January 2008 Archives by thread
Starting: Tue Jan 1 03:10:06 EST 2008
Ending: Thu Jan 31 23:54:51 EST 2008
Messages: 2072
- [2.6.24 patch] Fix Cell OProfile support
Arnd Bergmann
- SCSI errors on powerpc with 2.6.24-rc6-mm1
FUJITA Tomonori
- Please pull powerpc.git merge branch
Arnd Bergmann
- [PATCH] [POWERPC] Update .gitignore files.
Jochen Friedrich
- [PATCH] [2.6.24] Add PPC nvram ioctls to compat_ioctl
Olof Johansson
- Fw:
rsa
- Fw: Funny :)
rsa
- [PATCH] powerpc: export copy_page() on 32bit
Joseph Fannin
- [PATCH] ASoC drivers for the Freescale MPC8610 SoC
Jon Smirl
- [PATCH 1/2] [POWERPC] smp_call_function_map should be static
Benjamin Herrenschmidt
- [PATCH] ASoC drivers for the Freescale MPC8610 SoC
Jon Smirl
- Using C67x00 on PXA255 with ov511
Grant Likely
- Please pull powerpc.git merge branch
Paul Mackerras
- [PATCH] [POWERPC] therm_pm72: suppress some compile warnings
Stephen Rothwell
- [PATCH v3 1/4] USB: add Cypress c67x00 low level interface code
Grant Likely
- [PATCH v3 2/4] USB: add Cypress c67x00 OTG controller core driver
Grant Likely
- How to creat a .config file for a driver and How to use it in a device driver?????
Misbah khan
- [PATCH] powerpc: Add MPC837x PCIE controller RC mode support
Li Li
- [PATCHv3] powerpc: DBox2 Board Support
David Gibson
- Enable RTC for Ebony and Walnut
David Gibson
- [PATCH] [POWERPC] Sequoia: typo in calling machine_device_initcall()
Grant Likely
- [PATCH/RFC] Add support for freescale watchdog to CPM serial driver.
Scott Wood
- [PATCH] mpc85xx_ads: add in missing of_node_put()
Paul Gortmaker
- [PATCH/RFC] powerpc: DBox2 Board Support
Scott Wood
- [PATCH] ASoC drivers for the Freescale MPC8610 SoC
Scott Wood
- [PATCH v2] ucc_uart: add support for Freescale QUICCEngine UART
Scott Wood
-
rsa
- [PATCH] [POWERPC] pasemi: Fix NMI handling check
Olof Johansson
- [PATCH 0/5] Make platform code use machine_*_initcall() macros
Grant Likely
- [PATCH 4/5] Convert PowerPC MPC i2c to of_platform_driver from platform_driver
Jochen Friedrich
- [PATCHv2] i2c: adds support for i2c bus on Frescale CPM1/CPM2 controllers
Jochen Friedrich
- [PATCH -mm] compat_binfmt_elf Kconfig
Roland McGrath
- [PATCH v4 02/13] [POWERPC] Add 'fsl, lpb' bus type for MPC5200 LocalPlus Bus
Grant Likely
- [PATCH] powerpc: #address-cells & #size-cells properties not inherited
Mark A. Greer
- [patch] powerpc systbl.h broken
Stephen Rothwell
- [PATCH] [POWERPC] arch/powerpc/kernel: use for_each_child_of_node
Stephen Rothwell
- [PATCH] [POWERPC] therm_windtunnel: eliminate some build warnings
Stephen Rothwell
- [PATCH] [POWERPC] therm_adt746x: eliminate some build warnings
Stephen Rothwell
- [PATCH] [POWERPC] Check that the syscall table matches the syscall numbers
Stephen Rothwell
- [PATCH] [POWERPC] Check that the syscall table matches the syscall
Milton Miller
- [DTC] small ftdump cleanup patch
Paul Gortmaker
- Book-E watchdog driver questions
Mike Nuss
- [PATCH] IB/ehca: Forward event client-reregister-required to registered clients
Hoang-Nam Nguyen
- [PATCh v3] powerpc: add hugepagesz boot-time parameter
Jon Tollefson
- [ofa-general] [PATCH] IB/ehca: Forward event client-reregister-required to registered clients
Roland Dreier
- [PATCH 2/3] (Resend part #1) Add the RapidIO support to powerpcarchitecture with memory mapping support.
Zhang Wei
- [PATCH] enable built-in networking for Sequoia defconfig
Hollis Blanchard
- [PATCH] i2c-ibm_iic driver
Sean MacLennan
- [patch 0/3] PS3 logical performance monitor patches for 2.6.25
Geoff Levand
- [patch 1/3] PS3: Add logical performance monitor repository routines
Geoff Levand
- [patch 2/3] PS3: Add logical performance monitor device support
Geoff Levand
- [patch 3/3] PS3: Add logical performance monitor driver support
Geoff Levand
- [PATCH] Base Taco Platform support
Sean MacLennan
- [PATCH] Hwmon for Taco
Sean MacLennan
- [PATCH] MTD for Taco
Sean MacLennan
- [PATCH] Miscellaneous for Taco
Sean MacLennan
- [PATCH v2] [POWERPC] Provide a way to protect 4k subpages when using 64k pages
Paul Mackerras
- [PATCH] Fix remainder calculating bug in single floating point division
Benjamin Herrenschmidt
- OProfile callgraph support not working correctly on PPC processors
Anton Blanchard
- [PATCH update -mm 16/43] powerpc user_regset compat
Roland McGrath
- How to write a device driver in such a fashion .????
