January 2008 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Tue Jan 1 03:10:06 EST 2008
Ending: Thu Jan 31 23:54:51 EST 2008
Messages: 2072

• [PATCH 0/8] pseries: phyp dump: hypervisor-assisted dump   Manish Ahuja
• [PATCH 1/8] pseries: phyp dump: Docmentation   Manish Ahuja
• [PATCH 2/8] pseries: phyp dump: config file   Manish Ahuja
• [PATCH 3/8] pseries: phyp dump: reserve-release proof-of-concept   Manish Ahuja
• [PATCH 4/8] pseries: phyp dump: use sysfs to release reserved mem   Manish Ahuja
• [PATCH 3/8] pseries: phyp dump: reserve-release proof-of-concept   Manish Ahuja
• [PATCH 5/8] pseries: phyp dump: register dump area.   Manish Ahuja
• [PATCH 6/8] pseries: phyp dump: debugging print routines.   Manish Ahuja
• [PATCH 7/8] pseries: phyp dump: Unregister and print dump areas.   Manish Ahuja
• [PATCH 8/8] pseries: phyp dump: Tracking memory range freed.   Manish Ahuja
• [PATCH 3/8] pseries: phyp dump: reserve-release proof-of-concept   Manish Ahuja
• [PATCH 7/8] pseries: phyp dump: Unregister and print dump areas.   Manish Ahuja
• [PATCH 1/8] pseries: phyp dump: Docmentation   Manish Ahuja
• [PATCH 1/8] pseries: phyp dump: Docmentation   Manish Ahuja
• [PATCH 0/8] pseries: phyp dump: hypervisor-assisted dump   Manish Ahuja
• [PATCH 0/8] pseries: phyp dump: hypervisor-assisted dump   Manish Ahuja
• [PATCH 1/8] pseries: phyp dump: Docmentation   Manish Ahuja
• [PATCH 2/8] pseries: phyp dump: reserve-release proof-of-concept   Manish Ahuja
• [PATCH 3/8] pseries: phyp dump: use sysfs to release reserved mem   Manish Ahuja
• [PATCH 2/8] pseries: phyp dump: reserve-release proof-of-concept   Manish Ahuja
• [PATCH 4/8] pseries: phyp dump: register dump area.   Manish Ahuja
• [PATCH 2/8] pseries: phyp dump: reserve-release proof-of-concept   Manish Ahuja
• [PATCH 5/8] pseries: phyp dump: debugging print routines.   Manish Ahuja
• [PATCH 6/8] pseries: phyp dump: Unregister and print dump areas.   Manish Ahuja
• [PATCH 7/8] pseries: phyp dump: Tracking memory range freed.   Manish Ahuja
• [PATCH 8/8] pseries: phyp dump: config file   Manish Ahuja
• crash in kmem_cache_init   Nish Aravamudan
• crash in kmem_cache_init   Nish Aravamudan
• [PATCH] Fake NUMA emulation for PowerPC (Take 2)   Nish Aravamudan
• [PATCH] Fix boot problem in situations where the boot CPU is running on a memoryless node   Nishanth Aravamudan
• [PATCH] Fix boot problem in situations where the boot CPU is running on a memoryless node   Nishanth Aravamudan
• [BUILD FAILURE] 2.6.24-rc8-git1 Kernel Build Failure on power box   Kamalesh Babulal
• 2.6.24-rc8-mm1 build failure on headers_check   Kamalesh Babulal
• 2.6.24-rc8-mm1 Kernel oops will running kernbench   Kamalesh Babulal
• 2.6.24-rc8-mm1 Kernel oops will running kernbench   Kamalesh Babulal
• 2.6.24-rc8-mm1 Kernel oops will running kernbench   Kamalesh Babulal
• 2.6.24 Kernel oops will running kernbench regression from 2.6.24-rc8-mm1   Kamalesh Babulal
• [BUILD FAILURE]2.6.24-git{1,2} kernel powerpc linkage failure   Kamalesh Babulal
• [BUILD FAILURE] 2.6.24-git7 section type conflict at various drivers on powerpc   Kamalesh Babulal
• [PATCH v4 02/13] [POWERPC] Add 'fsl, lpb' bus type for MPC5200 LocalPlus Bus   Marian Balakowicz
• [PATCH] [POWERPC] Update TQM5200, CM5200 and Motion-PRO _defconfig and .dts files   Marian Balakowicz
• Patches added to master/for-2.6.25 branch of powerpc.git   Marian Balakowicz
• [PATCH] [POWERPC] Update TQM5200, CM5200 and Motion-PRO _defconfig and .dts files   Marian Balakowicz
• [PATCH v2] [POWERPC] Update TQM5200, CM5200 and Motion-PRO .dts files   Marian Balakowicz
• [PATCH v2] [POWERPC] Update TQM5200, CM5200 and Motion-PRO _defconfig files   Marian Balakowicz
• [PATCH v5] [POWERPC] Add LED driver for Promess Motion-PRO board.   Marian Balakowicz
• [PATCH] [POWERPC] Update TQM5200, CM5200 and Motion-PRO _defconfig and .dts files   Marian Balakowicz
• [PATCH] [POWERPC] Update TQM5200, CM5200 and Motion-PRO _defconfig and .dts files   Marian Balakowicz
• [PATCH v6] [POWERPC] Add LED driver for Promess Motion-PRO board.   Marian Balakowicz
• [PATCH][ppc] logical/bitand typo in powerpc/boot/4xx.c   Valentine Barshak
• [MPC5200] problem running FEC and ATA   Juergen Beisert
• [MPC5200] problem running FEC and ATA   Juergen Beisert
• [MPC5200] problem running FEC and ATA   Juergen Beisert
• [2.6.24 patch] Fix Cell OProfile support   Arnd Bergmann
• Please pull powerpc.git merge branch   Arnd Bergmann
• [PATCH] [2.6.24] Add PPC nvram ioctls to compat_ioctl   Arnd Bergmann
• [PATCH] powerpc: Add MPC837x PCIE controller RC mode support   Arnd Bergmann
• [PATCH 2/5] [POWERPC] cell: Use machine_*_initcall() hooks in platform code   Arnd Bergmann
• [PATCH] powerpc: Add MPC837x PCIE controller RC mode support   Arnd Bergmann
• [PATCH] powerpc: Add MPC837x PCIE controller RC mode support   Arnd Bergmann
• [PATCh v3] powerpc: add hugepagesz boot-time parameter   Arnd Bergmann
• [PATCh v3] powerpc: add hugepagesz boot-time parameter   Arnd Bergmann
• [PATCH] i2c-ibm_iic driver   Arnd Bergmann
• [patch 2/3] PS3: Add logical performance monitor device support   Arnd Bergmann
• [patch 3/3] PS3: Add logical performance monitor driver support   Arnd Bergmann
• [PATCH v2] [POWERPC] Provide a way to protect 4k subpages when using 64k pages   Arnd Bergmann
• [PATCH] i2c-ibm_iic driver   Arnd Bergmann
• [PATCH] i2c-ibm_iic driver   Arnd Bergmann
• [PATCH] MTD for Taco   Arnd Bergmann
• [patch 3/3] PS3: Add logical performance monitor driver support   Arnd Bergmann
• [PATCh v3] powerpc: add hugepagesz boot-time parameter   Arnd Bergmann
• [PATCH 2/7] powerpc: allow localbus compatible serial ports for console device   Arnd Bergmann
• [PATCH 2/7] powerpc: allow localbus compatible serial ports for console device   Arnd Bergmann
• [PATCH 3/8] pseries: phyp dump: reserve-release proof-of-concept   Arnd Bergmann
• [PATCH 6/8] pseries: phyp dump: debugging print routines.   Arnd Bergmann
• Generic MMC-over-SPI binding?   Arnd Bergmann
• [PATCH 3/7] Basic Freescale MPC512x support   Arnd Bergmann
• [PATCH 3/7] Basic Freescale MPC512x support   Arnd Bergmann
• [PATCH 6/7] Add mpc512x_find_ips_freq   Arnd Bergmann
• [patch 1/4] POWERPC: Add Cell SPRN bookmark register   Arnd Bergmann
• Generic MMC-over-SPI binding?   Arnd Bergmann
• [PATCH 2/7] powerpc: allow localbus compatible serial ports for console device   Arnd Bergmann
• [PATCH 6/7] [POWERPC] Get rid of conditional includes of board specific setup   Arnd Bergmann
• [PATCH] powerpc: reduce code duplication in legacy_serial, add UART parent types   Arnd Bergmann
• [Cbe-oss-dev] [PATCH 3/3] Cell IOMMU static mapping support   Arnd Bergmann
• [PATCH] hide kernel only code in asm-powerpc/elf.h   Arnd Bergmann
• Patches added to for-2.6.25/master branches of powerpc.git   Arnd Bergmann
• [PATCH] [NET]: Remove PowerPC code from fec.c   Arnd Bergmann
• [PATCH 8/8] Cell IOMMU fixed mapping support   Arnd Bergmann
• [PATCH] windfarm: add PowerMac 12,1 support   Étienne Bersac
• [PATCH, ppc64] improve dedotify()   Jan Beulich
• [PATCH] sysctl: Kill binary sysctl KERN_PPC_L2CR   Eric W. Biederman
• OProfile callgraph support not working correctly on PPC processors   Anton Blanchard
• [PATCH] enable built-in networking for Sequoia defconfig   Hollis Blanchard
• [PATCH 1/3] 8xx: Analogue & Micro Adder875 board support.   Vitaly Bordug
• [PATCH] [POWERPC] Sequoia: typo in calling machine_device_initcall()   Josh Boyer
• [PATCH] powerpc: #address-cells & #size-cells properties not inherited   Josh Boyer
• [PATCH] powerpc: #address-cells & #size-cells properties not inherited   Josh Boyer
• [PATCH] ibm_newemac: Increase number of default rx-/tx-buffers   Josh Boyer
• [PATCH] ibm_newemac: Increase number of default rx-/tx-buffers   Josh Boyer
• [PATCH] Fix remainder calculating bug in single floating point division   Josh Boyer
• [PATCH v6] qe: add ability to upload QE firmware   Josh Boyer
• [PATCH] enable built-in networking for Sequoia defconfig   Josh Boyer
• [PATCH] Hwmon for Taco   Josh Boyer
• [PATCH] Hwmon for Taco   Josh Boyer
• [PATCH] enable built-in networking for Sequoia defconfig   Josh Boyer
• Please pull linux-2.6-virtex.git   Josh Boyer
• [PATCH] enable built-in networking for Sequoia defconfig   Josh Boyer
• PCI interrupt assignment on sequoia board   Josh Boyer
• [PATCH] MTD for Taco   Josh Boyer
• [PATCH] MTD for Taco   Josh Boyer
• Base Warp Platform support   Josh Boyer
• [PATCH] Miscellaneous for Taco   Josh Boyer
• [PATCH] Miscellaneous for Taco   Josh Boyer
• [PATCH 2/5] Warp Base Platform - dts   Josh Boyer
• [PATCH 2/5] Warp Base Platform - dts   Josh Boyer
• How complete should the DTS be?   Josh Boyer
• ibm4xx_quiesce_eth?   Josh Boyer
• Please pull linux-2.6-virtex.git   Josh Boyer
• libfdt: Add fdt_set_name() function   Josh Boyer
• [PATCH 1/5] Warp Base Platform   Josh Boyer
• [PATCH 2/5] Warp Base Platform - dts   Josh Boyer
• [PATCH 3/5] Warp Base Platform   Josh Boyer
• [PATCH] MTD for Taco   Josh Boyer
• [PATCH 1/2] [POWERPC] 4xx: Add 405EXr to cputable   Josh Boyer
• [PATCH] [POWERPC] 4xx: Remove "i2c" and "xxmii-interface" device_types from dts   Josh Boyer
• Please pull from 'for-2.6.25' branch of 4xx tree   Josh Boyer
• [PATCH] [POWERPC] 4xx: Remove "i2c" and "xxmii-interface" device_types from dts   Josh Boyer
• [PATCH] net: NEWEMAC: Remove "rgmii-interface" from rgmii matching table   Josh Boyer
• [PATCH] MTD for Taco   Josh Boyer
• [PATCH 1/5] Warp Base Platform   Josh Boyer
• [PATCH 1/2] Make setjmp/longjmp code generic   Josh Boyer
• Warp Watchdog   Josh Boyer
• [PATCH] Various new ibm405 DCRN #defines   Josh Boyer
• [PATCH] Various new ibm405 DCRN #defines   Josh Boyer
• [PATCH 1/3 v3] Add StorCenter DTS first draft.   Josh Boyer
• [PATCHv2 0/8] [POWERPC] 8xx cleanups   Josh Boyer
• [PATCH][ppc] logical/bitand typo in powerpc/boot/4xx.c   Josh Boyer
• Please pull 'for-2.6.25' branch of 4xx tree   Josh Boyer
• Reminder: removal of arch/ppc   Josh Boyer
• Reminder: removal of arch/ppc   Josh Boyer
• Reminder: removal of arch/ppc   Josh Boyer
• Reminder: removal of arch/ppc   Josh Boyer
• Patches added to for-2.6.25/master branches of powerpc.git   Josh Boyer
• [patch 00/11] ps3av/3fb patches for 2.6.25   Josh Boyer
• l2cr missing from /proc   Bob Brose
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Mark Brown
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Mark Brown
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Mark Brown
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Mark Brown
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Mark Brown
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Mark Brown
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Mark Brown
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Mark Brown
• [patch v4 0/4] Cypress c67x00 (EZ-Host/EZ-OTG) support   David Brownell
• [patch v4 0/4] Cypress c67x00 (EZ-Host/EZ-OTG) support   David Brownell
• [patch v4 0/4] Cypress c67x00 (EZ-Host/EZ-OTG) support   David Brownell
• [PATCH 2/3] i2c: Convert all new-style drivers to use module aliasing   David Brownell
• [2.6 patch] powerpc: vdso_do_func_patch{32,64}() must be __init   Adrian Bunk
• [2.6 patch] powerpc: free_property() mustn't be __init   Adrian Bunk
• [2.6 patch] hvc_rtas_init() must be __init   Adrian Bunk
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Adrian Bunk
• [RFC 2/2] mpc52xx_psc_spi device driver must not touch port_config and cdm   Dragos Carp
• [PATCH/RFCv2] [POWERPC] Add support for freescale watchdog to CPM serial driver.   Alan Cox
• [PATCH/RFCv2] [POWERPC] Add support for freescale watchdog to CPM serial driver.   Alan Cox
• [PATCH 0/5] Version 17, series to add device tree naming to i2c   Jean Delvare
• [i2c] [PATCH 0/5] Version 17, series to add device tree naming to i2c   Jean Delvare
• [i2c] [PATCH 0/5] Version 17, series to add device tree naming to i2c   Jean Delvare
• [i2c] [PATCH 1/5] Implement module aliasing for i2c to translate from device tree names   Jean Delvare
• [i2c] [PATCH 1/5] Implement module aliasing for i2c to translate from device tree names   Jean Delvare
• [i2c] [PATCH 0/5] Version 17, series to add device tree naming to i2c   Jean Delvare
• [i2c] [PATCH] update module-init-tools to support the i2c subsystem   Jean Delvare
• [i2c] [PATCH 1/5] Implement module aliasing for i2c to translate from device tree names   Jean Delvare
• [i2c] [PATCH 0/5] Version 17, series to add device tree naming to i2c   Jean Delvare
• [i2c] [PATCH] update module-init-tools to support the i2c subsystem   Jean Delvare
• [PATCH 1/5] Implement module aliasing for i2c to translate from device tree names   Jean Delvare
• [i2c] [PATCH] update module-init-tools to support the i2c subsystem   Jean Delvare
• [PATCH 1/5] Implement module aliasing for i2c to translate from device tree names   Jean Delvare
• [PATCH 1/5] Implement module aliasing for i2c to translate from device tree names   Jean Delvare
• [i2c] [PATCH] update module-init-tools to support the i2c subsystem   Jean Delvare
• [i2c] [PATCH] update module-init-tools to support the i2c subsystem   Jean Delvare
• [i2c] [PATCH] update module-init-tools to support the i2c subsystem   Jean Delvare
• [i2c] [PATCH 19 3/5] Clean up error returns   Jean Delvare
• [PATCH 0/3] i2c: Use the standard, alias-based device/driver matching scheme   Jean Delvare
• [PATCH 1/3] i2c: Add support for device alias names   Jean Delvare
• [PATCH 2/3] i2c: Convert all new-style drivers to use module aliasing   Jean Delvare
• [PATCH 3/3] i2c: Kill the old driver matching scheme   Jean Delvare
• [i2c] [PATCH 0/3] i2c: Use the standard, alias-based device/driver matching scheme   Jean Delvare
• [i2c] [PATCH 19 3/5] Clean up error returns   Jean Delvare
• [PATCH 2/3] i2c: Convert all new-style drivers to use module aliasing   Jean Delvare
• [PATCH POWERPC] i2c: adds support for i2c bus on Frescale CPM1/CPM2 controllers   Jean Delvare
• [PATCHv2] i2c: adds support for i2c bus on Frescale CPM1/CPM2 controllers   Jean Delvare
• [PATCHv2] i2c: adds support for i2c bus on Frescale CPM1/CPM2 controllers   Jean Delvare
• [MPC5200] problem running FEC and ATA   Wolfgang Denk
• [PATCH] [POWERPC] Update TQM5200, CM5200 and Motion-PRO _defconfig and .dts files   Wolfgang Denk
• [MPC5200] problem running FEC and ATA   Wolfgang Denk
• [MPC5200] problem running FEC and ATA   Wolfgang Denk
• [2.6.24 patch] Fix Cell OProfile support   Mathieu Desnoyers
• [ofa-general] [PATCH] IB/ehca: Forward event client-reregister-required to registered clients   Roland Dreier
• [PATCH 4/4] IB/ehca: Prevent RDMA-related connection failures   Roland Dreier
• Reminder: removal of arch/ppc   Roland Dreier
• Reminder: removal of arch/ppc   Roland Dreier
• [PATCH] IB/ehca: Prevent sending UD packets to QP0   Roland Dreier
• [PATCH 2/2] IB/ehca: Add PMA support   Roland Dreier
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Michel Dänzer
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Michel Dänzer
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Michel Dänzer
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Michel Dänzer
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Michel Dänzer
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Michel Dänzer
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Michel Dänzer
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Michel Dänzer
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Michel Dänzer
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Michel Dänzer
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Michel Dänzer
• [PATCH][POWERPC] Workaround for iommu page alignment   Michael Ellerman
• [PATCH 3/8] pseries: phyp dump: reserve-release proof-of-concept   Michael Ellerman
• [PATCH 1/8] pseries: phyp dump: Docmentation   Michael Ellerman
• [PATCH 1/8] pseries: phyp dump: Docmentation   Michael Ellerman
• [PATCH 1/8] pseries: phyp dump: Docmentation   Michael Ellerman
• [PATCH 1/8] pseries: phyp dump: Docmentation   Michael Ellerman
• [PATCH 1/2] Make setjmp/longjmp code generic   Michael Ellerman
• [PATCH] Fake NUMA emulation for PowerPC (Take 2)   Michael Ellerman
• [PATCH] Fake NUMA emulation for PowerPC (Take 2)   Michael Ellerman
• [PATCH] Fake NUMA emulation for PowerPC (Take 2)   Michael Ellerman
• [PATCH] [POWERPC] Always hookup PHB IO resource even when empty   Michael Ellerman
• [PATCH 1/7] Set archdata.dma_data for direct DMA in cell_dma_dev_setup()   Michael Ellerman
• [PATCH 2/7] Add celleb_dma_dev_setup()   Michael Ellerman
• [PATCH 3/7] Use archdata.dma_data in dma_direct_ops and add the offset   Michael Ellerman
• [PATCH 4/7] Have cell use its own dma_direct_offset variable   Michael Ellerman
• [PATCH 5/7] Have celleb use its own dma_direct_offset variable   Michael Ellerman
• [PATCH 6/7] Remove the global dma_direct_offset   Michael Ellerman
• [PATCH 7/7] Remove bogus comment in dma_direct_alloc_coherent()   Michael Ellerman
• [PATCH] Make IOMMU code safe for > 132 GB of memory   Michael Ellerman
• [PATCH] Make IOMMU code safe for > 132 GB of memory   Michael Ellerman
• [PATCH 1/4] Search for and publish cell OF platform devices earlier   Michael Ellerman
• [PATCH 2/4] Create and hook up of_platform_device_shutdown   Michael Ellerman
• [PATCH 3/4] Convert axon_msi to an of_platform driver   Michael Ellerman
• [PATCH 4/4] Avoid DMA exception when using axon_msi with IOMMU   Michael Ellerman
• [PATCH 1/4] Search for and publish cell OF platform devices earlier   Michael Ellerman
• [PATCH 2/4] Create and hook up of_platform_device_shutdown   Michael Ellerman
• [PATCH 3/4] Convert axon_msi to an of_platform driver   Michael Ellerman
• [PATCH 4/4] Avoid DMA exception when using axon_msi with IOMMU   Michael Ellerman
• [PATCH 1/3] Add set_dma_ops() to match get_dma_ops().   Michael Ellerman
• [PATCH 3/3] Cell IOMMU static mapping support   Michael Ellerman
• [PATCH 2/3] Allocate the hash table under 1G on cell   Michael Ellerman
• Patches added to for-2.6.25/master branches of powerpc.git   Michael Ellerman
• Patches added to for-2.6.25/master branches of powerpc.git   Michael Ellerman
• [PATCH powerpc] Fake NUMA emulation for PowerPC (Take 3)   Michael Ellerman
• [PATCH 1/1][PPC] Test value, not 1 in print_insn_spu(), arch/powerpc/xmon/spu-dis.c   Michael Ellerman
• [PATCH 1/8] Add set_dma_ops() to match get_dma_ops().   Michael Ellerman
• [PATCH 3/8] Split out the logic that allocates struct iommus   Michael Ellerman
• [PATCH 2/8] Allocate the hash table under 1G on cell   Michael Ellerman
• [PATCH 4/8] Split cell_iommu_setup_hardware() into two parts   Michael Ellerman
• [PATCH 6/8] Add support to cell_iommu_setup_page_tables() for multiple windows   Michael Ellerman
• [PATCH 5/8] Split out the IOMMU logic from cell_dma_dev_setup()   Michael Ellerman
