August 2007 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed Aug 1 00:11:57 EST 2007
Ending: Fri Aug 31 18:59:47 EST 2007
Messages: 450

• Reboot Command Makes kernel to hang (MPC8560)   Kumar Gala
• Reboot Command Makes kernel to hang (MPC8560)   Ansari
• Reboot Command Makes kernel to hang (MPC8560)   Kumar Gala
• Reboot Command Makes kernel to hang (MPC8560)   Clemens Koller
• I2C interrupts on 8541   Kumar Gala
• Embedded linux FTP Server   khollan
  • Embedded linux FTP Server   Clemens Koller
    • Embedded linux FTP Server   khollan
• [PATCH] Add support for Wind River SBC8641D board   Joe Hamman
  • [PATCH] Add support for Wind River SBC8641D board   Kumar Gala
  • [PATCH] Add support for Wind River SBC8641D board   Joe Hamman
  • [PATCH] Add support for Wind River SBC8641D board   Joe Hamman
  • [PATCH] Add support for Wind River SBC8641D board   Kumar Gala
• [PATCH] [POWERPC] Typo fixes interrrupt -> interrupt   Gabriel C
  • [PATCH] [POWERPC] Typo fixes interrrupt -> interrupt   Stephen Rothwell
    • [PATCH] [POWERPC] Typo fixes interrrupt -> interrupt   Gabriel C
    • [PATCH] [POWERPC] Typo fixes interrrupt -> interrupt ( try 2 )   Gabriel C
• [PATCH] lite5200b: flash definition in dts   Domen Puncer
  • [PATCH] lite5200b: flash definition in dts   Grant Likely
    • [PATCH] lite5200b: flash definition in dts   Domen Puncer
      • [PATCH] lite5200b: flash definition in dts   Grant Likely
      • [PATCH] lite5200b: flash definition in dts   Scott Wood
      • [PATCH v2] lite5200b: flash definition in dts   Domen Puncer
• GPIO interrupts on mpc8313e   Yoni Levin
  • GPIO interrupts on mpc8313e   Florian A. Voegel
    • GPIO interrupts on mpc8313e   Scott Wood
      • GPIO interrupts on mpc8313e   Domen Puncer
      • GPIO interrupts on mpc8313e   Yoni Levin
      • GPIO interrupts on mpc8313e   Scott Wood
      • GPIO interrupts on mpc8313e   Yoni Levin
      • GPIO interrupts on mpc8313e   Scott Wood
• a question about mpc8xx linux   Barisa kisku
• TQM5200 problems (kernel 2.4)   Kimmo Surakka
  • [PATCH] Add support for IDS8247 board   Sergej Stepanov
    • [PATCH] Add support for IDS8247 board   Arnd Bergmann
• suspend/resume (Xilinx V4)   John Williams
  • suspend/resume (Xilinx V4)   Grant Likely
• [GIT PATCH] ucc_geth fixes for 2.6.22-rc1   Li Yang
  • [GIT PATCH] ucc_geth fixes for 2.6.22-rc1   Jeff Garzik
• reg : SM722 Linux driver   mahendra varman
  • reg : SM722 Linux driver   Clemens Koller
• 22.1-rt8: BUG: scheduling while atomic: stress/0x00000002/739, CPU#0   Pradyumna Sampath
  • How can I boot powerpc kernel?   ssaravanan at arasor.in
    • How can I boot powerpc kernel?   Sergei Shtylyov
• BusyBox passwd requires root privileges   khollan
  • BusyBox passwd requires root privileges   Scott Wood
    • BusyBox passwd requires root privileges   khollan
      • BusyBox passwd requires root privileges   Scott Wood
      • BusyBox passwd requires root privileges   khollan
• ML403 / ALSA driver for AC97 Controller   Joachim Förster
  • ML403 / ALSA driver for AC97 Controller   Grant Likely
    • ML403 / ALSA driver for AC97 Controller   Grant Likely
      • ML403 / ALSA driver for AC97 Controller   Timur Tabi
• my cpu is MPC860, kernel version is 2.6.20.14, the kernel start info in the mail. why does the kernel panic?   poorbeyond
  • my cpu is MPC860, kernel version is 2.6.20.14, the kernel start info in the mail. why does the kernel panic?   Scott Wood
    • my cpu is MPC860, kernel version is 2.6.20.14, the kernel start info in the mail. why does the kernel panic?   Dan Malek
    • my cpu is MPC860, kernel version is 2.6.20.14, the kernel start info in the mail. why does the kernel panic?   Scott Wood
    • my cpu is MPC860, kernel version is 2.6.20.14, the kernel startinfo in the mail. why does the kernel panic?   poorbeyond
• Uncompressing Kernel Image ... Error: inflate() returned -3 GUNZIP ERROR - must RESET board to recover   Nethra
  • My kernel hangs after transferring control to linux   ramesh at arasor.in
    • My kernel hangs after transferring control to linux   Pedro Luis D. L.
