[PATCH RFC] tqm8560.dts: add local bus devices

[Wolfgang Grandegger]

Segher Boessenkool wrote:
>> +                        partition at 300000 {
>> +                                label = "fs";
>> +                                reg = <0x00300000 0x07c00000>;
>> +                        };
>> +                        partition at 7700000 {
>> +                                label = "firmware";
>> +                                reg = <0x07700000 0x00100000>;
> 
> These two overlap; should the latter be @7f00000?

Yes, of course.

> 
>> +        can at 2,0 {
>> +            device_type = "can";
> 
> No device_type please.

OK, but then I better use a more descriptive name for the compatible
property, e.g.:

	compatible = "can-i82527";	// Intel 82527 or Bosch CC770

> 
>> +        nand at 3,0 {
>> +            #address-cells = <1>;
>> +            #size-cells = <1>;
>> +            compatible = "fsl,mpc8560-fcm-nand",
>> +                         "fsl,elbc-fcm-nand";
>> +            reg = <0x3 0x0 0x8000>;
>> +
>> +            kernel at 0 {
>> +                                label = "kernel";
>> +                reg = <0x000000 0x0300000>;
>> +            };
>> +            fs at 300000 {
>> +                                label = "fs";
>> +                reg = <0x300000 0x7d00000>;
>> +            };
>> +        };
>> +    };
> 
> There should be a node that describes the nand chip between the nand
> controller node and the partition nodes.

I took the mpc8378_*.dts files of 2.6.25-rc8 as example and there is no
such node. Could you point me please to a more appropriate example.

> 
>> Do these entries make sense?
> 
> Looks good otherwise :-)

Thanks.

Wolfgang.