[PATCH] Hwmon for Taco
Sean MacLennan
smaclennan at pikatech.com
Tue Jan 8 17:30:00 EST 2008
Benjamin Herrenschmidt wrote:
> That should be in the device-tree...
>
> Cheers,
> Ben.
>
>
Now in the device tree. The name of the file has changed.
Cheers,
Sean
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index a0445be..1f89186 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -57,6 +57,16 @@ config SENSORS_ABITUGURU3
This driver can also be built as a module. If so, the module
will be called abituguru3.
+config SENSORS_AD7414
+ tristate "Analog Devices AD7414"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Analog Devices
+ AD7414 temperature monitoring chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called ad7414.
+
config SENSORS_AD7418
tristate "Analog Devices AD7416, AD7417 and AD7418"
depends on I2C && EXPERIMENTAL
@@ -763,4 +773,13 @@ config HWMON_DEBUG_CHIP
a problem with I2C support and want to see more of what is going
on.
+config PIKA_DTM
+ tristate "PIKA DTM (Dynamic Thermal Management)"
+ depends on HWMON && WARP
+ select SENSORS_AD7414
+ default y
+ help
+ Say Y here if you have a PIKA Warp(tm) Appliance. This driver is
+ required for the DTM to work properly.
+
endif # HWMON
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 55595f6..0c6ee71 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_SENSORS_W83791D) += w83791d.o
obj-$(CONFIG_SENSORS_ABITUGURU) += abituguru.o
obj-$(CONFIG_SENSORS_ABITUGURU3)+= abituguru3.o
+obj-$(CONFIG_SENSORS_AD7414) += ad7414.o
obj-$(CONFIG_SENSORS_AD7418) += ad7418.o
obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o
obj-$(CONFIG_SENSORS_ADM1025) += adm1025.o
@@ -69,7 +70,8 @@ obj-$(CONFIG_SENSORS_VT8231) += vt8231.o
obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o
obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
+obj-$(CONFIG_PIKA_DTM) += pika-dtm.o
+
ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y)
EXTRA_CFLAGS += -DDEBUG
endif
-
--- /dev/null 2005-11-20 22:22:37.000000000 -0500
+++ drivers/hwmon/pika-dtm.c 2008-01-08 01:23:32.000000000 -0500
@@ -0,0 +1,87 @@
+/*
+ * drivers/hwmon/pika-dtm.c
+ *
+ * Overview: On the Warp, the fpga controls the fan. This provides
+ * the temperature to the fpga.
+ *
+ * Copyright (c) 2008 PIKA Technologies
+ * Sean MacLennan <smaclennan at pikatech.com>
+ *
+ * This program is free software; you can redistribute it and/or
modify it
+ * under the terms of the GNU General Public License as
published by the
+ * Free Software Foundation; either version 2 of the License, or
(at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kthread.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+
+
+extern int ad7414_get_temp(void);
+
+static unsigned __iomem *dtm_fpga;
+static struct task_struct *dtm_thread;
+
+
+static int pika_dtm_thread(void *arg)
+{
+ while(!kthread_should_stop()) {
+ int temp = ad7414_get_temp();
+
+ // Write to FPGA
+ out_be32(dtm_fpga, temp);
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ);
+ }
+
+ return 0;
+}
+
+
+int __init pika_dtm_init(void)
+{
+ struct device_node *np;
+ struct resource res;
+
+ if((np = of_find_compatible_node(NULL, NULL, "pika,fpga")) == NULL) {
+ printk(KERN_ERR __FILE__ ": Unable to find FPGA\n");
+ return -ENOENT;
+ }
+
+ /* We do not call of_iomap here since it would map in the entire
+ * fpga space, which is overkill for 4 bytes.
