[PATCH UCC TDM 1/3 Updated] Platform changes for UCC TDM driver for MPC8323eRDB. Also includes related QE changes and dts entries.

[Anton Vorontsov]

Hello Poonam,

On Thu, Jan 24, 2008 at 04:00:06PM +0530, Poonam_Aggrwal-b10812 wrote:
> Thanks Stephen for your comments, incorporated them.
> From: Poonam Aggrwal <b10812 at freescale.com>
> 
> This patch makes necessary changes in the QE and UCC framework to support 
> TDM. It also adds support to configure the BRG properly through device 
> tree entries. Includes the device tree changes for UCC TDM driver as well.
> It also includes device tree entries for UCC TDM driver.
> 
> Tested on MPC8323ERDB platform.
> 
> Signed-off-by: Poonam Aggrwal <b10812 at freescale.com>
> Signed-off-by: Ashish Kalra <ashish.kalra at freescale.com>
> Signed-off-by: Kim Phillips <Kim.Phillips at freescale.com>
> Signed-off-by: Michael Barkowski <michael.barkowski at freescale.com>
> ---
>  arch/powerpc/boot/dts/mpc832x_rdb.dts |   58 +++++++
>  arch/powerpc/sysdev/qe_lib/qe.c       |  184 +++++++++++++++++++++--
>  arch/powerpc/sysdev/qe_lib/ucc.c      |  265 +++++++++++++++++++++++++++++++++
>  arch/powerpc/sysdev/qe_lib/ucc_fast.c |   37 +++++
>  include/asm-powerpc/qe.h              |    8 +
>  include/asm-powerpc/ucc.h             |    4 +
>  include/asm-powerpc/ucc_fast.h        |    4 +
>  7 files changed, 548 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
> index 388c8a7..c0e6283 100644
> --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
> +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
> @@ -105,6 +105,17 @@
>  			device_type = "par_io";
>  			num-ports = <7>;
>  
> +			ucc1pio:ucc_pin at 01 {
> +				pio-map = <
> +			/* port  pin  dir  open_drain  assignment  has_irq */
> +					0  e  2  0  1  0	/* CLK11 */
> +					3 16  1  0  2  0	/* BRG9 */
> +					3 1b  1  0  2  0	/* BRG3 */
> +					0  0  3  0  2  0	/* TDMATxD0 */
> +					0  4  3  0  2  0	/* TDMARxD0 */
> +					3 1b  2  0  1  0>;	/* CLK1 */
> +			};
> +

Can we not introduce new pio-maps in the device trees? There
were debates regarding this, and if I understood everything
correctly, pio-maps considered as a bad taste. Better
do bunch of par_io_config_pin() in the board file. Better
yet fixup the firmware (u-boot) to set up dedicated pins
correctly.


Thanks,

-- 
Anton Vorontsov
email: cbou at mail.ru
backup email: ya-cbou at yandex.ru
irc://irc.freenode.net/bd2