x86/non-x86: percpu, node ids, apic ids x86.git fixup

Ingo Molnar mingo at elte.hu
Thu Jan 31 05:06:23 EST 2008


* Luck, Tony <tony.luck at intel.com> wrote:

> > thanks! Sorry about that: we cross-built on ARM but not on SMP 
> > non-x86 platforms so this dependency/breakage went unnoticed.
> 
> Yes ... all ia64 builds (UP and SMP) are broken at the moment. Please 
> Cc: me with the fixup patch.

Could you check the patch below? With this applied to latest -git, ia64 
buils fine for me in a cross-compiling environment. (but i dont know 
whether it boots ...)

	Ingo

----------------->
Subject: generic: percpu infrastructure to rebase the per cpu area to zero
From: travis at sgi.com

    * Support an option

	CONFIG_HAVE_ZERO_BASED_PER_CPU

      that makes offsets for per cpu variables to start at zero.

      If a percpu area starts at zero then:

	-  We do not need RELOC_HIDE anymore

	-  Provides for the future capability of architectures providing
	   a per cpu allocator that returns offsets instead of pointers.
	   The offsets would be independent of the processor so that
	   address calculations can be done in a processor independent way.
	   Per cpu instructions can then add the processor specific offset
	   at the last minute possibly in an atomic instruction.

      The data the linker provides is different for zero based percpu segments:

	__per_cpu_load	-> The address at which the percpu area was loaded
	__per_cpu_size	-> The length of the per cpu area

    * Removes the &__per_cpu_x in lockdep. The __per_cpu_x are already
      pointers. There is no need to take the address.

    * Changes generic setup_per_cpu_areas to allocate per_cpu space in
      node local memory.  This requires a generic early_cpu_to_node function.

Signed-off-by: Mike Travis <travis at sgi.com>
Reviewed-by: Christoph Lameter <clameter at sgi.com>
Signed-off-by: Ingo Molnar <mingo at elte.hu>
---
 arch/ia64/Kconfig                     |    2 -
 arch/ia64/kernel/module.c             |   11 --------
 arch/powerpc/Kconfig                  |    2 -
 arch/sparc64/mm/init.c                |    5 ++++
 include/asm-alpha/topology.h          |    1 
 include/asm-generic/percpu.h          |    7 ++++-
 include/asm-generic/sections.h        |   10 ++++++++
 include/asm-generic/topology.h        |    3 ++
 include/asm-generic/vmlinux.lds.h     |   15 ++++++++++++
 include/asm-ia64/percpu.h             |   29 +++++------------------
 include/asm-ia64/topology.h           |    1 
 include/asm-mips/mach-ip27/topology.h |    1 
 include/asm-powerpc/percpu.h          |   29 +----------------------
 include/asm-powerpc/topology.h        |    1 
 include/asm-s390/percpu.h             |   42 +++++++---------------------------
 include/asm-sparc64/percpu.h          |   22 ++---------------
 init/main.c                           |   18 ++++++++------
 kernel/lockdep.c                      |    4 +--
 18 files changed, 78 insertions(+), 125 deletions(-)

Index: linux-x86.q/arch/ia64/Kconfig
===================================================================
--- linux-x86.q.orig/arch/ia64/Kconfig
+++ linux-x86.q/arch/ia64/Kconfig
@@ -80,7 +80,7 @@ config GENERIC_TIME_VSYSCALL
 	bool
 	default y
 
-config ARCH_SETS_UP_PER_CPU_AREA
+config HAVE_SETUP_PER_CPU_AREA
 	def_bool y
 
 config DMI
Index: linux-x86.q/arch/ia64/kernel/module.c
===================================================================
--- linux-x86.q.orig/arch/ia64/kernel/module.c
+++ linux-x86.q/arch/ia64/kernel/module.c
@@ -940,14 +940,3 @@ module_arch_cleanup (struct module *mod)
 	if (mod->arch.core_unw_table)
 		unw_remove_unwind_table(mod->arch.core_unw_table);
 }
-
-#ifdef CONFIG_SMP
-void
-percpu_modcopy (void *pcpudst, const void *src, unsigned long size)
-{
-	unsigned int i;
-	for_each_possible_cpu(i) {
-		memcpy(pcpudst + per_cpu_offset(i), src, size);
-	}
-}
-#endif /* CONFIG_SMP */
Index: linux-x86.q/arch/powerpc/Kconfig
===================================================================
--- linux-x86.q.orig/arch/powerpc/Kconfig
+++ linux-x86.q/arch/powerpc/Kconfig
@@ -42,7 +42,7 @@ config GENERIC_HARDIRQS
 	bool
 	default y
 