    • My kernel hangs after transferring control to linux   Stevan Ignjatovic
  • [PATCH] Generic configuration selector for Xilinx devices   Wolfgang Reissnegger
    • [PATCH] Generic configuration selector for Xilinx devices   Stephen Neuendorffer
    • [PATCH] Generic configuration selector for Xilinx devices   Grant Likely
  • [PATCH] Consolidate XILINX_VIRTEX board support   Wolfgang Reissnegger
    • [PATCH] Consolidate XILINX_VIRTEX board support   Arnd Bergmann
      • [PATCH] Consolidate XILINX_VIRTEX board support   Stephen Neuendorffer
      • [PATCH] Consolidate XILINX_VIRTEX board support   Grant Likely
      • [PATCH] Consolidate XILINX_VIRTEX board support   Grant Likely
      • Device Tree tool [was RE: [PATCH] Consolidate XILINX_VIRTEX board support]   Koss, Mike (Mission Systems)
      • Device Tree tool [was RE: [PATCH] Consolidate XILINX_VIRTEX board support]   Grant Likely
      • Device Tree tool [was RE: [PATCH] Consolidate XILINX_VIRTEX boardsupport]   Stephen Neuendorffer
      • Device Tree tool [was RE: [PATCH] Consolidate XILINX_VIRTEXboardsupport]   Stephen Neuendorffer
      • RE: Device Tree tool [was RE: [PATCH] Consolidate XILINX_VIRTEXboardsupport]   Michal Simek
      • Device Tree tool [was RE: [PATCH] Consolidate XILINX_VIRTEXboardsupport]   Stephen Neuendorffer
      • Device Tree tool [was RE: [PATCH] Consolidate XILINX_VIRTEXboardsupport]   Grant Likely
      • [PATCH] Consolidate XILINX_VIRTEX board support   Kumar Gala
      • [PATCH] Consolidate XILINX_VIRTEX board support   Grant Likely
    • [PATCH] Consolidate XILINX_VIRTEX board support   Peter Korsgaard
    • [PATCH] Consolidate XILINX_VIRTEX board support   Peter Korsgaard
      • [PATCH] Consolidate XILINX_VIRTEX board support   Grant Likely
      • [PATCH] Consolidate XILINX_VIRTEX board support   Peter Korsgaard
      • [PATCH] Consolidate XILINX_VIRTEX board support   Grant Likely
      • [PATCH] Consolidate XILINX_VIRTEX board support   David H. Lynch Jr.
      • [PATCH] Consolidate XILINX_VIRTEX board support   Josh Boyer
      • [PATCH] Consolidate XILINX_VIRTEX board support   David H. Lynch Jr.
    • [PATCH] Consolidate XILINX_VIRTEX board support   Grant Likely
      • [PATCH] Consolidate XILINX_VIRTEX board support   Grant Likely
      • Best Linux tree for Xilinx support.   Leonid
      • Best Linux tree for Xilinx support.   Wolfgang Reissnegger
      • Best Linux tree for Xilinx support.   Leonid
      • Best Linux tree for Xilinx support.   Grant Likely
      • Best Linux tree for Xilinx support.   Wolfgang Reissnegger
      • Best Linux tree for Xilinx support.   Leonid
      • Best Linux tree for Xilinx support.   David H. Lynch Jr.