+ */
+ if(of_address_to_resource(np, 0, &res) ||
+ (dtm_fpga = ioremap(res.start + 0x20, 4)) == NULL) {
+ printk(KERN_ERR __FILE__ ": Unable to map FPGA\n");
+ return -ENOENT;
+ }
+
+ dtm_thread = kthread_run(pika_dtm_thread, NULL, "pika-dtm");
+
+ if(IS_ERR(dtm_thread)) {
+ iounmap(dtm_fpga);
+ printk(KERN_ERR __FILE__ ": Unable to start PIKA DTM thread\n");
+ return PTR_ERR(dtm_thread);
+ }
+
+ return 0;
+}
+module_init(pika_dtm_init);
+
+
+void __exit pika_dtm_exit(void)
+{
+ kthread_stop(dtm_thread);
+ iounmap(dtm_fpga);
+}
+module_exit(pika_dtm_exit);
+
+
+MODULE_DESCRIPTION("PIKA DTM driver");
+MODULE_AUTHOR("Sean MacLennan");
+MODULE_LICENSE("GPL");
--- /dev/null 2005-11-20 22:22:37.000000000 -0500
+++ drivers/hwmon/ad7414.c 2008-01-05 20:36:06.000000000 -0500
@@ -0,0 +1,296 @@
+/*
+ * An hwmon driver for the Analog Devices AD7414
+ *
+ * Copyright 2006 Stefan Roese <sr at denx.de>, DENX Software Engineering
+ *
+ * Based on ad7418.c
+ * Copyright 2006 Tower Technologies, Alessandro Zummo
<a.zummo at towertech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+
+
+#define DRV_VERSION "0.2"
+
+/* straight from the datasheet */
+#define AD7414_TEMP_MIN (-55000)
+#define AD7414_TEMP_MAX 125000
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x48, 0x4a, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD;
+
+/* AD7414 registers */
+#define AD7414_REG_TEMP 0x00
+#define AD7414_REG_CONF 0x01
+#define AD7414_REG_T_HIGH 0x02
+#define AD7414_REG_T_LOW 0x03
+
+struct ad7414_data {
+ struct i2c_client client;
+ struct device *dev;
+ struct mutex lock;
+ char valid; /* !=0 if following fields are valid */
+ unsigned long last_updated; /* In jiffies */
+ u16 temp_input; /* Register values */
+ u8 temp_max;
+ u8 temp_min;
+ u8 temp_alert;
+ u8 temp_max_flag;
+ u8 temp_min_flag;
+};
+
+static int ad7414_attach_adapter(struct i2c_adapter *adapter);
+static int ad7414_detect(struct i2c_adapter *adapter, int address, int
kind);
+static int ad7414_detach_client(struct i2c_client *client);
+
+static struct i2c_driver ad7414_driver = {
+ .driver = {
+ .name = "ad7414",
+ },
+ .attach_adapter = ad7414_attach_adapter,
+ .detach_client = ad7414_detach_client,
+};
+
+/*
+ * TEMP: 0.001C/bit (-55C to +125C)
+ * REG: (0.5C/bit, two's complement) << 7
+ */
+static inline int AD7414_TEMP_FROM_REG(u16 reg)
+{
+ /* use integer division instead of equivalent right shift to
+ * guarantee arithmetic shift and preserve the sign
+ */
+ return ((s16)reg / 128) * 500;
+}
+
+/* All registers are word-sized, except for the configuration registers.
+ * AD7414 uses a high-byte first convention, which is exactly opposite to
+ * the usual practice.
+ */
+static int ad7414_read(struct i2c_client *client, u8 reg)
+{
+ if (reg == AD7414_REG_TEMP)
+ return swab16(i2c_smbus_read_word_data(client, reg));
+ else
+ return i2c_smbus_read_byte_data(client, reg);
+}
+
+static int ad7414_write(struct i2c_client *client, u8 reg, u16 value)
+{
+ return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+/* PIKA Taco - we need to access the temperature in kernel mode. As a
+ * hack we store the device here. This works because we only have one
+ * ad7414 chip.
+ */
+static struct device *ad7414_dev;
+
+static void ad7414_init_client(struct i2c_client *client)
+{
+ /* TODO: anything to do here??? */
+ ad7414_dev = &client->dev;
+}
+
+static struct ad7414_data *ad7414_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ad7414_data *data = i2c_get_clientdata(client);
+
+ mutex_lock(&data->lock);
+
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
+ dev_dbg(&client->dev, "starting ad7414 update\n");
+
+ data->temp_input = ad7414_read(client, AD7414_REG_TEMP);
+ data->temp_alert = (data->temp_input >> 5) & 0x01;
+ data->temp_max_flag = (data->temp_input >> 4) & 0x01;
+ data->temp_min_flag = (data->temp_input >> 3) & 0x01;
+ data->temp_max = ad7414_read(client, AD7414_REG_T_HIGH);
+ data->temp_min = ad7414_read(client, AD7414_REG_T_LOW);
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ mutex_unlock(&data->lock);
+
+ return data;
+}
+
+int ad7414_get_temp(void)
+{
+ if(ad7414_dev) {
+ struct ad7414_data *data = ad7414_update_device(ad7414_dev);