• [PATCH 7/8] Split out the ioid fetching/checking logic   Michael Ellerman
• [PATCH 8/8] Cell IOMMU fixed mapping support   Michael Ellerman
• [PATCH 8/8] Cell IOMMU fixed mapping support   Michael Ellerman
• [PATCH 8/8] Cell IOMMU fixed mapping support   Michael Ellerman
• [PATCH 8/8] Cell IOMMU fixed mapping support   Michael Ellerman
• ppc64 vecemu compile failure   Michael Ellerman
• [PATCH] hide kernel only code in asm-powerpc/elf.h   Michael Ellerman
• [PATCH] [POWERPC] Set dma_data correctly for direct_ops on pasemi   Michael Ellerman
• crash in kmem_cache_init   Pekka Enberg
• crash in kmem_cache_init   Pekka Enberg
• crash in kmem_cache_init   Pekka Enberg
• [PATCH] Fix boot problem in situations where the boot CPU is running on a memoryless node   Pekka Enberg
• [PATCH] Fix boot problem in situations where the boot CPU is running on a memoryless node   Pekka J Enberg
• [PATCH] Fix boot problem in situations where the boot CPU is running on a memoryless node   Pekka J Enberg
• [PATCH] Fix boot problem in situations where the boot CPU is running on a memoryless node   Pekka J Enberg
• [PATCH] Fix boot problem in situations where the boot CPU is running on a memoryless node   Pekka J Enberg
• [PATCH] Fix boot problem in situations where the boot CPU is running on a memoryless node   Pekka J Enberg
• [PATCH] [POWERPC]: constify function pointer tables   Jan Engelhardt
• [PATCH] powerpc: export copy_page() on 32bit   Joseph Fannin
• [PATCH] add modalias info to mv643xx_eth.ko   Dale Farnsworth
• [PATCH 05/10] powerpc: Add crash kernel support for 85xx   Dale Farnsworth
• [PATCH 1/2] Add flash node to mpc8641_hpcn.dts   Wade Farnsworth
• [PATCH 2/2] MPC8641 HPCN: publish all soc and flash devices   Wade Farnsworth
• [PATCH 1/2] Add flash node to mpc8641_hpcn.dts   Wade Farnsworth
• [PATCH v2 1/2] Add localbus and flash nodes to mpc8641_hpcn.dts   Wade Farnsworth
• [PATCH v2 2/2] MPC8641 HPCN: call of_platform_bus_probe()   Wade Farnsworth
• [PATCH v2 1/2] Add localbus and flash nodes to mpc8641_hpcn.dts   Wade Farnsworth
• [PATCH] [POWERPC] make ibmebus use of_(un)register_driver   Joachim Fenkes
• [PATCH 0/4] IB/ehca: fixes, port connectivity autodetection, problem workaround   Joachim Fenkes
• [PATCH 1/4] IB/ehca: Remove CQ-QP-link before destroying QP in error path of create_qp()   Joachim Fenkes
• [PATCH 2/4] IB/ehca: Define array to store SMI/GSI QPs   Joachim Fenkes
• [PATCH 3/4] IB/ehca: Add "port connection autodetect mode"   Joachim Fenkes
• [PATCH 4/4] IB/ehca: Prevent RDMA-related connection failures   Joachim Fenkes
• [PATCH] IB/ehca: Prevent sending UD packets to QP0   Joachim Fenkes
• [PATCH 0/2] IB/ehca: PMA support and a minor fix   Joachim Fenkes
• [PATCH 1/2] IB/ehca: Update sma_attr also in case of disruptive config change   Joachim Fenkes
• [PATCH 2/2] IB/ehca: Add PMA support   Joachim Fenkes
• Trying 10/HALF   Andy Fleming
• psc and spi   S. Fricke
• psc and spi   S. Fricke
• [PATCH] [POWERPC] Update .gitignore files.   Jochen Friedrich
• [PATCH 4/5] Convert PowerPC MPC i2c to of_platform_driver from platform_driver   Jochen Friedrich
• [PATCHv2] i2c: adds support for i2c bus on Frescale CPM1/CPM2 controllers   Jochen Friedrich
• [PATCH/RFC] powerpc: DBox2 Board Support   Jochen Friedrich
• [PATCHv3] powerpc: DBox2 Board Support   Jochen Friedrich
• [i2c] [PATCH 0/5] Version 17, series to add device tree naming to i2c   Jochen Friedrich
• [PATCH/RFC] [POWERPC] CPM1: implement GPIO LIB API   Jochen Friedrich
• [PATCH/RFCv2] [POWERPC] Add support for freescale watchdog to CPM serial driver.   Jochen Friedrich
• [PATCH/RFCv2] wdt: Add support for PowerQUICC watchdog   Jochen Friedrich
• [PATCH/RFC] [POWERPC] CPM1: implement GPIO LIB API   Jochen Friedrich
• [PATCH/RFCv2] wdt: Add support for PowerQUICC watchdog   Jochen Friedrich
• Patches added to master/for-2.6.25 branch of powerpc.git   Jochen Friedrich
• [PATCH 0/7] [POWERPC] 8xx cleanups   Jochen Friedrich
• [PATCH 1/7] [POWERPC] Remove unused m8xx_cpm_hostalloc/free/dump()   Jochen Friedrich
• [PATCH 2/7] [POWERPC] Rename m8xx_pic_init to mpc8xx_pics_init   Jochen Friedrich
• [PATCH 3/7] [POWERPC] Remove unneeded and misspelled prototype m8xx_calibrate_decr   Jochen Friedrich
• [PATCH 4/7] [POWERPC] Remove declaration of m8xx_pic_init.   Jochen Friedrich
• [PATCH 5/7] [POWERPC] Remove sysdev/commproc.h   Jochen Friedrich
• [PATCH 6/7] [POWERPC] Get rid of conditional includes of board specific setup   Jochen Friedrich
• [PATCH 7/7] [POWERPC] Rename commproc to cpm1 and cpm2_common.c to cpm2.c   Jochen Friedrich
• [PATCH/RFCv2] [POWERPC] Add support for freescale watchdog to CPM serial driver.   Jochen Friedrich
• [PATCH/RFCv2] [POWERPC] Add support for freescale watchdog to CPM serial driver.   Jochen Friedrich
• [PATCH/RFCv2] [POWERPC] Add support for freescale watchdog to CPM serial driver.   Jochen Friedrich
• [PATCH/RFCv3] [POWERPC] Add support for freescale watchdog to CPM serial driver.   Jochen Friedrich
• patches for 2.6.25   Jochen Friedrich
• [PATCHv2] i2c: adds support for i2c bus on Frescale CPM1/CPM2 controllers   Jochen Friedrich
• [PATCHv2 0/8] [POWERPC] 8xx cleanups   Jochen Friedrich
• [PATCHv2 1/8] [POWERPC] Remove unused m8xx_cpm_hostalloc/free/dump()   Jochen Friedrich
• [PATCHv2 2/8] [POWERPC] Rename m8xx_pic_init to mpc8xx_pics_init   Jochen Friedrich
• [PATCHv2 3/8] [POWERPC] Remove unneeded and misspelled prototype m8xx_calibrate_decr   Jochen Friedrich
• [PATCHv2 4/8] [POWERPC] Remove declaration of m8xx_pic_init.   Jochen Friedrich
• [PATCHv2 5/8] [POWERPC] Remove sysdev/commproc.h   Jochen Friedrich
• [PATCHv2 6/8] [POWERPC] Get rid of conditional includes of board specific setup   Jochen Friedrich
• [PATCHv2 7/8] [POWERPC] Rename commproc to cpm1 and cpm2_common.c to cpm2.c   Jochen Friedrich
• [PATCHv2 8/8] [POWERPC] Move definition of buffer descriptor to cpm.h   Jochen Friedrich
• [PATCHv2 5/8] [POWERPC] Remove sysdev/commproc.h   Jochen Friedrich
• [PATCHv3 0/7] [POWERPC] 8xx cleanups   Jochen Friedrich
• [PATCHv3 1/7] [POWERPC] Remove unused m8xx_cpm_hostalloc/free/dump()   Jochen Friedrich
• [PATCHv3 2/7] [POWERPC] Rename m8xx_pic_init to mpc8xx_pics_init   Jochen Friedrich
• [PATCHv3 3/7] [POWERPC] Remove unneeded and misspelled prototype m8xx_calibrate_decr   Jochen Friedrich
• [PATCHv3 4/7] [POWERPC] Remove sysdev/commproc.h   Jochen Friedrich
• [PATCHv3 5/7] [POWERPC] Get rid of conditional includes of board specific setup   Jochen Friedrich
• [PATCHv3 6/7] [POWERPC] Rename commproc to cpm1 and cpm2_common.c to cpm2.c   Jochen Friedrich
• [PATCHv3 7/7] [POWERPC] Move definition of buffer descriptor to cpm.h   Jochen Friedrich
• [PATCHv3 6/7] [POWERPC] Rename commproc to cpm1 and cpm2_common.c to cpm2.c   Jochen Friedrich
• [PATCH for-2.6.25] [POWERPC] Rename commproc to cpm1 and cpm2_common.c to cpm2.c   Jochen Friedrich
• [PATCH] [NET]: Remove PowerPC code from fec.c   Jochen Friedrich
• [PATCH] [NET]: Remove PowerPC code from fec.c   Jochen Friedrich
• [PATCHv3 2.6.25] i2c: adds support for i2c bus on Freescale CPM1/CPM2 controllers   Jochen Friedrich
• [PATCH 3/3] [POWERPC] QE: implement GPIO LIB API   Jochen Friedrich
• [PATCHv3 2.6.25] i2c: adds support for i2c bus on Freescale CPM1/CPM2 controllers   Jochen Friedrich
• [RFC] [POWERPC] bootwrapper: build multiple cuImages   Jochen Friedrich
• [PATCHv4 2.6.25] i2c: adds support for i2c bus on Freescale CPM1/CPM2 controllers   Jochen Friedrich
• [PATCH/RFC] [POWERPC] Add i2c pins to dts and board setup   Jochen Friedrich
• [PATCH] enable built-in networking for Sequoia defconfig   Matthias Fuchs
• [PATCH] enable built-in networking for Sequoia defconfig   Matthias Fuchs
• [PATCH] enable built-in networking for Sequoia defconfig   Matthias Fuchs
• PCI interrupt assignment on sequoia board   Matthias Fuchs
• Reminder: removal of arch/ppc   Matthias Fuchs
• [PATCH] powerpc: Add MPC837x PCIE controller RC mode support   Kumar Gala
• [PATCH] add MPC837x MDS board default device tree   Kumar Gala
• How complete should the DTS be?   Kumar Gala
• [PATCH/RFC] mpc83xx/85xx SysRQ/brk over 8250 console   Kumar Gala
• [PATCH] sbc85xx: remove PCI exclude device for sbc8548/sbc8560   Kumar Gala
• [PATCH] Fix remainder calculating bug in single floating point division   Kumar Gala
• [PATCH] Fix remainder calculating bug in single floating point division   Kumar Gala
• [PATCH] Fix carry bug in 128-bit unsigned integer adding   Kumar Gala
• [PATCH 1/3] add default device trees for MPC837x MDS board   Kumar Gala
• [PATCH 1/3] add default device trees for MPC837x MDS board   Kumar Gala
• [PATCH] Fix remainder calculating bug in single floating pointdivision   Kumar Gala
• [PATCH] [POWERPC] Fix handling of memreserve if the range lands in highmem   Kumar Gala
• [PATCH] [POWERPC] Fix handling of memreserve if the range lands in highmem   Kumar Gala
• [PATCH] [POWERPC] Fix handling of memreserve if the range lands in highmem   Kumar Gala
• [PATCH] [POWERPC] Fix handling of memreserve if the range lands in highmem   Kumar Gala
• [PATCH v2] Fix handling of memreserve if the range lands in highmem   Kumar Gala
• PCI Failed to allocate mem for PCI ROM   Kumar Gala
• PCI Failed to allocate mem for PCI ROM   Kumar Gala
• PCI Failed to allocate mem for PCI ROM   Kumar Gala
• RFC: Only deal with apple fix if res is memory   Kumar Gala
• PCI Failed to allocate mem for PCI ROM   Kumar Gala
• RFC: Only deal with apple fix if res is memory   Kumar Gala
• [PATCH] fsl_soc: Fix get_immrbase() to use ranges, rather than reg.   Kumar Gala
• [PATCH] [POWERPC] Ensure we only handle PowerMac PCI bus fixup for memory resources   Kumar Gala
• [PATCH] [POWERPC] Fixup transparent P2P resources   Kumar Gala
• [PATCH] [POWERPC] FSL: Rework PCI/PCIe support for 85xx/86xx   Kumar Gala
• [PATCH] [POWERPC] Remove update_bridge_resource   Kumar Gala
• [PATCH] [POWERPC] Fixup use of phys_addr_t in mpic code   Kumar Gala
• [PATCH 1/3] 8xx: Analogue & Micro Adder875 board support.   Kumar Gala
• [PATCH 4/7] sbc8560: Add device tree source for Wind River SBC8560 board   Kumar Gala
• [PATCH 1/3] sbc834x: Add support for Wind River SBC834x boards   Kumar Gala
• [PATCH] [SERIAL] qe-uart: add support for Freescale QUICCEngine UART   Kumar Gala
• [PATCH] Fix carry bug in 128-bit unsigned integer adding   Kumar Gala
• [PATCH] [SERIAL] qe-uart: add support for Freescale QUICCEngine UART   Kumar Gala
• [PATCH] [POWERPC] bootwrapper: Add find_node_by_alias and dt_fixup_mac_address_by_alias   Kumar Gala
• [PATCH] [POWERPC] bootwrapper: convert cuboot-8{3,5}xx to dt_fixup_mac_address_by_alias   Kumar Gala
• [PATCH] [POWERPC] 85xx: convert boards to use machine_device_initcall   Kumar Gala
• [PATCH] [POWERPC] 83xx: convert boards to use machine_device_initcall   Kumar Gala
• [PATCH] fsl_soc: Fix get_immrbase() to use ranges, rather than reg.   Kumar Gala
• [PATCH] [POWERPC] bootwrapper: Add find_node_by_alias and dt_fixup_mac_address_by_alias   Kumar Gala
• [PATCH/RFCv2] wdt: Add support for PowerQUICC watchdog   Kumar Gala
• Patches added to master/for-2.6.25 branch of powerpc.git   Kumar Gala
• [PATCH/RFCv2] wdt: Add support for PowerQUICC watchdog   Kumar Gala
• L3CR   Kumar Gala
• [PATCH] [POWERPC] Fix incorrect interrupt map on FSL reference boards   Kumar Gala
• [PATCH] Convert MPC837x device trees to dts-v1   Kumar Gala
• [PATCH 1/3] add default device trees for MPC837x MDS board   Kumar Gala
• [PATCH 2/3 v2] add MPC837x USB platform support   Kumar Gala
• [PATCH 3/3 v2] USB device tree cleanups   Kumar Gala
• [PATCH] Convert MPC837x device trees to dts-v1   Kumar Gala
• [PATCH 1/3] [NET] phy/fixed.c: rework to not duplicate PHY layer functionality   Kumar Gala
• [PATCH 3/3] [POWERPC] MPC8349E-mITX: Vitesse 7385 PHY is not connected to the MDIO bus   Kumar Gala
• [PATCH 2/3] [POWERPC] fsl_soc: add support for gianfar for fixed-link property   Kumar Gala
• [PATCH v7] qe: add ability to upload QE firmware   Kumar Gala
• [PATCH v2] [SERIAL] qe-uart: add support for Freescale QUICCEngine UART   Kumar Gala
• [PATCH] [POWERPC] qe: add support for Freescale QUICCEngine UART   Kumar Gala
• [PATCH v3] [POWERPC] Update MPC8610 HPCD to support audio drivers   Kumar Gala
• [Add mpc5121 support PATCH v3 1/8] Add IPIC config option   Kumar Gala
• [Add mpc5121 support PATCH v3 2/8] Add mpc512x ipic support   Kumar Gala
• [PATCH] Fix carry bug in 128-bit unsigned integer adding   Kumar Gala
• [PATCH] mpc85xx_ads: add in missing of_node_put()   Kumar Gala
• [alsa-devel] [PATCH v3] [POWERPC] Update MPC8610 HPCD to support audio drivers   Kumar Gala
• [PATCH v4] [POWERPC] Update MPC8610 HPCD to support audio drivers   Kumar Gala
• [PATCH/RFCv2] [POWERPC] Add support for freescale watchdog to CPM serial driver.   Kumar Gala
• [PATCH] fsl_soc: Fix get_immrbase() to use ranges, rather than reg.   Kumar Gala
• [PATCH/RFCv2] [POWERPC] Add support for freescale watchdog to CPM serial driver.   Kumar Gala
• [PATCH 05/10] powerpc: Add crash kernel support for 85xx   Kumar Gala
• [PATCH 05/10] powerpc: Add crash kernel support for 85xx   Kumar Gala
• [PATCH 1/2] 8xx: Analogue & Micro Adder875 board support.   Kumar Gala
• [PATCH 2/2] mpc82xx: Embedded Planet EP8248E support   Kumar Gala
• [PATCH 1/3] mpc8313erdb: Add NAND to device tree, and call of_platform_bus_probe().   Kumar Gala
• [PATCH 3/3] Update mpc8313erdb defconfig for MTD, NAND, JFFS2.   Kumar Gala
• [PATCH 2/3] mpc8313erdb: Add NOR flash to the device tree.   Kumar Gala
• Please pull from 'for-2.6.25' branch   Kumar Gala
• patches for 2.6.25   Kumar Gala
• fixed phy support (warning related to FIXED_MII_100_FDX)   Kumar Gala
• [PATCH 2/2] [POWERPC] 8xxx and embedded6xx: Use machine_*_initcall() hooks in platform code   Kumar Gala
• [PATCH 2/2] [POWERPC] 8xxx and embedded6xx: Use machine_*_initcall() hooks in platform code   Kumar Gala
• [PATCH 1/2] Add flash node to mpc8641_hpcn.dts   Kumar Gala
• [PATCH 1/2] Add flash node to mpc8641_hpcn.dts   Kumar Gala
• [PATCH 2/2] MPC8641 HPCN: publish all soc and flash devices   Kumar Gala
• [PATCH] adder875: Fix flash bus-width and remove duplicate __initdata.   Kumar Gala
• [PATCH] adder875: Fix flash bus-width and remove duplicate __initdata.   Kumar Gala
• [PATCH v2 2/2] MPC8641 HPCN: call of_platform_bus_probe()   Kumar Gala
• [PATCH v2 1/2] Add localbus and flash nodes to mpc8641_hpcn.dts   Kumar Gala
• [PATCH v2 1/2] Add localbus and flash nodes to mpc8641_hpcn.dts   Kumar Gala
• [PATCH] [POWERPC] Add docs for Freescale DMA & DMA channel device tree nodes   Kumar Gala
• [PATCH] [POWERPC] Add docs for Freescale PowerQUICC SATA device tree nodes   Kumar Gala
• [PATCH] [POWERPC] Add docs for Freescale DMA & DMA channel device tree nodes   Kumar Gala
• [PATCH] [POWERPC] Add docs for Freescale DMA & DMA channel device tree nodes   Kumar Gala
• [PATCH] [POWERPC] Add docs for Freescale PowerQUICC SATA device tree nodes   Kumar Gala
• [PATCH v2 2/2] MPC8641 HPCN: call of_platform_bus_probe()   Kumar Gala
• [PATCH] [RAPIDIO] Fix compile error and warning   Kumar Gala
• [PATCH] [POWERPC] Move RapidIO support code from arch/ppc   Kumar Gala
• [PATCH] [POWERPC] Fix compile error if CONFIG_STX_GP3 is defined   Kumar Gala
• [PATCHv2 5/8] [POWERPC] Remove sysdev/commproc.h   Kumar Gala
• [PATCHv2 4/8] [POWERPC] Remove declaration of m8xx_pic_init.   Kumar Gala
• [PATCHv2 0/8] [POWERPC] 8xx cleanups   Kumar Gala
• mpc8568e-mds: pci-e is broken   Kumar Gala
• mpc8568e-mds: pci-e is broken   Kumar Gala
• [PATCH] [POWERPC] Move RapidIO support code from arch/ppc   Kumar Gala
• mpc8568e-mds: pci-e is broken   Kumar Gala
• [PATCH 1/2] [POWERPC] 8xx: Use machine_*_initcall() hooks in platform code   Kumar Gala
• [PATCH] [POWERPC] Add fixed-phy support for fs_enet   Kumar Gala
• [PATCH 0/4 v4] Add StorCenter port   Kumar Gala
• [PATCH 3/4 v4] POWERPC: Add initial iomega StorCenter board port.   Kumar Gala
• Please pull from 'for-2.6.25' branch   Kumar Gala
• patches for 2.6.25   Kumar Gala
• [PATCH] [POWERPC] Always build setup-bus.c on powerpc   Kumar Gala
• [PATCH] [POWERPC] Always build setup-bus.c on powerpc   Kumar Gala
• [PATCH v2][POWERPC] Always build setup-bus.c on powerpc   Kumar Gala
• [PATCH] [POWERPC] 85xx: Port STX GP3 board over from arch/ppc   Kumar Gala
• [PATCH 5/5 v3] Add the memory management driver to RapidIO.   Kumar Gala
• [PATCH 0/7] Powerpc support for SBC8560 board   Kumar Gala
• how to handle TARGET_CPM in cuboot-85xx?   Kumar Gala
• [PATCH 0/7] Powerpc support for SBC8560 board   Kumar Gala
• [PATCH 2/5] [POWERPC][NET] ucc_geth_mii and users: get rid of device_type   Kumar Gala
• [PATCH] [POWERPC] Add a cuboot wrapper for 85xx w/CPM2   Kumar Gala
• [PATCH] [POWERPC] 85xx: Port STX GP3 board over from arch/ppc   Kumar Gala
• [PATCH] [POWERPC] bootwrapper: Add find_node_by_compatible   Kumar Gala
• [PATCH v3] [POWERPC] Add a cuboot wrapper for 85xx with CPM2   Kumar Gala
• [PATCH v2] [POWERPC] 85xx: Port STX GP3 board over from arch/ppc   Kumar Gala
• [PATCH] [POWERPC] 85xx: Port TQM85xx boards over from arch/ppc   Kumar Gala
• [PATCH] [POWERPC] 82xx and embedded6xx: Use machine_*_initcall() hooks in platform code   Kumar Gala
• [PATCH] powerpc: reduce code duplication in legacy_serial, add UART parent types   Kumar Gala
• [PATCH 0/10] Support for SBC834x/8548/8560 Wind River Boards   Kumar Gala
• [PATCHv3 0/7] [POWERPC] 8xx cleanups   Kumar Gala
• [PATCHv3 6/7] [POWERPC] Rename commproc to cpm1 and cpm2_common.c to cpm2.c   Kumar Gala
• what's in my tree for 2.6.25   Kumar Gala
• [PATCH for-2.6.25] [POWERPC] Rename commproc to cpm1 and cpm2_common.c to cpm2.c   Kumar Gala
• [PATCHv3 7/7] [POWERPC] Move definition of buffer descriptor to cpm.h   Kumar Gala
• [PATCH] mpc834x_mds: Convert device tree source to dts-v1   Kumar Gala
• [PATCH 4/9] enable FSL SATA driver config for Freescale SoCs   Kumar Gala
• [PATCH 7/9] powerpc: add MPC837x RDB platform support   Kumar Gala
• [PATCH] mpc834x_mds: Convert device tree source to dts-v1   Kumar Gala
• [PATCH v2] [POWERPC] 85xx: Port STX GP3 board over from arch/ppc   Kumar Gala
• [PATCH 6/5] [POWERPC] get rid of `model = "UCC"' in the ucc nodes   Kumar Gala
• [PATCH 5/5] [POWERPC] fsl_soc, legacy_serial: add support for "soc" compatible matching   Kumar Gala
• [PATCH] [POWERPC] 85xx: some minor cleanups for stx_gp3 and tqm85xx   Kumar Gala
• Reminder: removal of arch/ppc   Kumar Gala
• [PATCH 1/5] [POWERPC] qe_lib and users: get rid of most device_types and model   Kumar Gala
• [PATCH 2/5] [POWERPC][NET] ucc_geth_mii and users: get rid of device_type   Kumar Gala
• [PATCH 3/5] [POWERPC][SPI] use brg-frequency for SPI in QE   Kumar Gala
• [PATCH 4/5] [POWERPC] fsl_spi_init and users: stop using device_type = "spi"   Kumar Gala
• [PATCH 1/9] powerpc: fold the mpc8313 platform into the mpc831x platform   Kumar Gala