• Linux PPC 8555--TSec initialisation   Shashikumar
  • Linux PPC 8555--TSec initialisation   Kumar Gala
• Sequoia PPC440EPx GPIO Inquiry   Jeyner Gil Caga
• signals handling in the kernel   Mirek23
  • signals handling in the kernel   David Hawkins
    • signals handling in the kernel   David Hawkins
      • signals handling in the kernel   Mirek23
      • signals handling in the kernel   David Hawkins
      • signals handling in the kernel   Mirek23
      • signals handling in the kernel   David Hawkins
      • signals handling in the kernel   Mirek23
      • signals handling in the kernel   Detlev Zundel
      • signals handling in the kernel   Mirek23
      • signals handling in the kernel   David Hawkins
      • signals handling in the kernel   Mirek23
      • signals handling in the kernel   David Hawkins
• Were to start? With MPC8272 and embedded Linux.   Channy Tremblay
  • Were to start? With MPC8272 and embedded Linux.   Detlev Zundel
    • Linux with data2mem   Glenn.G.Hart at us.westinghouse.com
      • Linux with data2mem   jozsef imrek
• Fedora 7 on a non FPU system   Michael Brian Willis
  • Fedora 7 on a non FPU system   Roland Dreier
  • Fedora 7 on a non FPU system   Josh Boyer
  • Fedora 7 on a non FPU system   Clemens Koller
    • Fedora 7 on a non FPU system   Michael Brian Willis
• Telnet on ML410   khollan
  • Telnet on ML410   khollan
  • TEMAC support of Uboot on ML403   Ming Liu
• no output to serial console from /init process on ml405   Anton Kowalski
  • no output to serial console from /init process on ml405   Wolfgang Reissnegger
    • no output to serial console from /init process on ml405   Anton Kowalski
    • no output to serial console from /init process on ml405   Wolfgang Reissnegger
    • no output to serial console from /init process on ml405   Anton Kowalski
  • no output to serial console from /init process on ml405   Benedict, Michael
    • no output to serial console from /init process on ml405   Anton Kowalski
  • TEMAC support of Uboot on ML403   Ming Liu
• how the bytes ordered in mpc8313   Yoni Levin
  • how the bytes ordered in mpc8313   Scott Wood
  • how the bytes ordered in mpc8313   Scott Wood
• [PATCH] i2c-mpc: don't disable I2C module on stop condition.   Jean Delvare
  • [PATCH] i2c-mpc: don't disable I2C module on stop condition.   Guennadi Liakhovetski
• Cypress C67X00 driver question   Robertson, Joseph M.
  • Cypress C67X00 driver question   Peter Korsgaard
    • FW: Cypress C67X00 driver question   Robertson, Joseph M.
• [PATCH 1/2] Xlinx ML403 AC97 Controller Reference device driver   Joachim Förster
  • [alsa-devel] [PATCH 1/2] Xlinx ML403 AC97 Controller Reference device driver   Takashi Iwai
    • [alsa-devel] [PATCH 1/2] Xlinx ML403 AC97 Controller Reference device driver   Joachim Förster
      • [alsa-devel] [PATCH 1/2] Xlinx ML403 AC97 Controller Reference device driver   Takashi Iwai
    • [alsa-devel] [PATCH 1/2] Xlinx ML403 AC97 Controller Reference device driver   Joachim Förster
      • [alsa-devel] [PATCH 1/2] Xlinx ML403 AC97 Controller Reference device driver   Takashi Iwai
    • [PATCHv2 1/2] Xilinx ML403 AC97 Controller Reference device driver   Joachim Förster
      • [PATCH] [ML403-AC97CR] Fix (device/driver) name registered with platform bus   Joachim Foerster
    • [PATCHv2 2/2] [VIRTEX] Register AC97 Controller Reference with the platform bus   Joachim Förster