Misbah khan
- [RFC] Add of_find_matching_node() helper function
Grant Likely
- [PATCH] [POWERPC] mpc5200: eliminate mpc52xx_*_map_*() functions.
Grant Likely
- [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC
Timur Tabi
- [RFC 0/2] mpc5200: eliminate direct manipulation of shared registers from SPI driver
Grant Likely
- [PATCH v5] qe: add ability to upload QE firmware
Timur Tabi
- [PATCH][POWERPC] Workaround for iommu page alignment
Benjamin Herrenschmidt
- [PATCH 1/3] sbc8548: Add basic support for Wind River SBC8548 as powerpc
Paul Gortmaker
- [PATCH 0/8] pseries: phyp dump: hypervisor-assisted dump
Manish Ahuja
- [PATCH 3/8] pseries: phyp dump: reserve-release proof-of-concept
Manish Ahuja
- How complete should the DTS be?
Sean MacLennan
- [PATCH/RFC] mpc83xx/85xx SysRQ/brk over 8250 console
Paul Gortmaker
- help
张自强
- [PATCH 3/4] mtd: Factor out OF partition support from the NOR driver.
Stefan Roese
- [PATCH 2/4] nand base: Give drivers a chance to do late initialization.
David Woodhouse
- [PATCH 3/4] mtd: Factor out OF partition support from the NOR driver.
David Woodhouse
- Generic MMC-over-SPI binding?
Simon Richter
- [PATCH v4 0/4] device_type/compatible cleanups
Anton Vorontsov
- [PATCH RFC 0/3] PowerPC: implement support for GPIO LIB API
Anton Vorontsov
- [PATCH for 2.6.24][NET] fs_enet: check for phydev existence in the ethtool handlers
Anton Vorontsov
- [PATCH] [POWERPC] Add of_find_matching_node() helper function
Grant Likely
- printk() does not work on UART1
mike zheng
- [PATCH V2] [POWERPC] Add common clock setting routine mpc52xx_psc_set_clkdiv()
Grant Likely
- Please pull linux-2.6-virtex.git
Grant Likely
- configuring macrowindow for x86 platform and creating a display window????
Misbah khan
- add phy-handle property for fec_mpc52xx
Olaf Hering
- add phy-handle property for fec_mpc52xx
Grant Likely
- [RFC] add phy-handle property for fec_mpc52xx
Grant Likely
- Linux for ml310
Grant Likely
- [PATCH] i2c-ibm_iic driver
Sean MacLennan
- [PATCH] ad7414 driver
Sean MacLennan
- [PATCH] [POWERPC] Fix handling of memreserve if the range lands in highmem
Kumar Gala
- [PATCH] Kconfig scsi_wait_scan
Sean MacLennan
- [PATCH v4 0/3] OF-platform PATA driver
Anton Vorontsov
- Help with device tree binding for SMC serial
Rune Torgersen
- Trying 10/HALF
Siva Prasad
- [PATCH 1/5] Warp Base Platform
Sean MacLennan
- [PATCH 2/3] sbc834x: Add device tree source for Wind River SBC834x board.
David Gibson
- [PATCH 4/7] sbc8560: Add device tree source for Wind River SBC8560 board
David Gibson
- [PATCH V3] [POWERPC] Add common clock setting routine mpc52xx_psc_set_clkdiv()
Grant Likely
- [PATCH] Fix CPU hotplug when using the SLB shadow buffer
Michael Neuling
- [PATCH v2] Fix handling of memreserve if the range lands in highmem
Kumar Gala
- [PATCH 0/5] Version 17, series to add device tree naming to i2c
Jon Smirl
- Platform matching style (was:: [RFC] add phy-handle property for fec_mpc52xx)
Grant Likely
- [PATCH 1/3] [NET] phy/fixed.c: rework to not duplicate PHY layerfunctionality
Anton Vorontsov
- Please pull linux-2.6-mpc52xx for-2.6.24
Grant Likely
- ibm4xx_quiesce_eth?
Sean MacLennan
- Enable RTC for Ebony and Walnut (v2)
David Gibson
- libfdt: Add fdt_set_name() function
David Gibson
- [PATCH] ps3: vuart: semaphore to mutex
Daniel Walker
- [PATCH 0/3] UCC TDM driver for MPC83xx platforms
Aggrwal Poonam
- [i2c] [PATCH 0/5] Version 17, series to add device tree naming to i2c
Jean Delvare
- [PATCH, ppc64] improve dedotify()
Jan Beulich
- [PATCH 0/2] ps3fb fixes for 2.6.24
Geert Uytterhoeven
- [PATCH 0/2] [PPC 4xx] L2-cache synchronization for ppc44x
Yuri Tikhonov
- RFC: Only deal with apple fix if res is memory
Kumar Gala
- Device Tree & PCI
Rune Torgersen
- [i2c] [PATCH 1/5] Implement module aliasing for i2c to translate from device tree names
Jean Delvare
- [PATCH 1/3] 8xx: Analogue & Micro Adder875 board support.
