[PATCH] [POWERPC] Always hookup PHB IO resource even when empty

Michael Ellerman michael at ellerman.id.au
Mon Jan 21 11:37:01 EST 2008

On Mon, 2008-01-21 at 11:32 +1100, Benjamin Herrenschmidt wrote:
> We must always hookup the pci_bus resource 0 to the PHB io_resource even
> if the later is empty (the bus has no IO support). Otherwise, some other
> code will end up hooking it up to something bogus and the resource tree
> will end up being broken.
> This fixes boot on QS20 Cell blades where the IDE driver failed to allocate
> the IO resources due to breakage of the resource tree.

Tested-by: Michael Ellerman <michael at ellerman.id.au>


Michael Ellerman
OzLabs, IBM Australia Development Lab

wwweb: http://michael.ellerman.id.au
phone: +61 2 6212 1183 (tie line 70 21183)

We do not inherit the earth from our ancestors,
we borrow it from our children. - S.M.A.R.T Person
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20080121/20bfa0f4/attachment.pgp>

More information about the Linuxppc-dev mailing list