• [PATCH 2/9] powerpc: add base platform support for the mpc8315 rdb board   Kumar Gala
• [PATCH 3/9] powerpc: Add the MPC8315E RDB dts   Kumar Gala
• [PATCH 4/9] enable FSL SATA driver config for Freescale SoCs   Kumar Gala
• [PATCH 5/9] powerpc: ipic: add interrupt vector 94   Kumar Gala
• [PATCH 6/9] add the mpc8315 rdb defconfig   Kumar Gala
• [PATCH 7/9] powerpc: add MPC837x RDB platform support   Kumar Gala
• [PATCH 8/9] powerpc: add the mpc837[789]_rdb dts files   Kumar Gala
• [PATCH 9/9] powerpc: add the mpc837x rdb defconfig   Kumar Gala
• Patches added to for-2.6.25/master branches of powerpc.git   Kumar Gala
• [PATCH] FIXED_MII_100_FDX   Kumar Gala
• [PATCH] [PPC] Remove 83xx from arch/ppc   Kumar Gala
• [PATCH] [PPC] Remove 85xx from arch/ppc   Kumar Gala
• [PATCH] POWERPC: Convert all 86xx DTS files to /dts-v1/ format.   Kumar Gala
• [PATCH] POWERPC: Convert StorCenter DTS file to /dts-v1/ format.   Kumar Gala
• [PATCH 1/9] qe/muram dts: Explicitly set address-cells and size cells for muram   Kumar Gala
• [PATCH 0/9] 83xx DTS fixes and v1 conversions   Kumar Gala
• Please pull from 'for-2.6.25' branch   Kumar Gala
• [PATCH] [POWERPC] 86xx: Remove unused IRQ defines   Kumar Gala
• [PATCH 0/9] 83xx DTS fixes and v1 conversions   Kumar Gala
• [PATCH] [POWERPC] 85xx: rework platform Kconfig   Kumar Gala
• [PATCH] [POWERPC] 83xx: rework platform Kconfig   Kumar Gala
• [PATCH] [POWERPC] 85xx: convert sbc85* boards to use machine_device_initcall   Kumar Gala
• [PATCHv3 2.6.25] i2c: adds support for i2c bus on Freescale CPM1/CPM2 controllers   Kumar Gala
• [PATCH] [POWERPC] 85xx: Only invalidate TLB0 and TLB1   Kumar Gala
• Please pull from 'for-2.6.25' branch (updated)   Kumar Gala
• [PATCH] powerpc: fix typo in mpc837x compatible entries   Kumar Gala
• [PATCH] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.   Kumar Gala
• [PATCH] [POWERPC] 85xx: some minor cleanups for stx_gp3 and tqm85xx   Kumar Gala
• [PATCH 3/6] Move include/asm-ppc/rio.h to include/asm-powerpc/rio.h   Kumar Gala
• PCI configuration with multiple PCI controllers   Kumar Gala
• [PATCH 4/6] Add multi mport support.   Kumar Gala
• [PATCH 1/6] Change RIO function mpc85xx_ to fsl_ .   Kumar Gala
• [PATCH] [NET] cpmac: convert to new Fixed PHY infrastructure (was: Re: fixed phy support (warning related to FIXED_MII_100_FDX))   Kumar Gala
• [PATCH] powerpc: configure USB clock for MPC8315E   Kumar Gala
• [PATCH v2] powerpc: configure USB clock for MPC8315E   Kumar Gala
• [PATCH] [NET] cpmac: convert to new Fixed PHY infrastructure   Kumar Gala
• [PATCH] [NET] cpmac: convert to new Fixed PHY infrastructure   Kumar Gala
• git tree rebased   Kumar Gala
• [PATCH] [NET] cpmac: convert to new Fixed PHY infrastructure (was: Re: fixed phy support (warning related to FIXED_MII_100_FDX))   Kumar Gala
• [PATCH v3] powerpc: configure USB clock for MPC8315E   Kumar Gala
• [PATCH 1/6] Change RIO function mpc85xx_ to fsl_ .   Kumar Gala
• [PATCH 4/6] Add multi mport support.   Kumar Gala
• [PATCH 4/6] Add multi mport support.   Kumar Gala
• [PATCH for 2.6.24][NET] fs_enet: check for phydev existence in the ethtool handlers   Jeff Garzik
• [PATCH] [POWERPC] pasemi: Move electra-ide to pata_of_platform   Jeff Garzik
• [PATCH] [NET]: Remove PowerPC code from fec.c   Jeff Garzik
• [PATCH] [NET] cpmac: convert to new Fixed PHY infrastructure   Jeff Garzik
• [PATCH] [NET] cpmac: convert to new Fixed PHY infrastructure   Jeff Garzik
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   David Gibson
• [PATCH] [POWERPC] Update .gitignore files.   David Gibson
• [PATCHv3] powerpc: DBox2 Board Support   David Gibson
• Enable RTC for Ebony and Walnut   David Gibson
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   David Gibson
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   David Gibson
• Outstanding DTC patches?   David Gibson
• [PATCH] powerpc: #address-cells & #size-cells properties not inherited   David Gibson
• [DTC] small ftdump cleanup patch   David Gibson
• [PATCHv3] powerpc: DBox2 Board Support   David Gibson
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   David Gibson
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   David Gibson
• Outstanding DTC patches?   David Gibson
• [PATCH 1/3] Add yyerrorf() for formatted error messages.   David Gibson
• [PATCH 2/3] Look for include files in the directory of the including file.   David Gibson
• [PATCH 3/3] Return a non-zero exit code if an error occurs during dts parsing.   David Gibson
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   David Gibson
• [PATCH 1/3] Add support for binary includes.   David Gibson
• [PATCH] MTD for Taco   David Gibson
• [PATCH] i2c-ibm_iic driver   David Gibson
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   David Gibson
• [PATCH 2/3] Handle absolute pathnames correctly in dtc_open_file.   David Gibson
• [PATCH] MTD for Taco   David Gibson
• [DTC PATCH 1/2] Convert malloc() uses to xmalloc().   David Gibson
• [PATCH 1/3] add default device trees for MPC837x MDS board   David Gibson
• [PATCH] Fix remainder calculating bug in single floating point division   David Gibson
• [PATCH 2/3] sbc834x: Add device tree source for Wind River SBC834x board.   David Gibson
• [PATCH 4/7] Device tree for MPC5121 ADS   David Gibson
• [PATCH 2/5] Warp Base Platform - dts   David Gibson
• [PATCH 3/5] Warp Base Platform   David Gibson
• [PATCH 4/7] sbc8560: Add device tree source for Wind River SBC8560 board   David Gibson
• How complete should the DTS be?   David Gibson
• [PATCH 3/5] Warp Base Platform   David Gibson
• [PATCH 2/5] Warp Base Platform - dts   David Gibson
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   David Gibson
• [PATCH 2/3] Look for include files in the directory of the including file.   David Gibson
• [PATCH 3/3] Return a non-zero exit code if an error occurs during dts parsing.   David Gibson
• [DTC PATCH 2/2] Preserve scanner state when /include/ing.   David Gibson
• [PATCH 2/3] Handle absolute pathnames correctly in dtc_open_file.   David Gibson
• How complete should the DTS be?   David Gibson
• [PATCH 2/5] Warp Base Platform - dts   David Gibson
• Enable RTC for Ebony and Walnut (v2)   David Gibson
• libfdt: Add fdt_set_name() function   David Gibson
• [PATCH 2/5] Warp Base Platform - dts   David Gibson
• [PATCH 1/3] 8xx: Analogue & Micro Adder875 board support.   David Gibson
• Enable RTC for Ebony and Walnut (v2)   David Gibson
• I2C and CAN bus on MPC5200B device tree   David Gibson
• [PATCH 3/4] powerpc: Katana750i - Add DTS file   David Gibson
• [DTC PATCH] libfdt: Add ft_get_next_node(), ft_get_next_prop(), and ft_getprop_offset().   David Gibson
• [PATCH] [POWERPC] bootwrapper: Add find_node_by_alias and dt_fixup_mac_address_by_alias   David Gibson
• [PATCH 3/4] powerpc: Katana750i - Add DTS file   David Gibson
• [PATCH 2/2] [POWERPC] 4xx: Add AMCC Haleakala (405EXr) dts   David Gibson
• [DTC PATCH] libfdt: Add ft_get_next_node(), ft_get_next_prop(), and ft_getprop_offset().   David Gibson
• [PATCH 2/2] [POWERPC] 4xx: Add AMCC Haleakala (405EXr) dts   David Gibson
• [libfdt] RFC: Node iterators   David Gibson
• [DTC PATCH] libfdt: Add ft_get_next_node(), ft_get_next_prop(), and ft_getprop_offset().   David Gibson
• [PATCH] net: NEWEMAC: Remove "rgmii-interface" from rgmii matching table   David Gibson
• [PATCH] [POWERPC] 4xx: Remove "i2c" and "xxmii-interface" device_types from dts   David Gibson
• [Add mpc5121 support PATCH v2 2/8] Add mpc512x ipic support   David Gibson
• [PATCH 3/4] powerpc: Katana750i - Add DTS file   David Gibson
• [PATCH 4/4 v2] powerpc: Katana750i - Add platform support   David Gibson
• [libfdt] RFC: Node iterators (v2)   David Gibson
• [PATCH] [POWERPC] 85xx: some minor cleanups for stx_gp3 and tqm85xx   David Gibson
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Liam Girdwood
• [PATCH 0/2] ASoC drivers for the Freescale MPC8610 SoC   Liam Girdwood
• [PATCH v2] [POWERPC] Update MPC8610 HPCD to support audio drivers   Liam Girdwood
• [PATCH v2] [ALSA] Add ASoC drivers for the Freescale MPC8610 SoC   Liam Girdwood
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Liam Girdwood
• [PATCh v3] powerpc: add hugepagesz boot-time parameter   Mel Gorman
• crash in kmem_cache_init   Mel Gorman
• crash in kmem_cache_init   Mel Gorman
• crash in kmem_cache_init   Mel Gorman
• crash in kmem_cache_init   Mel Gorman
• crash in kmem_cache_init   Mel Gorman
• crash in kmem_cache_init   Mel Gorman
• crash in kmem_cache_init   Mel Gorman
• [PATCH] Fix boot problem in situations where the boot CPU is running on a memoryless node   Mel Gorman
• [PATCH] Fix boot problem in situations where the boot CPU is running on a memoryless node   Mel Gorman
• [PATCH] Fix boot problem in situations where the boot CPU is running on a memoryless node   Mel Gorman
• [PATCH] mpc85xx_ads: add in missing of_node_put()   Paul Gortmaker
• [DTC] small ftdump cleanup patch   Paul Gortmaker
• [DTC] small ftdump cleanup patch   Paul Gortmaker
• [PATCH 0/7] Powerpc support for SBC8560 board   Paul Gortmaker
• [PATCH 1/7] powerpc: use for_each in legacy_serial   Paul Gortmaker
• [PATCH 2/7] powerpc: allow localbus compatible serial ports for console device   Paul Gortmaker
• [PATCH 3/7] sbc8560: add support for Wind River SBC8560 in arch/powerpc   Paul Gortmaker
• [PATCH 4/7] sbc8560: Add device tree source for Wind River SBC8560 board   Paul Gortmaker
• [PATCH 5/7] sbc8560: Convert WRS SBC8560 device tree to v1 format   Paul Gortmaker
• [PATCH 6/7] CPM2: Make support for the CPM2 optional on 8560 based boards   Paul Gortmaker
• [PATCH 7/7] sbc8560: Add default .config file for Wind River SBC8560   Paul Gortmaker
• [PATCH 2/7] powerpc: allow localbus compatible serial ports for console device   Paul Gortmaker
• [PATCH 1/3] sbc8548: Add basic support for Wind River SBC8548 as powerpc   Paul Gortmaker
• [PATCH] sbc85xx: remove PCI exclude device for sbc8548/sbc8560   Paul Gortmaker
• [PATCH/RFC] mpc83xx/85xx SysRQ/brk over 8250 console   Paul Gortmaker
• [PATCH 3/7] sbc8560: add support for Wind River SBC8560 in arch/powerpc   Paul Gortmaker
• [PATCH 0/5] Powerpc support for SBC8548 board   Paul Gortmaker
• [PATCH 1/5] sbc8548: Add basic support for Wind River SBC8548 as powerpc   Paul Gortmaker
• [PATCH 2/5] sbc8548: Add device tree source for Wind River SBC8548 board   Paul Gortmaker
• [PATCH 3/5] sbc8548: Add default .config file for Wind River SBC8548   Paul Gortmaker
• [PATCH 4/5] sbc8548: Convert device tree to be dts-v1 compatible   Paul Gortmaker
• [PATCH 5/5] sbc85xx: remove PCI exclude device for sbc8548/sbc8560   Paul Gortmaker
• [PATCH 0/3] Powerpc support for SBC834x board   Paul Gortmaker
• [PATCH 1/3] sbc834x: Add support for Wind River SBC834x boards   Paul Gortmaker
• [PATCH 2/3] sbc834x: Add device tree source for Wind River SBC834x board.   Paul Gortmaker
• [PATCH 3/3] sbc834x: Add default config file for Wind River SBC8349 board   Paul Gortmaker
• [PATCH 4/7] sbc8560: Add device tree source for Wind River SBC8560 board   Paul Gortmaker
• [PATCH 2/7] powerpc: allow localbus compatible serial ports for console device   Paul Gortmaker
• [PATCH 0/7] Powerpc support for SBC8560 board   Paul Gortmaker
• [PATCH 0/7] Powerpc support for SBC8560 board   Paul Gortmaker
• [PATCH] powerpc: reduce code duplication in legacy_serial, add UART parent types   Paul Gortmaker
• [PATCH] powerpc: reduce code duplication in legacy_serial, add UART parent types   Paul Gortmaker
• [PATCH 0/10] Support for SBC834x/8548/8560 Wind River Boards   Paul Gortmaker
• [PATCH 1/10] sbc8560: add support for Wind River SBC8560 in arch/powerpc   Paul Gortmaker
• [PATCH 2/10] sbc8560: Add v1 device tree source for Wind River SBC8560 board   Paul Gortmaker
• [PATCH 3/10] CPM2: Make support for the CPM2 optional on 8560 based boards   Paul Gortmaker
• [PATCH 4/10] sbc8560: Add default .config file for Wind River SBC8560   Paul Gortmaker
• [PATCH 5/10] sbc8548: Add basic support for Wind River SBC8548 as powerpc   Paul Gortmaker
• [PATCH 6/10] sbc8548: Add v1 device tree source for Wind River SBC8548 board   Paul Gortmaker
• [PATCH 7/10] sbc8548: Add default .config file for Wind River SBC8548   Paul Gortmaker
• [PATCH 8/10] sbc834x: Add support for Wind River SBC834x boards   Paul Gortmaker
• [PATCH 9/10] sbc834x: Add device tree source for Wind River SBC834x board.   Paul Gortmaker
• [PATCH 10/10] sbc834x: Add default config file for Wind River SBC8349 board   Paul Gortmaker
• [PATCH 3/10] CPM2: Make support for the CPM2 optional on 8560 based boards   Paul Gortmaker
• [PATCH] mpc834x_mds: Convert device tree source to dts-v1   Paul Gortmaker
• [PATCH] qe/muram dts: Explicitly set address-cells and size cells for muram   Paul Gortmaker
• [PATCH] 5200 dts: add default address and size cells to soc node.   Paul Gortmaker
• [PATCH 0/9] 83xx DTS fixes and v1 conversions   Paul Gortmaker
• [PATCH 1/9] qe/muram dts: Explicitly set address-cells and size cells for muram   Paul Gortmaker
• [PATCH 2/9] mpc834x_mds: Convert device tree source to dts-v1   Paul Gortmaker
• [PATCH 3/9] sbc8349: convert human parseable DTS properties to decimal   Paul Gortmaker
• [PATCH 4/9] mpc836x: Convert mpc836x_mds to dts-v1 format.   Paul Gortmaker
• [PATCH 5/9] mpc832x_mds: Convert mpc832x_mds to dts-v1 format.   Paul Gortmaker
• [PATCH 6/9] mpc832x_rdb: Convert mpc832x_rdb to dts-v1 format.   Paul Gortmaker
• [PATCH 7/9] 8349mitx: Convert mpc8349e-mitx to dts-v1 format.   Paul Gortmaker
• [PATCH 8/9] 8349mitxgp: Convert mpc8349e MITX GP to dts-v1 format.   Paul Gortmaker
• [PATCH 9/9] 8313rdb: Convert mpc8313 RDB to dts-v1 format.   Paul Gortmaker
• [PATCH 1/9] qe/muram dts: Explicitly set address-cells and size cells for muram   Paul Gortmaker
• [PATCH 0/9] 83xx DTS fixes and v1 conversions   Paul Gortmaker
• [PATCH 0/9] 83xx DTS fixes and v1 conversions   Paul Gortmaker
• [PATCH] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.   Paul Gortmaker
• [PATCH] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.   Paul Gortmaker
• [-mm PATCH] updates for hotplug memory remove   Yasunori Goto
• [-mm PATCH] updates for hotplug memory remove   Yasunori Goto
• I2C and CAN bus on MPC5200B device tree   Wolfgang Grandegger
• [PATCH] powerpc: #address-cells & #size-cells properties not inherited   Mark A. Greer
• [PATCH] powerpc: #address-cells & #size-cells properties not inherited   Mark A. Greer
• [PATCH v2] powerpc: #address-cells & #size-cells properties not inherited   Mark A. Greer
• [PATCH 1/4] powerpc: mv64x60 - Use early_* PCI accessors for hotswap reg   Mark A. Greer
• [PATCH 2/4] powerpc: mv64x60 - Exit when no hs_reg_valid property   Mark A. Greer
• [PATCH 3/4] powerpc: Katana750i - Add DTS file   Mark A. Greer
• [PATCH 4/4] powerpc: Katana750i - Add platform support   Mark A. Greer
• [PATCH 1/4] powerpc: mv64x60 - Use early_* PCI accessors for hotswap reg   Mark A. Greer
• [PATCH 1/4] powerpc: mv64x60 - Use early_* PCI accessors for hotswap reg   Mark A. Greer
• [PATCH 4/4] powerpc: Katana750i - Add platform support   Mark A. Greer
• [PATCH 3/4] powerpc: Katana750i - Add DTS file   Mark A. Greer
• [PATCH 3/4] powerpc: Katana750i - Add DTS file   Mark A. Greer
• [PATCH 1/4 v2] powerpc: mv64x60 - Use early_* PCI accessors for hotswap reg   Mark A. Greer
• [PATCH 3/4 v2] powerpc: Katana750i - Add DTS file   Mark A. Greer
• [PATCH 4/4 v2] powerpc: Katana750i - Add platform support   Mark A. Greer
• [PATCH 4/4 v2] powerpc: Katana750i - Add platform support   Mark A. Greer
• [PATCH 1/4] powerpc: mv64x60 - Use early_* PCI accessors for hotswap reg   Mark A. Greer
• [PATCH 3/4] powerpc: Katana750i - Add DTS file   Mark A. Greer
• PCI Failed to allocate mem for PCI ROM   Grant Grundler
• Reminder: removal of arch/ppc   Zoltan HERPAI
• add phy-handle property for fec_mpc52xx   Olaf Hering
• [RFC] add phy-handle property for fec_mpc52xx   Olaf Hering
• add phy-handle property for fec_mpc52xx   Olaf Hering
• crash in kmem_cache_init   Olaf Hering
• crash in kmem_cache_init   Olaf Hering
• crash in kmem_cache_init   Olaf Hering
• crash in kmem_cache_init   Olaf Hering
• crash in kmem_cache_init   Olaf Hering
• crash in kmem_cache_init   Olaf Hering
• crash in kmem_cache_init   Olaf Hering
• [PATCH] add modalias info to mv643xx_eth.ko   Olaf Hering
• crash in kmem_cache_init   Olaf Hering
• [PATCH] revert chrp_pci_fixup_vt8231_ata devinit to fix libata on pegasos   Olaf Hering
• [PATCH] autodetect serial console on efika   Olaf Hering
• [PATCH] autodetect serial console on pegasos2   Olaf Hering
• [PATCH] autodetect serial console on efika   Olaf Hering
• [PATCH] create modalias file in sysfs for bus vio   Olaf Hering
• [PATCH] create modalias file in sysfs for bus of_platform   Olaf Hering
• [PATCH v2] create modalias file in sysfs for bus of_platform   Olaf Hering
• [PATCH v3] create modalias file in sysfs for bus of_platform   Olaf Hering
• crash in kmem_cache_init   Olaf Hering
• crash in kmem_cache_init   Olaf Hering
• crash in kmem_cache_init   Olaf Hering
• crash in kmem_cache_init   Olaf Hering
• crash in kmem_cache_init   Olaf Hering
• [PATCH] Fix boot problem in situations where the boot CPU is running on a memoryless node   Olaf Hering
• [PATCH] create modalias file in sysfs for bus vio   Olaf Hering
• [PATCH] hide kernel only code in asm-powerpc/elf.h   Olaf Hering
• [PATCH v4] create modalias file in sysfs for bus of_platform   Olaf Hering
• [PATCH 1/2] [POWERPC] smp_call_function_map should be static   Benjamin Herrenschmidt
• [PATCH 1/2] [POWERPC] smp_call_function_map should be static   Benjamin Herrenschmidt
• [PATCH 1/5] [POWERPC] powermac: Use machine_*_initcall() hooks in platform code   Benjamin Herrenschmidt
• [PATCH] Base Taco Platform support   Benjamin Herrenschmidt
• [PATCH] Hwmon for Taco   Benjamin Herrenschmidt
• [PATCH] Miscellaneous for Taco   Benjamin Herrenschmidt
• [PATCH] ibm_newemac: Increase number of default rx-/tx-buffers   Benjamin Herrenschmidt
• [PATCH] ibm_newemac: Increase number of default rx-/tx-buffers   Benjamin Herrenschmidt
• [PATCH] Miscellaneous for Taco   Benjamin Herrenschmidt
• [PATCH] ibm_newemac: Increase number of default rx-/tx-buffers   Benjamin Herrenschmidt
• [PATCH] Fix remainder calculating bug in single floating point division   Benjamin Herrenschmidt
• [PATCH] Fix remainder calculating bug in single floating point division   Benjamin Herrenschmidt
• [PATCH][POWERPC] Workaround for iommu page alignment   Benjamin Herrenschmidt
• [PATCH][POWERPC] Workaround for iommu page alignment   Benjamin Herrenschmidt
• [PATCH][POWERPC] Workaround for iommu page alignment (#2)   Benjamin Herrenschmidt
• [PATCH][POWERPC] Workaround for iommu page alignment (#2)   Benjamin Herrenschmidt
• [PATCH] Miscellaneous for Taco   Benjamin Herrenschmidt