Scott Wood
- [PATCH 2/3] mpc82xx: Embedded Planet EP8248E support
Scott Wood
- [PATCH 3/3] Update .gitignore for dtc.
Scott Wood
- [PATCH] fsl_soc: Fix get_immrbase() to use ranges, rather than reg.
Scott Wood
- [PATCH 1/3] nand base: Don't panic if a controller driver does ecc its own way.
Scott Wood
- [PATCH 2/3] mtd: Factor out OF partition support from the NOR driver.
Scott Wood
- [PATCH 3/3] Freescale enhanced Local Bus Controller FCM NAND support.
Scott Wood
- Quick Engine Support on Kernel 2.4
mike zheng
- Please pull powerpc.git merge branch
Paul Mackerras
- [PATCH 19 0/5] Version 18, series to add device tree naming to i2c
Jon Smirl
- [PATCH 19 1/5] Implement module aliasing for i2c to translate from device tree names
Jon Smirl
- [PATCH 19 2/5] Modify several rtc drivers to use the alias names list property of i2c
Jon Smirl
- [PATCH 19 3/5] Clean up error returns
Jon Smirl
- [PATCH 19 4/5] Convert PowerPC MPC i2c to of_platform_driver from platform_driver
Jon Smirl
- [i2c] [PATCH] update module-init-tools to support the i2c subsystem
Jean Delvare
- [PATCH 3/3] Freescale enhanced Local Bus Controller FCM NAND support.
Stephen Rothwell
- [PATCH 2/3] mtd: Factor out OF partition support from the NOR driver.
Stephen Rothwell
- [PATCH] [POWERPC] make ibmebus use of_(un)register_driver
Stephen Rothwell
- [PATCH 1/4] powerpc: mv64x60 - Use early_* PCI accessors for hotswap reg
Mark A. Greer
- [PATCH] [POWERPC] Ensure we only handle PowerMac PCI bus fixup for memory resources
Kumar Gala
- [PATCH] [POWERPC] Fixup transparent P2P resources
Kumar Gala
- [PATCH] [POWERPC] FSL: Rework PCI/PCIe support for 85xx/86xx
Kumar Gala
- [PATCH] [POWERPC] Remove update_bridge_resource
Kumar Gala
- [PATCH] [POWERPC] Fixup use of phys_addr_t in mpic code
Kumar Gala
- emac/zmii link warnings
Sean MacLennan
- Please pull powerpc.git merge branch
Paul Mackerras
- psc and spi
S. Fricke
- crash in kmem_cache_init
Olaf Hering
- [PATCH] [POWERPC] bootwrapper: Add find_node_by_alias and dt_fixup_mac_address_by_alias
Kumar Gala
- [PATCH] [POWERPC] bootwrapper: convert cuboot-8{3,5}xx to dt_fixup_mac_address_by_alias
Kumar Gala
- [PATCH] [POWERPC] 85xx: convert boards to use machine_device_initcall
Kumar Gala
- [PATCH] [POWERPC] 83xx: convert boards to use machine_device_initcall
Kumar Gala
- Please pull pasemi.git for-2.6.25 branch
Olof Johansson
- [PATCH] change where the kernel loads
Mike Wolf
- [PATCH 1/2] 8xx: Analogue & Micro Adder875 board support.
Scott Wood
- [PATCH 2/2] mpc82xx: Embedded Planet EP8248E support
Scott Wood
- [PATCH 1/2] mtd: Factor out OF partition support from the NOR driver.
Scott Wood
- [PATCH 2/2] Freescale enhanced Local Bus Controller FCM NAND support.
Scott Wood
- [libfdt] RFC: Node iterators
David Gibson
- ppc: 4xx: sysctl table check failed: /kernel/l2cr .1.31 Missing strategy
Stefan Roese
- Please pull from 'for-2.6.25' branch of 4xx tree
Josh Boyer
- Fixed phy
Rune Torgersen
- Patches added to master/for-2.6.25 branch of powerpc.git
Paul Mackerras
- [PATCH 0/2] Add crashdump shutdown hooks
Michael Neuling
- [BUILD FAILURE] 2.6.24-rc8-git1 Kernel Build Failure on power box
Kamalesh Babulal
- [PATCH/RFC] [POWERPC] CPM1: implement GPIO LIB API
Jochen Friedrich
- [PATCH/RFCv2] [POWERPC] Add support for freescale watchdog to CPM serial driver.
Jochen Friedrich
- [PATCH/RFCv2] wdt: Add support for PowerQUICC watchdog
Jochen Friedrich
- [PATCH 0/4] IB/ehca: fixes, port connectivity autodetection, problem workaround
Joachim Fenkes
- [PATCH] [POWERPC] Update TQM5200, CM5200 and Motion-PRO _defconfig and .dts files
Marian Balakowicz
- [patch 06/18] PS3: Fix kexec storage probe
Geert Uytterhoeven
- [PATCH v2] [POWERPC] Update TQM5200, CM5200 and Motion-PRO .dts files
Marian Balakowicz
- [PATCH v2] [POWERPC] Update TQM5200, CM5200 and Motion-PRO _defconfig files
Marian Balakowicz
- [PATCH v5] [POWERPC] Add LED driver for Promess Motion-PRO board.
