[PATCH/RFCv2] wdt: Add support for PowerQUICC watchdog

[Kumar Gala]

On Jan 17, 2008, at 8:55 AM, Jochen Friedrich wrote:

> Hi Kumar,
>
>> Why are you commenting on mpc83xx_wdt with respect to pq1_wdt?
>> Also, is this driver just for PQ1 platforms or PQ1 & PQ2?  If its  
>> just pq1 we should probably call it pq1_wdt*
>
> It should be for pq1, pq2 and pq2pro. However, i only have the  
> possibility
> to test this on pq1.
>
>>> arch/powerpc/platforms/8xx/mpc86xads_setup.c |    5 +
>>> arch/powerpc/platforms/8xx/mpc885ads_setup.c |    5 +
>>> arch/powerpc/sysdev/Makefile                 |    3 +
>>> arch/powerpc/sysdev/pq_wdt.c                 |  203 +++++++++++++++ 
>>> ++++++++
>>> arch/powerpc/sysdev/pq_wdt.h                 |   28 ++++
>>> drivers/watchdog/Kconfig                     |   13 ++-
>>> drivers/watchdog/Makefile                    |    1 +
>>> drivers/watchdog/pq_wdt.c                    |  225 +++++++++++++++ 
>>> +++++++++++
>>> 8 files changed, 482 insertions(+), 1 deletions(-)
>>> create mode 100644 arch/powerpc/sysdev/pq_wdt.c
>>> create mode 100644 arch/powerpc/sysdev/pq_wdt.h
>>> create mode 100644 drivers/watchdog/pq_wdt.c
>> What are the bits in sysdev/pq_wdt.{c,h}.  Why aren't these just in  
>> drivers/watchdog?
>
> These are the parts needed to boot a device with activated watchdog.  
> If a bootloader like u-boot activates the watchdog, it can't be  
> deactivated again
> and needs to be reset at regular intervals. This is done using a  
> kernel timer.
> The driver in drivers/watchdog disables the timer as soon as the wdt  
> device
> is opened.

Ok, but is there a need for these bits to be in sysdev vs just being  
in the driver and calling into it.

- k