[PATCH 4/9] mpc836x: Convert mpc836x_mds to dts-v1 format.

Paul Gortmaker paul.gortmaker at windriver.com
Mon Jan 28 18:27:54 EST 2008


Convert the MPC836x MDS dts file to v1 format.  Entries for
values normally parsed by humans are left in decimal (i.e. IRQ,
cache size, clock rates, basic counts and index values).

Signed-off-by: Paul Gortmaker <paul.gortmaker at windriver.com>
---
 arch/powerpc/boot/dts/mpc836x_mds.dts |  254 +++++++++++++++++----------------
 1 files changed, 128 insertions(+), 126 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 10b5d6d..4260f09 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -14,6 +14,8 @@
 /memreserve/	00000000 1000000;
 */
 
+/dts-v1/;
+
 / {
 	model = "MPC8360MDS";
 	compatible = "MPC8360EMDS", "MPC836xMDS", "MPC83xxMDS";
@@ -35,38 +37,38 @@
 		PowerPC,8360 at 0 {
 			device_type = "cpu";
 			reg = <0>;
-			d-cache-line-size = <20>;	// 32 bytes
-			i-cache-line-size = <20>;	// 32 bytes
-			d-cache-size = <8000>;		// L1, 32K
-			i-cache-size = <8000>;		// L1, 32K
-			timebase-frequency = <3EF1480>;
-			bus-frequency = <FBC5200>;
-			clock-frequency = <1F78A400>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <32768>;		// L1, 32K
+			i-cache-size = <32768>;		// L1, 32K
+			timebase-frequency = <66000000>;
+			bus-frequency = <264000000>;
+			clock-frequency = <528000000>;
 		};
 	};
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 10000000>;
+		reg = <0x00000000 0x10000000>;
 	};
 
 	bcsr at f8000000 {
 		device_type = "board-control";
-		reg = <f8000000 8000>;
+		reg = <0xf8000000 0x8000>;
 	};
 
 	soc8360 at e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		ranges = <0 e0000000 00100000>;
-		reg = <e0000000 00000200>;
-		bus-frequency = <FBC5200>;
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <264000000>;
 
 		wdt at 200 {
 			device_type = "watchdog";
 			compatible = "mpc83xx_wdt";
-			reg = <200 100>;
+			reg = <0x200 0x100>;
 		};
 
 		i2c at 3000 {
@@ -74,14 +76,14 @@
 			#size-cells = <0>;
 			cell-index = <0>;
 			compatible = "fsl-i2c";
-			reg = <3000 100>;
-			interrupts = <e 8>;
-			interrupt-parent = < &ipic >;
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
 			dfsrr;
 
 			rtc at 68 {
 				compatible = "dallas,ds1374";
-				reg = <68>;
+				reg = <0x68>;
 			};
 		};
 
@@ -90,9 +92,9 @@
 			#size-cells = <0>;
 			cell-index = <1>;
 			compatible = "fsl-i2c";
-			reg = <3100 100>;
-			interrupts = <f 8>;
-			interrupt-parent = < &ipic >;
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
 			dfsrr;
 		};
 
@@ -100,46 +102,46 @@
 			cell-index = <0>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4500 100>;
-			clock-frequency = <FBC5200>;
-			interrupts = <9 8>;
-			interrupt-parent = < &ipic >;
+			reg = <0x4500 0x100>;
+			clock-frequency = <264000000>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
 		};
 
 		serial1: serial at 4600 {
 			cell-index = <1>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4600 100>;
-			clock-frequency = <FBC5200>;
-			interrupts = <a 8>;
-			interrupt-parent = < &ipic >;
+			reg = <0x4600 0x100>;
+			clock-frequency = <264000000>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
 		};
 
 		crypto at 30000 {
 			device_type = "crypto";
 			model = "SEC2";
 			compatible = "talitos";
-			reg = <30000 10000>;
-			interrupts = <b 8>;
-			interrupt-parent = < &ipic >;
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
 			num-channels = <4>;
-			channel-fifo-len = <18>;
-			exec-units-mask = <0000007e>;
+			channel-fifo-len = <0x18>;
+			exec-units-mask = <0x0000007e>;
 			/* desc mask is for rev1.x, we need runtime fixup for >=2.x */
-			descriptor-types-mask = <01010ebf>;
+			descriptor-types-mask = <0x01010ebf>;
 		};
 
 		ipic: pic at 700 {
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
-			reg = <700 100>;
+			reg = <0x700 0x100>;
 			device_type = "ipic";
 		};
 
 		par_io at 1400 {
-			reg = <1400 100>;
+			reg = <0x1400 0x100>;
 			device_type = "par_io";
 			num-ports = <7>;
 