  • [PATCH 1/2] Xlinx ML403 AC97 Controller Reference device driver   Grant Likely
    • [PATCH 1/2] Xlinx ML403 AC97 Controller Reference device driver   Joachim Förster
      • [PATCH 1/2] Xlinx ML403 AC97 Controller Reference device driver   Grant Likely
      • [PATCH 1/2] Xlinx ML403 AC97 Controller Reference device driver   Takashi Iwai
    • [PATCH 1/2] Xlinx ML403 AC97 Controller Reference device driver   Stephen Neuendorffer
• [PATCH 2/2] [VIRTEX] Register AC97 Controller Reference with the platform bus   Joachim Förster
  • [PATCH 2/2] [VIRTEX] Register AC97 Controller Reference with the platform bus   Grant Likely
• BUG-REPORT Re: ml403 ac97 driver   Joachim Förster
• BusyBox Mount   khollan
  • BusyBox Mount   Wolfgang Reissnegger
• [RFC PATCH v0.1] net driver: mpc52xx fec   Domen Puncer
  • [RFC PATCH v0.1] net driver: mpc52xx fec   Arnaldo Carvalho de Melo
    • [RFC PATCH v0.1] net driver: mpc52xx fec   Domen Puncer
  • [RFC PATCH v0.1] net driver: mpc52xx fec   Domen Puncer
    • [RFC PATCH v0.1] net driver: mpc52xx fec   Matt Sealey
    • [RFC PATCH v0.1] net driver: mpc52xx fec   Domen Puncer
    • [RFC PATCH v0.1] net driver: mpc52xx fec   Domen Puncer
    • [RFC PATCH v0.1] net driver: mpc52xx fec   Matt Sealey
    • [RFC PATCH v0.1] net driver: mpc52xx fec   Domen Puncer
    • Unwinding stack frame   Bizhan Gholikhamseh (bgholikh)
• How to increase the kernel stack size   suresh suresh
• some questions about XUP and the generation of ace file   windstorm
  • some questions about XUP and the generation of ace file   Grant Likely
    • some questions about XUP and the generation of ace file   windstorm
      • some questions about XUP and the generation of ace file   Grant Likely
• i couldn't get display in Console?   Sergei Shtylyov
• 2.6 system stuck with one line change in platform_init()   mike zheng
  • 2.6 system stuck with one line change in platform_init()   Michael.Kang
• Is it possible to move Kernel Virtual Space to 0xE0000000   Subbu Linux
  • Is it possible to move Kernel Virtual Space to 0xE0000000   John Reiser
• my kernel start info prompt: "Badness at arch/ppc/kernel/dma-mapping.c:345", inside the mail is the detail   poorbeyond
  • no words output in console on 852t board with kernel 2.6.15   徐 运
  • basic and stupid question on wait_event and wake_up   Ming Liu
    • basic and stupid question on wait_event and wake_up   Domen Puncer
      • basic and stupid question on wait_event and wake_up   Ming Liu
      • basic and stupid question on wait_event and wake_up   Domen Puncer
      • basic and stupid question on wait_event and wake_up   Ming Liu
      • basic and stupid question on wait_event and wake_up   Laurent Pinchart
      • basic and stupid question on wait_event and wake_up   Domen Puncer
      • basic and stupid question on wait_event and wake_up   Ming Liu
• [PATCH] [193/2many] MAINTAINERS - FREESCALE SOC FS_ENET DRIVER   joe at perches.com
• [PATCH] [194/2many] MAINTAINERS - FREESCALE HIGHSPEED USB DEVICE DRIVER   joe at perches.com
• [PATCH] [195/2many] MAINTAINERS - FREESCALE QUICC ENGINE UCC ETHERNET DRIVER   joe at perches.com
• [PATCH] [291/2many] MAINTAINERS - LINUX FOR POWERPC EMBEDDED MPC52XX   joe at perches.com
• [PATCH] [292/2many] MAINTAINERS - LINUX FOR POWERPC EMBEDDED PPC4XX   joe at perches.com
  • [PATCH] [292/2many] MAINTAINERS - LINUX FOR POWERPC EMBEDDED PPC4XX   Josh Boyer