-config ARCH_SETS_UP_PER_CPU_AREA
+config HAVE_SETUP_PER_CPU_AREA
 	def_bool PPC64
 
 config IRQ_PER_CPU
Index: linux-x86.q/arch/sparc64/mm/init.c
===================================================================
--- linux-x86.q.orig/arch/sparc64/mm/init.c
+++ linux-x86.q/arch/sparc64/mm/init.c
@@ -1328,6 +1328,11 @@ pgd_t swapper_pg_dir[2048];
 static void sun4u_pgprot_init(void);
 static void sun4v_pgprot_init(void);
 
+/* Dummy function */
+void __init setup_per_cpu_areas(void)
+{
+}
+
 void __init paging_init(void)
 {
 	unsigned long end_pfn, pages_avail, shift, phys_base;
Index: linux-x86.q/include/asm-alpha/topology.h
===================================================================
--- linux-x86.q.orig/include/asm-alpha/topology.h
+++ linux-x86.q/include/asm-alpha/topology.h
@@ -6,6 +6,7 @@
 #include <asm/machvec.h>
 
 #ifdef CONFIG_NUMA
+#define early_cpu_to_node(cpu)	cpu_to_node(cpu)
 static inline int cpu_to_node(int cpu)
 {
 	int node;
Index: linux-x86.q/include/asm-generic/percpu.h
===================================================================
--- linux-x86.q.orig/include/asm-generic/percpu.h
+++ linux-x86.q/include/asm-generic/percpu.h
@@ -43,7 +43,12 @@ extern unsigned long __per_cpu_offset[NR
  * Only S390 provides its own means of moving the pointer.
  */
 #ifndef SHIFT_PERCPU_PTR
-#define SHIFT_PERCPU_PTR(__p, __offset)	RELOC_HIDE((__p), (__offset))
+# ifdef CONFIG_HAVE_ZERO_BASED_PER_CPU
+#  define SHIFT_PERCPU_PTR(__p, __offset) \
+	((__typeof(__p))(((void *)(__p)) + (__offset)))
+# else
+#  define SHIFT_PERCPU_PTR(__p, __offset)	RELOC_HIDE((__p), (__offset))
+# endif /* CONFIG_HAVE_ZERO_BASED_PER_CPU */
 #endif
 
 /*
Index: linux-x86.q/include/asm-generic/sections.h
===================================================================
--- linux-x86.q.orig/include/asm-generic/sections.h
+++ linux-x86.q/include/asm-generic/sections.h
@@ -11,7 +11,17 @@ extern char _sinittext[], _einittext[];
 extern char _sextratext[] __attribute__((weak));
 extern char _eextratext[] __attribute__((weak));
 extern char _end[];
+#ifdef CONFIG_HAVE_ZERO_BASED_PER_CPU
+extern char __per_cpu_load[];
+extern char ____per_cpu_size[];
+#define __per_cpu_size ((unsigned long)&____per_cpu_size)
+#define __per_cpu_start ((char *)0)
+#define __per_cpu_end ((char *)__per_cpu_size)
+#else
 extern char __per_cpu_start[], __per_cpu_end[];
+#define __per_cpu_load __per_cpu_start
+#define __per_cpu_size (__per_cpu_end - __per_cpu_start)
+#endif
 extern char __kprobes_text_start[], __kprobes_text_end[];
 extern char __initdata_begin[], __initdata_end[];
 extern char __start_rodata[], __end_rodata[];
Index: linux-x86.q/include/asm-generic/topology.h
===================================================================
--- linux-x86.q.orig/include/asm-generic/topology.h
+++ linux-x86.q/include/asm-generic/topology.h
@@ -32,6 +32,9 @@
 #ifndef cpu_to_node
 #define cpu_to_node(cpu)	(0)
 #endif
+#ifndef early_cpu_to_node
+#define early_cpu_to_node(cpu)	cpu_to_node(cpu)
+#endif
 #ifndef parent_node
 #define parent_node(node)	(0)
 #endif
Index: linux-x86.q/include/asm-generic/vmlinux.lds.h
===================================================================
--- linux-x86.q.orig/include/asm-generic/vmlinux.lds.h
+++ linux-x86.q/include/asm-generic/vmlinux.lds.h
@@ -341,6 +341,20 @@
   	*(.initcall7.init)						\
   	*(.initcall7s.init)
 
