIES 2048
-#else /* !CONFIG_CRASH_DUMP */
-
-#define PHYSICAL_START 0x0
-
#endif /* CONFIG_CRASH_DUMP */
#ifndef __ASSEMBLY__
diff --git a/include/asm-powerpc/page.h b/include/asm-powerpc/page.h
index 6c85060..cffdf0e 100644
--- a/include/asm-powerpc/page.h
+++ b/include/asm-powerpc/page.h
@@ -12,6 +12,7 @@
#include <asm/asm-compat.h>
#include <asm/kdump.h>
+#include <asm/types.h>
/*
* On PPC32 page size is 4K. For PPC64 we support either 4K or 64K software
@@ -42,8 +43,23 @@
*
* The kdump dump kernel is one example where KERNELBASE != PAGE_OFFSET.
*
- * To get a physical address from a virtual one you subtract PAGE_OFFSET,
- * _not_ KERNELBASE.
+ * PAGE_OFFSET is the virtual address of the start of lowmem.
+ *
+ * PHYSICAL_START is the physical address of the start of the kernel.
+ *
+ * MEMORY_START is the physical address of the start of lowmem.
+ *
+ * KERNELBASE, PAGE_OFFSET, and PHYSICAL_START are all configurable on
+ * ppc32 and based on how they are set we determine MEMORY_START.
+ *
+ * For the linear mapping the following equation should be true:
+ * KERNELBASE - PAGE_OFFSET = PHYSICAL_START - MEMORY_START
+ *
+ * Also, KERNELBASE >= PAGE_OFFSET and PHYSICAL_START >= MEMORY_START
+ *
+ * There are two was to determine a physical address from a virtual one:
+ * va = pa + PAGE_OFFSET - MEMORY_START
+ * va = pa + KERNELBASE - PHYSICAL_START
*
* If you want to know something's offset from the start of the kernel you
* should subtract KERNELBASE.
@@ -51,20 +67,33 @@
* If you want to test if something's a kernel address, use is_kernel_addr().
*/
-#define PAGE_OFFSET ASM_CONST(CONFIG_KERNEL_START)
-#define KERNELBASE (PAGE_OFFSET + PHYSICAL_START)
-#define LOAD_OFFSET PAGE_OFFSET
+#define KERNELBASE ASM_CONST(CONFIG_KERNEL_START)
+#define PAGE_OFFSET ASM_CONST(CONFIG_PAGE_OFFSET)
+#define LOAD_OFFSET ASM_CONST((CONFIG_KERNEL_START-CONFIG_PHYSICAL_START))
+
+#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_FLATMEM)
+#ifndef __ASSEMBLY__
+extern phys_addr_t memstart_addr;
+extern phys_addr_t kernstart_addr;
+#endif
+#define PHYSICAL_START kernstart_addr
+#define MEMORY_START memstart_addr
+#else
+#define PHYSICAL_START ASM_CONST(CONFIG_PHYSICAL_START)
+#define MEMORY_START (PHYSICAL_START + PAGE_OFFSET - KERNELBASE)
+#endif
#ifdef CONFIG_FLATMEM
-#define pfn_valid(pfn) ((pfn) < max_mapnr)
+#define ARCH_PFN_OFFSET (MEMORY_START >> PAGE_SHIFT)
+#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < (ARCH_PFN_OFFSET + max_mapnr))
#endif
#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
-#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET))
-#define __pa(x) ((unsigned long)(x) - PAGE_OFFSET)
+#define __va(x) ((void *)((unsigned long)(x) - PHYSICAL_START + KERNELBASE))
+#define __pa(x) ((unsigned long)(x) + PHYSICAL_START - KERNELBASE)
/*
* Unfortunately the PLT is in the BSS in the PPC32 ELF ABI,
diff --git a/include/asm-powerpc/page_32.h b/include/asm-powerpc/page_32.h
index 51f8134..ebfae53 100644
--- a/include/asm-powerpc/page_32.h
+++ b/include/asm-powerpc/page_32.h
@@ -1,6 +1,12 @@
#ifndef _ASM_POWERPC_PAGE_32_H
#define _ASM_POWERPC_PAGE_32_H
+#if defined(CONFIG_PHYSICAL_ALIGN) && (CONFIG_PHYSICAL_START != 0)
+#if (CONFIG_PHYSICAL_START % CONFIG_PHYSICAL_ALIGN) != 0
+#error "CONFIG_PHYSICAL_START must be a multiple of CONFIG_PHYSICAL_ALIGN"
+#endif
+#endif
+
#define VM_DATA_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS32
#ifdef CONFIG_NOT_COHERENT_CACHE
--
1.5.4.1
More information about the Linuxppc-dev
mailing list