@@ -153,19 +155,19 @@
 					1  6  1  0  3  0 	/* TxD4 */
 					1  7  1  0  1  0 	/* TxD5 */
 					1  9  1  0  2  0 	/* TxD6 */
-					1  a  1  0  2  0 	/* TxD7 */
+					1  10 1  0  2  0 	/* TxD7 */
 					0  9  2  0  1  0 	/* RxD0 */
-					0  a  2  0  1  0 	/* RxD1 */
-					0  b  2  0  1  0 	/* RxD2 */
-					0  c  2  0  1  0 	/* RxD3 */
-					0  d  2  0  1  0 	/* RxD4 */
+					0  10 2  0  1  0 	/* RxD1 */
+					0  11 2  0  1  0 	/* RxD2 */
+					0  12 2  0  1  0 	/* RxD3 */
+					0  13 2  0  1  0 	/* RxD4 */
 					1  1  2  0  2  0 	/* RxD5 */
 					1  0  2  0  2  0 	/* RxD6 */
 					1  4  2  0  2  0 	/* RxD7 */
 					0  7  1  0  1  0 	/* TX_EN */
 					0  8  1  0  1  0 	/* TX_ER */
-					0  f  2  0  1  0 	/* RX_DV */
-					0  10 2  0  1  0 	/* RX_ER */
+					0  15 2  0  1  0 	/* RX_DV */
+					0  16 2  0  1  0 	/* RX_ER */
 					0  0  2  0  1  0 	/* RX_CLK */
 					2  9  1  0  3  0 	/* GTX_CLK - CLK10 */
 					2  8  2  0  1  0>;	/* GTX125 - CLK9 */
@@ -173,27 +175,27 @@
 			pio2: ucc_pin at 02 {
 				pio-map = <
 			/* port  pin  dir  open_drain  assignment  has_irq */
-					0  11 1  0  1  0   /* TxD0 */
-					0  12 1  0  1  0   /* TxD1 */
-					0  13 1  0  1  0   /* TxD2 */
-					0  14 1  0  1  0   /* TxD3 */
+					0  17 1  0  1  0   /* TxD0 */
+					0  18 1  0  1  0   /* TxD1 */
+					0  19 1  0  1  0   /* TxD2 */
+					0  20 1  0  1  0   /* TxD3 */
 					1  2  1  0  1  0   /* TxD4 */
 					1  3  1  0  2  0   /* TxD5 */
 					1  5  1  0  3  0   /* TxD6 */
 					1  8  1  0  3  0   /* TxD7 */
-					0  17 2  0  1  0   /* RxD0 */
-					0  18 2  0  1  0   /* RxD1 */
-					0  19 2  0  1  0   /* RxD2 */
-					0  1a 2  0  1  0   /* RxD3 */
-					0  1b 2  0  1  0   /* RxD4 */
-					1  c  2  0  2  0   /* RxD5 */
-					1  d  2  0  3  0   /* RxD6 */
-					1  b  2  0  2  0   /* RxD7 */
-					0  15 1  0  1  0   /* TX_EN */
-					0  16 1  0  1  0   /* TX_ER */
-					0  1d 2  0  1  0   /* RX_DV */
-					0  1e 2  0  1  0   /* RX_ER */
-					0  1f 2  0  1  0   /* RX_CLK */
+					0  23 2  0  1  0   /* RxD0 */
+					0  24 2  0  1  0   /* RxD1 */
+					0  25 2  0  1  0   /* RxD2 */
+					0  26 2  0  1  0   /* RxD3 */
+					0  27 2  0  1  0   /* RxD4 */
+					1  12 2  0  2  0   /* RxD5 */
+					1  13 2  0  3  0   /* RxD6 */
+					1  11 2  0  2  0   /* RxD7 */
+					0  21 1  0  1  0   /* TX_EN */
+					0  22 1  0  1  0   /* TX_ER */
+					0  29 2  0  1  0   /* RX_DV */
+					0  30 2  0  1  0   /* RX_ER */
+					0  31 2  0  1  0   /* RX_CLK */
 					2  2  1  0  2  0   /* GTX_CLK - CLK10 */
 					2  3  2  0  1  0   /* GTX125 - CLK4 */
 					0  1  3  0  2  0   /* MDIO */
@@ -208,45 +210,45 @@
 		#size-cells = <1>;
 		device_type = "qe";
 		model = "QE";
-		ranges = <0 e0100000 00100000>;
-		reg = <e0100000 480>;
+		ranges = <0x0 0xe0100000 0x00100000>;
+		reg = <0xe0100000 0x480>;
 		brg-frequency = <0>;
-		bus-frequency = <179A7B00>;
+		bus-frequency = <396000000>;
 