+#ifdef CONFIG_HAVE_ZERO_BASED_PER_CPU
+#define PERCPU(align)							\
+	. = ALIGN(align);						\
+	percpu : { } :percpu						\
+	__per_cpu_load = .;						\
+	.data.percpu 0 : AT(__per_cpu_load - LOAD_OFFSET) {		\
+		*(.data.percpu.first)					\
+		*(.data.percpu)						\
+		*(.data.percpu.shared_aligned)				\
+		____per_cpu_size = .;					\
+	}								\
+	. = __per_cpu_load + ____per_cpu_size;				\
+	data : { } :data
+#else
 #define PERCPU(align)							\
 	. = ALIGN(align);						\
 	__per_cpu_start = .;						\
@@ -349,3 +363,4 @@
 		*(.data.percpu.shared_aligned)				\
 	}								\
 	__per_cpu_end = .;
+#endif
Index: linux-x86.q/include/asm-ia64/percpu.h
===================================================================
--- linux-x86.q.orig/include/asm-ia64/percpu.h
+++ linux-x86.q/include/asm-ia64/percpu.h
@@ -19,34 +19,14 @@
 # define PER_CPU_ATTRIBUTES	__attribute__((__model__ (__small__)))
 #endif
 
-#define DECLARE_PER_CPU(type, name)				\
-	extern PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
-
-/*
- * Pretty much a literal copy of asm-generic/percpu.h, except that percpu_modcopy() is an
- * external routine, to avoid include-hell.
- */
 #ifdef CONFIG_SMP
 
-extern unsigned long __per_cpu_offset[NR_CPUS];
-#define per_cpu_offset(x) (__per_cpu_offset[x])
-
-/* Equal to __per_cpu_offset[smp_processor_id()], but faster to access: */
-DECLARE_PER_CPU(unsigned long, local_per_cpu_offset);
+#define __my_cpu_offset	__ia64_per_cpu_var(local_per_cpu_offset)
 
-#define per_cpu(var, cpu)  (*RELOC_HIDE(&per_cpu__##var, __per_cpu_offset[cpu]))
-#define __get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __ia64_per_cpu_var(local_per_cpu_offset)))
-#define __raw_get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __ia64_per_cpu_var(local_per_cpu_offset)))
-
-extern void percpu_modcopy(void *pcpudst, const void *src, unsigned long size);
-extern void setup_per_cpu_areas (void);
 extern void *per_cpu_init(void);
 
 #else /* ! SMP */
 
-#define per_cpu(var, cpu)			(*((void)(cpu), &per_cpu__##var))
-#define __get_cpu_var(var)			per_cpu__##var
-#define __raw_get_cpu_var(var)			per_cpu__##var
 #define per_cpu_init()				(__phys_per_cpu_start)
 
 #endif	/* SMP */
@@ -57,7 +37,12 @@ extern void *per_cpu_init(void);
  * On the positive side, using __ia64_per_cpu_var() instead of __get_cpu_var() is slightly
  * more efficient.
  */
-#define __ia64_per_cpu_var(var)	(per_cpu__##var)
+#define __ia64_per_cpu_var(var)	per_cpu__##var
+
+#include <asm-generic/percpu.h>
+
+/* Equal to __per_cpu_offset[smp_processor_id()], but faster to access: */
+DECLARE_PER_CPU(unsigned long, local_per_cpu_offset);
 
 #endif /* !__ASSEMBLY__ */
 
Index: linux-x86.q/include/asm-ia64/topology.h
===================================================================
--- linux-x86.q.orig/include/asm-ia64/topology.h
+++ linux-x86.q/include/asm-ia64/topology.h
@@ -31,6 +31,7 @@
  * Returns the number of the node containing CPU 'cpu'
  */
 #define cpu_to_node(cpu) (int)(cpu_to_node_map[cpu])
+#define early_cpu_to_node(cpu)	cpu_to_node(cpu)
 
 /*
  * Returns a bitmask of CPUs on Node 'node'.
Index: linux-x86.q/include/asm-mips/mach-ip27/topology.h
===================================================================
--- linux-x86.q.orig/include/asm-mips/mach-ip27/topology.h
+++ linux-x86.q/include/asm-mips/mach-ip27/topology.h
@@ -23,6 +23,7 @@ struct cpuinfo_ip27 {
 extern struct cpuinfo_ip27 sn_cpu_info[NR_CPUS];
 
 #define cpu_to_node(cpu)	(sn_cpu_info[(cpu)].p_nodeid)
+#define early_cpu_to_node(cpu)	cpu_to_node(cpu)
 #define parent_node(node)	(node)
 #define node_to_cpumask(node)	(hub_data(node)->h_cpus)
 #define node_to_first_cpu(node)	(first_cpu(node_to_cpumask(node)))
Index: linux-x86.q/include/asm-powerpc/percpu.h
===================================================================
--- linux-x86.q.orig/include/asm-powerpc/percpu.h
+++ linux-x86.q/include/asm-powerpc/percpu.h
@@ -16,34 +16,9 @@
 #define __my_cpu_offset() get_paca()->data_offset
 #define per_cpu_offset(x) (__per_cpu_offset(x))
 
