[PATCH 0/9] 83xx DTS fixes and v1 conversions

[Paul Gortmaker]

Kumar Gala wrote:
> On Mon, 28 Jan 2008, Paul Gortmaker wrote:
>
>   
>> This series incorporates my earlier qe/muram fix before converting
>> the existing mpc83xx DTS files to v1 format.  I've also redone the
>> mpc834x_mds with the IRQs as decimal as per Kumar's comments and
>> re-included that too.  I've kept each board as a separate commit
>> in case one of them conflicts with what someone else is working on.
>>
>> Boards covered are: 8349mds, 8349mitx, 8349mitx-gp, 836x_mds,
>> 8323_mds, 8323_rdb, and the 8313_rdb.  Plus a small tweak to the
>> sbc8349 (it was already v1 -- but IRQs were in hex.)
>>
>> I've fed all the files to DTC before and after to ensure the
>> output is the same after the conversion.
>>
>> I'm not aware of any explicit rules for what is hex vs decimal.
>> I've tried to keep things that are usually discussed in decimal
>> as decimal quantities (i.e. cache size, IRQ, counts, indicies)
>> and all other data that you'd normally expect in hex (addresses,
>> IRQ flags, masks) as hex -- including prefixing 0x on values from
>> zero to 10 where it tends to make rows of numbers (e.g. ranges)
>> align for better readability, even though it isn't required.
>>
>>     
>
> Can you regen these patches (2..9) againast my latest tree.  Also, a
> single patch that cleans up all the boards is sufficient.
>   

The patches should be current to your tree still as of today; they are 
based on:

f09f415ea23272ae68f9322f90246680d46f4868        not-for-merge
branch 'for-2.6.25' of 
git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc

My patch #1 with all four qe/muram boards was posted earlier here:

http://ozlabs.org/pipermail/linuxppc-dev/2008-January/050767.html

Let me know what you need them based against and I can respin
as required.

P.



> - k
>