• [RFC] add phy-handle property for fec_mpc52xx   Benjamin Herrenschmidt
• add phy-handle property for fec_mpc52xx   Benjamin Herrenschmidt
• How complete should the DTS be?   Benjamin Herrenschmidt
• RFC: Only deal with apple fix if res is memory   Benjamin Herrenschmidt
• [PATCH 0/2] [PPC 4xx] L2-cache synchronization for ppc44x   Benjamin Herrenschmidt
• [PATCH] ibm_newemac: Increase number of default rx-/tx-buffers   Benjamin Herrenschmidt
• [PATCH 0/2] [PPC 4xx] L2-cache synchronization for ppc44x   Benjamin Herrenschmidt
• [PATCH] ibm_newemac: Increase number of default rx-/tx-buffers   Benjamin Herrenschmidt
• Device Tree & PCI   Benjamin Herrenschmidt
• [PATCH] [POWERPC] Ensure we only handle PowerMac PCI bus fixup for memory resources   Benjamin Herrenschmidt
• [PATCH] [POWERPC] Fixup transparent P2P resources   Benjamin Herrenschmidt
• [PATCH] [POWERPC] Remove update_bridge_resource   Benjamin Herrenschmidt
• [PATCH] [POWERPC] Fixup use of phys_addr_t in mpic code   Benjamin Herrenschmidt
• [PATCH] net: NEWEMAC: Fix problem with mtu > 4080 on non TAH equipped 4xx PPC's   Benjamin Herrenschmidt
• [PATCH] net: NEWEMAC: Remove "rgmii-interface" from rgmii matching table   Benjamin Herrenschmidt
• [PATCH 1/4] powerpc: mv64x60 - Use early_* PCI accessors for hotswap reg   Benjamin Herrenschmidt
• [PATCH 1/4] powerpc: mv64x60 - Use early_* PCI accessors for hotswap reg   Benjamin Herrenschmidt
• [PATCH] net: NEWEMAC: Remove "rgmii-interface" from rgmii matching table   Benjamin Herrenschmidt
• [PATCH] [POWERPC] Always hookup PHB IO resource even when empty   Benjamin Herrenschmidt
• [PATCH 1/7] Set archdata.dma_data for direct DMA in cell_dma_dev_setup()   Benjamin Herrenschmidt
• [PATCH 2/7] Add celleb_dma_dev_setup()   Benjamin Herrenschmidt
• [PATCH 3/7] Use archdata.dma_data in dma_direct_ops and add the offset   Benjamin Herrenschmidt
• [PATCH 4/7] Have cell use its own dma_direct_offset variable   Benjamin Herrenschmidt
• [PATCH 4/7] Have cell use its own dma_direct_offset variable   Benjamin Herrenschmidt
• [PATCH 5/7] Have celleb use its own dma_direct_offset variable   Benjamin Herrenschmidt
• [PATCH 6/7] Remove the global dma_direct_offset   Benjamin Herrenschmidt
• [PATCH 7/7] Remove bogus comment in dma_direct_alloc_coherent()   Benjamin Herrenschmidt
• [PATCH] Various new ibm405 DCRN #defines   Benjamin Herrenschmidt
• [i2c] [PATCH 19 3/5] Clean up error returns   Benjamin Herrenschmidt
• [i2c] [PATCH 19 3/5] Clean up error returns   Benjamin Herrenschmidt
• [PATCH] Various new ibm405 DCRN #defines   Benjamin Herrenschmidt
• [PATCH] ppc: fix #ifdef-s in mediabay driver   Benjamin Herrenschmidt
• [PATCH 1/3 v3] Add StorCenter DTS first draft.   Benjamin Herrenschmidt
• [PATCH 0/6] PS3: gelic: gelic updates for 2.6.25   Benjamin Herrenschmidt
• [PATCH] ppc: fix #ifdef-s in mediabay driver   Benjamin Herrenschmidt
• [PATCH] [POWERPC] Always build setup-bus.c on powerpc   Benjamin Herrenschmidt
• [PATCH v2][POWERPC] Always build setup-bus.c on powerpc   Benjamin Herrenschmidt
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Benjamin Herrenschmidt
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Benjamin Herrenschmidt
• [i2c] [PATCH] mpc i2c driver, compare to NO_IRQ instead of zero   Benjamin Herrenschmidt
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Benjamin Herrenschmidt
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Benjamin Herrenschmidt
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Benjamin Herrenschmidt
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Benjamin Herrenschmidt
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Benjamin Herrenschmidt
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Benjamin Herrenschmidt
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Benjamin Herrenschmidt
• [Cbe-oss-dev] [PATCH 3/3] Cell IOMMU static mapping support   Benjamin Herrenschmidt
• [Cbe-oss-dev] [PATCH 3/3] Cell IOMMU static mapping support   Benjamin Herrenschmidt
• [Cbe-oss-dev] [PATCH 3/3] Cell IOMMU static mapping support   Benjamin Herrenschmidt
• [PATCH 8/8] Cell IOMMU fixed mapping support   Benjamin Herrenschmidt
• [PATCH] net: NEWEMAC: Remove "rgmii-interface" from rgmii matching table   Benjamin Herrenschmidt
• [alsa-devel] [PATCH v3] [POWERPC] Update MPC8610 HPCD to support audio drivers   Takashi Iwai
• How to write a device driver in such a fashion .????   Jenkins, Clive
• [PATCH] [2.6.24] Add PPC nvram ioctls to compat_ioctl   Olof Johansson
• [PATCH 1/2] [POWERPC] smp_call_function_map should be static   Olof Johansson
• [PATCH] powerpc: Add MPC837x PCIE controller RC mode support   Olof Johansson
• [PATCH] [POWERPC] pasemi: Fix NMI handling check   Olof Johansson
• [PATCH 3/5] [POWERPC] pasemi: Use machine_*_initcall() hooks in platform code   Olof Johansson
• Enable RTC for Ebony and Walnut   Olof Johansson
• [PATCH][POWERPC] Workaround for iommu page alignment   Olof Johansson
• [PATCH][POWERPC] Workaround for iommu page alignment (#2)   Olof Johansson
• [PATCH 3/7] Basic Freescale MPC512x support   Olof Johansson
• add phy-handle property for fec_mpc52xx   Olof Johansson
• [PATCH 2/3] [libata] pata_of_platform: OF-Platform PATA device driver   Olof Johansson
• [PATCH 1/8] pseries: phyp dump: Docmentation   Olof Johansson
• Platform matching style (was:: [RFC] add phy-handle property for fec_mpc52xx)   Olof Johansson
• [PATCH 1/8] pseries: phyp dump: Docmentation   Olof Johansson
• [alsa-devel] [PATCH v2] [ALSA] Add ASoC drivers for the Freescale MPC8610 SoC   Olof Johansson
• [PATCH 1/5] Warp Base Platform   Olof Johansson
• [PATCH 1/5] Warp Base Platform   Olof Johansson
• I2C and CAN bus on MPC5200B device tree   Olof Johansson
• [PATCH 1/8] pseries: phyp dump: Docmentation   Olof Johansson
• [PATCH v4 0/3] OF-platform PATA driver   Olof Johansson
• [PATCH] [POWERPC] pasemi: Move electra-ide to pata_of_platform   Olof Johansson
• Please pull pasemi.git for-2.6.25 branch   Olof Johansson
• Please pull pasemi.git for-2.6.25 branch   Olof Johansson
• [PATCH 1/2] [POWERPC] 4xx: Add 405EXr to cputable   Olof Johansson
• [PATCH 1/2] [POWERPC] 4xx: Add 405EXr to cputable   Olof Johansson
• Patches added to master/for-2.6.25 branch of powerpc.git   Olof Johansson
• [PATCH 1/2] Make setjmp/longjmp code generic   Olof Johansson
• 2.6.24-rc8-mm1 powerpc build errors   Olof Johansson
• [PATCH] [POWERPC] Update TQM5200, CM5200 and Motion-PRO _defconfig and .dts files   Olof Johansson
• [i2c] [PATCH 3/3] Add device tree compatible aliases to i2c drivers   Olof Johansson
• drivers/char/hvc_* and /Documentation/powerpc/hvcs.txt   Olof Johansson
• [PATCH 3/3] Cell IOMMU static mapping support   Olof Johansson
• [PATCH 063/196] kset: convert /sys/devices to use kset_create   Olof Johansson
• Please pull for-2.6.25 branch of pasemi.git   Olof Johansson
• [PATCH 063/196] kset: convert /sys/devices to use kset_create   Olof Johansson
• [PATCH 2/3] Convert PowerPC MPC i2c to of_platform_driver from platform_driver   Olof Johansson
• [Cbe-oss-dev] [PATCH 3/3] Cell IOMMU static mapping support   Olof Johansson
• [Cbe-oss-dev] [PATCH 3/3] Cell IOMMU static mapping support   Olof Johansson
• [PATCH 8/8] Cell IOMMU fixed mapping support   Olof Johansson
• [PATCH 8/8] Cell IOMMU fixed mapping support   Olof Johansson
• [PATCH 8/8] Cell IOMMU fixed mapping support   Olof Johansson
• ppc64 vecemu compile failure   Olof Johansson
• [PATCH 8/8] Cell IOMMU fixed mapping support   Olof Johansson
• ppc64 vecemu compile failure   Olof Johansson
• [PATCH v2] powerpc: configure USB clock for MPC8315E   Olof Johansson
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Olof Johansson
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Olof Johansson
• [powerpc changes] Re: x86/non-x86: percpu, node ids, apic ids x86.git fixup   Olof Johansson
• [PATCH] [POWERPC] Fix compilation for CONFIG_DEBUGGER=n and CONFIG_KEXEC=y   Olof Johansson
• build error with kdump shutdown hook support   Olof Johansson
• [PATCH] [POWERPC] Set dma_data correctly for direct_ops on pasemi   Olof Johansson
• PCI Failed to allocate mem for PCI ROM   Greg KH
• PCI Failed to allocate mem for PCI ROM   Greg KH
• 2.6.24-rc8-mm1 powerpc build errors   Greg KH
• [PATCH] [POWERPC] Always build setup-bus.c on powerpc   Greg KH
• [PATCH 063/196] kset: convert /sys/devices to use kset_create   Greg KH
• [BUILD FAILURE]2.6.24-git{1,2} kernel powerpc linkage failure   Greg KH
• [PATCH] Fix powerpc vio_find_name to not use devices_subsys   Greg KH
• ppc64 vecemu compile failure   Greg KH
• Please pull powerpc.git merge branch   Jeremy Kerr
• [PATCH] Make IOMMU code safe for > 132 GB of memory   Jeremy Kerr
• [PATCH][ppc] logical/bitand typo in powerpc/boot/4xx.c   Roel Kluin
• [PATCH][ppc] logical/bitand typo in powerpc/boot/4xx.c   Roel Kluin
• [PATCH 1/1][PPC] replace logical- by bit-and in pci_process_ISA_OF_ranges(), arch/powerpc/kernel/isa-bridge.c   Roel Kluin
• [PATCH 1/1][PPC] Test value, not 1 in print_insn_spu(), arch/powerpc/xmon/spu-dis.c   Roel Kluin
• [PATCH][ppc] logical/bitand typo in powerpc/boot/4xx.c   Roel Kluin
• [PATCH][drivers/net/fec_mpc52xx.c] duplicate NETIF_MSG_IFDOWN in MPC52xx_MESSAGES_DEFAULT   Roel Kluin
• [ppc] Disparity between sys_clock_getres and vdso implementation   Sripathi Kodi
• PCI Failed to allocate mem for PCI ROM   Ivan Kokshaysky
• [PATCH 1/7] [POWERPC] Xilinx: Uartlite: Make console output actually work.   Peter Korsgaard
• [PATCH 7/7] [POWERPC] Xilinx: Uartlite: Section type fixups   Peter Korsgaard
• Please pull linux-2.6-virtex.git   Peter Korsgaard
• [patch v4 0/4] Cypress c67x00 (EZ-Host/EZ-OTG) support   Peter Korsgaard
• [patch v4 1/4] USB: add Cypress c67x00 low level interface code   Peter Korsgaard
• [patch v4 2/4] USB: add Cypress c67x00 OTG controller core driver   Peter Korsgaard
• [patch v4 3/4] USB: add Cypress c67x00 OTG controller HCD driver   Peter Korsgaard
• [patch v4 4/4] USB: add Cypress c67x00 OTG controller gadget driver   Peter Korsgaard
• [patch v4 0/4] Cypress c67x00 (EZ-Host/EZ-OTG) support   Peter Korsgaard
• [patch v4 0/4] Cypress c67x00 (EZ-Host/EZ-OTG) support   Peter Korsgaard
• [patch v4 0/4] Cypress c67x00 (EZ-Host/EZ-OTG) support   Peter Korsgaard
• [patch v4 0/4] Cypress c67x00 (EZ-Host/EZ-OTG) support   Peter Korsgaard
• [patch v4 0/4] Cypress c67x00 (EZ-Host/EZ-OTG) support   Peter Korsgaard
• [patch v4 0/4] Cypress c67x00 (EZ-Host/EZ-OTG) support   Peter Korsgaard
• [patch v5 0/4] Cypress c67x00 (EZ-Host/EZ-OTG) support   Peter Korsgaard
• [patch v5 1/4] USB: add Cypress c67x00 low level interface code   Peter Korsgaard
• [patch v5 2/4] USB: add Cypress c67x00 OTG controller core driver   Peter Korsgaard
• [patch v5 3/4] USB: add Cypress c67x00 OTG controller HCD driver   Peter Korsgaard
• [patch v5 4/4] USB: add Cypress c67x00 OTG controller gadget driver   Peter Korsgaard
• [patch v4 0/4] Cypress c67x00 (EZ-Host/EZ-OTG) support   Peter Korsgaard
• [patch v6 0/4] Cypress c67x00 (EZ-Host/EZ-OTG) support   Peter Korsgaard
• [patch v6 1/4] USB: add Cypress c67x00 low level interface code   Peter Korsgaard
• [patch v6 2/4] USB: add Cypress c67x00 OTG controller core driver   Peter Korsgaard
• [patch v6 3/4] USB: add Cypress c67x00 OTG controller HCD driver   Peter Korsgaard
• [patch v6 4/4] USB: add Cypress c67x00 OTG controller gadget driver   Peter Korsgaard
• [patch v6 3/4] USB: add Cypress c67x00 OTG controller HCD driver   Peter Korsgaard
• 2.6.24-rc8-mm1: powerpc: include/asm/nvram.h:62: error: field 'partition' has incomplete type   Mariusz Kozlowski
• 2.6.24-rc8-mm1: powerpc oopses   Mariusz Kozlowski
• 2.6.24-rc8-mm1: powerpc oopses   Mariusz Kozlowski
• request_irq() for external interrupt pin on MPC875 (A&M adder MPC 875)   Rognlien Dag Kristian
• PCI configuration with multiple PCI controllers   Laurent Lagrange
• crash in kmem_cache_init   Christoph Lameter
• crash in kmem_cache_init   Christoph Lameter
• crash in kmem_cache_init   Christoph Lameter
• crash in kmem_cache_init   Christoph Lameter
• crash in kmem_cache_init   Christoph Lameter
• crash in kmem_cache_init   Christoph Lameter
• crash in kmem_cache_init   Christoph Lameter
• crash in kmem_cache_init   Christoph Lameter
• crash in kmem_cache_init   Christoph Lameter
• crash in kmem_cache_init   Christoph Lameter
• crash in kmem_cache_init   Christoph Lameter
• crash in kmem_cache_init   Christoph Lameter
• crash in kmem_cache_init   Christoph Lameter
• crash in kmem_cache_init   Christoph Lameter
• crash in kmem_cache_init   Christoph Lameter
• crash in kmem_cache_init   Christoph Lameter
• crash in kmem_cache_init   Christoph Lameter
• crash in kmem_cache_init   Christoph Lameter
• [PATCH] Fix boot problem in situations where the boot CPU is running on a memoryless node   Christoph Lameter
• [PATCH] Fix boot problem in situations where the boot CPU is running on a memoryless node   Christoph Lameter
• [PATCH] Fix boot problem in situations where the boot CPU is running on a memoryless node   Christoph Lameter
• [PATCH] Fix boot problem in situations where the boot CPU is running on a memoryless node   Christoph Lameter
• [PATCH] Fix boot problem in situations where the boot CPU is running on a memoryless node   Christoph Lameter
• [PATCH] Fix boot problem in situations where the boot CPU is running on a memoryless node   Christoph Lameter
• Reboot at insmod of cf card driver   Lehmann, Hans (Ritter Elektronik)
• [patch 0/3] PS3 logical performance monitor patches for 2.6.25   Geoff Levand
• [patch 1/3] PS3: Add logical performance monitor repository routines   Geoff Levand
• [patch 2/3] PS3: Add logical performance monitor device support   Geoff Levand
• [patch 3/3] PS3: Add logical performance monitor driver support   Geoff Levand
• [patch 2/3] PS3: Add logical performance monitor device support   Geoff Levand
• [patch 3/3] PS3: Add logical performance monitor driver support   Geoff Levand
• [patch 1/4] POWERPC: Add Cell SPRN bookmark register   Geoff Levand
• [patch 2/4 v2] PS3: Add logical performance monitor repository routines   Geoff Levand
• [patch 3/4 v2] PS3: Add logical performance monitor device support   Geoff Levand
• [patch 4/4 v2] PS3: Add logical performance monitor driver support   Geoff Levand
• [patch 2/4 v3] PS3: Add logical performance monitor repository routines   Geoff Levand
• [patch 3/4 v3] PS3: Add logical performance monitor device support   Geoff Levand
• [patch 4/4 v3] PS3: Add logical performance monitor driver support   Geoff Levand
• [patch 4/4 v4] PS3: Add logical performance monitor driver support   Geoff Levand
• [patch 00/16] PS3 patch collection for 2.6.25   Geoff Levand
• [patch 01/16] POWERPC: Add Cell SPRN bookmark register   Geoff Levand
• [patch 02/16] PS3: Make bus_id and dev_id u64   Geoff Levand
• [patch 03/16] PS3: Add ps3_repository_find_device_by_id()   Geoff Levand
• [patch 04/16] PS3: Use the HVs storage device notification mechanism properly   Geoff Levand
• [patch 05/16] PS3: Add repository polling loop to work around timing bug   Geoff Levand
• [patch 06/16] PS3: Kill unused ps3_repository_bump_device()   Geoff Levand
• [patch 07/16] PS3: Refactor ps3_repository_find_device()   Geoff Levand
• [patch 08/16] PS3: Checkpatch cleanups for drivers/ps3/ps3-sys-manager.c   Geoff Levand
• [patch 09/16] PS3: Checkpatch cleanups for drivers/ps3/ps3-vuart.c   Geoff Levand
• [patch 10/16] PS3: Checkpatch cleanups for arch/powerpc/platforms/ps3/repository.c   Geoff Levand
• [patch 11/16] PS3: Add logical performance monitor repository routines   Geoff Levand
• [patch 12/16] PS3: Add logical performance monitor device support   Geoff Levand
• [patch 13/16] PS3: Add logical performance monitor driver support   Geoff Levand
• [patch 14/16] PS3: Vuart change semaphore to mutex   Geoff Levand
• [patch 15/16] PS3: Revove use lpar address workaround   Geoff Levand
• [patch 16/16] PS3: Update ps3_defconfig   Geoff Levand
• [PATCH 0/6] PS3: gelic: gelic updates for 2.6.25   Geoff Levand
• [patch 00/11] ps3av/3fb patches for 2.6.25   Geoff Levand
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Geoff Levand
• [powerpc changes] Re: x86/non-x86: percpu, node ids, apic ids x86.git fixup   Geoff Levand
• build error with kdump shutdown hook support   Geoff Levand
• [PATCH] powerpc: Add MPC837x PCIE controller RC mode support   Li Li
• [PATCH] powerpc: Add MPC837x PCIE controller RC mode support   Li Li
• [PATCH] powerpc: Add MPC837x PCIE controller RC mode support   Li Li
• [PATCH] powerpc: Add MPC837x PCIE controller RC mode support   Li Li
• [PATCH] powerpc: Add MPC837x PCIE controller RC mode support   Li Li
• Using C67x00 on PXA255 with ov511   Grant Likely
• [PATCH v3 1/4] USB: add Cypress c67x00 low level interface code   Grant Likely
• [PATCH v3 2/4] USB: add Cypress c67x00 OTG controller core driver   Grant Likely
• [PATCH v3 3/4] USB: add Cypress c67x00 OTG controller HCD driver   Grant Likely
• [PATCH v3 4/4] USB: add Cypress c67x00 OTG controller driver to Kconfig and Makefiles   Grant Likely
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Grant Likely
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Grant Likely
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Grant Likely
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Grant Likely
• [PATCH] [POWERPC] Sequoia: typo in calling machine_device_initcall()   Grant Likely
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Grant Likely
• [PATCH 0/5] Make platform code use machine_*_initcall() macros   Grant Likely
• [PATCH 1/5] [POWERPC] powermac: Use machine_*_initcall() hooks in platform code   Grant Likely
• [PATCH 2/5] [POWERPC] cell: Use machine_*_initcall() hooks in platform code   Grant Likely
• [PATCH 3/5] [POWERPC] pasemi: Use machine_*_initcall() hooks in platform code   Grant Likely
• [PATCH 4/5] [POWERPC] 8xx: Use machine_*_initcall() hooks in platform code   Grant Likely
• [PATCH 5/5] [POWERPC] 8xxx and embedded6xx: Use machine_*_initcall() hooks in platform code   Grant Likely
• [PATCH v4 02/13] [POWERPC] Add 'fsl, lpb' bus type for MPC5200 LocalPlus Bus   Grant Likely
• [PATCH 4/5] [POWERPC] 8xx: Use machine_*_initcall() hooks in platform code   Grant Likely
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Grant Likely
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Grant Likely
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Grant Likely
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Grant Likely
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Grant Likely
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Grant Likely
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Grant Likely
• [RFC] Add of_find_matching_node() helper function   Grant Likely
• [PATCH] [POWERPC] mpc5200: eliminate mpc52xx_*_map_*() functions.   Grant Likely