-/* var is in discarded region: offset to particular copy we want */
-#define per_cpu(var, cpu) (*RELOC_HIDE(&per_cpu__##var, __per_cpu_offset(cpu)))
-#define __get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __my_cpu_offset()))
-#define __raw_get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, local_paca->data_offset))
+#endif /* CONFIG_SMP */
+#endif /* __powerpc64__ */
 
-/* A macro to avoid #include hell... */
-#define percpu_modcopy(pcpudst, src, size)			\
-do {								\
-	unsigned int __i;					\
-	for_each_possible_cpu(__i)				\
-		memcpy((pcpudst)+__per_cpu_offset(__i),		\
-		       (src), (size));				\
-} while (0)
-
-extern void setup_per_cpu_areas(void);
-
-#else /* ! SMP */
-
-#define per_cpu(var, cpu)			(*((void)(cpu), &per_cpu__##var))
-#define __get_cpu_var(var)			per_cpu__##var
-#define __raw_get_cpu_var(var)			per_cpu__##var
-
-#endif	/* SMP */
-
-#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
-
-#else
 #include <asm-generic/percpu.h>
-#endif
 
 #endif /* _ASM_POWERPC_PERCPU_H_ */
Index: linux-x86.q/include/asm-powerpc/topology.h
===================================================================
--- linux-x86.q.orig/include/asm-powerpc/topology.h
+++ linux-x86.q/include/asm-powerpc/topology.h
@@ -15,6 +15,7 @@ static inline int cpu_to_node(int cpu)
 	return numa_cpu_lookup_table[cpu];
 }
 
+#define early_cpu_to_node(cpu)	cpu_to_node(cpu)
 #define parent_node(node)	(node)
 
 static inline cpumask_t node_to_cpumask(int node)
Index: linux-x86.q/include/asm-s390/percpu.h
===================================================================
--- linux-x86.q.orig/include/asm-s390/percpu.h
+++ linux-x86.q/include/asm-s390/percpu.h
@@ -13,49 +13,25 @@
  */
 #if defined(__s390x__) && defined(MODULE)
 
-#define __reloc_hide(var,offset) (*({			\
+#define SHIFT_PERCPU_PTR(ptr,offset) (({			\
 	extern int simple_identifier_##var(void);	\
 	unsigned long *__ptr;				\
-	asm ( "larl %0,per_cpu__"#var"@GOTENT"		\
-	    : "=a" (__ptr) : "X" (per_cpu__##var) );	\
-	(typeof(&per_cpu__##var))((*__ptr) + (offset));	}))
+	asm ( "larl %0, %1 at GOTENT"		\
+	    : "=a" (__ptr) : "X" (ptr) );		\
+	(typeof(ptr))((*__ptr) + (offset));	}))
 
 #else
 
-#define __reloc_hide(var, offset) (*({				\
+#define SHIFT_PERCPU_PTR(ptr, offset) (({				\
 	extern int simple_identifier_##var(void);		\
 	unsigned long __ptr;					\
-	asm ( "" : "=a" (__ptr) : "0" (&per_cpu__##var) );	\
-	(typeof(&per_cpu__##var)) (__ptr + (offset)); }))
+	asm ( "" : "=a" (__ptr) : "0" (ptr) );			\
+	(typeof(ptr)) (__ptr + (offset)); }))
 
 #endif
 
-#ifdef CONFIG_SMP
+#define __my_cpu_offset S390_lowcore.percpu_offset
 
-extern unsigned long __per_cpu_offset[NR_CPUS];
-
-#define __get_cpu_var(var) __reloc_hide(var,S390_lowcore.percpu_offset)
-#define __raw_get_cpu_var(var) __reloc_hide(var,S390_lowcore.percpu_offset)
-#define per_cpu(var,cpu) __reloc_hide(var,__per_cpu_offset[cpu])
-#define per_cpu_offset(x) (__per_cpu_offset[x])
-
-/* A macro to avoid #include hell... */
-#define percpu_modcopy(pcpudst, src, size)			\
-do {								\
-	unsigned int __i;					\
-	for_each_possible_cpu(__i)				\
-		memcpy((pcpudst)+__per_cpu_offset[__i],		\
-		       (src), (size));				\
-} while (0)
-
-#else /* ! SMP */
-
-#define __get_cpu_var(var) __reloc_hide(var,0)
-#define __raw_get_cpu_var(var) __reloc_hide(var,0)
-#define per_cpu(var,cpu) __reloc_hide(var,0)
-
-#endif /* SMP */
-
-#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
+#include <asm-generic/percpu.h>
 
