[PATCH 1/9] qe/muram dts: Explicitly set address-cells and size cells for muram

[Paul Gortmaker]

Currently there are several dts that don't specify address or size
cells for the muram.  This causes dtc to use default values, one of
which is an address-cells of two, and this breaks the parsing of the
muram ranges, which is assuming an address-cells of one. For example:

Warning (reg_format): "reg" property in
/qe at e0100000/muram at 10000/data-only at 0 has invalid length
(8 bytes) (#address-cells == 2, #size-cells == 1)

Explicitly setting the address and size cells gets it parsed properly
and gets rid of the four dtc warnings.

Signed-off-by: Paul Gortmaker <paul.gortmaker at windriver.com>
---
 arch/powerpc/boot/dts/mpc836x_mds.dts |    4 +++-
 1 files changed, 3 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 2181d2c..10b5d6d 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -214,10 +214,12 @@
 		bus-frequency = <179A7B00>;
 
 		muram at 10000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
 			device_type = "muram";
 			ranges = <0 00010000 0000c000>;
 
-			data-only at 0{
+			data-only at 0 {
 				reg = <0 c000>;
 			};
 		};
-- 
1.5.4.rc4.gcab31