• [RFC 0/2] mpc5200: eliminate direct manipulation of shared registers from SPI driver   Grant Likely
• [RFC 1/2] mpc5200: Add common clock setting routine mpc52xx_set_psc_clkdiv()   Grant Likely
• [RFC 2/2] mpc52xx_psc_spi device driver must not touch port_config and cdm   Grant Likely
• [RFC PATCH 1/3] Add StorCenter DTS first draft.   Grant Likely
• [RFC PATCH 2/3] Add initial iomega StorCenter board port.   Grant Likely
• [RFC PATCH 0/3]: Add StorCenter port to arch/powerpc   Grant Likely
• [PATCH] Hwmon for Taco   Grant Likely
• [PATCH 1/3] add default device trees for MPC837x MDS board   Grant Likely
• [PATCH 3/7] Basic Freescale MPC512x support   Grant Likely
• [PATCH 4/7] Device tree for MPC5121 ADS   Grant Likely
• [PATCH 5/7] Separate MPC52xx PSC FIFO registers from rest of PSC   Grant Likely
• [PATCH 6/7] Add mpc512x_find_ips_freq   Grant Likely
• [PATCH 7/7] Add MPC512x PSC serial driver   Grant Likely
• [PATCH 1/3] add default device trees for MPC837x MDS board   Grant Likely
• [PATCH 3/7] Basic Freescale MPC512x support   Grant Likely
• [PATCH RFC 0/3] PowerPC: implement support for GPIO LIB API   Grant Likely
• [PATCH] [POWERPC] Add of_find_matching_node() helper function   Grant Likely
• [PATCH 0/7] [POWERPC] Xilinx: Device Tree updates for xilinx.   Grant Likely
• [PATCH 7/7] Add MPC512x PSC serial driver   Grant Likely
• Generic desktop/server/laptop lable is confusing [Was Re: [PATCH 3/7] Basic Freescale MPC512x support]   Grant Likely
• [PATCH V2] [POWERPC] Add common clock setting routine mpc52xx_psc_set_clkdiv()   Grant Likely
• Please pull linux-2.6-virtex.git   Grant Likely
• add phy-handle property for fec_mpc52xx   Grant Likely
• add phy-handle property for fec_mpc52xx   Grant Likely
• Please pull linux-2.6-virtex.git   Grant Likely
• add phy-handle property for fec_mpc52xx   Grant Likely
• add phy-handle property for fec_mpc52xx   Grant Likely
• add phy-handle property for fec_mpc52xx   Grant Likely
• add phy-handle property for fec_mpc52xx   Grant Likely
• [RFC] add phy-handle property for fec_mpc52xx   Grant Likely
• add phy-handle property for fec_mpc52xx   Grant Likely
• Linux for ml310   Grant Likely
• [PATCH 1/3] add default device trees for MPC837x MDS board   Grant Likely
• [RFC] add phy-handle property for fec_mpc52xx   Grant Likely
• [PATCH V3] [POWERPC] Add common clock setting routine mpc52xx_psc_set_clkdiv()   Grant Likely
• [PATCH V3] [POWERPC] Add common clock setting routine mpc52xx_psc_set_clkdiv()   Grant Likely
• Platform matching style (was:: [RFC] add phy-handle property for fec_mpc52xx)   Grant Likely
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Grant Likely
• Please pull linux-2.6-mpc52xx for-2.6.24   Grant Likely
• [PATCH v2] [POWERPC] Update MPC8610 HPCD to support audio drivers   Grant Likely
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Grant Likely
• [PATCH v3] [POWERPC] Update MPC8610 HPCD to support audio drivers   Grant Likely
• [PATCH v2] [ALSA] Add ASoC drivers for the Freescale MPC8610 SoC   Grant Likely
• [alsa-devel] [PATCH v2] [ALSA] Add ASoC drivers for the Freescale MPC8610 SoC   Grant Likely
• StorCenter Help?   Grant Likely
• StorCenter Help?   Grant Likely
• I2C and CAN bus on MPC5200B device tree   Grant Likely
• I2C and CAN bus on MPC5200B device tree   Grant Likely
• psc and spi   Grant Likely
• [PATCH] [POWERPC] Add of_find_matching_node() helper function   Grant Likely
• [PATCH/RFC] [POWERPC] CPM1: implement GPIO LIB API   Grant Likely
• Patches added to master/for-2.6.25 branch of powerpc.git   Grant Likely
• [PATCH] [POWERPC] Update TQM5200, CM5200 and Motion-PRO _defconfig and .dts files   Grant Likely
• [Add mpc5121 support PATCH v2 3/8] Basic Freescale MPC512x support   Grant Likely
• [Add mpc5121 support PATCH v2 4/8] Device tree for MPC5121 ADS   Grant Likely
• [Add mpc5121 support PATCH v2 6/8] Cleanup checkpatch.pl problems in mpc52xx_uart.c   Grant Likely
• [Add mpc5121 support PATCH v2 5/8] Separate MPC52xx PSC FIFO registers from rest of PSC   Grant Likely
• [PATCH] [POWERPC] Update TQM5200, CM5200 and Motion-PRO _defconfig and .dts files   Grant Likely
• [PATCH v5] [POWERPC] Add LED driver for Promess Motion-PRO board.   Grant Likely
• [Add mpc5121 support PATCHES v3 0/8]   Grant Likely
• Patches added to master/for-2.6.25 branch of powerpc.git   Grant Likely
• [RFC/PATCH 0/2] mpc5200: tidy up the device tree bindings   Grant Likely
• [RFC/PATCH 1/2] [POWERPC] mpc5200: normalize compatible property bindings   Grant Likely
• [RFC/PATCH 2/2] [POWERPC] Efika: prune fixups and make them more carefull   Grant Likely
• [PATCH/RFC] [POWERPC] Allow multiple images to be built when CONFIG_DEFAULT_UIMAGE set   Grant Likely
• [Add mpc5121 support PATCH v3 7/8] Factor out 52xx dependencies from 52xx psc driver   Grant Likely
• [Add mpc5121 support PATCH v3 7/8] Factor out 52xx dependencies from 52xx psc driver   Grant Likely
• [patch v4 0/4] Cypress c67x00 (EZ-Host/EZ-OTG) support   Grant Likely
• [PATCH] autodetect serial console on efika   Grant Likely
• Patches added to master/for-2.6.25 branch of powerpc.git   Grant Likely
• [PATCH 1/2] [POWERPC] 8xx: Use machine_*_initcall() hooks in platform code   Grant Likely
• [PATCH 2/2] [POWERPC] 8xxx and embedded6xx: Use machine_*_initcall() hooks in platform code   Grant Likely
• [PATCH 2/2] [POWERPC] 8xxx and embedded6xx: Use machine_*_initcall() hooks in platform code   Grant Likely
• [PATCH 2/2] [POWERPC] 8xxx and embedded6xx: Use machine_*_initcall() hooks in platform code   Grant Likely
• [patch v4 0/4] Cypress c67x00 (EZ-Host/EZ-OTG) support   Grant Likely
• [PATCH] autodetect serial console on efika   Grant Likely
• [patch v4 0/4] Cypress c67x00 (EZ-Host/EZ-OTG) support   Grant Likely
• [PATCH] [POWERPC] mpc52xx: clean up Kconfig   Grant Likely
• [PATCH] Various new ibm405 DCRN #defines   Grant Likely
• [PATCH] [POWERPC] Add docs for Freescale PowerQUICC SATA device tree nodes   Grant Likely
• [PATCH 1/3 v3] Add StorCenter DTS first draft.   Grant Likely
• [PATCH 1/3 v3] Add StorCenter DTS first draft.   Grant Likely
• [PATCH 1/3] Rename i2c-mpc to i2c-mpc-drv in preparation for breaking out common code.   Grant Likely
• [PATCH] [POWERPC] Update TQM5200, CM5200 and Motion-PRO _defconfig and .dts files   Grant Likely
• [patch v4 0/4] Cypress c67x00 (EZ-Host/EZ-OTG) support   Grant Likely
• [PATCH] [POWERPC] 82xx and embedded6xx: Use machine_*_initcall() hooks in platform code   Grant Likely
• [PATCH 8/9] powerpc: add the mpc837[789]_rdb dts files   Grant Likely
• [PATCH/RFC] [POWERPC] Allow multiple images to be built when CONFIG_DEFAULT_UIMAGE set   Grant Likely
• Reminder: removal of arch/ppc   Grant Likely
• [PATCH] 5200 dts: add default address and size cells to soc node.   Grant Likely
• xsysace.c oops on restart   Grant Likely
• Patches added to for-2.6.25/master branches of powerpc.git   Grant Likely
• [PATCH 3/3] [POWERPC] QE: implement GPIO LIB API   Grant Likely
• [PATCH 0/9] 83xx DTS fixes and v1 conversions   Grant Likely
• [patch v4 0/4] Cypress c67x00 (EZ-Host/EZ-OTG) support   Grant Likely
• [RFC] [POWERPC] bootwrapper: build multiple cuImages   Grant Likely
• [RFC] [POWERPC] bootwrapper: build multiple cuImages   Grant Likely
• [PATCH 0/6] PS3: gelic: gelic updates for 2.6.25   John W. Linville
• [PATCH 0/6] PS3: gelic: gelic updates for 2.6.25   John W. Linville
• [PATCH 0/6] PS3: gelic: gelic updates for 2.6.25   John W. Linville
• Outstanding DTC patches?   Jon Loeliger
• [PATCH 2/3] mpc82xx: Embedded Planet EP8248E support   Jon Loeliger
• Outstanding DTC patches?   Jon Loeliger
• [DTC] small ftdump cleanup patch   Jon Loeliger
• [PATCH 1/3] Add yyerrorf() for formatted error messages.   Jon Loeliger
• Outstanding DTC patches?   Jon Loeliger
• [PATCH 2/3] Handle absolute pathnames correctly in dtc_open_file.   Jon Loeliger
• [PATCH 3/3] Remove \n from yyerror() call.   Jon Loeliger
• [PATCH 1/3] Add support for binary includes.   Jon Loeliger
• [PATCH 2/3] Handle absolute pathnames correctly in dtc_open_file.   Jon Loeliger
• [RFC PATCH 0/3]: Add StorCenter port to arch/powerpc   Jon Loeliger
• [RFC PATCH 1/3] Add StorCenter DTS first draft.   Jon Loeliger
• [RFC PATCH 2/3] Add initial iomega StorCenter board port.   Jon Loeliger
• [RFC PATCH 3/3] Add initial storcenter config file.   Jon Loeliger
• [PATCH] Use <linux/of_{platform, device}.h> and not <asm/...> variants.   Jon Loeliger
• [RFC PATCH 1/3] Add StorCenter DTS first draft.   Jon Loeliger
• [RFC PATCH 2/3] Add initial iomega StorCenter board port.   Jon Loeliger
• [RFC PATCH 0/3]: Add StorCenter port to arch/powerpc   Jon Loeliger
• [RFC PATCH 2/3] Add initial iomega StorCenter board port.   Jon Loeliger
• [PATCH] Use <linux/of_{platform, device}.h> and not <asm/...> variants.   Jon Loeliger
• [PATCH 3/7] Basic Freescale MPC512x support   Jon Loeliger
• [PATCH 0/3 v2] Add iomega StorCenter basic port   Jon Loeliger
• [PATCH 1/3 v2] Add StorCenter DTS first draft.   Jon Loeliger
• [PATCH 2/3 v2] Add initial iomega StorCenter board port.   Jon Loeliger
• [PATCH 3/3 v2] Add initial storcenter config file.   Jon Loeliger
• [PATCH 1/3 v2] Add StorCenter DTS first draft.   Jon Loeliger
• [DTC PATCH 2/2] Preserve scanner state when /include/ing.   Jon Loeliger
• [PATCH 2/3] Look for include files in the directory of the including file.   Jon Loeliger
• DTC v1.1.0-rc1 tagged!   Jon Loeliger
• libfdt: Add fdt_set_name() function   Jon Loeliger
• libfdt: Add fdt_set_name() function   Jon Loeliger
• [DTC PATCH] Remove const from dtc_file::dir.   Jon Loeliger
• StorCenter Help?   Jon Loeliger
• StorCenter Help?   Jon Loeliger
• [PATCH v2 1/2] Add localbus and flash nodes to mpc8641_hpcn.dts   Jon Loeliger
• [PATCH v2 1/2] Add localbus and flash nodes to mpc8641_hpcn.dts   Jon Loeliger
• [PATCH 0/3 v3] Add StorCenter port   Jon Loeliger
• [PATCH 1/3 v3] Add StorCenter DTS first draft.   Jon Loeliger
• [PATCH 2/3 v3] Add initial iomega StorCenter board port.   Jon Loeliger
• [PATCH 3/3 v3] Add initial storcenter config file.   Jon Loeliger
• [PATCH 1/3 v3] Add StorCenter DTS first draft.   Jon Loeliger
• [PATCH 2/3 v3] Add initial iomega StorCenter board port.   Jon Loeliger
• [PATCH 2/3] Convert PowerPC MPC i2c to of_platform_driver from platform_driver   Jon Loeliger
• [PATCHv2 0/8] [POWERPC] 8xx cleanups   Jon Loeliger
• [PATCH 0/4 v4] Add StorCenter port   Jon Loeliger
• [PATCH 1/4 v4] POWERPC: Add _nmask_and_or_msr() declartion to asm-powerpc/system.h   Jon Loeliger
• [PATCH 2/4 v4] POWERPC: Add StorCenter DTS first draft.   Jon Loeliger
• [PATCH 3/4 v4] POWERPC: Add initial iomega StorCenter board port.   Jon Loeliger
• [PATCH 4/4 v4] POWERPC: Add initial storcenter config file.   Jon Loeliger
• [PATCH 3/4 v4] POWERPC: Add initial iomega StorCenter board port.   Jon Loeliger
• [PATCH 3/4 v4] POWERPC: Add initial iomega StorCenter board port.   Jon Loeliger
• DTC 1.1.0 Release!   Jon Loeliger
• [PATCH v5 0/5] device_type/compatible cleanups   Jon Loeliger
• [PATCH] POWERPC: Convert all 86xx DTS files to /dts-v1/ format.   Jon Loeliger
• [PATCH] POWERPC: Convert StorCenter DTS file to /dts-v1/ format.   Jon Loeliger
• [patch 00/11] ps3av/3fb patches for 2.6.25   Jon Loeliger
• [PATCH] [POWERPC] 86xx: Remove unused IRQ defines   Jon Loeliger
• [PATCH 3/3] Add device tree compatible aliases to i2c drivers   Jon Loeliger
• [PATCH 3/4] 82xx: MGCOGE support   Jon Loeliger
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Luck, Tony
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Luck, Tony
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Luck, Tony
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Luck, Tony
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Luck, Tony
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Luck, Tony
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Luck, Tony
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Luck, Tony
• add phy-handle property for fec_mpc52xx   Sven Luther
• add phy-handle property for fec_mpc52xx   Sven Luther
• add phy-handle property for fec_mpc52xx   Sven Luther
• add phy-handle property for fec_mpc52xx   Sven Luther
• add phy-handle property for fec_mpc52xx   Sven Luther
• add phy-handle property for fec_mpc52xx   Sven Luther
• [RFC] add phy-handle property for fec_mpc52xx   Sven Luther
• add phy-handle property for fec_mpc52xx   Sven Luther
• [PATCH 1/8] pseries: phyp dump: Docmentation   Nathan Lynch
• [PATCH 1/8] pseries: phyp dump: Docmentation   Nathan Lynch
• [PATCH] Fix CPU hotplug when using the SLB shadow buffer   Nathan Lynch
• [PATCH 1/8] pseries: phyp dump: Docmentation   Nathan Lynch
• How to creat a .config file for a driver and How to use it in adevice driver?????   Sean MacLennan
• [PATCH] i2c-ibm_iic driver   Sean MacLennan
• [PATCH] Base Taco Platform support   Sean MacLennan
• [PATCH] Base Taco Platform support   Sean MacLennan
• [PATCH] Hwmon for Taco   Sean MacLennan
• [PATCH] MTD for Taco   Sean MacLennan
• [PATCH] Miscellaneous for Taco   Sean MacLennan
• [PATCH] Base Taco Platform support   Sean MacLennan
• [PATCH] MTD for Taco   Sean MacLennan
• [PATCH] Miscellaneous for Taco   Sean MacLennan
• [PATCH] i2c-ibm_iic driver   Sean MacLennan
• [PATCH] i2c-ibm_iic driver   Sean MacLennan
• [PATCH] i2c-ibm_iic driver   Sean MacLennan
• [PATCH] Hwmon for Taco   Sean MacLennan
• [PATCH] MTD for Taco   Sean MacLennan
• [PATCH] i2c-ibm_iic driver   Sean MacLennan
• [PATCH] i2c-ibm_iic driver - new patch   Sean MacLennan
• How complete should the DTS be?   Sean MacLennan
• [PATCH] i2c-ibm_iic driver - new patch   Sean MacLennan
• [PATCH] Hwmon for Taco   Sean MacLennan
• [PATCH] Hwmon for Taco   Sean MacLennan
• [PATCH] Hwmon for Taco   Sean MacLennan
• [PATCH] i2c-ibm_iic driver - new patch   Sean MacLennan
• [PATCH] Miscellaneous for Taco   Sean MacLennan
• Base Warp Platform support   Sean MacLennan
• [PATCH 1/2] Base Warp Platform support   Sean MacLennan
• [PATCH 2/2] Base Warp Platform support   Sean MacLennan
• [PATCH] i2c-ibm_iic driver   Sean MacLennan
• [PATCH] ad7414 driver   Sean MacLennan
• [PATCH] Miscellaneous for Taco   Sean MacLennan
• Base Warp Platform support   Sean MacLennan
• [PATCH] Kconfig scsi_wait_scan   Sean MacLennan
• [PATCH] MTD for Taco   Sean MacLennan
• [PATCH] MTD for Taco   Sean MacLennan
• [PATCH 3/2] Base Warp Platform support   Sean MacLennan
• [PATCH] Miscellaneous for Taco   Sean MacLennan
• [PATCH] Miscellaneous for Taco   Sean MacLennan
• [PATCH 1/5] Warp Base Platform   Sean MacLennan
• [PATCH 2/5] Warp Base Platform - dts   Sean MacLennan
• [PATCH 3/5] Warp Base Platform   Sean MacLennan
• [PATCH 4/5] Warp Base Platform - defconfig   Sean MacLennan
• [PATCH 5/5] Warp Base Platform - cputable   Sean MacLennan
• [PATCH 2/5] Warp Base Platform - dts   Sean MacLennan
• [PATCH 3/5] Warp Base Platform   Sean MacLennan
• [PATCH 2/5] Warp Base Platform - dts   Sean MacLennan
• How complete should the DTS be?   Sean MacLennan
• ibm4xx_quiesce_eth?   Sean MacLennan
• [PATCH 2/5] Warp Base Platform - dts   Sean MacLennan
• [PATCH 3/5] Warp Base Platform   Sean MacLennan
• [PATCH 2/5] Warp Base Platform - dts   Sean MacLennan
• [PATCH 2/5] Warp Base Platform - dts   Sean MacLennan
• [PATCH 3/5] Warp Base Platform   Sean MacLennan
• ibm4xx_quiesce_eth?   Sean MacLennan
• [PATCH 1/5] Warp Base Platform   Sean MacLennan
• [PATCH 1/5] Warp Base Platform   Sean MacLennan
• [PATCH 1/5] Warp Base Platform   Sean MacLennan
• [PATCH 2/5] Warp Base Platform - dts   Sean MacLennan
• [PATCH 1/5] Warp Base Platform   Sean MacLennan
• [PATCH 1/5] Warp Base Platform   Sean MacLennan
• [PATCH 1/5] Warp Base Platform   Sean MacLennan
• [PATCH 1/5] Warp Base Platform   Sean MacLennan
• [PATCH 1/5] Warp Base Platform   Sean MacLennan
• [PATCH 1/5] Warp Base Platform   Sean MacLennan
• [PATCH 2/5] Warp Base Platform - dts   Sean MacLennan
• [PATCH 1/5] Warp Base Platform   Sean MacLennan
• [PATCH] MTD for Taco   Sean MacLennan
• [PATCH 1/5] Warp Base Platform   Sean MacLennan
• [PATCH] MTD for Taco   Sean MacLennan
• [PATCH] MTD for Taco   Sean MacLennan
• emac/zmii link warnings   Sean MacLennan
• emac/zmii link warnings   Sean MacLennan
• emac/zmii link warnings   Sean MacLennan
• [PATCH] MTD for Taco   Sean MacLennan
• [PATCH] MTD for Taco   Sean MacLennan
• [PATCH] MTD for Taco   Sean MacLennan
• [PATCH 1/5] Warp Base Platform   Sean MacLennan
• [PATCH] MTD for Taco   Sean MacLennan
• Warp Watchdog   Sean MacLennan
• Warp Watchdog   Sean MacLennan
• [PATCH 1/5] Warp Base Platform   Sean MacLennan
• [PATCH} PIKA FPGA WDT driver   Sean MacLennan
• [PATCH]warp.c   Sean MacLennan
• i2c-ibm_iic.c fix   Sean MacLennan
• [PATCH] FIXED_MII_100_FDX   Sean MacLennan
• ndfc ecc byte order   Sean MacLennan
• 2.6.24-rc8-mm1: powerpc oopses   Matt Mackall
• 2.6.24-rc8-mm1: powerpc oopses   Matt Mackall
• 2.6.24-rc8-mm1: powerpc oopses   Matt Mackall
• 2.6.24-rc8-mm1: powerpc oopses   Matt Mackall
• 2.6.24-rc8-mm1: powerpc oopses   Matt Mackall
• Please pull powerpc.git merge branch   Paul Mackerras
• [PATCH v2] [POWERPC] Provide a way to protect 4k subpages when using 64k pages   Paul Mackerras
• add phy-handle property for fec_mpc52xx   Paul Mackerras
• add phy-handle property for fec_mpc52xx   Paul Mackerras
• Please pull powerpc.git merge branch   Paul Mackerras
• Please pull powerpc.git merge branch   Paul Mackerras
• [PATCH] [POWERPC] Add of_find_matching_node() helper function   Paul Mackerras
• [PATCH 3/8] pseries: phyp dump: reserve-release proof-of-concept   Paul Mackerras
• Patches added to master/for-2.6.25 branch of powerpc.git   Paul Mackerras
• Patches added to master/for-2.6.25 branch of powerpc.git   Paul Mackerras
• Patches added to master/for-2.6.25 branch of powerpc.git   Paul Mackerras
• 2.6.24-rc8-mm1 Kernel oops will running kernbench   Paul Mackerras
• 2.6.24-rc8-mm1 Kernel oops will running kernbench   Paul Mackerras
• 2.6.24-rc8-mm1 Kernel oops will running kernbench   Paul Mackerras
• [PATCH v2] Fix handling of memreserve if the range lands in highmem   Paul Mackerras
• [PATCH 1/4 v4] POWERPC: Add _nmask_and_or_msr() declartion to asm-powerpc/system.h   Paul Mackerras
• [PATCH v3] create modalias file in sysfs for bus of_platform   Paul Mackerras
• [RFC][PATCH] remove section mappinng   Paul Mackerras
• Patches added to for-2.6.25/master branches of powerpc.git   Paul Mackerras
• [PATCH] Fix powerpc vio_find_name to not use devices_subsys   Paul Mackerras
• [PATCH] Fake NUMA emulation for PowerPC (Take 2)   Paul Mackerras
• Please pull powerpc.git for-2.6.25 branch   Paul Mackerras
• [PATCH] Fix remainder calculating bug in single floating point division   Dan Malek
• [i2c] [PATCH 0/3] i2c: Use the standard, alias-based device/driver matching scheme   Rudolf Marek
• [PATCH 0/5] ehea: fixups for checkpatch   Doug Maxey
