[PATCH] [POWERPC] Move RapidIO support code from arch/ppc
Kumar Gala
galak at kernel.crashing.org
Wed Jan 23 23:38:29 EST 2008
Do just enough to move the RapidIO support code for 85xx over from arch/ppc
into arch/powerpc and make it still build.
Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
---
arch/powerpc/kernel/Makefile | 1 +
arch/{ppc => powerpc}/kernel/rio.c | 0
arch/powerpc/sysdev/Makefile | 1 +
.../ppc85xx_rio.c => powerpc/sysdev/fsl_rio.c} | 0
.../ppc85xx_rio.h => powerpc/sysdev/fsl_rio.h} | 0
arch/ppc/kernel/Makefile | 1 -
arch/ppc/platforms/85xx/mpc85xx_ads_common.c | 3 +--
arch/ppc/platforms/85xx/stx_gp3.c | 2 +-
arch/ppc/platforms/85xx/tqm85xx.c | 2 +-
arch/ppc/syslib/Makefile | 1 -
10 files changed, 5 insertions(+), 6 deletions(-)
rename arch/{ppc => powerpc}/kernel/rio.c (100%)
rename arch/{ppc/syslib/ppc85xx_rio.c => powerpc/sysdev/fsl_rio.c} (100%)
rename arch/{ppc/syslib/ppc85xx_rio.h => powerpc/sysdev/fsl_rio.h} (100%)
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index d9b3770..58dbfef 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -70,6 +70,7 @@ pci64-$(CONFIG_PPC64) += pci_dn.o isa-bridge.o
obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
pci-common.o
obj-$(CONFIG_PCI_MSI) += msi.o
+obj-$(CONFIG_RAPIDIO) += rio.o
obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o \
machine_kexec_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_AUDIT) += audit.o
diff --git a/arch/ppc/kernel/rio.c b/arch/powerpc/kernel/rio.c
similarity index 100%
rename from arch/ppc/kernel/rio.c
rename to arch/powerpc/kernel/rio.c
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 66fe39c..f17e7b8 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_U3_DART) += dart_iommu.o
obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
obj-$(CONFIG_FSL_PCI) += fsl_pci.o
+obj-$(CONFIG_RAPIDIO) += fsl_rio.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
diff --git a/arch/ppc/syslib/ppc85xx_rio.c b/arch/powerpc/sysdev/fsl_rio.c
similarity index 100%
rename from arch/ppc/syslib/ppc85xx_rio.c
rename to arch/powerpc/sysdev/fsl_rio.c
diff --git a/arch/ppc/syslib/ppc85xx_rio.h b/arch/powerpc/sysdev/fsl_rio.h
similarity index 100%
rename from arch/ppc/syslib/ppc85xx_rio.h
rename to arch/powerpc/sysdev/fsl_rio.h
diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile
index 6b4f022..5da0ca7 100644
--- a/arch/ppc/kernel/Makefile
+++ b/arch/ppc/kernel/Makefile
@@ -13,7 +13,6 @@ obj-y := entry.o traps.o time.o misc.o \
ppc_htab.o
obj-$(CONFIG_MODULES) += ppc_ksyms.o
obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_RAPIDIO) += rio.o
obj-$(CONFIG_KGDB) += ppc-stub.o
obj-$(CONFIG_SMP) += smp.o smp-tbsync.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c
index 674806e..0706dca 100644
--- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c
+++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c
@@ -42,8 +42,6 @@
#include <mm/mmu_decl.h>
-#include <syslib/ppc85xx_rio.h>
-
#include <platforms/85xx/mpc85xx_ads_common.h>
#ifndef CONFIG_PCI
@@ -190,6 +188,7 @@ mpc85xx_exclude_device(u_char bus, u_char devfn)
#endif /* CONFIG_PCI */
#ifdef CONFIG_RAPIDIO
+extern void mpc85xx_rio_setup(int law_start, int law_size);
void platform_rio_init(void)
{
/* 512MB RIO LAW at 0xc0000000 */
diff --git a/arch/ppc/platforms/85xx/stx_gp3.c b/arch/ppc/platforms/85xx/stx_gp3.c
index 731b40e..8748da3 100644
--- a/arch/ppc/platforms/85xx/stx_gp3.c
+++ b/arch/ppc/platforms/85xx/stx_gp3.c
@@ -54,7 +54,6 @@
#include <syslib/cpm2_pic.h>
#include <syslib/ppc85xx_common.h>
-#include <syslib/ppc85xx_rio.h>
unsigned char __res[sizeof(bd_t)];
@@ -270,6 +269,7 @@ int mpc85xx_exclude_device(u_char bus, u_char devfn)
#endif /* CONFIG_PCI */
#ifdef CONFIG_RAPIDIO
+extern void mpc85xx_rio_setup(int law_start, int law_size);
void
platform_rio_init(void)
{
diff --git a/arch/ppc/platforms/85xx/tqm85xx.c b/arch/ppc/platforms/85xx/tqm85xx.c
index 4ee2bd1..2a863a8 100644
--- a/arch/ppc/platforms/85xx/tqm85xx.c
+++ b/arch/ppc/platforms/85xx/tqm85xx.c
@@ -54,7 +54,6 @@
#include <syslib/ppc85xx_setup.h>
#include <syslib/cpm2_pic.h>
#include <syslib/ppc85xx_common.h>
-#include <syslib/ppc85xx_rio.h>
#ifndef CONFIG_PCI
unsigned long isa_io_base = 0;
@@ -309,6 +308,7 @@ int mpc85xx_exclude_device(u_char bus, u_char devfn)
#endif /* CONFIG_PCI */
#ifdef CONFIG_RAPIDIO
+extern void mpc85xx_rio_setup(int law_start, int law_size);
void platform_rio_init(void)
{
/* 512MB RIO LAW at 0xc0000000 */
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index 543795b..5e16228 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -93,7 +93,6 @@ obj-$(CONFIG_85xx) += open_pic.o ppc85xx_common.o ppc85xx_setup.o \
ifeq ($(CONFIG_85xx),y)
obj-$(CONFIG_PCI) += pci_auto.o
endif
-obj-$(CONFIG_RAPIDIO) += ppc85xx_rio.o
obj-$(CONFIG_83xx) += ppc83xx_setup.o ppc_sys.o \
mpc83xx_sys.o mpc83xx_devices.o ipic.o
ifeq ($(CONFIG_83xx),y)
--
1.5.3.7
More information about the Linuxppc-dev
mailing list