Marian Balakowicz
- 2.6.24-rc8-mm1: powerpc: include/asm/nvram.h:62: error: field 'partition' has incomplete type
Mariusz Kozlowski
- 2.6.24-rc8-mm1 powerpc build errors
Olof Johansson
- Warp Watchdog
Sean MacLennan
- Problems with PCI on 8280
Rune Torgersen
- 2.6.24-rc8-mm1: powerpc oopses
Mariusz Kozlowski
- L3CR
linuxppcdev at lists.qbjnet.com
- [PATCH 1/2] 8xx: Analogue & Micro Adder875 board support.
Scott Wood
- [PATCH 2/2] mpc82xx: Embedded Planet EP8248E support
Scott Wood
- [PATCH 1/3] mpc8313erdb: Add NAND to device tree, and call of_platform_bus_probe().
Scott Wood
- [PATCH 2/3] mpc8313erdb: Add NOR flash to the device tree.
Scott Wood
- [PATCH 3/3] Update mpc8313erdb defconfig for MTD, NAND, JFFS2.
Scott Wood
- [PATCH] [POWERPC] Fix a couple of copyright symbols
Stephen Rothwell
- [PATCH] [POWERPC] Fix incorrect interrupt map on FSL reference boards
Kumar Gala
- [PATCH] Fake NUMA emulation for PowerPC (Take 2)
Michael Ellerman
- [PATCH] Fake NUMA emulation for PowerPC (Take 2)
Michael Ellerman
- [PATCH 1/3] [NET] phy/fixed.c: rework to not duplicate PHY layer functionality
Kumar Gala
- [PATCH 3/3] [POWERPC] MPC8349E-mITX: Vitesse 7385 PHY is not connected to the MDIO bus
Kumar Gala
- [PATCH 2/3] [POWERPC] fsl_soc: add support for gianfar for fixed-link property
Kumar Gala
- 2.6.24-rc8-mm1 build failure on headers_check
Kamalesh Babulal
- 2.6.24-rc8-mm1 Kernel oops will running kernbench
Kamalesh Babulal
- [PATCH] add modalias info to mv643xx_eth.ko
Olaf Hering
- [PATCH 0/3] UCC TDM driver for MPC83xx platforms
Aggrwal Poonam
- ppc32: Weird process scheduling behaviour with 2.6.24-rc
Michel Dänzer
- [PATCH 0/7] [POWERPC] 8xx cleanups
Jochen Friedrich
- [PATCH 1/7] [POWERPC] Remove unused m8xx_cpm_hostalloc/free/dump()
Jochen Friedrich
- [PATCH 2/7] [POWERPC] Rename m8xx_pic_init to mpc8xx_pics_init
Jochen Friedrich
- [PATCH 3/7] [POWERPC] Remove unneeded and misspelled prototype m8xx_calibrate_decr
Jochen Friedrich
- [PATCH 4/7] [POWERPC] Remove declaration of m8xx_pic_init.
Jochen Friedrich
- [PATCH 5/7] [POWERPC] Remove sysdev/commproc.h
Jochen Friedrich
- [PATCH 6/7] [POWERPC] Get rid of conditional includes of board specific setup
Jochen Friedrich
- [PATCH 7/7] [POWERPC] Rename commproc to cpm1 and cpm2_common.c to cpm2.c
Jochen Friedrich
- [RFC/PATCH 0/2] mpc5200: tidy up the device tree bindings
Grant Likely
- [PATCH/RFCv2] [POWERPC] Add support for freescale watchdog to CPM serial driver.
Jochen Friedrich
- l2cr missing from /proc
Bob Brose
- [patch 00/16] PS3 patch collection for 2.6.25
Geoff Levand
- [patch 01/16] POWERPC: Add Cell SPRN bookmark register
Geoff Levand
- [patch 02/16] PS3: Make bus_id and dev_id u64
Geoff Levand
- [patch 03/16] PS3: Add ps3_repository_find_device_by_id()
Geoff Levand
- [patch 04/16] PS3: Use the HVs storage device notification mechanism properly
Geoff Levand
- [patch 05/16] PS3: Add repository polling loop to work around timing bug
Geoff Levand
- [patch 06/16] PS3: Kill unused ps3_repository_bump_device()
Geoff Levand
- [patch 07/16] PS3: Refactor ps3_repository_find_device()
Geoff Levand
- [patch 08/16] PS3: Checkpatch cleanups for drivers/ps3/ps3-sys-manager.c
Geoff Levand
- [patch 09/16] PS3: Checkpatch cleanups for drivers/ps3/ps3-vuart.c
Geoff Levand
- [patch 10/16] PS3: Checkpatch cleanups for arch/powerpc/platforms/ps3/repository.c
Geoff Levand
- [patch 11/16] PS3: Add logical performance monitor repository routines
Geoff Levand
- [patch 12/16] PS3: Add logical performance monitor device support
Geoff Levand
- [patch 13/16] PS3: Add logical performance monitor driver support
Geoff Levand
- [patch 14/16] PS3: Vuart change semaphore to mutex
Geoff Levand
- [patch 15/16] PS3: Revove use lpar address workaround
Geoff Levand
- [patch 16/16] PS3: Update ps3_defconfig
Geoff Levand
- External audio clock with MPC5200B
Jon Smirl
- [PATCH/RFCv3] [POWERPC] Add support for freescale watchdog to CPM serial driver.