• [PATCH 1/5] ehea: fix ehea.h checkpatch complaints   Doug Maxey
• [PATCH 2/5] ehea: fix ethtool checkpatch complaints   Doug Maxey
• [PATCH 3/5] ehea: fix main checkpatch complaints   Doug Maxey
• [PATCH 4/5] ehea: fix phyp checkpatch complaints   Doug Maxey
• [PATCH 5/5] ehea: fix qmr checkpatch complaints   Doug Maxey
• [PATCH -mm] compat_binfmt_elf Kconfig   Roland McGrath
• [PATCH -mm] x86 compat_binfmt_elf   Roland McGrath
• [PATCH -mm] powerpc compat_binfmt_elf   Roland McGrath
• [PATCH -mm] compat_binfmt_elf Kconfig   Roland McGrath
• [PATCH update -mm 16/43] powerpc user_regset compat   Roland McGrath
• [MPC5200] problem running FEC and ATA   Mehlan, Markus (Ritter Elektronik)
• [MPC5200] problem running FEC and ATA   Mehlan, Markus (Ritter Elektronik)
• [MPC5200] problem running FEC and ATA   Mehlan, Markus (Ritter Elektronik)
• [PATCH] [POWERPC] Check that the syscall table matches the syscall   Milton Miller
• 2.6.24-rc8-mm1 Kernel oops will running kernbench   Milton Miller
• [PATCH 6/6 v2] PS3: gelic: Add support for dual network interface   Masakazu Mokuno
• [PATCH 0/6] PS3: gelic: gelic updates for 2.6.25   Masakazu Mokuno
• [PATCH -mm] compat_binfmt_elf Kconfig   Ingo Molnar
• [PATCH -mm] x86 compat_binfmt_elf   Ingo Molnar
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Ingo Molnar
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Ingo Molnar
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Ingo Molnar
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Ingo Molnar
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Ingo Molnar
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Ingo Molnar
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Ingo Molnar
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Ingo Molnar
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Ingo Molnar
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Ingo Molnar
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Ingo Molnar
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Ingo Molnar
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Ingo Molnar
• [powerpc changes] Re: x86/non-x86: percpu, node ids, apic ids x86.git fixup   Ingo Molnar
• [PATCH 2/6] percpu: Change Kconfig to HAVE_SETUP_PER_CPU_AREA linux-2.6.git   Ingo Molnar
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Ingo Molnar
• [PATCH 1/3] drivers/misc :UCC based TDM driver for MPC83xx platforms.   Andrew Morton
• 2.6.24-rc8-mm1: powerpc: include/asm/nvram.h:62: error: field 'partition' has incomplete type   Andrew Morton
• 2.6.24-rc8-mm1 powerpc build errors   Andrew Morton
• 2.6.24-rc8-mm1: powerpc oopses   Andrew Morton
• 2.6.24-rc8-mm1: powerpc oopses   Andrew Morton
• 2.6.24-rc8-mm1: powerpc oopses   Andrew Morton
• 2.6.24-rc8-mm1: powerpc oopses   Andrew Morton
• 2.6.24-rc8-mm1 build failure on headers_check   Andrew Morton
• 2.6.24-rc8-mm1 Kernel oops will running kernbench   Andrew Morton
• [patch 04/11] ps3fb: Inline macros that are used only once   Andrew Morton
• [patch 00/11] ps3av/3fb patches for 2.6.25   Andrew Morton
• [patch 09/11] ps3fb: Round up video modes   Andrew Morton
• [patch 00/11] ps3av/3fb patches for 2.6.25   Andrew Morton
• [RFC] Add of_find_matching_node() helper function   Stephen Neuendorffer
• [PATCH 0/7] [POWERPC] Xilinx: Device Tree updates for xilinx.   Stephen Neuendorffer
• [PATCH 1/7] [POWERPC] Xilinx: Uartlite: Make console output actually work.   Stephen Neuendorffer
• [PATCH 2/7] [POWERPC] Xilinx: update compatible list for interrupt controller   Stephen Neuendorffer
• [PATCH 3/7] [POWERPC] Xilinx: Update compatible to use values generated by BSP generator.   Stephen Neuendorffer
• [PATCH 4/7] [POWERPC] Xilinx: Add correct compatible list for device tree bus bindings.   Stephen Neuendorffer
• [PATCH 5/7] [POWERPC] Xilinx: Update booting-without-of.   Stephen Neuendorffer
• [PATCH 6/7] [POWERPC] Xilinx: updated device tree compatibility to match uboot bsp generator.   Stephen Neuendorffer
• [PATCH 7/7] [POWERPC] Xilinx: Uartlite: Section type fixups   Stephen Neuendorffer
• [RFC] Xilinx: lltemac: use uboot bsp generated device tree style.   Stephen Neuendorffer
• [PATCH] Use <linux/of_{platform, device}.h> and not <asm/...>variants.   Stephen Neuendorffer
• [RFC] [POWERPC] bootwrapper: build multiple cuImages   Stephen Neuendorffer
• [PATCH] Fix CPU hotplug when using the SLB shadow buffer   Michael Neuling
• [PATCH] Fix CPU hotplug when using the SLB shadow buffer   Michael Neuling
• [PATCH] Fix CPU hotplug when using the SLB shadow buffer   Michael Neuling
• [PATCH] Fix CPU hotplug when using the SLB shadow buffer   Michael Neuling
• [PATCH] Fix CPU hotplug when using the SLB shadow buffer   Michael Neuling
• [PATCH 0/2] Add crashdump shutdown hooks   Michael Neuling
• [PATCH 1/2] Make setjmp/longjmp code generic   Michael Neuling
• [PATCH 2/2] kdump shutdown hook support   Michael Neuling
• [PATCH 1/2] Make setjmp/longjmp code generic   Michael Neuling
• [PATCH] Add crashdump shutdown hooks   Michael Neuling
• [PATCH] Make setjmp/longjmp code generic   Michael Neuling
• [PATCH 0/2] Add crashdump shutdown hooks   Michael Neuling
• [PATCH 1/2] Make setjmp/longjmp code generic   Michael Neuling
• [PATCH 2/2] kdump shutdown hook support   Michael Neuling
• [PATCH] IB/ehca: Forward event client-reregister-required to registered clients   Hoang-Nam Nguyen
• Book-E watchdog driver questions   Mike Nuss
• [PATCH 1/3] 8xx: Analogue & Micro Adder875 board support.   Bryan O'Donoghue
• [PATCH 1/3] 8xx: Analogue & Micro Adder875 board support.   Bryan O'Donoghue
• [PATCH 1/3] 8xx: Analogue & Micro Adder875 board support.   Bryan O'Donoghue
• [PATCH 1/3] 8xx: Analogue & Micro Adder875 board support.   Bryan O'Donoghue
• PATCH[1/1] 8xx: Add clock-frequency to .dts brg entries   Bryan O'Donoghue
• PATCH[1/1] 8xx: Add clock-frequency to .dts brg entries   Bryan O'Donoghue
• PATCH[1/1] 8xx: Add clock-frequency to .dts brg entries   Bryan O'Donoghue
• PATCH[1/1] 8xx: Add clock-frequency to Adder875 and mpc885ads board ports   Bryan O'Donoghue
• [PATCH][ppc] logical/bitand typo in powerpc/boot/4xx.c   Joe Perches
• [PATCH][ppc] logical/bitand typo in powerpc/boot/4xx.c   Joe Perches
• [PATCH 1/9] powerpc: fold the mpc8313 platform into the mpc831x platform   Kim Phillips
• [PATCH 2/9] powerpc: add base platform support for the mpc8315 rdb board   Kim Phillips
• [PATCH 3/9] powerpc: Add the MPC8315E RDB dts   Kim Phillips
• [PATCH 4/9] enable FSL SATA driver config for Freescale SoCs   Kim Phillips
• [PATCH 5/9] powerpc: ipic: add interrupt vector 94   Kim Phillips
• [PATCH 6/9] add the mpc8315 rdb defconfig   Kim Phillips
• [PATCH 7/9] powerpc: add MPC837x RDB platform support   Kim Phillips
• [PATCH 8/9] powerpc: add the mpc837[789]_rdb dts files   Kim Phillips
• [PATCH 9/9] powerpc: add the mpc837x rdb defconfig   Kim Phillips
• [PATCH 4/9] enable FSL SATA driver config for Freescale SoCs   Kim Phillips
• [PATCH 7/9] powerpc: add MPC837x RDB platform support   Kim Phillips
• [PATCH] powerpc: fix typo in mpc837x compatible entries   Kim Phillips
• [PATCH] powerpc: configure USB clock for MPC8315E   Kim Phillips
• [PATCH v2] powerpc: configure USB clock for MPC8315E   Kim Phillips
• [PATCH v3] powerpc: configure USB clock for MPC8315E   Kim Phillips
• [PATCH 0/3] UCC TDM driver for MPC83xx platforms   Aggrwal Poonam
• [PATCH 1/3] drivers/misc :UCC based TDM driver for MPC83xx platforms.   Aggrwal Poonam
• [PATCH 0/3] UCC TDM driver for MPC83xx platforms   Aggrwal Poonam
• [PATCH UCC TDM 0/3] UCC based TDM driver for QE based MPC83xx platforms   Aggrwal Poonam
• [PATCH UCC TDM 3/3 ] Modified Documentation to explain dtsentries for TDM driver   Aggrwal Poonam
• [PATCH UCC TDM 1/3 Updated] Platform changes for UCC TDM driver for MPC8323eRDB. Also includes related QE changes and dts entries.   Aggrwal Poonam
• [PATCH] UCC TDM driver for QE based MPC83xx platforms.   Poonam_Aggrwal-b10812
• [PATCH 2/3] Platform changes for UCC TDM driver for MPC8323ERDB.Also includes related QE changes and dts entries.   Poonam_Aggrwal-b10812
• [PATCH UCC TDM 3/3 ] Modified Documentation to explain dts entries for TDM driver   Poonam_Aggrwal-b10812
• [PATCH UCC TDM 1/3 Updated] Platform changes for UCC TDM driver for MPC8323eRDB. Also includes related QE changes and dts entries.   Poonam_Aggrwal-b10812
• [PATCH UCC TDM 2/3 ]Updated: UCC TDM driver for QE based MPC83xx platforms.   Poonam_Aggrwal-b10812
• Trying 10/HALF   Siva Prasad
• [RFC][PATCH] remove section mappinng   Badari Pulavarty
• [RFC][PATCH] remove section mappinng   Badari Pulavarty
• [-mm PATCH] updates for hotplug memory remove   Badari Pulavarty
• [-mm PATCH] updates for hotplug memory remove   Badari Pulavarty
• [-mm PATCH] updates for hotplug memory remove   Badari Pulavarty
• [PATCH -mm] compat_binfmt_elf Kconfig   Sam Ravnborg
• [PATCH -mm] compat_binfmt_elf Kconfig   Sam Ravnborg
• [PATCH -mm] compat_binfmt_elf Kconfig   Sam Ravnborg
• [PATCHv2 0/8] [POWERPC] 8xx cleanups   Sam Ravnborg
• [PATCHv2 0/8] [POWERPC] 8xx cleanups   Sam Ravnborg
• Section mismatch warnings om powerpc defconfig build:wq   Sam Ravnborg
• [PATCHv2 0/8] [POWERPC] 8xx cleanups   Sam Ravnborg
• [BUILD FAILURE] 2.6.24-git7 section type conflict at various drivers on powerpc   Sam Ravnborg
• Generic MMC-over-SPI binding?   Simon Richter
• Generic MMC-over-SPI binding?   Simon Richter
• Generic MMC-over-SPI binding?   Simon Richter
• [PATCH 0/7] mpc5121 support   John Rigby
• [PATCH 1/7] mpc5121: Add IPIC config option   John Rigby
• [PATCH 2/7] Add mpc512x ipic support   John Rigby
• [PATCH 3/7] Basic Freescale MPC512x support   John Rigby
• [PATCH 4/7] Device tree for MPC5121 ADS   John Rigby
• [PATCH 5/7] Separate MPC52xx PSC FIFO registers from rest of PSC   John Rigby
• [PATCH 6/7] Add mpc512x_find_ips_freq   John Rigby
• [PATCH 7/7] Add MPC512x PSC serial driver   John Rigby
• [PATCH 7/7] Add MPC512x PSC serial driver   John Rigby
• [PATCH 3/7] Basic Freescale MPC512x support   John Rigby
• [PATCH 3/7] Basic Freescale MPC512x support   John Rigby
• [PATCH 3/7] Basic Freescale MPC512x support   John Rigby
• Generic desktop/server/laptop lable is confusing [Was Re: [PATCH 3/7] Basic Freescale MPC512x support]   John Rigby
• [Add mpc5121 support PATCH v2 1/8] Add IPIC config option   John Rigby
• [Add mpc5121 support PATCH v2 2/8] Add mpc512x ipic support   John Rigby
• [Add mpc5121 support PATCH v2 3/8] Basic Freescale MPC512x support   John Rigby
• [Add mpc5121 support PATCH v2 4/8] Device tree for MPC5121 ADS   John Rigby
• [Add mpc5121 support PATCH v2 5/8] Separate MPC52xx PSC FIFO registers from rest of PSC   John Rigby
• [Add mpc5121 support PATCH v2 6/8] Cleanup checkpatch.pl problems in mpc52xx_uart.c   John Rigby
• [Add mpc5121 support PATCH v2 7/8] Factor out 52xx dependencies from 52xx psc driver   John Rigby
• [Add mpc5121 support PATCH v2 8/8] Add MPC512x support to MPC52xx psc driver   John Rigby
• [Add mpc5121 support PATCH v2 0/8]   John Rigby
• [Add mpc5121 support PATCHES v3 0/8]   John Rigby
• [Add mpc5121 support PATCH v3 1/8] Add IPIC config option   John Rigby
• [Add mpc5121 support PATCH v3 2/8] Add mpc512x ipic support   John Rigby
• [Add mpc5121 support PATCH v3 3/8] Basic Freescale MPC512x support   John Rigby
• [Add mpc5121 support PATCH v3 4/8] Device tree for MPC5121 ADS   John Rigby
• [Add mpc5121 support PATCH v3 5/8] Separate MPC52xx PSC FIFO registers from rest of PSC   John Rigby
• [Add mpc5121 support PATCH v3 6/8] Cleanup checkpatch.pl problems in mpc52xx_uart.c   John Rigby
• [Add mpc5121 support PATCH v3 7/8] Factor out 52xx dependencies from 52xx psc driver   John Rigby
• [Add mpc5121 support PATCH v3 8/8] Add MPC512x support to MPC52xx psc driver   John Rigby
• [RFC/PATCH 1/2] [POWERPC] mpc5200: normalize compatible property bindings   John Rigby
• [Add mpc5121 support PATCH v3 7/8] Factor out 52xx dependencies from 52xx psc driver   John Rigby
• [POWERPC] mpc5200: Factor out 52xx dependencies from 52xx psc driver   John Rigby
• [Add mpc5121 support PATCH v4 0/4] Basic Freescale MPC512x support   John Rigby
• [Add mpc5121 support PATCH v4 1/4] Basic Freescale MPC512x support   John Rigby
• [Add mpc5121 support PATCH v4 2/4] Device tree for MPC5121 ADS   John Rigby
• [Add mpc5121 support PATCH v4 3/4] Factor out 5200 dependencies from 52xx psc driver   John Rigby
• [Add mpc5121 support PATCH v4 4/4] Add MPC512x support to MPC52xx psc driver   John Rigby
• [PATCH] [POWERPC] 4xx: Add EMAC support to Kilauea defconfig   Stefan Roese
• [PATCH] Miscellaneous for Taco   Stefan Roese
• [PATCH] MTD for Taco   Stefan Roese
• [PATCH] ibm_newemac: Increase number of default rx-/tx-buffers   Stefan Roese
• [PATCH] ibm_newemac: Increase number of default rx-/tx-buffers   Stefan Roese
• [PATCH] i2c-ibm_iic driver   Stefan Roese
• [PATCH] i2c-ibm_iic driver   Stefan Roese
• [PATCH 3/4] mtd: Factor out OF partition support from the NOR driver.   Stefan Roese
• [PATCH] Miscellaneous for Taco   Stefan Roese
• [PATCH] Hwmon for Taco   Stefan Roese
• [PATCH] i2c-ibm_iic driver - new patch   Stefan Roese
• [PATCH] enable built-in networking for Sequoia defconfig   Stefan Roese
• PCI interrupt assignment on sequoia board   Stefan Roese
• ibm4xx_quiesce_eth?   Stefan Roese
• [PATCH 2/5] Warp Base Platform - dts   Stefan Roese
• [PATCH 1/5] Warp Base Platform   Stefan Roese
• [PATCH] ibm_newemac: Increase number of default rx-/tx-buffers   Stefan Roese
• [PATCH] MTD for Taco   Stefan Roese
• [PATCH] MTD for Taco   Stefan Roese
• [PATCH] MTD for Taco   Stefan Roese
• [PATCH 1/2] [POWERPC] 4xx: Add 405EXr to cputable   Stefan Roese
• [PATCH 2/2] [POWERPC] 4xx: Add AMCC Haleakala (405EXr) dts   Stefan Roese
• [PATCH] net: EMAC: Fix problem with mtu > 4080 on non TAH equipped 4xx PPC's   Stefan Roese
• [PATCH] net: EMAC: Fix problem with mtu > 4080 on non TAH equipped 4xx PPC's   Stefan Roese
• [PATCH 2/2] [POWERPC] 4xx: Add AMCC Haleakala (405EXr) dts   Stefan Roese
• [PATCH] net: EMAC: Fix problem with mtu > 4080 on non TAH equipped 4xx PPC's   Stefan Roese
• [PATCH] net: EMAC: Fix problem with mtu > 4080 on non TAH equipped 4xx PPC's   Stefan Roese
• [PATCH] net: NEWEMAC: Fix problem with mtu > 4080 on non TAH equipped 4xx PPC's   Stefan Roese
• [PATCH 2/2] [POWERPC] 4xx: Add AMCC Haleakala (405EXr) dts   Stefan Roese
• [PATCH] [POWERPC] 4xx: Remove "i2c" and "xxmii-interface" device_types from dts   Stefan Roese
• [PATCH] net: NEWEMAC: Remove "rgmii-interface" from rgmii matching table   Stefan Roese
• ppc: 4xx: sysctl table check failed: /kernel/l2cr .1.31 Missing strategy   Stefan Roese
• [PATCH] [POWERPC] 4xx: Remove "i2c" and "xxmii-interface" device_types from dts   Stefan Roese
• [PATCH][ppc] logical/bitand typo in powerpc/boot/4xx.c   Stefan Roese
• [PATCH] net: NEWEMAC: Remove "rgmii-interface" from rgmii matching table   Stefan Roese
• ndfc ecc byte order   Stefan Roese
• [PATCH][TRIVIAL] ibm_emac/ibm_emac_mal.c:mal_poll: Fix MAL_DBG2 invocation   Hal Rosenstock
• [PATCH] [POWERPC] therm_pm72: suppress some compile warnings   Stephen Rothwell
• [PATCHv2] i2c: adds support for i2c bus on Frescale CPM1/CPM2 controllers   Stephen Rothwell
• [patch] powerpc systbl.h broken   Stephen Rothwell
• [patch] powerpc systbl.h broken   Stephen Rothwell
• [PATCH] [POWERPC] arch/powerpc/kernel: use for_each_child_of_node   Stephen Rothwell
• [PATCH] [POWERPC] therm_windtunnel: eliminate some build warnings   Stephen Rothwell
• [PATCH] [POWERPC] therm_adt746x: eliminate some build warnings   Stephen Rothwell
• [PATCH] [POWERPC] Check that the syscall table matches the syscall numbers   Stephen Rothwell
• Test (Was: Re: [PATCH] [POWERPC] Check that the syscall table matches the syscall )   Stephen Rothwell
• [PATCH] [POWERPC] Check that the syscall table matches the syscall numbers   Stephen Rothwell
• [PATCH 2/3] add MPC837x USB platform support   Stephen Rothwell
• [PATCH 3/3] USB device tree cleanups   Stephen Rothwell
• [PATCH 3/7] sbc8560: add support for Wind River SBC8560 in arch/powerpc   Stephen Rothwell
• [PATCH] Use <linux/of_{platform, device}.h> and not <asm/...> variants.   Stephen Rothwell
• [RFC] Add of_find_matching_node() helper function   Stephen Rothwell
• [PATCH v2] [POWERPC] Update MPC8610 HPCD to support audio drivers   Stephen Rothwell
• [RFC 1/2] mpc5200: Add common clock setting routine mpc52xx_set_psc_clkdiv()   Stephen Rothwell
• [PATCH v6] qe: add ability to upload QE firmware   Stephen Rothwell
• [PATCH 3/8] pseries: phyp dump: reserve-release proof-of-concept   Stephen Rothwell
• [PATCH 2/8] pseries: phyp dump: config file   Stephen Rothwell
• [PATCH 4/8] pseries: phyp dump: use sysfs to release reserved mem   Stephen Rothwell
• [PATCH 5/8] pseries: phyp dump: register dump area.   Stephen Rothwell
• [PATCH 6/8] pseries: phyp dump: debugging print routines.   Stephen Rothwell
• [PATCH 7/8] pseries: phyp dump: Unregister and print dump areas.   Stephen Rothwell
• [PATCH] i2c-ibm_iic driver - new patch   Stephen Rothwell
• [PATCH] i2c-ibm_iic driver - new patch   Stephen Rothwell
• [PATCH] Use <linux/of_{platform, device}.h> and not <asm/...> variants.   Stephen Rothwell
• [PATCH 1/3] [POWERPC] Implement support for the GPIO LIB API   Stephen Rothwell
• [PATCH 4/7] [POWERPC] Xilinx: Add correct compatible list for device tree bus bindings.   Stephen Rothwell
• [PATCH 3/7] Basic Freescale MPC512x support   Stephen Rothwell
• [PATCH 7/7] Add MPC512x PSC serial driver   Stephen Rothwell
• [PATCH 2/3 v2] Add initial iomega StorCenter board port.   Stephen Rothwell
• [PATCH 7/7] Add MPC512x PSC serial driver   Stephen Rothwell
• [PATCH 3/7] sbc8560: add support for Wind River SBC8560 in arch/powerpc   Stephen Rothwell
• [PATCH V2] [POWERPC] Add common clock setting routine mpc52xx_psc_set_clkdiv()   Stephen Rothwell
• [PATCH 1/3] sbc834x: Add support for Wind River SBC834x boards   Stephen Rothwell
• [patch 2/4 v2] PS3: Add logical performance monitor repository routines   Stephen Rothwell
• [patch 2/4 v2] PS3: Add logical performance monitor repository routines   Stephen Rothwell
• [PATCH 2/3] [libata] pata_of_platform: OF-Platform PATA device driver   Stephen Rothwell
• [PATCH 2/3] [libata] pata_of_platform: OF-Platform PATA device driver   Stephen Rothwell
• [PATCH V3] [POWERPC] Add common clock setting routine mpc52xx_psc_set_clkdiv()   Stephen Rothwell
• [PATCH V3] [POWERPC] Add common clock setting routine mpc52xx_psc_set_clkdiv()   Stephen Rothwell
• Enable RTC for Ebony and Walnut (v2)   Stephen Rothwell
• [PATCH 1/5] Warp Base Platform   Stephen Rothwell
• [PATCH 1/5] Warp Base Platform   Stephen Rothwell
• [PATCH 1/5] Warp Base Platform   Stephen Rothwell
• [i2c] [PATCH 19 1/5] Implement module aliasing for i2c to translate from device tree names   Stephen Rothwell
