[PATCH] [POWERPC] Always build setup-bus.c on powerpc

[Kumar Gala]

The common arch/powerpc code calls in to functions in setup-bus.c
so some builds of ppc32 would fail.

Note, ppc32 usage of setup-irq.c is limited to arch/ppc and should be
removed when arch/ppc goes away.

Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
---

Greg, recent changes that BenH has made to the arch/powerpc pci code make
this necessary. If you don't have an issue I'd like this patch to go via
the paulus's powerpc.git tree.

- k

 drivers/pci/Makefile |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 945bf02..869d689 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -31,8 +31,8 @@ obj-$(CONFIG_ALPHA) += setup-bus.o setup-irq.o
 obj-$(CONFIG_ARM) += setup-bus.o setup-irq.o
 obj-$(CONFIG_PARISC) += setup-bus.o
 obj-$(CONFIG_SUPERH) += setup-bus.o setup-irq.o
-obj-$(CONFIG_PPC32) += setup-irq.o setup-bus.o
-obj-$(CONFIG_PPC64) += setup-bus.o
+obj-$(CONFIG_PPC) += setup-bus.o
+obj-$(CONFIG_PPC32) += setup-irq.o
 obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
 obj-$(CONFIG_X86_VISWS) += setup-irq.o

-- 
1.5.3.7