Jochen Friedrich
- [PATCH/RFC] [POWERPC] Allow multiple images to be built when CONFIG_DEFAULT_UIMAGE set
Grant Likely
- [PATCH] [POWERPC] Always hookup PHB IO resource even when empty
Benjamin Herrenschmidt
- [PATCH 1/7] Set archdata.dma_data for direct DMA in cell_dma_dev_setup()
Michael Ellerman
- [PATCH] Make IOMMU code safe for > 132 GB of memory
Michael Ellerman
- [MPC5200] problem running FEC and ATA
Mehlan, Markus (Ritter Elektronik)
- [PATCH] revert chrp_pci_fixup_vt8231_ata devinit to fix libata on pegasos
Olaf Hering
- [PATCH 0/3] i2c: Use the standard, alias-based device/driver matching scheme
Jean Delvare
- [patch v4 0/4] Cypress c67x00 (EZ-Host/EZ-OTG) support
Peter Korsgaard
- [patch v4 3/4] USB: add Cypress c67x00 OTG controller HCD driver
Peter Korsgaard
- [i2c] [PATCH 0/3] i2c: Use the standard, alias-based device/driver matching scheme
Jean Delvare
- [PATCH] autodetect serial console on efika
Olaf Hering
- [PATCH 05/10] powerpc: Add crash kernel support for 85xx
Kumar Gala
- Please pull from 'for-2.6.25' branch
Kumar Gala
- patches for 2.6.25
Kumar Gala
- [PATCH} PIKA FPGA WDT driver
Sean MacLennan
- [PATCH 1/2] [POWERPC] 8xx: Use machine_*_initcall() hooks in platform code
Grant Likely
- [PATCH 2/2] [POWERPC] 8xxx and embedded6xx: Use machine_*_initcall() hooks in platform code
Grant Likely
- [PATCH] mpc i2c driver, compare to NO_IRQ instead of zero
Jon Smirl
- [PATCH] Convert pfc8563 i2c driver from old style to new style
Jon Smirl
- [PATCH] Various new ibm405 DCRN #defines
Joshua Williams
- [PATCH] create modalias file in sysfs for bus vio
Olaf Hering
- [PATCH 1/4] Search for and publish cell OF platform devices earlier
Michael Ellerman
- [PATCH] create modalias file in sysfs for bus of_platform
Olaf Hering
- [PATCH 1/2] Add flash node to mpc8641_hpcn.dts
Wade Farnsworth
- [PATCH 2/2] MPC8641 HPCN: publish all soc and flash devices
Wade Farnsworth
- [PATCH] [POWERPC] mpc52xx: clean up Kconfig
Grant Likely
- [PATCH] adder875: Fix flash bus-width and remove duplicate __initdata.
Scott Wood
- [PATCH 0/8] pseries: phyp dump: hypervisor-assisted dump
Manish Ahuja
- [PATCH 0/8] pseries: phyp dump: hypervisor-assisted dump
Manish Ahuja
- [PATCH] [POWERPC]: constify function pointer tables
Jan Engelhardt
- [PATCH 0/6] PS3: gelic: gelic updates for 2.6.25
John W. Linville
- [PATCH] [POWERPC] Add docs for Freescale DMA & DMA channel device tree nodes
Kumar Gala
- [PATCH] [POWERPC] Add docs for Freescale PowerQUICC SATA device tree nodes
Kumar Gala
- crash in kmem_cache_init
Christoph Lameter
- [PATCH] ppc: fix #ifdef-s in mediabay driver
Bartlomiej Zolnierkiewicz
- [PATCH 1/3] Rename i2c-mpc to i2c-mpc-drv in preparation for breaking out common code.
Jon Smirl
- [PATCH 2/3] Convert PowerPC MPC i2c to of_platform_driver from platform_driver
Jon Smirl
- [PATCH POWERPC] i2c: adds support for i2c bus on Frescale CPM1/CPM2 controllers
Jean Delvare
- [PATCH v6] [POWERPC] Add LED driver for Promess Motion-PRO board.
Marian Balakowicz
- [PATCH] [RAPIDIO] Fix compile error and warning
Kumar Gala
- [PATCH] [POWERPC] Move RapidIO support code from arch/ppc
Kumar Gala
- [PATCH] [POWERPC] Fix compile error if CONFIG_STX_GP3 is defined
Kumar Gala
- [PATCHv2 0/8] [POWERPC] 8xx cleanups
Jochen Friedrich
- [PATCHv2 1/8] [POWERPC] Remove unused m8xx_cpm_hostalloc/free/dump()
Jochen Friedrich
- [PATCHv2 2/8] [POWERPC] Rename m8xx_pic_init to mpc8xx_pics_init
Jochen Friedrich
- [PATCHv2 3/8] [POWERPC] Remove unneeded and misspelled prototype m8xx_calibrate_decr
Jochen Friedrich
- [PATCHv2 4/8] [POWERPC] Remove declaration of m8xx_pic_init.