• [PATCH 19 4/5] Convert PowerPC MPC i2c to of_platform_driver from platform_driver   Stephen Rothwell
• [PATCH 1/5] Warp Base Platform   Stephen Rothwell
• [PATCH 2/3] mpc82xx: Embedded Planet EP8248E support   Stephen Rothwell
• [PATCH 2/3] mtd: Factor out OF partition support from the NOR driver.   Stephen Rothwell
• [PATCH 3/3] Freescale enhanced Local Bus Controller FCM NAND support.   Stephen Rothwell
• [PATCH 3/3] Freescale enhanced Local Bus Controller FCM NAND support.   Stephen Rothwell
• [PATCH 2/3] mtd: Factor out OF partition support from the NOR driver.   Stephen Rothwell
• [PATCH] [POWERPC] make ibmebus use of_(un)register_driver   Stephen Rothwell
• [DTC PATCH] libfdt: Add ft_get_next_node(), ft_get_next_prop(), and ft_getprop_offset().   Stephen Rothwell
• [DTC PATCH] libfdt: Add ft_get_next_node(), ft_get_next_prop(), and ft_getprop_offset().   Stephen Rothwell
• [PATCH 1/4] powerpc: mv64x60 - Use early_* PCI accessors for hotswap reg   Stephen Rothwell
• [PATCH 1/4] powerpc: mv64x60 - Use early_* PCI accessors for hotswap reg   Stephen Rothwell
• [PATCH 4/4] powerpc: Katana750i - Add platform support   Stephen Rothwell
• emac/zmii link warnings   Stephen Rothwell
• emac/zmii link warnings   Stephen Rothwell
• [PATCH 1/2] 8xx: Analogue & Micro Adder875 board support.   Stephen Rothwell
• [PATCH 2/2] mpc82xx: Embedded Planet EP8248E support   Stephen Rothwell
• [PATCH 2/3] mtd: Factor out OF partition support from the NOR driver.   Stephen Rothwell
• [PATCH] [POWERPC] Add of_find_matching_node() helper function   Stephen Rothwell
• [Add mpc5121 support PATCH v2 3/8] Basic Freescale MPC512x support   Stephen Rothwell
• [PATCH 4/4 v2] powerpc: Katana750i - Add platform support   Stephen Rothwell
• [PATCH 1/5] Warp Base Platform   Stephen Rothwell
• [PATCH 1/2] Make setjmp/longjmp code generic   Stephen Rothwell
• [PATCH 1/2] Make setjmp/longjmp code generic   Stephen Rothwell
• [PATCH/RFCv2] [POWERPC] Add support for freescale watchdog to CPM serial driver.   Stephen Rothwell
• Patches added to master/for-2.6.25 branch of powerpc.git   Stephen Rothwell
• [PATCH] [POWERPC] Fix a couple of copyright symbols   Stephen Rothwell
• [PATCH v5] [POWERPC] Add LED driver for Promess Motion-PRO board.   Stephen Rothwell
• [RFC/PATCH 1/2] [POWERPC] mpc5200: normalize compatible property bindings   Stephen Rothwell
• [PATCH 1/2] 8xx: Analogue & Micro Adder875 board support.   Stephen Rothwell
• [PATCH] create modalias file in sysfs for bus vio   Stephen Rothwell
• [PATCH 2/4] Create and hook up of_platform_device_shutdown   Stephen Rothwell
• [PATCH 3/4] Convert axon_msi to an of_platform driver   Stephen Rothwell
• [PATCH v2] create modalias file in sysfs for bus of_platform   Stephen Rothwell
• [PATCH v3] create modalias file in sysfs for bus of_platform   Stephen Rothwell
• [PATCH] [POWERPC]: constify function pointer tables   Stephen Rothwell
• [PATCH 2/2] MPC8641 HPCN: publish all soc and flash devices   Stephen Rothwell
• [PATCH v2 2/2] MPC8641 HPCN: call of_platform_bus_probe()   Stephen Rothwell
• [PATCH 2/3 v3] Add initial iomega StorCenter board port.   Stephen Rothwell
• [PATCH 1/3] Rename i2c-mpc to i2c-mpc-drv in preparation for breaking out common code.   Stephen Rothwell
• [PATCH 2/3] Convert PowerPC MPC i2c to of_platform_driver from platform_driver   Stephen Rothwell
• [PATCH v6] [POWERPC] Add LED driver for Promess Motion-PRO board.   Stephen Rothwell
• [PATCH] [POWERPC] Move RapidIO support code from arch/ppc   Stephen Rothwell
• [PATCHv2 7/8] [POWERPC] Rename commproc to cpm1 and cpm2_common.c to cpm2.c   Stephen Rothwell
• [PATCH 3/4 v4] POWERPC: Add initial iomega StorCenter board port.   Stephen Rothwell
• [PATCH] [POWERPC] MPC8360E-RDK: device tree, board file and defconfig   Stephen Rothwell
• [PATCH] UCC TDM driver for QE based MPC83xx platforms.   Stephen Rothwell
• [PATCH 2/3] Platform changes for UCC TDM driver for MPC8323ERDB.Also includes related QE changes and dts entries.   Stephen Rothwell
• [PATCH] [POWERPC] 85xx: Port STX GP3 board over from arch/ppc   Stephen Rothwell
• [PATCH] [POWERPC] MPC8360E-RDK: device tree, board file and defconfig   Stephen Rothwell
• [PATCH for 2.6.24][NET] fs_enet: check for phydev existence in the ethtool handlers   Heiko Schocher
• [PATCH for 2.6.24][NET] fs_enet: check for phydev existence in the ethtool handlers   Heiko Schocher
• [PATCH for 2.6.24][NET] fs_enet: check for phydev existence in the ethtool handlers   Heiko Schocher
• [PATCH for 2.6.24][NET] fs_enet: check for phydev existence in the ethtool handlers   Heiko Schocher
• [PATCH 0/3] 82xx: MGCOGE support   Heiko Schocher
• [PATCH 1/4] 82xx: MGCOGE support   Heiko Schocher
• [PATCH 2/4] 82xx: MGCOGE support   Heiko Schocher
• [PATCH 3/4] 82xx: MGCOGE support   Heiko Schocher
• [PATCH 4/4] 82xx: MGCOGE support   Heiko Schocher
• [PATCH v2] 82xx: MGCOGE support   Heiko Schocher
• [PATCH] autodetect serial console on efika   Andreas Schwab
• Generic MMC-over-SPI binding?   Robert Schwebel
• add phy-handle property for fec_mpc52xx   Matt Sealey
• add phy-handle property for fec_mpc52xx   Matt Sealey
• add phy-handle property for fec_mpc52xx   Matt Sealey
• add phy-handle property for fec_mpc52xx   Matt Sealey
• add phy-handle property for fec_mpc52xx   Matt Sealey
• add phy-handle property for fec_mpc52xx   Matt Sealey
• add phy-handle property for fec_mpc52xx   Matt Sealey
• [RFC] add phy-handle property for fec_mpc52xx   Matt Sealey
• add phy-handle property for fec_mpc52xx   Matt Sealey
• [RFC] add phy-handle property for fec_mpc52xx   Matt Sealey
• I2C and CAN bus on MPC5200B device tree   Matt Sealey
• [PATCH 3/3] Add device tree compatible aliases to i2c drivers   Matt Sealey
• [i2c] [PATCH] update module-init-tools to support the i2c subsystem   Kay Sievers
• [PATCH] Fake NUMA emulation for PowerPC (Take 2)   Balbir Singh
• [PATCH] Fake NUMA emulation for PowerPC (Take 2)   Balbir Singh
• [PATCH] Fake NUMA emulation for PowerPC (Take 2)   Balbir Singh
• 2.6.24-rc8-mm1 Kernel oops will running kernbench   Balbir Singh
• [PATCH] Fake NUMA emulation for PowerPC (Take 2)   Balbir Singh
• [PATCH] Fake NUMA emulation for PowerPC (Take 2)   Balbir Singh
• [PATCH] Fake NUMA emulation for PowerPC (Take 2)   Balbir Singh
• [PATCH powerpc] Fake NUMA emulation for PowerPC (Take 3)   Balbir Singh
• [PATCH powerpc] Fake NUMA emulation for PowerPC (Take 3)   Balbir Singh
• PCI Failed to allocate mem for PCI ROM   Jiri Slaby
• PCI Failed to allocate mem for PCI ROM   Jiri Slaby
• PCI Failed to allocate mem for PCI ROM   Jiri Slaby
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Jon Smirl
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Jon Smirl
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Jon Smirl
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Jon Smirl
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Jon Smirl
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Jon Smirl
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Jon Smirl
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Jon Smirl
• [PATCH 4/5] Convert PowerPC MPC i2c to of_platform_driver from platform_driver   Jon Smirl
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Jon Smirl
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Jon Smirl
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Jon Smirl
• [PATCH 0/5] Version 17, series to add device tree naming to i2c   Jon Smirl
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Jon Smirl
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Jon Smirl
• [i2c] [PATCH 0/5] Version 17, series to add device tree naming to i2c   Jon Smirl
• [i2c] [PATCH 0/5] Version 17, series to add device tree naming to i2c   Jon Smirl
• [PATCH 19 0/5] Version 18, series to add device tree naming to i2c   Jon Smirl
• [PATCH 19 1/5] Implement module aliasing for i2c to translate from device tree names   Jon Smirl
• [PATCH 19 2/5] Modify several rtc drivers to use the alias names list property of i2c   Jon Smirl
• [PATCH 19 3/5] Clean up error returns   Jon Smirl
• [PATCH 19 4/5] Convert PowerPC MPC i2c to of_platform_driver from platform_driver   Jon Smirl
• [PATCH 19 5/5] Convert pfc8563 i2c driver from old style to new style   Jon Smirl
• [i2c] [PATCH 19 1/5] Implement module aliasing for i2c to translate from device tree names   Jon Smirl
• [i2c] [PATCH 0/5] Version 17, series to add device tree naming to i2c   Jon Smirl
• [i2c] [PATCH 1/5] Implement module aliasing for i2c to translate from device tree names   Jon Smirl
• [i2c] [PATCH] update module-init-tools to support the i2c subsystem   Jon Smirl
• [i2c] [PATCH 1/5] Implement module aliasing for i2c to translate from device tree names   Jon Smirl
• [i2c] [PATCH] update module-init-tools to support the i2c subsystem   Jon Smirl
• [PATCH 1/5] Implement module aliasing for i2c to translate from device tree names   Jon Smirl
• [i2c] [PATCH] update module-init-tools to support the i2c subsystem   Jon Smirl
• [PATCH 1/5] Implement module aliasing for i2c to translate from device tree names   Jon Smirl
• [i2c] [PATCH] update module-init-tools to support the i2c subsystem   Jon Smirl
• External audio clock with MPC5200B   Jon Smirl
• [i2c] [PATCH 19 3/5] Clean up error returns   Jon Smirl
• [i2c] [PATCH 19 3/5] Clean up error returns   Jon Smirl
• [PATCH 2/3] i2c: Convert all new-style drivers to use module aliasing   Jon Smirl
• [PATCH] mpc i2c driver, compare to NO_IRQ instead of zero   Jon Smirl
• [PATCH] Convert pfc8563 i2c driver from old style to new style   Jon Smirl
• [PATCH 1/3] Rename i2c-mpc to i2c-mpc-drv in preparation for breaking out common code.   Jon Smirl
• [PATCH 2/3] Convert PowerPC MPC i2c to of_platform_driver from platform_driver   Jon Smirl
• [PATCH 3/3] Add device tree compatible aliases to i2c drivers   Jon Smirl
• [PATCH 1/3] Rename i2c-mpc to i2c-mpc-drv in preparation for breaking out common code.   Jon Smirl
• [PATCH 1/3] Rename i2c-mpc to i2c-mpc-drv in preparation for breaking out common code.   Jon Smirl
• [PATCH 2/3] Convert PowerPC MPC i2c to of_platform_driver from platform_driver   Jon Smirl
• [PATCHv2] i2c: adds support for i2c bus on Frescale CPM1/CPM2 controllers   Jon Smirl
• [PATCH 2/3] Convert PowerPC MPC i2c to of_platform_driver from platform_driver   Jon Smirl
• [PATCH 3/3] Add device tree compatible aliases to i2c drivers   Jon Smirl
• [i2c] [PATCH] mpc i2c driver, compare to NO_IRQ instead of zero   Jon Smirl
• [i2c] [PATCH] mpc i2c driver, compare to NO_IRQ instead of zero   Jon Smirl
• [i2c] [PATCH 3/3] Add device tree compatible aliases to i2c drivers   Jon Smirl
• [i2c] [PATCH 3/3] Add device tree compatible aliases to i2c drivers   Jon Smirl
• [i2c] [PATCH] mpc i2c driver, compare to NO_IRQ instead of zero   Jon Smirl
• [i2c] [PATCH] Convert pfc8563 i2c driver from old style to new style   Jon Smirl
• Patches added to for-2.6.25/master branches of powerpc.git   Jon Smirl
• [PATCH 2/3] i2c: Convert all new-style drivers to use module aliasing   Jon Smirl
• [PATCH 0/3] Implement device tree based i2c module loading on mpc5200 powerpc   Jon Smirl
• [PATCH 1/3] Rename i2c-mpc to i2c-mpc-drv in preparation for breaking out common code.   Jon Smirl
• [PATCH 2/3] Convert PowerPC MPC i2c to of_platform_driver from platform_driver   Jon Smirl
• [PATCH 3/3] Add device tree compatible aliases to i2c drivers   Jon Smirl
• [PATCH] Convert PowerPC MPC i2c to of_platform_driver from platform_driver   Jon Smirl
• [PATCH for 2.6.24][NET] fs_enet: check for phydev existence in the ethtool handlers   Sergej Stepanov
• [PATCH for 2.6.24][NET] fs_enet: check for phydev existence in the ethtool handlers   Sergej Stepanov
• [PATCH 2/2] mpc82xx: Embedded Planet EP8248E support   Sergej Stepanov
• [PATCH 2/2] mpc82xx: Embedded Planet EP8248E support   Sergej Stepanov
• [patch v6 3/4] USB: add Cypress c67x00 OTG controller HCD driver   Alan Stern
• [patch v6 3/4] USB: add Cypress c67x00 OTG controller HCD driver   Alan Stern
• External Interrupt   Marco Stornelli
• [PATCH 1/8] pseries: phyp dump: Docmentation   Mike Strosaker
• [PATCH 0/2] [PPC 4xx] L2-cache synchronization for ppc44x   Eugene Surovegin
• [PATCH] ibm_newemac: Increase number of default rx-/tx-buffers   Eugene Surovegin
• [PATCH 0/2] [PPC 4xx] L2-cache synchronization for ppc44x   Eugene Surovegin
• [PATCH] ibm_newemac: Increase number of default rx-/tx-buffers   Eugene Surovegin
• [PATCH] net: EMAC: Fix problem with mtu > 4080 on non TAH equipped 4xx PPC's   Eugene Surovegin
• [PATCH] net: EMAC: Fix problem with mtu > 4080 on non TAH equipped 4xx PPC's   Eugene Surovegin
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [PATCH v2] ucc_uart: add support for Freescale QUICCEngine UART   Timur Tabi
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [PATCH 0/2] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [PATCH v2] [POWERPC] Update MPC8610 HPCD to support audio drivers   Timur Tabi
• [PATCH v2] [ALSA] Add ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [PATCH v5] qe: add ability to upload QE firmware   Timur Tabi
• [PATCH v6] qe: add ability to upload QE firmware   Timur Tabi
• [PATCH v3] ucc_uart: add support for Freescale QUICCEngine UART   Timur Tabi
• [PATCH v6] qe: add ability to upload QE firmware   Timur Tabi
• [PATCH v6] qe: add ability to upload QE firmware   Timur Tabi
• [PATCH v7] qe: add ability to upload QE firmware   Timur Tabi
• [PATCH 0/2] Add support for Freescale QUICCEngine UART   Timur Tabi
• [PATCH] [POWERPC] qe: add support for Freescale QUICCEngine UART   Timur Tabi
• [PATCH] [SERIAL] qe-uart: add support for Freescale QUICCEngine UART   Timur Tabi
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [PATCH 0/2] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [PATCH v3] [POWERPC] Update MPC8610 HPCD to support audio drivers   Timur Tabi
• [PATCH v2] [ALSA] Add ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [alsa-devel] [PATCH v2] [ALSA] Add ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [alsa-devel] [PATCH v2] [ALSA] Add ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [alsa-devel] [PATCH v2] [ALSA] Add ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• Quick Engine Support on Kernel 2.4   Timur Tabi
• [PATCH] [SERIAL] qe-uart: add support for Freescale QUICCEngine UART   Timur Tabi
• [PATCH v2] [SERIAL] qe-uart: add support for Freescale QUICCEngine UART   Timur Tabi
• [alsa-devel] [PATCH v3] [POWERPC] Update MPC8610 HPCD to support audio drivers   Timur Tabi
• [PATCH v4] [POWERPC] Update MPC8610 HPCD to support audio drivers   Timur Tabi
• [PATCH] [POWERPC] Add docs for Freescale DMA & DMA channel device tree nodes   Timur Tabi
• [PATCH] UCC TDM driver for QE based MPC83xx platforms.   Timur Tabi
• [PATCH UCC TDM 1/3 Updated] Platform changes for UCC TDM driver for MPC8323eRDB. Also includes related QE changes and dts entries.   Timur Tabi
• [PATCH UCC TDM 1/3 Updated] Platform changes for UCC TDM driver for MPC8323eRDB. Also includes related QE changes and dts entries.   Timur Tabi
• drivers/char/hvc_* and /Documentation/powerpc/hvcs.txt   Timur Tabi
• [patch 4/4 v2] PS3: Add logical performance monitor driver support   TakashiYamamoto
• [PATCH 0/2] [PPC 4xx] L2-cache synchronization for ppc44x   Yuri Tikhonov
• [PATCH 0/3] UCC TDM driver for MPC83xx platforms   Joakim Tjernlund
• [PATCh v3] powerpc: add hugepagesz boot-time parameter   Jon Tollefson
• [PATCh v3] powerpc: add hugepagesz boot-time parameter   Jon Tollefson
• SCSI errors on powerpc with 2.6.24-rc6-mm1   FUJITA Tomonori
• Help with device tree binding for SMC serial   Rune Torgersen
• Help with device tree binding for SMC serial   Rune Torgersen
• Help with device tree binding for SMC serial   Rune Torgersen
• Help with device tree binding for SMC serial   Rune Torgersen
• Help with device tree binding for SMC serial   Rune Torgersen
• Help with device tree binding for SMC serial   Rune Torgersen
• Help with device tree binding for SMC serial   Rune Torgersen
• Help with device tree binding for SMC serial   Rune Torgersen
• Device Tree & PCI   Rune Torgersen
• Device Tree & PCI   Rune Torgersen
• Fixed phy   Rune Torgersen
• Problems with PCI on 8280   Rune Torgersen
• Problems with PCI on 8280   Rune Torgersen
• Problems with PCI on 8280   Rune Torgersen
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Mike Travis
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Mike Travis
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Mike Travis
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Mike Travis
• [PATCH 2/6] percpu: Change Kconfig to HAVE_SETUP_PER_CPU_AREA linux-2.6.git   Mike Travis
• [PATCH] [NET]: Remove PowerPC code from fec.c   Greg Ungerer
• [patch 2/4 v2] PS3: Add logical performance monitor repository routines   Geert Uytterhoeven
• [patch 4/4 v2] PS3: Add logical performance monitor driver support   Geert Uytterhoeven
• [patch 4/4 v3] PS3: Add logical performance monitor driver support   Geert Uytterhoeven
• [PATCH] ps3: vuart: semaphore to mutex   Geert Uytterhoeven
• [PATCH 0/2] ps3fb fixes for 2.6.24   Geert Uytterhoeven
• [PATCH 1/2] ps3fb: prevent use after free of fb_info   Geert Uytterhoeven
• [PATCH 2/2] ps3fb: fix deadlock on kexec()   Geert Uytterhoeven
• [i2c] [PATCH] update module-init-tools to support the i2c subsystem   Geert Uytterhoeven
• [i2c] [PATCH] update module-init-tools to support the i2c subsystem   Geert Uytterhoeven
• [patch 06/18] PS3: Fix kexec storage probe   Geert Uytterhoeven
• [PATCH] autodetect serial console on efika   Geert Uytterhoeven
• [Cbe-oss-dev] [PATCH 3/3] Cell IOMMU static mapping support   Geert Uytterhoeven
• [PATCH] [NET]: Remove PowerPC code from fec.c   Geert Uytterhoeven
• [patch 00/11] ps3av/3fb patches for 2.6.25   Geert Uytterhoeven
• [patch 01/11] ps3av: ps3av_get_scanmode() and ps3av_get_refresh_rate() are unused   Geert Uytterhoeven
• [patch 02/11] ps3: Use symbolic names for video modes   Geert Uytterhoeven
• [patch 03/11] ps3fb: Kill PS3FB_FULL_MODE_BIT   Geert Uytterhoeven
• [patch 04/11] ps3fb: Inline macros that are used only once   Geert Uytterhoeven
• [patch 05/11] ps3fb: Kill ps3fb_res   Geert Uytterhoeven
• [patch 06/11] ps3fb: Make frame buffer offsets unsigned int   Geert Uytterhoeven
• [patch 07/11] ps3fb: Add support for configurable black borders   Geert Uytterhoeven
• [patch 08/11] ps3fb: Reorganize modedb handling   Geert Uytterhoeven
• [patch 09/11] ps3fb: Round up video modes   Geert Uytterhoeven
• [patch 10/11] ps3fb: Cleanup sweep   Geert Uytterhoeven
• [patch 11/11] ps3fb: Fix modedb typos   Geert Uytterhoeven
• [patch 04/11] ps3fb: Inline macros that are used only once   Geert Uytterhoeven
• [patch 00/11] ps3av/3fb patches for 2.6.25   Geert Uytterhoeven
• [patch 09/11] ps3fb: Round up video modes   Geert Uytterhoeven
• [patch 00/11] ps3av/3fb patches for 2.6.25   Geert Uytterhoeven
