zImage.embedded

[Guillaume Dargaud]

[cross posting from one mailing list to another]

>>  is the file zImage.elf my proper network image ?
>
> What bootloader is on your board?  zImage.elf *might* be the proper
> image.  If you're using u-boot, then you want to build a uImage
> instead.

I'm trying to compile u-boot with buildroot, but it fails with:

                /usr/bin/make -j1 -C 
/home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc/genepy/u-boot-1.3.2 
\
                ""_config
make[1]: Entering directory 
`/home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc/genepy/u-boot-1.3.2'
make[1]: *** No rule to make target `_config'.  Stop.
make[1]: Leaving directory 
`/home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc/genepy/u-boot-1.3.2'
make: *** 
[/home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc/genepy/u-boot-1.3.2/.configured] 
Error 2

Apparently it expects a BOARD_NAME variable, but I don't know what to put in 
it (I looked at the makefile and can't find the ml405 referenced in there).
-- 
Guillaume Dargaud
http://www.gdargaud.net/