Jochen Friedrich
- [PATCHv2 5/8] [POWERPC] Remove sysdev/commproc.h
Jochen Friedrich
- [PATCHv2 6/8] [POWERPC] Get rid of conditional includes of board specific setup
Jochen Friedrich
- [PATCHv2 7/8] [POWERPC] Rename commproc to cpm1 and cpm2_common.c to cpm2.c
Jochen Friedrich
- [PATCHv2 8/8] [POWERPC] Move definition of buffer descriptor to cpm.h
Jochen Friedrich
- Section mismatch warnings om powerpc defconfig build:wq
Sam Ravnborg
- mpc8568e-mds: pci-e is broken
Anton Vorontsov
- [PATCH] [POWERPC] MPC8360E-RDK: device tree, board file and defconfig
Anton Vorontsov
- [PATCH][ppc] logical/bitand typo in powerpc/boot/4xx.c
Roel Kluin
- [PATCH] [POWERPC] Add fixed-phy support for fs_enet
Kumar Gala
- Please pull from 'for-2.6.25' branch
Kumar Gala
- [PATCH UCC TDM 0/3] UCC based TDM driver for QE based MPC83xx platforms
Aggrwal Poonam
- [PATCH] UCC TDM driver for QE based MPC83xx platforms.
Poonam_Aggrwal-b10812
- [PATCH 2/3] Platform changes for UCC TDM driver for MPC8323ERDB.Also includes related QE changes and dts entries.
Poonam_Aggrwal-b10812
- [PATCH UCC TDM 3/3 ] Modified Documentation to explain dts entries for TDM driver
Poonam_Aggrwal-b10812
- [PATCH 6/6 v2] PS3: gelic: Add support for dual network interface
Masakazu Mokuno
- [PATCH] [POWERPC] Always build setup-bus.c on powerpc
Kumar Gala
- [PATCH] [POWERPC] 85xx: Port STX GP3 board over from arch/ppc
Kumar Gala
- [PATCH] sysctl: Kill binary sysctl KERN_PPC_L2CR
Eric W. Biederman
- [PATCH UCC TDM 1/3 Updated] Platform changes for UCC TDM driver for MPC8323eRDB. Also includes related QE changes and dts entries.
Poonam_Aggrwal-b10812
- [PATCH UCC TDM 2/3 ]Updated: UCC TDM driver for QE based MPC83xx platforms.
Poonam_Aggrwal-b10812
- Reboot at insmod of cf card driver
Lehmann, Hans (Ritter Elektronik)
- [patch v5 0/4] Cypress c67x00 (EZ-Host/EZ-OTG) support
Peter Korsgaard
- [patch v5 2/4] USB: add Cypress c67x00 OTG controller core driver
Peter Korsgaard
- [PATCHv3 0/7] [POWERPC] 8xx cleanups
Jochen Friedrich
- [PATCHv3 1/7] [POWERPC] Remove unused m8xx_cpm_hostalloc/free/dump()
Jochen Friedrich
- [PATCHv3 2/7] [POWERPC] Rename m8xx_pic_init to mpc8xx_pics_init
Jochen Friedrich
- [PATCHv3 3/7] [POWERPC] Remove unneeded and misspelled prototype m8xx_calibrate_decr
Jochen Friedrich
- [PATCHv3 4/7] [POWERPC] Remove sysdev/commproc.h
Jochen Friedrich
- [PATCH v5 0/5] device_type/compatible cleanups
Anton Vorontsov
- [PATCHv3 5/7] [POWERPC] Get rid of conditional includes of board specific setup
Jochen Friedrich
- [PATCHv3 6/7] [POWERPC] Rename commproc to cpm1 and cpm2_common.c to cpm2.c
Jochen Friedrich
- [PATCHv3 7/7] [POWERPC] Move definition of buffer descriptor to cpm.h
Jochen Friedrich
- [PATCH] IB/ehca: Prevent sending UD packets to QP0
Joachim Fenkes
- [PATCH UCC TDM 1/3 Updated] Platform changes for UCC TDM driver for MPC8323eRDB. Also includes related QE changes and dts entries.
Anton Vorontsov
- [PATCH] [POWERPC] Add a cuboot wrapper for 85xx w/CPM2
Kumar Gala
- [PATCH 1/9] powerpc: fold the mpc8313 platform into the mpc831x platform
Kim Phillips
- [PATCH 2/9] powerpc: add base platform support for the mpc8315 rdb board
Kim Phillips
- [PATCH 3/9] powerpc: Add the MPC8315E RDB dts
Kim Phillips
- [PATCH 4/9] enable FSL SATA driver config for Freescale SoCs
Kim Phillips
- [PATCH 5/9] powerpc: ipic: add interrupt vector 94
Kim Phillips
- [PATCH 6/9] add the mpc8315 rdb defconfig
Kim Phillips
- [PATCH 7/9] powerpc: add MPC837x RDB platform support
Kim Phillips
- [PATCH 8/9] powerpc: add the mpc837[789]_rdb dts files
Kim Phillips
- [PATCH 9/9] powerpc: add the mpc837x rdb defconfig
Kim Phillips
- [PATCH] [POWERPC] bootwrapper: Add find_node_by_compatible
Kumar Gala
- [PATCH v3] [POWERPC] Add a cuboot wrapper for 85xx with CPM2
Kumar Gala
- [PATCH v2] [POWERPC] 85xx: Port STX GP3 board over from arch/ppc
Kumar Gala
- [PATCH] [POWERPC] 82xx and embedded6xx: Use machine_*_initcall() hooks in platform code
Grant Likely
- [PATCH 1/4] Search for and publish cell OF platform devices earlier
Michael Ellerman
- [PATCH] [POWERPC] 85xx: Port TQM85xx boards over from arch/ppc
Kumar Gala
- what's in my tree for 2.6.25
Kumar Gala
- [PATCH 1/3] Add set_dma_ops() to match get_dma_ops().