• x86/non-x86: percpu, node ids, apic ids x86.git fixup   Geert Uytterhoeven
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Srivatsa Vaddagiri
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Srivatsa Vaddagiri
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Srivatsa Vaddagiri
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Srivatsa Vaddagiri
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Srivatsa Vaddagiri
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Srivatsa Vaddagiri
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Srivatsa Vaddagiri
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Srivatsa Vaddagiri
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Srivatsa Vaddagiri
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Srivatsa Vaddagiri
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Srivatsa Vaddagiri
• [PATCH 3/8] pseries: phyp dump: reserve-release proof-of-concept   Linas Vepstas
• [PATCH 4/8] pseries: phyp dump: use sysfs to release reserved mem   Linas Vepstas
• [PATCH 1/8] pseries: phyp dump: Docmentation   Linas Vepstas
• [PATCH 1/8] pseries: phyp dump: Docmentation   Linas Vepstas
• [PATCH 1/8] pseries: phyp dump: Docmentation   Linas Vepstas
• [PATCH 1/8] pseries: phyp dump: Docmentation   Linas Vepstas
• [PATCH 1/8] pseries: phyp dump: Docmentation   Linas Vepstas
• [PATCH 1/8] pseries: phyp dump: Docmentation   Linas Vepstas
• [PATCH 1/8] pseries: phyp dump: Docmentation   Linas Vepstas
• [PATCH v2] ucc_uart: add support for Freescale QUICCEngine UART   Anton Vorontsov
• [PATCH v4 0/4] device_type/compatible cleanups   Anton Vorontsov
• [PATCH 1/4] [POWERPC] qe_lib and users: get rid of device_types and model   Anton Vorontsov
• [PATCH 2/4] [POWERPC][NET] ucc_geth_mii and users: get rid of device_type   Anton Vorontsov
• [PATCH 3/4] [POWERPC][SPI] use brg-frequency for SPI in QE   Anton Vorontsov
• [PATCH 4/4] [POWERPC] fsl_spi_init and users: stop using device_type = "spi"   Anton Vorontsov
• [PATCH RFC 0/3] PowerPC: implement support for GPIO LIB API   Anton Vorontsov
• [PATCH 1/3] [POWERPC] Implement support for the GPIO LIB API   Anton Vorontsov
• [PATCH 2/3] [POWERPC] QE: split par_io_config_pin()   Anton Vorontsov
• [PATCH 3/3] [POWERPC] QE: implement GPIO LIB API   Anton Vorontsov
• [PATCH for 2.6.24][NET] fs_enet: check for phydev existence in the ethtool handlers   Anton Vorontsov
• [PATCH] Hwmon for Taco   Anton Vorontsov
• [PATCH v4 0/3] OF-platform PATA driver   Anton Vorontsov
• [PATCH 1/3] [libata] pata_platform: make probe and remove functions device type neutral   Anton Vorontsov
• [PATCH 2/3] [libata] pata_of_platform: OF-Platform PATA device driver   Anton Vorontsov
• [PATCH 3/3] [POWERPC] MPC8349E-mITX: introduce localbus and pata nodes   Anton Vorontsov
• [PATCH 1/3] [NET] phy/fixed.c: rework to not duplicate PHY layerfunctionality   Anton Vorontsov
• [PATCH v4 0/3] OF-platform PATA driver   Anton Vorontsov
• Fixed phy   Anton Vorontsov
• [PATCH/RFC] [POWERPC] CPM1: implement GPIO LIB API   Anton Vorontsov
• Patches added to master/for-2.6.25 branch of powerpc.git   Anton Vorontsov
• Patches added to master/for-2.6.25 branch of powerpc.git   Anton Vorontsov
• [PATCH] [NET] cpmac: convert to new Fixed PHY infrastructure (was: Re: fixed phy support (warning related to FIXED_MII_100_FDX))   Anton Vorontsov
• mpc8568e-mds: pci-e is broken   Anton Vorontsov
• mpc8568e-mds: pci-e is broken   Anton Vorontsov
• [PATCH] [POWERPC] MPC8360E-RDK: device tree, board file and defconfig   Anton Vorontsov
• [PATCH] [POWERPC] MPC8360E-RDK: device tree, board file and defconfig   Anton Vorontsov
• mpc8568e-mds: pci-e is broken   Anton Vorontsov
• [PATCH v5 0/5] device_type/compatible cleanups   Anton Vorontsov
• [PATCH 1/5] [POWERPC] qe_lib and users: get rid of most device_types and model   Anton Vorontsov
• [PATCH 2/5] [POWERPC][NET] ucc_geth_mii and users: get rid of device_type   Anton Vorontsov
• [PATCH 3/5] [POWERPC][SPI] use brg-frequency for SPI in QE   Anton Vorontsov
• [PATCH 4/5] [POWERPC] fsl_spi_init and users: stop using device_type = "spi"   Anton Vorontsov
• [PATCH 5/5] [POWERPC] fsl_soc, legacy_serial: add support for "soc" compatible matching   Anton Vorontsov
• [PATCH UCC TDM 1/3 Updated] Platform changes for UCC TDM driver for MPC8323eRDB. Also includes related QE changes and dts entries.   Anton Vorontsov
• [PATCH 2/5] [POWERPC][NET] ucc_geth_mii and users: get rid of device_type   Anton Vorontsov
• [PATCH UCC TDM 1/3 Updated] Platform changes for UCC TDM driver for MPC8323eRDB. Also includes related QE changes and dts entries.   Anton Vorontsov
• [PATCH UCC TDM 1/3 Updated] Platform changes for UCC TDM driver for MPC8323eRDB. Also includes related QE changes and dts entries.   Anton Vorontsov
• [PATCH v5 0/5] device_type/compatible cleanups   Anton Vorontsov
• [PATCH v3] [POWERPC] MPC8360E-RDK: device tree, board file and defconfig   Anton Vorontsov
• [PATCH 6/5] [POWERPC] get rid of `model = "UCC"' in the ucc nodes   Anton Vorontsov
• [PATCH 5/5] [POWERPC] fsl_soc, legacy_serial: add support for "soc" compatible matching   Anton Vorontsov
• [PATCH 5/5] [POWERPC] fsl_soc, legacy_serial: add support for "soc" compatible matching   Anton Vorontsov
• [PATCH 5/5] [POWERPC] fsl_soc, legacy_serial: add support for "soc" compatible matching   Anton Vorontsov
• [PATCH 5/5] [POWERPC] fsl_soc, legacy_serial: add support for "soc" compatible matching   Anton Vorontsov
• [PATCH 3/3] [POWERPC] QE: implement GPIO LIB API   Anton Vorontsov
• [PATCH 3/3] [POWERPC] QE: implement GPIO LIB API   Anton Vorontsov
• [PATCH] ps3: vuart: semaphore to mutex   Daniel Walker
• [PATCH] ps3: vuart: semaphore to mutex   Daniel Walker
• printk() does not work on UART1   Haiying Wang
• [PATCH 2/3] (Resend part #1) Add the RapidIO support to powerpcarchitecture with memory mapping support.   Zhang Wei
• [PATCH 1/6] Change RIO function mpc85xx_ to fsl_ .   Zhang Wei
• [PATCH 2/6] Add RapidIO option to kernel configuration.   Zhang Wei
• [PATCH 3/6] Move include/asm-ppc/rio.h to include/asm-powerpc/rio.h   Zhang Wei
• [PATCH 4/6] Add multi mport support.   Zhang Wei
• [PATCH 5/6] Add OF-tree support to RapidIO controller driver.   Zhang Wei
• [PATCH 6/6] Change the kernel configurated RapidIO system size to auto-probing.   Zhang Wei
• [PATCH 3/6] Move include/asm-ppc/rio.h to include/asm-powerpc/rio.h   Zhang Wei
• [PATCH 4/6] Add multi mport support.   Zhang Wei
• [PATCH 1/6] Change RIO function mpc85xx_ to fsl_ .   Zhang Wei
• [PATCH 4/6] Add multi mport support.   Zhang Wei
• [PATCH 1/2] Add RapidIO node into MPC8641HPCN dts file   Zhang Wei
• [PATCH 1/2] Add RapidIO node into MPC8641HPCN dts file   Zhang Wei
• [PATCH 2/2] Add RapidIO node probing into MPC86xx_HPCN board id table.   Zhang Wei
• [PATCH][ppc] logical/bitand typo in powerpc/boot/4xx.c   Andy Whitcroft
• [PATCH] Various new ibm405 DCRN #defines   Joshua Williams
• [PATCH] Various new ibm405 DCRN #defines   Joshua Williams
• [PATCH] Various new ibm405 DCRN #defines   Joshua Williams
• [PATCH] change where the kernel loads   Mike Wolf
• [PATCH/RFC] Add support for freescale watchdog to CPM serial driver.   Scott Wood
• [PATCH/RFC] powerpc: DBox2 Board Support   Scott Wood
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Scott Wood
• [PATCH v2] ucc_uart: add support for Freescale QUICCEngine UART   Scott Wood
• [PATCH/RFC] powerpc: DBox2 Board Support   Scott Wood
• [PATCH 4/5] [POWERPC] 8xx: Use machine_*_initcall() hooks in platform code   Scott Wood
• [PATCH v2] ucc_uart: add support for Freescale QUICCEngine UART   Scott Wood
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Scott Wood
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Scott Wood
• [PATCH 1/3] Add yyerrorf() for formatted error messages.   Scott Wood
• [PATCH 2/3] Look for include files in the directory of the including file.   Scott Wood
• [PATCH 3/3] Return a non-zero exit code if an error occurs during dts parsing.   Scott Wood
• [PATCH 1/3] Add yyerrorf() for formatted error messages.   Scott Wood
• [PATCH 1/3] Add yyerrorf() for formatted error messages.   Scott Wood
• [PATCH 1/3] Add support for binary includes.   Scott Wood
• [PATCH 2/3] Handle absolute pathnames correctly in dtc_open_file.   Scott Wood
• [PATCH 3/3] Remove \n from yyerror() call.   Scott Wood
• [PATCH 2/3] Handle absolute pathnames correctly in dtc_open_file.   Scott Wood
• [PATCH 2/3] Look for include files in the directory of the including file.   Scott Wood
• [PATCH 3/3] Return a non-zero exit code if an error occurs during dts parsing.   Scott Wood
• [PATCH 1/3] Add support for binary includes.   Scott Wood
• [DTC PATCH 1/2] Convert malloc() uses to xmalloc().   Scott Wood
• [DTC PATCH 2/2] Preserve scanner state when /include/ing.   Scott Wood
• [RFC PATCH 2/3] Add initial iomega StorCenter board port.   Scott Wood
• [RFC PATCH 2/3] Add initial iomega StorCenter board port.   Scott Wood
• [PATCH] i2c-ibm_iic driver - new patch   Scott Wood
• How to write a device driver in such a fashion .????   Scott Wood
• [PATCH 1/3] add default device trees for MPC837x MDS board   Scott Wood
• [PATCH 2/4] nand base: Give drivers a chance to do late initialization.   Scott Wood
• [PATCH 3/7] Basic Freescale MPC512x support   Scott Wood
• [PATCH 4/7] Device tree for MPC5121 ADS   Scott Wood
• [PATCH 3/7] Basic Freescale MPC512x support   Scott Wood
• Generic desktop/server/laptop lable is confusing [Was Re: [PATCH 3/7] Basic Freescale MPC512x support]   Scott Wood
• [PATCH 1/3 v2] Add StorCenter DTS first draft.   Scott Wood
• [PATCH 1/3 v2] Add StorCenter DTS first draft.   Scott Wood
• [PATCH for 2.6.24][NET] fs_enet: check for phydev existence in the ethtool handlers   Scott Wood
• [PATCH 2/3 v2] Add initial iomega StorCenter board port.   Scott Wood
• [PATCH] [POWERPC] Fix handling of memreserve if the range lands in highmem   Scott Wood
• [PATCH] [POWERPC] Fix handling of memreserve if the range lands in highmem   Scott Wood
• Help with device tree binding for SMC serial   Scott Wood
• [PATCH] [POWERPC] Fix handling of memreserve if the range lands in highmem   Scott Wood
• Help with device tree binding for SMC serial   Scott Wood
• Help with device tree binding for SMC serial   Scott Wood
• [PATCH 3/3] Return a non-zero exit code if an error occurs during dts parsing.   Scott Wood
• [PATCH] [POWERPC] Fix handling of memreserve if the range lands in highmem   Scott Wood
• [PATCH for 2.6.24][NET] fs_enet: check for phydev existence in the ethtool handlers   Scott Wood
• Help with device tree binding for SMC serial   Scott Wood
• Help with device tree binding for SMC serial   Scott Wood
• [PATCH v3] [POWERPC] Update MPC8610 HPCD to support audio drivers   Scott Wood
• Help with device tree binding for SMC serial   Scott Wood
• Help with device tree binding for SMC serial   Scott Wood
• Device Tree & PCI   Scott Wood
• [DTC PATCH] Remove const from dtc_file::dir.   Scott Wood
• [PATCH 1/3] 8xx: Analogue & Micro Adder875 board support.   Scott Wood
• [PATCH 2/3] mpc82xx: Embedded Planet EP8248E support   Scott Wood
• [PATCH 3/3] Update .gitignore for dtc.   Scott Wood
• [PATCH] fsl_soc: Fix get_immrbase() to use ranges, rather than reg.   Scott Wood
• [PATCH 1/3] nand base: Don't panic if a controller driver does ecc its own way.   Scott Wood
• [PATCH 2/3] mtd: Factor out OF partition support from the NOR driver.   Scott Wood
• [PATCH 3/3] Freescale enhanced Local Bus Controller FCM NAND support.   Scott Wood
• [PATCH 1/3] 8xx: Analogue & Micro Adder875 board support.   Scott Wood
• [PATCH] fsl_soc: Fix get_immrbase() to use ranges, rather than reg.   Scott Wood
• [DTC PATCH] libfdt: Add ft_get_next_node(), ft_get_next_prop(), and ft_getprop_offset().   Scott Wood
• I2C and CAN bus on MPC5200B device tree   Scott Wood
• [DTC PATCH] libfdt: Add ft_get_next_node(), ft_get_next_prop(), and ft_getprop_offset().   Scott Wood
• [PATCH 1/3] 8xx: Analogue & Micro Adder875 board support.   Scott Wood
• [PATCH] fsl_soc: Fix get_immrbase() to use ranges, rather than reg.   Scott Wood
• [DTC PATCH] libfdt: Add ft_get_next_node(), ft_get_next_prop(), and ft_getprop_offset().   Scott Wood
• [PATCH] fsl_soc: Fix get_immrbase() to use ranges, rather than reg.   Scott Wood
• [PATCH 1/2] [POWERPC] 4xx: Add 405EXr to cputable   Scott Wood
• [PATCH 1/2] [POWERPC] 4xx: Add 405EXr to cputable   Scott Wood
• [PATCH] change where the kernel loads   Scott Wood
• [PATCH 1/2] 8xx: Analogue & Micro Adder875 board support.   Scott Wood
• [PATCH 2/2] mpc82xx: Embedded Planet EP8248E support   Scott Wood
• [PATCH 2/3] mtd: Factor out OF partition support from the NOR driver.   Scott Wood
• [PATCH 1/2] mtd: Factor out OF partition support from the NOR driver.   Scott Wood
• [PATCH 2/2] Freescale enhanced Local Bus Controller FCM NAND support.   Scott Wood
• [PATCH/RFC] [POWERPC] CPM1: implement GPIO LIB API   Scott Wood
• Problems with PCI on 8280   Scott Wood
• [PATCH 2/7] powerpc: allow localbus compatible serial ports for console device   Scott Wood
• [PATCH 1/2] 8xx: Analogue & Micro Adder875 board support.   Scott Wood
• [PATCH 2/2] mpc82xx: Embedded Planet EP8248E support   Scott Wood
• [PATCH 1/3] mpc8313erdb: Add NAND to device tree, and call of_platform_bus_probe().   Scott Wood
• [PATCH 2/3] mpc8313erdb: Add NOR flash to the device tree.   Scott Wood
• [PATCH 3/3] Update mpc8313erdb defconfig for MTD, NAND, JFFS2.   Scott Wood
• Problems with PCI on 8280   Scott Wood
• [PATCH 2/2] mpc82xx: Embedded Planet EP8248E support   Scott Wood
• [PATCH/RFCv2] [POWERPC] Add support for freescale watchdog to CPM serial driver.   Scott Wood
• Problems with PCI on 8280   Scott Wood
• [PATCH/RFCv2] [POWERPC] Add support for freescale watchdog to CPM serial driver.   Scott Wood
• patches for 2.6.25   Scott Wood
• [PATCH] adder875: Fix flash bus-width and remove duplicate __initdata.   Scott Wood
• [PATCH] adder875: Fix flash bus-width and remove duplicate __initdata.   Scott Wood
• [PATCH] [POWERPC] Add docs for Freescale DMA & DMA channel device tree nodes   Scott Wood
• [PATCH 1/3 v3] Add StorCenter DTS first draft.   Scott Wood
• how to handle TARGET_CPM in cuboot-85xx?   Scott Wood
• [PATCH UCC TDM 3/3 ] Modified Documentation to explain dts entries for TDM driver   Scott Wood
• [PATCH] [POWERPC] 85xx: Port STX GP3 board over from arch/ppc   Scott Wood
• [PATCH UCC TDM 1/3 Updated] Platform changes for UCC TDM driver for MPC8323eRDB. Also includes related QE changes and dts entries.   Scott Wood
• [PATCH 3/10] CPM2: Make support for the CPM2 optional on 8560 based boards   Scott Wood
• [i2c] [PATCH 3/3] Add device tree compatible aliases to i2c drivers   Scott Wood
• [PATCH v2] [POWERPC] 85xx: Port STX GP3 board over from arch/ppc   Scott Wood
• [PATCH UCC TDM 3/3 ] Modified Documentation to explain dtsentries for TDM driver   Scott Wood
• [PATCH 5/5] [POWERPC] fsl_soc, legacy_serial: add support for "soc" compatible matching   Scott Wood
• [PATCH 5/5] [POWERPC] fsl_soc, legacy_serial: add support for "soc" compatible matching   Scott Wood
• PATCH[1/1] 8xx: Add clock-frequency to .dts brg entries   Scott Wood
• [PATCHv3 2.6.25] i2c: adds support for i2c bus on Freescale CPM1/CPM2 controllers   Scott Wood
• request_irq() for external interrupt pin on MPC875 (A&M adder MPC 875)   Scott Wood
• PATCH[1/1] 8xx: Add clock-frequency to .dts brg entries   Scott Wood
• [PATCH 0/3] 82xx: MGCOGE support   Scott Wood
• [PATCH 3/4] 82xx: MGCOGE support   Scott Wood
• [PATCH 4/4] 82xx: MGCOGE support   Scott Wood
• [PATCH 4/4] 82xx: MGCOGE support   Scott Wood
• [PATCH 2/4] nand base: Give drivers a chance to do late initialization.   David Woodhouse
• [PATCH 3/4] mtd: Factor out OF partition support from the NOR driver.   David Woodhouse
• add phy-handle property for fec_mpc52xx   David Woodhouse
• add phy-handle property for fec_mpc52xx   David Woodhouse
• [PATCHv3 2.6.25] i2c: adds support for i2c bus on Freescale CPM1/CPM2 controllers   Bryan Wu
• [PATCH 1/3] add default device trees for MPC837x MDS board   Li Yang
• [PATCH 2/3] add MPC837x USB platform support   Li Yang
• [PATCH 3/3] USB device tree cleanups   Li Yang
• [PATCH 3/3] USB device tree cleanups   Li Yang
• [PATCH] add MPC837x MDS board default device tree   Li Yang
• [PATCH 2/3 v2] add MPC837x USB platform support   Li Yang
• [PATCH 3/3 v2] USB device tree cleanups   Li Yang
• [PATCH 1/3] add default device trees for MPC837x MDS board   Li Yang
• [PATCH] Convert MPC837x device trees to dts-v1   Li Yang
• [PATCH 1/3] add default device trees for MPC837x MDS board   Li Yang
• [PATCH] Fix carry bug in 128-bit unsigned integer adding   Liu Yu
• [PATCH] Fix remainder calculating bug in single floating point division   Liu Yu
• [PATCH] Fix remainder calculating bug in single floating point division   Liu Yu
• [PATCH] Fix carry bug in 128-bit unsigned integer adding   Liu Yu
• [PATCH] Fix remainder calculating bug in single floating pointdivision   Liu Yu
• [PATCH] Fix carry bug in 128-bit unsigned integer adding   Liu Yu
• patches for 2.6.25   Liu Yu
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Peter Zijlstra
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Peter Zijlstra
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Peter Zijlstra
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Peter Zijlstra
• ppc32: Weird process scheduling behaviour with 2.6.24-rc   Peter Zijlstra
• [PATCH] ppc: fix #ifdef-s in mediabay driver   Bartlomiej Zolnierkiewicz
• [PATCH] ppc: fix #ifdef-s in mediabay driver   Bartlomiej Zolnierkiewicz
• [PATCH] ppc: fix #ifdef-s in mediabay driver   Bartlomiej Zolnierkiewicz
• ppc64 vecemu compile failure   maximilian attems
• [PATCH 1/2] Add RapidIO node into MPC8641HPCN dts file   y at az33smr01.freescale.net
• [PATCH 2/2] Add RapidIO node probing into MPC86xx_HPCN board id table.   y at az33smr01.freescale.net
• How to creat a .config file for a driver and How to use it in a device driver?????   Misbah khan
• How to creat a .config file for a driver and How to use it in adevice driver?????   Misbah khan
• How to write a device driver in such a fashion .????   Misbah khan
• How to write a device driver in such a fashion .????   Misbah khan
• configuring macrowindow for x86 platform and creating a display window????   Misbah khan
• L3CR   linuxppcdev at lists.qbjnet.com
• Fw:   rsa
• Fw: Funny :)   rsa
•   rsa
• [PATCH 1/6] modules: Fold percpu_modcopy into module.c linux-2.6.git   travis at sgi.com
• [PATCH 2/6] percpu: Change Kconfig to HAVE_SETUP_PER_CPU_AREA linux-2.6.git   travis at sgi.com
• printk() does not work on UART1   mike zheng
• printk() does not work on UART1   mike zheng
• printk() does not work on UART1   mike zheng
• Quick Engine Support on Kernel 2.4   mike zheng
• help   张自强