    • [PATCH] [292/2many] MAINTAINERS - LINUX FOR POWERPC EMBEDDED PPC4XX   Joe Perches
      • [PATCH] [292/2many] MAINTAINERS - LINUX FOR POWERPC EMBEDDED PPC4XX   Josh Boyer
• [PATCH] [293/2many] MAINTAINERS - LINUX FOR POWERPC BOOT CODE   joe at perches.com
• [PATCH] [294/2many] MAINTAINERS - LINUX FOR POWERPC EMBEDDED PPC8XX   joe at perches.com
• [PATCH] [295/2many] MAINTAINERS - LINUX FOR POWERPC EMBEDDED PPC83XX AND PPC85XX   joe at perches.com
• [PATCH] [381/2many] MAINTAINERS - POWERPC 4xx EMAC DRIVER   joe at perches.com
• Power Managment (mpc83xx)   Yoni Levin
  • Power Managment (mpc83xx)   Scott Wood
• MPC755 L2 Cache data parity error   Chuck Brown
• PCI BAR mapping problem   Johan Borkhuis
• MPC5200 and Bestcomm   Jon Smirl
  • MPC5200 and Bestcomm   Grant Likely
    • MPC5200 and Bestcomm   Jon Smirl
      • MPC5200 and Bestcomm   Jon Smirl
      • MPC5200 and Bestcomm   Matt Sealey
      • MPC5200 and Bestcomm   Jon Smirl
    • MPC5200 and Bestcomm   Bartlomiej Sieka
• [PATCH] tsec: Allow Ten Bit Interface to be configurable   Joe Hamman
  • Xilinx EMAC driver for Linux in polling mode.   Leonid
• [PATCH] [UPDATED] tsec: Allow Ten Bit Interface to be configurable   Joe Hamman
  • [PATCH] [UPDATED] tsec: Allow Ten Bit Interface to be configurable   Kumar Gala
  • [PATCH] [UPDATED] tsec: Allow Ten Bit Interface to be configurable   Joe Hamman
  • [PATCH] [UPDATED] tsec: Allow Ten Bit Interface to be configurable   Joe Hamman
  • [PATCH] [UPDATED] tsec: Allow Ten Bit Interface to be configurable   Andy Fleming
  • [PATCH] [UPDATED] tsec: Allow Ten Bit Interface to be configurable   Scott Wood
  • [PATCH] [UPDATED] tsec: Allow Ten Bit Interface to be configurable   Joe Hamman
  • [PATCH] [UPDATED] tsec: Allow Ten Bit Interface to be configurable   Scott Wood
  • [PATCH] [UPDATED] tsec: Allow Ten Bit Interface to be configurable   Andy Fleming
  • [PATCH] [UPDATED] tsec: Allow Ten Bit Interface to be configurable   Joe Hamman
  • [PATCH] [UPDATED] tsec: Allow Ten Bit Interface to be configurable   Andy Fleming
  • [PATCH] [UPDATED] tsec: Allow Ten Bit Interface to be configurable   Joe Hamman
• Bestcomm Firmware update   Frank Bennett
• MPC755   Chuck Brown
• System crash on boot_e500.S on 2.4Kernel   mike zheng
  • System crash on boot_e500.S on 2.4Kernel   Andy Fleming
  • System crash on boot_e500.S on 2.4Kernel   mike zheng
  • System crash on boot_e500.S on 2.4Kernel   Becky Bruce
  • System crash on boot_e500.S on 2.4Kernel   mike zheng
  • System crash on boot_e500.S on 2.4Kernel   Andy Fleming
  • System crash on boot_e500.S on 2.4Kernel   mike zheng
  • System crash on boot_e500.S on 2.4Kernel   Andy Fleming
  • System crash on boot_e500.S on 2.4Kernel   mike zheng
• Problem getting a webserver running   Johan Borkhuis
• My Kernel hangs after images verification and no boot msgs on Console?   dnl
  • My Kernel hangs after images verification and no boot msgs on Console?   Haiying Wang
• external IRQ's   robert lazarski
  • external IRQ's   Scott Wood
    • external IRQ's   robert lazarski
      • external IRQ's   Scott Wood
      • external IRQ's   robert lazarski
      • external IRQ's   Scott Wood
  • BestComm Task enable   Pedro Luis D. L.
• some question about linux kernel in embed system   李明
  • some question about linux kernel in embed system   Florian A. Voegel
  • No subject  
  • No subject  
  • some question about linux kernel in embed system   Pedro Luis D. L.