 #endif /* __ARCH_S390_PERCPU__ */
Index: linux-x86.q/include/asm-sparc64/percpu.h
===================================================================
--- linux-x86.q.orig/include/asm-sparc64/percpu.h
+++ linux-x86.q/include/asm-sparc64/percpu.h
@@ -7,7 +7,6 @@ register unsigned long __local_per_cpu_o
 
 #ifdef CONFIG_SMP
 
-#define setup_per_cpu_areas()			do { } while (0)
 extern void real_setup_per_cpu_areas(void);
 
 extern unsigned long __per_cpu_base;
@@ -16,29 +15,14 @@ extern unsigned long __per_cpu_shift;
 	(__per_cpu_base + ((unsigned long)(__cpu) << __per_cpu_shift))
 #define per_cpu_offset(x) (__per_cpu_offset(x))
 
-/* var is in discarded region: offset to particular copy we want */
-#define per_cpu(var, cpu) (*RELOC_HIDE(&per_cpu__##var, __per_cpu_offset(cpu)))
-#define __get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __local_per_cpu_offset))
-#define __raw_get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __local_per_cpu_offset))
-
-/* A macro to avoid #include hell... */
-#define percpu_modcopy(pcpudst, src, size)			\
-do {								\
-	unsigned int __i;					\
-	for_each_possible_cpu(__i)				\
-		memcpy((pcpudst)+__per_cpu_offset(__i),		\
-		       (src), (size));				\
-} while (0)
+#define __my_cpu_offset __local_per_cpu_offset
+
 #else /* ! SMP */
 
 #define real_setup_per_cpu_areas()		do { } while (0)
 
-#define per_cpu(var, cpu)			(*((void)cpu, &per_cpu__##var))
-#define __get_cpu_var(var)			per_cpu__##var
-#define __raw_get_cpu_var(var)			per_cpu__##var
-
 #endif	/* SMP */
 
-#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
+#include <asm-generic/percpu.h>
 
 #endif /* __ARCH_SPARC64_PERCPU__ */
Index: linux-x86.q/init/main.c
===================================================================
--- linux-x86.q.orig/init/main.c
+++ linux-x86.q/init/main.c
@@ -374,18 +374,20 @@ EXPORT_SYMBOL(__per_cpu_offset);
 
 static void __init setup_per_cpu_areas(void)
 {
-	unsigned long size, i;
-	char *ptr;
-	unsigned long nr_possible_cpus = num_possible_cpus();
+	unsigned long size;
+	int cpu;
 
 	/* Copy section for each CPU (we discard the original) */
 	size = ALIGN(PERCPU_ENOUGH_ROOM, PAGE_SIZE);
-	ptr = alloc_bootmem_pages(size * nr_possible_cpus);
 
-	for_each_possible_cpu(i) {
-		__per_cpu_offset[i] = ptr - __per_cpu_start;
-		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
-		ptr += size;
+	printk(KERN_INFO "(generic)PERCPU: Allocating %lu bytes of per cpu data\n", size);
+
+	for_each_possible_cpu(cpu) {
+		char *ptr = alloc_bootmem_pages_node(
+				NODE_DATA(early_cpu_to_node(cpu)), size);
+
+		__per_cpu_offset[cpu] = ptr - __per_cpu_start;
+		memcpy(ptr, __per_cpu_load, __per_cpu_size);
 	}
 }
 #endif /* CONFIG_HAVE_SETUP_PER_CPU_AREA */
Index: linux-x86.q/kernel/lockdep.c
===================================================================
--- linux-x86.q.orig/kernel/lockdep.c
+++ linux-x86.q/kernel/lockdep.c
@@ -609,8 +609,8 @@ static int static_obj(void *obj)
 	 * percpu var?
 	 */
 	for_each_possible_cpu(i) {
-		start = (unsigned long) &__per_cpu_start + per_cpu_offset(i);
-		end   = (unsigned long) &__per_cpu_start + PERCPU_ENOUGH_ROOM
+		start = (unsigned long) __per_cpu_start + per_cpu_offset(i);
+		end   = (unsigned long) __per_cpu_start + PERCPU_ENOUGH_ROOM
 					+ per_cpu_offset(i);
 
 		if ((addr >= start) && (addr < end))



More information about the Linuxppc-dev mailing list