 		muram at 10000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			device_type = "muram";
-			ranges = <0 00010000 0000c000>;
+			ranges = <0x0 0x00010000 0x0000c000>;
 
 			data-only at 0 {
-				reg = <0 c000>;
+				reg = <0x0 0xc000>;
 			};
 		};
 
 		spi at 4c0 {
 			device_type = "spi";
 			compatible = "fsl_spi";
-			reg = <4c0 40>;
+			reg = <0x4c0 0x40>;
 			interrupts = <2>;
-			interrupt-parent = < &qeic >;
+			interrupt-parent = <&qeic>;
 			mode = "cpu";
 		};
 
 		spi at 500 {
 			device_type = "spi";
 			compatible = "fsl_spi";
-			reg = <500 40>;
+			reg = <0x500 0x40>;
 			interrupts = <1>;
-			interrupt-parent = < &qeic >;
+			interrupt-parent = <&qeic>;
 			mode = "cpu";
 		};
 
 		usb at 6c0 {
 			compatible = "qe_udc";
-			reg = <6c0 40 8B00 100>;
-			interrupts = <b>;
-			interrupt-parent = < &qeic >;
+			reg = <0x6c0 0x40 0x8b00 0x100>;
+			interrupts = <11>;
+			interrupt-parent = <&qeic>;
 			mode = "slave";
 		};
 
@@ -256,15 +258,15 @@
 			model = "UCC";
 			cell-index = <1>;
 			device-id = <1>;
-			reg = <2000 200>;
-			interrupts = <20>;
-			interrupt-parent = < &qeic >;
+			reg = <0x2000 0x200>;
+			interrupts = <32>;
+			interrupt-parent = <&qeic>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock-name = "none";
 			tx-clock-name = "clk9";
-			phy-handle = < &phy0 >;
+			phy-handle = <&phy0>;
 			phy-connection-type = "rgmii-id";
-			pio-handle = < &pio1 >;
+			pio-handle = <&pio1>;
 		};
 
 		enet1: ucc at 3000 {
@@ -273,33 +275,33 @@
 			model = "UCC";
 			cell-index = <2>;
 			device-id = <2>;
-			reg = <3000 200>;
-			interrupts = <21>;
-			interrupt-parent = < &qeic >;
+			reg = <0x3000 0x200>;
+			interrupts = <33>;
+			interrupt-parent = <&qeic>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock-name = "none";
 			tx-clock-name = "clk4";
-			phy-handle = < &phy1 >;
+			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
-			pio-handle = < &pio2 >;
+			pio-handle = <&pio2>;
 		};
 
 		mdio at 2120 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <2120 18>;
+			reg = <0x2120 0x18>;
 			device_type = "mdio";
 			compatible = "ucc_geth_phy";
 
 			phy0: ethernet-phy at 00 {
-				interrupt-parent = < &ipic >;
-				interrupts = <11 8>;
+				interrupt-parent = <&ipic>;
+				interrupts = <17 0x8>;
 				reg = <0>;
 				device_type = "ethernet-phy";
 			};
 			phy1: ethernet-phy at 01 {
-				interrupt-parent = < &ipic >;
-				interrupts = <12 8>;
+				interrupt-parent = <&ipic>;
+				interrupts = <18 0x8>;
 				reg = <1>;
 				device_type = "ethernet-phy";
 			};
@@ -310,70 +312,70 @@
 			device_type = "qeic";
 			#address-cells = <0>;
 			#interrupt-cells = <1>;
-			reg = <80 80>;
+			reg = <0x80 0x80>;
 			big-endian;
-			interrupts = <20 8 21 8>; //high:32 low:33
-			interrupt-parent = < &ipic >;
+			interrupts = <32 0x8 33 0x8>; // high:32 low:33
+			interrupt-parent = <&ipic>;
 		};
 	};
 
 	pci0: pci at e0008500 {
 		cell-index = <1>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 				/* IDSEL 0x11 AD17 */
-				 8800 0 0 1 &ipic 14 8
-				 8800 0 0 2 &ipic 15 8
-				 8800 0 0 3 &ipic 16 8
-				 8800 0 0 4 &ipic 17 8
+				 0x8800 0x0 0x0 0x1 &ipic 20 0x8
+				 0x8800 0x0 0x0 0x2 &ipic 21 0x8
+				 0x8800 0x0 0x0 0x3 &ipic 22 0x8
+				 0x8800 0x0 0x0 0x4 &ipic 23 0x8
 