Michael Ellerman
- [PATCH 2/3] Allocate the hash table under 1G on cell
Michael Ellerman
- [PATCH for-2.6.25] [POWERPC] Rename commproc to cpm1 and cpm2_common.c to cpm2.c
Jochen Friedrich
- [PATCH] [NET]: Remove PowerPC code from fec.c
Jochen Friedrich
- [patch 00/11] ps3av/3fb patches for 2.6.25
Geert Uytterhoeven
- [PATCH] [NET]: Remove PowerPC code from fec.c
Jochen Friedrich
- [RFC][PATCH] remove section mappinng
Badari Pulavarty
- [PATCH] [POWERPC] 85xx: some minor cleanups for stx_gp3 and tqm85xx
Kumar Gala
- [PATCHv3 2.6.25] i2c: adds support for i2c bus on Freescale CPM1/CPM2 controllers
Jochen Friedrich
- [PATCH 5/5] [POWERPC] fsl_soc, legacy_serial: add support for "soc" compatible matching
Anton Vorontsov
- [PATCH 7/9] powerpc: add MPC837x RDB platform support
Kim Phillips
- [PATCH] hide kernel only code in asm-powerpc/elf.h
Olaf Hering
- [PATCH 5/5] [POWERPC] fsl_soc, legacy_serial: add support for "soc" compatible matching
Scott Wood
- [PATCH 5/5] [POWERPC] fsl_soc, legacy_serial: add support for "soc" compatible matching
Anton Vorontsov
- [PATCH 0/2] IB/ehca: PMA support and a minor fix
Joachim Fenkes
- Please pull 'for-2.6.25' branch of 4xx tree
Josh Boyer
- [PATCH] POWERPC: Convert all 86xx DTS files to /dts-v1/ format.
Jon Loeliger
- [PATCH] POWERPC: Convert StorCenter DTS file to /dts-v1/ format.
Jon Loeliger
- drivers/char/hvc_* and /Documentation/powerpc/hvcs.txt
Timur Tabi
- [PATCH 063/196] kset: convert /sys/devices to use kset_create
Olof Johansson
- Please pull for-2.6.25 branch of pasemi.git
Olof Johansson
- ppc32: Weird process scheduling behaviour with 2.6.24-rc
Benjamin Herrenschmidt
- ppc32: Weird process scheduling behaviour with 2.6.24-rc
Benjamin Herrenschmidt
- [PATCH]warp.c
Sean MacLennan
- i2c-ibm_iic.c fix
Sean MacLennan
- xsysace.c oops on restart
Grant Likely
- Patches added to for-2.6.25/master branches of powerpc.git
Paul Mackerras
- [PATCH] FIXED_MII_100_FDX
Sean MacLennan
- [PATCH] windfarm: add PowerMac 12,1 support
Étienne Bersac
- [BUILD FAILURE]2.6.24-git{1,2} kernel powerpc linkage failure
Kamalesh Babulal
- Reminder: removal of arch/ppc
Josh Boyer
- [PATCH] Fix powerpc vio_find_name to not use devices_subsys
Paul Mackerras
- [ppc] Disparity between sys_clock_getres and vdso implementation
Sripathi Kodi
- PATCH[1/1] 8xx: Add clock-frequency to .dts brg entries
Bryan O'Donoghue
- [PATCH 1/9] qe/muram dts: Explicitly set address-cells and size cells for muram
Paul Gortmaker
- [PATCH 2/9] mpc834x_mds: Convert device tree source to dts-v1
Paul Gortmaker
- [PATCH 1/1][PPC] replace logical- by bit-and in pci_process_ISA_OF_ranges(), arch/powerpc/kernel/isa-bridge.c
Roel Kluin
- request_irq() for external interrupt pin on MPC875 (A&M adder MPC 875)
Rognlien Dag Kristian
- [PATCH 1/1][PPC] Test value, not 1 in print_insn_spu(), arch/powerpc/xmon/spu-dis.c
Roel Kluin
- [PATCH] [PPC] Remove 83xx from arch/ppc
Kumar Gala
- [PATCH 0/3] Implement device tree based i2c module loading on mpc5200 powerpc
Jon Smirl
- [PATCH 2/3] Convert PowerPC MPC i2c to of_platform_driver from platform_driver
Jon Smirl
- [PATCH 3/3] Add device tree compatible aliases to i2c drivers
Jon Smirl
- [PATCH] [PPC] Remove 85xx from arch/ppc
Kumar Gala
- Please pull from 'for-2.6.25' branch
Kumar Gala
- [PATCH] [POWERPC] 86xx: Remove unused IRQ defines
Kumar Gala
- [PATCH] [POWERPC] 85xx: rework platform Kconfig
Kumar Gala
- [PATCH] Convert PowerPC MPC i2c to of_platform_driver from platform_driver
Jon Smirl
- [PATCH] [POWERPC] 83xx: rework platform Kconfig
Kumar Gala
- [PATCH] [POWERPC] 85xx: convert sbc85* boards to use machine_device_initcall
Kumar Gala
- [PATCH] powerpc: fix typo in mpc837x compatible entries
Kim Phillips
- [PATCH] [POWERPC] 85xx: Only invalidate TLB0 and TLB1
Kumar Gala
- Please pull from 'for-2.6.25' branch (updated)
Kumar Gala
- [-mm PATCH] updates for hotplug memory remove
Badari Pulavarty
- [PATCH 0/3] 82xx: MGCOGE support
Heiko Schocher
- [PATCH 1/4] 82xx: MGCOGE support
Heiko Schocher
- [PATCH 2/4] 82xx: MGCOGE support
Heiko Schocher
- [PATCH 3/4] 82xx: MGCOGE support
Heiko Schocher
- [PATCH 4/4] 82xx: MGCOGE support
Heiko Schocher
- [patch v6 0/4] Cypress c67x00 (EZ-Host/EZ-OTG) support
