[PATCH 1/4 v2] powerpc: mv64x60 - Use early_* PCI accessors for hotswap reg
Mark A. Greer
mgreer at mvista.com
Thu Jan 17 09:00:05 EST 2008
From: Mark A. Greer <mgreer at mvista.com>
The mv64x60 Hotswap register is on the first hose of the mv64x60
hostbridge. To access it, manually find the hose structure and
use the early_* PCI accessor routines because the hostbridge is
normally hidden.
Signed-off-by: Mark A. Greer <mgreer at mvista.com>
---
This patch should address all of Stephen's comments.
arch/powerpc/sysdev/mv64x60.h | 4 ++
arch/powerpc/sysdev/mv64x60_pci.c | 46 +++++++++++++++++++++-------
2 files changed, 39 insertions(+), 11 deletions(-)
diff --git a/arch/powerpc/sysdev/mv64x60.h b/arch/powerpc/sysdev/mv64x60.h
index 4f618fa..51c4293 100644
--- a/arch/powerpc/sysdev/mv64x60.h
+++ b/arch/powerpc/sysdev/mv64x60.h
@@ -2,11 +2,15 @@
#define __MV64X60_H__
#include <linux/init.h>
+#include <linux/of.h>
+
+#include <asm/pci-bridge.h>
extern void __init mv64x60_init_irq(void);
extern unsigned int mv64x60_get_irq(void);
extern void __init mv64x60_pci_init(void);
extern void __init mv64x60_init_early(void);
+extern struct pci_controller *mv64x60_find_hose(u32 idx);
#endif /* __MV64X60_H__ */
diff --git a/arch/powerpc/sysdev/mv64x60_pci.c b/arch/powerpc/sysdev/mv64x60_pci.c
index 1456015..1e6f186 100644
--- a/arch/powerpc/sysdev/mv64x60_pci.c
+++ b/arch/powerpc/sysdev/mv64x60_pci.c
@@ -13,10 +13,12 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/of.h>
-#include <asm/prom.h>
#include <asm/pci-bridge.h>
+#include <sysdev/mv64x60.h>
+
#define PCI_HEADER_TYPE_INVALID 0x7f /* Invalid PCI header type */
#ifdef CONFIG_SYSFS
@@ -24,11 +26,31 @@
#define MV64X60_VAL_LEN_MAX 11
#define MV64X60_PCICFG_CPCI_HOTSWAP 0x68
+struct pci_controller *mv64x60_find_hose(u32 idx)
+{
+ struct device_node *phb;
+ struct pci_controller *hose;
+ const u32 *prop;
+ int len;
+
+ for_each_compatible_node(phb, "pci", "marvell,mv64360-pci") {
+ prop = of_get_property(phb, "cell-index", &len);
+ if (prop && (len == sizeof(prop)) && (*prop == idx)) {
+ hose = pci_find_hose_for_OF_device(phb);
+ of_node_put(phb);
+ return hose;
+ }
+ }
+
+ return NULL;
+}
+
+/* cPCI Hotswap register only supported on PCI 0 interface */
static ssize_t mv64x60_hs_reg_read(struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count)
{
- struct pci_dev *phb;
+ struct pci_controller *hose;
u32 v;
if (off > 0)
@@ -36,11 +58,12 @@ static ssize_t mv64x60_hs_reg_read(struct kobject *kobj,
if (count < MV64X60_VAL_LEN_MAX)
return -EINVAL;
- phb = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
- if (!phb)
+ hose = mv64x60_find_hose(0);
+ if (!hose)
return -ENODEV;
- pci_read_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, &v);
- pci_dev_put(phb);
+
+ early_read_config_dword(hose, 0, PCI_DEVFN(0, 0),
+ MV64X60_PCICFG_CPCI_HOTSWAP, &v);
return sprintf(buf, "0x%08x\n", v);
}
@@ -49,7 +72,7 @@ static ssize_t mv64x60_hs_reg_write(struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count)
{
- struct pci_dev *phb;
+ struct pci_controller *hose;
u32 v;
if (off > 0)
@@ -60,11 +83,12 @@ static ssize_t mv64x60_hs_reg_write(struct kobject *kobj,
if (sscanf(buf, "%i", &v) != 1)
return -EINVAL;
- phb = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
- if (!phb)
+ hose = mv64x60_find_hose(0);
+ if (!hose)
return -ENODEV;
- pci_write_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, v);
- pci_dev_put(phb);
+
+ early_write_config_dword(hose, 0, PCI_DEVFN(0, 0),
+ MV64X60_PCICFG_CPCI_HOTSWAP, v);
return count;
}
More information about the Linuxppc-dev
mailing list