add phy-handle property for fec_mpc52xx

[Grant Likely]

On 1/9/08, Olaf Hering <olaf at aepfle.de> wrote:
>
> The new network driver fec_mpc52xx will not work on efika because the
> firmware does not provide all required properties.
> http://www.powerdeveloper.org/asset/by-id/46 has a Forth script to
> create more properties. But only the phy stuff is required to get a
> working network.
>
> This should go into the kernel because its appearently
> impossible to boot the script via tftp and then load the real boot
> binary (yaboot or zimage).
>

Signed-off-by?

-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.