Peter Korsgaard
- [patch v6 1/4] USB: add Cypress c67x00 low level interface code
Peter Korsgaard
- [patch v6 3/4] USB: add Cypress c67x00 OTG controller HCD driver
Peter Korsgaard
- [patch v6 4/4] USB: add Cypress c67x00 OTG controller gadget driver
Peter Korsgaard
- [PATCH 1/8] Add set_dma_ops() to match get_dma_ops().
Michael Ellerman
- PCI configuration with multiple PCI controllers
Laurent Lagrange
- ppc64 vecemu compile failure
maximilian attems
- [PATCH 0/6] PS3: gelic: gelic updates for 2.6.25
Masakazu Mokuno
- External Interrupt
Marco Stornelli
- [PATCH][drivers/net/fec_mpc52xx.c] duplicate NETIF_MSG_IFDOWN in MPC52xx_MESSAGES_DEFAULT
Roel Kluin
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Geert Uytterhoeven
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Mike Travis
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Ingo Molnar
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Luck, Tony
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Ingo Molnar
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Mike Travis
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Luck, Tony
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Mike Travis
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Ingo Molnar
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Ingo Molnar
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Luck, Tony
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Olof Johansson
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Ingo Molnar
- [powerpc changes] Re: x86/non-x86: percpu, node ids, apic ids x86.git fixup
Ingo Molnar
- [powerpc changes] Re: x86/non-x86: percpu, node ids, apic ids x86.git fixup
Olof Johansson
- [powerpc changes] Re: x86/non-x86: percpu, node ids, apic ids x86.git fixup
Geoff Levand
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Geoff Levand
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Mike Travis
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Ingo Molnar
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Luck, Tony
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Ingo Molnar
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Ingo Molnar
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Luck, Tony
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Ingo Molnar
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Luck, Tony
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Ingo Molnar
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Luck, Tony
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Ingo Molnar
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Luck, Tony
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Ingo Molnar
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Adrian Bunk
- x86/non-x86: percpu, node ids, apic ids x86.git fixup
Olof Johansson
- [BUILD FAILURE] 2.6.24-git7 section type conflict at various drivers on powerpc
Kamalesh Babulal
- [PATCH] powerpc: configure USB clock for MPC8315E
Kim Phillips
- [PATCH v2] powerpc: configure USB clock for MPC8315E
Kim Phillips
- [PATCH 1/6] modules: Fold percpu_modcopy into module.c linux-2.6.git
travis at sgi.com
- [PATCH 2/6] percpu: Change Kconfig to HAVE_SETUP_PER_CPU_AREA linux-2.6.git
travis at sgi.com
- [PATCH v3] powerpc: configure USB clock for MPC8315E
Kim Phillips
- ndfc ecc byte order
Sean MacLennan
- [2.6 patch] powerpc: vdso_do_func_patch{32,64}() must be __init
Adrian Bunk
- [2.6 patch] powerpc: free_property() mustn't be __init
Adrian Bunk
- [2.6 patch] hvc_rtas_init() must be __init
Adrian Bunk
- PATCH[1/1] 8xx: Add clock-frequency to Adder875 and mpc885ads board ports
Bryan O'Donoghue
- [RFC] [POWERPC] bootwrapper: build multiple cuImages
Grant Likely
- Please pull powerpc.git for-2.6.25 branch
Paul Mackerras
- build error with kdump shutdown hook support
Geoff Levand
- [PATCHv4 2.6.25] i2c: adds support for i2c bus on Freescale CPM1/CPM2 controllers
Jochen Friedrich
- [PATCH/RFC] [POWERPC] Add i2c pins to dts and board setup
Jochen Friedrich
Last message date:
Thu Jan 31 23:54:51 EST 2008
Archived on: Fri Jun 5 17:13:44 EST 2009
This archive was generated by
Pipermail 0.09 (Mailman edition).