[PATCH v2 1/2] Add localbus and flash nodes to mpc8641_hpcn.dts

[Wade Farnsworth]

Add local bus, flash, and MTD partition nodes to mpc8641_hpcn.dts

Also add compatible field for the soc node, so that it will be picked up
by of_platform_bus_probe().

Signed-off-by: Wade Farnsworth <wfarnsworth at mvista.com>

---
Updated per Kumar's comments.

 arch/powerpc/boot/dts/mpc8641_hpcn.dts |   42 +++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index a719179..556a9ca 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -60,10 +60,52 @@
 		reg = <00000000 40000000>;	// 1G at 0x0
 	};
 
+	localbus at f8005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8641-localbus", "simple-bus";
+		reg = <f8005000 1000>;
+		interrupts = <13 2>;
+		interrupt-parent = <&mpic>;
+
+		ranges = <0 0 ff800000 00800000
+			  1 0 fe000000 01000000
+			  2 0 f8200000 00100000
+			  3 0 f8100000 00100000>;
+
+		flash at 0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 00800000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition at 0 {
+				label = "kernel";
+				reg = <00000000 00300000>;
+			};
+			partition at 300000 {
+				label = "firmware b";
+				reg = <00300000 00100000>;
+				read-only;
+			};
+			partition at 400000 {
+				label = "fs";
+				reg = <00400000 00300000>;
+			};
+			partition at 700000 {
+				label = "firmware a";
+				reg = <00700000 00100000>;
+				read-only;
+			};
+		};
+	};
+
 	soc8641 at f8000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <00000000 f8000000 00100000>;
 		reg = <f8000000 00001000>;	// CCSRBAR
 		bus-frequency = <0>;