 				/* IDSEL 0x12 AD18 */
-				 9000 0 0 1 &ipic 16 8
-				 9000 0 0 2 &ipic 17 8
-				 9000 0 0 3 &ipic 14 8
-				 9000 0 0 4 &ipic 15 8
+				 0x9000 0x0 0x0 0x1 &ipic 22 0x8
+				 0x9000 0x0 0x0 0x2 &ipic 23 0x8
+				 0x9000 0x0 0x0 0x3 &ipic 20 0x8
+				 0x9000 0x0 0x0 0x4 &ipic 21 0x8
 
 				/* IDSEL 0x13 AD19 */
-				 9800 0 0 1 &ipic 17 8
-				 9800 0 0 2 &ipic 14 8
-				 9800 0 0 3 &ipic 15 8
-				 9800 0 0 4 &ipic 16 8
+				 0x9800 0x0 0x0 0x1 &ipic 23 0x8
+				 0x9800 0x0 0x0 0x2 &ipic 20 0x8
+				 0x9800 0x0 0x0 0x3 &ipic 21 0x8
+				 0x9800 0x0 0x0 0x4 &ipic 22 0x8
 
 				/* IDSEL 0x15 AD21*/
-				 a800 0 0 1 &ipic 14 8
-				 a800 0 0 2 &ipic 15 8
-				 a800 0 0 3 &ipic 16 8
-				 a800 0 0 4 &ipic 17 8
+				 0xa800 0x0 0x0 0x1 &ipic 20 0x8
+				 0xa800 0x0 0x0 0x2 &ipic 21 0x8
+				 0xa800 0x0 0x0 0x3 &ipic 22 0x8
+				 0xa800 0x0 0x0 0x4 &ipic 23 0x8
 
 				/* IDSEL 0x16 AD22*/
-				 b000 0 0 1 &ipic 17 8
-				 b000 0 0 2 &ipic 14 8
-				 b000 0 0 3 &ipic 15 8
-				 b000 0 0 4 &ipic 16 8
+				 0xb000 0x0 0x0 0x1 &ipic 23 0x8
+				 0xb000 0x0 0x0 0x2 &ipic 20 0x8
+				 0xb000 0x0 0x0 0x3 &ipic 21 0x8
+				 0xb000 0x0 0x0 0x4 &ipic 22 0x8
 
 				/* IDSEL 0x17 AD23*/
-				 b800 0 0 1 &ipic 16 8
-				 b800 0 0 2 &ipic 17 8
-				 b800 0 0 3 &ipic 14 8
-				 b800 0 0 4 &ipic 15 8
+				 0xb800 0x0 0x0 0x1 &ipic 22 0x8
+				 0xb800 0x0 0x0 0x2 &ipic 23 0x8
+				 0xb800 0x0 0x0 0x3 &ipic 20 0x8
+				 0xb800 0x0 0x0 0x4 &ipic 21 0x8
 
 				/* IDSEL 0x18 AD24*/
-				 c000 0 0 1 &ipic 15 8
-				 c000 0 0 2 &ipic 16 8
-				 c000 0 0 3 &ipic 17 8
-				 c000 0 0 4 &ipic 14 8>;
-		interrupt-parent = < &ipic >;
-		interrupts = <42 8>;
+				 0xc000 0x0 0x0 0x1 &ipic 21 0x8
+				 0xc000 0x0 0x0 0x2 &ipic 22 0x8
+				 0xc000 0x0 0x0 0x3 &ipic 23 0x8
+				 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
+		interrupt-parent = <&ipic>;
+		interrupts = <66 0x8>;
 		bus-range = <0 0>;
-		ranges = <02000000 0 a0000000 a0000000 0 10000000
-			  42000000 0 80000000 80000000 0 10000000
-			  01000000 0 00000000 e2000000 0 00100000>;
-		clock-frequency = <3f940aa>;
+		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e0008500 100>;
+		reg = <0xe0008500 0x100>;
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
 	};
-- 
1.5.4.rc4.gcab31




More information about the Linuxppc-dev mailing list