[PATCH] ASoC drivers for the Freescale MPC8610 SoC

[David Gibson]

On Tue, Jan 01, 2008 at 12:25:32PM -0500, Jon Smirl wrote:
> On 12/19/07, Timur Tabi <timur at freescale.com> wrote:
> > +               ssi at 16000 {
> > +                       compatible = "fsl,ssi";
> > +                       cell-index = <0>;
> > +                       reg = <16000 100>;
> > +                       interrupt-parent = <&mpic>;
> > +                       interrupts = <3e 2>;
> > +                       fsl,mode = "i2s-slave";
> > +                       codec {
> > +                               compatible = "cirrus,cs4270";
> > +                               /* MCLK source is a stand-alone oscillator */
> > +                               bus-frequency = <bb8000>;
> > +                       };
> > +               };
> 
> Does this need to be bus-frequency? It's always called MCLK in all of
> the literature.
> 
> In my case the MCLK comes from a chip on the i2c bus that is
> programmable How would that be encoded?.

Grah!  If there's one obvious frequency for a node, it should always
be "clock-frequency".  This bus-frequency nonsense seems to be a
disease that started as a secondary frequency in Freescale CPU nodes,
and has escaped to all sorts of other places.

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson