[PATCH 1/2] ibm_newemac: PowerPC 440GX EMAC PHY clock workaround

[Josh Boyer]

On Sat, 2008-04-12 at 16:28 -0400, Jeff Garzik wrote:
> Josh Boyer wrote:
> > On Fri, 28 Mar 2008 22:18:25 -0400
> > Jeff Garzik <jeff at garzik.org> wrote:
> > 
> >> Valentine Barshak wrote:
> >>> The PowerPC 440GX Taishan board fails to reset EMAC3 (reset timeout error)
> >>> if there's no link. Because of that it fails to find PHY chip. The older ibm_emac
> >>> driver had a workaround for that: the EMAC_CLK_INTERNAL/EMAC_CLK_EXTERNAL macros,
> >>> which toggle the Ethernet Clock Select bit in the SDR0_MFR register. This patch
> >>> does the same for "ibm,emac-440gx" compatible chips. The workaround forces
> >>> clock on -all- EMACs, so we select clock under global emac_phy_map_lock.
> >>>
> >>> Signed-off-by: Valentine Barshak <vbarshak at ru.mvista.com>
> >>> ---
> >>>  drivers/net/ibm_newemac/core.c |   16 +++++++++++++++-
> >>>  drivers/net/ibm_newemac/core.h |    8 ++++++--
> >>>  2 files changed, 21 insertions(+), 3 deletions(-)
> >> is this for 2.6.25-rc?
> > 
> > Jeff, can I get an ack from you on this patch, and patch 2 in this
> > set?  They depend on a patch in my tree and I'd like to include them in
> > my next push to Paul for 2.6.26.
> 
> ACK

Many thanks.

> I had queried the status of these patches, and didn't receive any reply 
> initially from my query...

Erm...  you did.

http://ozlabs.org/pipermail/linuxppc-dev/2008-March/053737.html

No worries though.  I lose email all the time.

josh