[PATCH 3/9] powerpc: Add the MPC8315E RDB dts
Kim Phillips
kim.phillips at freescale.com
Fri Jan 25 13:46:06 EST 2008
Add the dts for the MPC8315E Reference Development Board (RDB).
The board is a mini-ITX reference board with 128M DDR2, 8M flash,
32M NAND, USB, PCI, gigabit ethernet, SATA, and serial.
Signed-off-by: Jerry Huang <Chang-Ming.Huang at freescale.com>
Signed-off-by: Kim Phillips <kim.phillips at freescale.com>
---
arch/powerpc/boot/dts/mpc8315erdb.dts | 287 +++++++++++++++++++++++++++++++++
1 files changed, 287 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/mpc8315erdb.dts
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
new file mode 100644
index 0000000..05c972a
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -0,0 +1,287 @@
+/*
+ * MPC8315E RDB Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ compatible = "fsl,mpc8315erdb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8315 at 0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <16384>;
+ i-cache-size = <16384>;
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>; // 128MB at 0
+ };
+
+ localbus at e0005000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
+ reg = <0xe0005000 0x1000>;
+ interrupts = <77 8>;
+ interrupt-parent = <&ipic>;
+
+ // CS0 and CS1 are swapped when
+ // booting from nand, but the
+ // addresses are the same.
+ ranges = <0 0 0xfe000000 0x00800000
+ 1 0 0xe0600000 0x00002000
+ 2 0 0xf0000000 0x00020000
+ 3 0 0xfa000000 0x00008000>;
+
+ flash at 0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0 0 0x800000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ nand at 1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8315-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <1 0 0x2000>;
+
+ u-boot at 0 {
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ kernel at 100000 {
+ reg = <0x100000 0x300000>;
+ };
+ fs at 400000 {
+ reg = <0x400000 0x1c00000>;
+ };
+ };
+ };
+
+ immr at e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+ ranges = <0 0xe0000000 0x00100000>;
+ reg = <0xe0000000 0x00000200>;
+ bus-frequency = <0>;
+
+ wdt at 200 {
+ device_type = "watchdog";
+ compatible = "mpc83xx_wdt";
+ reg = <0x200 0x100>;
+ };
+
+ i2c at 3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <14 8>;
+ interrupt-parent = < &ipic >;
+ dfsrr;
+ rtc at 68 {
+ device_type = "rtc";
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
+ spi at 7000 {
+ device_type = "spi";
+ compatible = "fsl_spi";
+ reg = <0x7000 0x1000>;
+ interrupts = <16 8>;
+ interrupt-parent = < &ipic >;
+ mode = "cpu";
+ };
+
+ usb at 23000 {
+ compatible = "fsl-usb2-dr";
+ reg = <0x23000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = < &ipic >;
+ interrupts = <38 8>;
+ phy_type = "utmi";
+ };
+
+ mdio at 24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x24520 0x20>;
+ phy0: ethernet-phy at 0 {
+ interrupt-parent = < &ipic >;
+ interrupts = <20 8>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy at 1 {
+ interrupt-parent = < &ipic >;
+ interrupts = <19 8>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ enet0: ethernet at 24000 {
+ cell-index = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <32 8 33 8 34 8>;
+ interrupt-parent = < &ipic >;
+ phy-handle = < &phy0 >;
+ };
+
+ enet1: ethernet at 25000 {
+ cell-index = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <35 8 36 8 37 8>;
+ interrupt-parent = < &ipic >;
+ phy-handle = < &phy1 >;
+ };
+
+ serial0: serial at 4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <9 8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ serial1: serial at 4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <10 8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ crypto at 30000 {
+ model = "SEC3";
+ device_type = "crypto";
+ compatible = "talitos";
+ reg = <0x30000 0x10000>;
+ interrupts = <11 8>;
+ interrupt-parent = < &ipic >;
+ /* Rev. 3.0 geometry */
+ num-channels = <4>;
+ channel-fifo-len = <24>;
+ exec-units-mask = <0x000001fe>;
+ descriptor-types-mask = <0x03ab0ebf>;
+ };
+
+ sata at 18000 {
+ compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
+ reg = <0x18000 0x1000>;
+ cell-index = <1>;
+ interrupts = <44 8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ sata at 19000 {
+ compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
+ reg = <0x19000 0x1000>;
+ cell-index = <2>;
+ interrupts = <45 8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ /* IPIC
+ * interrupts cell = <intr #, sense>
+ * sense values match linux IORESOURCE_IRQ_* defines:
+ * sense == 8: Level, low assertion
+ * sense == 2: Edge, high-to-low change
+ */
+ ipic: interrupt-controller at 700 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x700 0x100>;
+ device_type = "ipic";
+ };
+ };
+
+ pci0: pci at e0008500 {
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0E -mini PCI */
+ 0x7000 0 0 1 &ipic 18 8
+ 0x7000 0 0 2 &ipic 18 8
+ 0x7000 0 0 3 &ipic 18 8
+ 0x7000 0 0 4 &ipic 18 8
+
+ /* IDSEL 0x0F -mini PCI */
+ 0x7800 0 0 1 &ipic 17 8
+ 0x7800 0 0 2 &ipic 17 8
+ 0x7800 0 0 3 &ipic 17 8
+ 0x7800 0 0 4 &ipic 17 8
+
+ /* IDSEL 0x10 - PCI slot */
+ 0x8000 0 0 1 &ipic 48 8
+ 0x8000 0 0 2 &ipic 17 8
+ 0x8000 0 0 3 &ipic 48 8
+ 0x8000 0 0 4 &ipic 17 8>;
+ interrupt-parent = < &ipic >;
+ interrupts = <66 8>;
+ bus-range = <0 0>;
+ ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
+ 0x42000000 0 0x80000000 0x80000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xe0300000 0 0x00100000>;
+ clock-frequency = <66666666>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xe0008500 0x100>;
+ compatible = "fsl,mpc8349-pci";
+ device_type = "pci";
+ };
+};
--
1.5.2.2
More information about the Linuxppc-dev
mailing list