+ return data->temp_input;
+ } else
+ return 0x1f4; // +125
+}
+EXPORT_SYMBOL(ad7414_get_temp);
+
+#define show(value) \
+static ssize_t show_##value(struct device *dev, struct device_attribute
*attr, char *buf) \
+{ \
+ struct ad7414_data *data = ad7414_update_device(dev); \
+ return sprintf(buf, "%d\n", AD7414_TEMP_FROM_REG(data->value)); \
+}
+show(temp_input);
+
+#define show_8(value) \
+static ssize_t show_##value(struct device *dev, struct device_attribute
*attr, char *buf) \
+{ \
+ struct ad7414_data *data = ad7414_update_device(dev); \
+ return sprintf(buf, "%d\n", data->value); \
+}
+show_8(temp_max);
+show_8(temp_min);
+show_8(temp_alert);
+show_8(temp_max_flag);
+show_8(temp_min_flag);
+
+#define set(value, reg) \
+static ssize_t set_##value(struct device *dev, struct device_attribute
*attr, const char *buf, size_t count) \
+{ \
+ struct i2c_client *client = to_i2c_client(dev); \
+ struct ad7414_data *data = i2c_get_clientdata(client); \
+ int temp = simple_strtoul(buf, NULL, 10); \
+ \
+ mutex_lock(&data->lock); \
+ data->value = temp; \
+ ad7414_write(client, reg, data->value); \
+ mutex_unlock(&data->lock); \
+ return count; \
+}
+set(temp_max, AD7414_REG_T_HIGH);
+set(temp_min, AD7414_REG_T_LOW);
+
+static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max,
set_temp_max);
+static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_min,
set_temp_min);
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL);
+static DEVICE_ATTR(temp1_alert, S_IRUGO, show_temp_alert, NULL);
+static DEVICE_ATTR(temp1_max_flag, S_IRUGO, show_temp_max_flag, NULL);
+static DEVICE_ATTR(temp1_min_flag, S_IRUGO, show_temp_min_flag, NULL);
+
+static int ad7414_attach_adapter(struct i2c_adapter *adapter)
+{
+ if (!(adapter->class & I2C_CLASS_HWMON))
+ return 0;
+ return i2c_probe(adapter, &addr_data, ad7414_detect);
+}
+
+static struct attribute *ad7414_attributes[] = {
+ &dev_attr_temp1_input.attr,
+ &dev_attr_temp1_max.attr,
+ &dev_attr_temp1_min.attr,
+ &dev_attr_temp1_alert.attr,
+ &dev_attr_temp1_max_flag.attr,
+ &dev_attr_temp1_min_flag.attr,
+ NULL
+};
+
+static const struct attribute_group ad7414_group = {
+ .attrs = ad7414_attributes,
+};
+
+static int ad7414_detect(struct i2c_adapter *adapter, int address, int
kind)
+{
+ struct i2c_client *client;
+ struct ad7414_data *data;
+ int err = 0;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA))
+ goto exit;
+
+ if (!(data = kzalloc(sizeof(struct ad7414_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ client = &data->client;
+ client->addr = address;
+ client->adapter = adapter;
+ client->driver = &ad7414_driver;
+ client->flags = 0;
+
+ i2c_set_clientdata(client, data);
+
+ mutex_init(&data->lock);
+
+ /* TODO: not testing for AD7414 done yet... */
+
+ strlcpy(client->name, ad7414_driver.driver.name, I2C_NAME_SIZE);
+
+ if ((err = i2c_attach_client(client)))
+ goto exit_free;
+
+ dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
+
+ /* Initialize the AD7414 chip */
+ ad7414_init_client(client);
+
+ /* Register sysfs hooks */
+ if ((err = sysfs_create_group(&client->dev.kobj, &ad7414_group)))
+ goto exit_detach;
+
+ data->dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->dev)) {
+ err = PTR_ERR(data->dev);
+ goto exit_remove;
+ }
+
+ return 0;
+
+exit_remove:
+ sysfs_remove_group(&client->dev.kobj, &ad7414_group);
+exit_detach:
+ i2c_detach_client(client);
+exit_free:
+ kfree(data);
+exit:
+ return err;
+}
+
+static int ad7414_detach_client(struct i2c_client *client)
+{
+ struct ad7414_data *data = i2c_get_clientdata(client);
+ ad7414_dev = NULL;
+ hwmon_device_unregister(data->dev);
+ sysfs_remove_group(&client->dev.kobj, &ad7414_group);
+ i2c_detach_client(client);
+ kfree(data);
+ return 0;
+}
+
+static int __init ad7414_init(void)
+{
+ return i2c_add_driver(&ad7414_driver);
+}
+
+static void __exit ad7414_exit(void)
+{
+ i2c_del_driver(&ad7414_driver);
+}
+
+MODULE_AUTHOR("Stefan Roese <sr at denx.de>");
+MODULE_DESCRIPTION("AD7414 driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+module_init(ad7414_init);
+module_exit(ad7414_exit);
More information about the Linuxppc-dev
mailing list