• How to set non standurd baud rate on MPC5200 UART.   Syamala Venugopal Reddy
  • system hang in early_init   ravi.rao at rflelect.com
• Booting new MPC5200B board   Jon Smirl
  • Booting new MPC5200B board   Jon Smirl
• some error about nfs   李明
• Driver for device behind a PCI-VME bridge   Konstantin Boyanov
  • Driver for device behind a PCI-VME bridge   Johan Borkhuis
    • Driver for device behind a PCI-VME bridge   Konstantin Boyanov
• problem in configuring PC13 for Ext interrupt   Misbah khan
• Xilinx Virtex4 FX PPC   Robert Woodworth
  • Xilinx Virtex4 FX PPC   Josh Boyer
    • Xilinx Virtex4 FX PPC   Robert Woodworth
      • Xilinx Virtex4 FX PPC   Grant Likely
      • Xilinx Virtex4 FX PPC   Stephen Neuendorffer
      • Xilinx Virtex4 FX PPC   Clemens Koller
  • Xilinx Virtex4 FX PPC   Grant Likely
  • Xilinx Virtex4 FX PPC   Stelios Koroneos
    • Xilinx Virtex4 FX PPC   Josh Boyer
• Cypress c67x00 patches   Grant Likely
• lim_nfs problem   lim.taicom
• Driver for device behind a PCI-VME bridge   Konstantin Boyanov
  • Driver for device behind a PCI-VME bridge   Johan Borkhuis
    • Driver for device behind a PCI-VME bridge   Konstantin Boyanov
• No subject   ramesh mrm
  • OF /chosen/initrd,* variables - patch, official?   Matt Sealey
    • OF /chosen/initrd,* variables - patch, official?   Matt Sealey
    • OF /chosen/initrd,* variables - patch, official?   David Gibson
    • Linux 2.6.23.rc3 boot issues on XUPV2P   Computer - Service
    • Linux 2.6.23.rc3 boot issues on XUPV2P   Grant Likely
    • OF /chosen/initrd,* variables - patch, official?   Matt Sealey
    • OF /chosen/initrd,* variables - patch, official?   David Gibson
    • OF /chosen/initrd,* variables - patch, official?   Matt Sealey
    • OF /chosen/initrd,* variables - patch, official?   David Gibson
    • OF /chosen/initrd,* variables - patch, official?   Matt Sealey
    • OF /chosen/initrd,* variables - patch, official?   David Gibson
• C67x00 Driver IRQ Problem.   Robertson, Joseph M.
  • C67x00 Driver IRQ Problem.   Peter Korsgaard
  • [PATCH 1/3] Add generic configuration option to enable all xilinx drivers.   Wolfgang Reissnegger
  • [PATCH] Consolidate XILINX_VIRTEX board support.   Wolfgang Reissnegger
  • [PATCH 3/3] Add support for xupv2p and ml410 boards.   Wolfgang Reissnegger
  • [PATCH 1/3] Add generic configuration option to enable all xilinx drivers.   wolfgang.reissnegger at xilinx.com
    • [PATCH 1/3] Add generic configuration option to enable all xilinx drivers.   Grant Likely
      • [PATCH 1/3] Add generic configuration option to enable all xilinx drivers.   Stephen Neuendorffer
  • [PATCH 2/3] Consolidate XILINX_VIRTEX board support.   wolfgang.reissnegger at xilinx.com
    • [PATCH 2/3] Consolidate XILINX_VIRTEX board support.   Robert Woodworth
  • [PATCH 3/3] Add support for xupv2p and ml410 boards.   wolfgang.reissnegger at xilinx.com
    • [PATCH 3/3] Add support for xupv2p and ml410 boards.   Josh Boyer
    • [PATCH 3/3] Add support for xupv2p and ml410 boards.   Robert Woodworth
      • [PATCH 3/3] Add support for xupv2p and ml410 boards.   Grant Likely
      • [PATCH 3/3] Add support for xupv2p and ml410 boards.   Esben Nielsen
• Why dose system hangs after "Now booting the kernel" ?   angelalinyao at 163.com
• Only one phy can be accessed through ioctls to a socket (patch available)   DI BACCO ANTONIO - technolabs
  • Only one phy can be accessed through ioctls to a socket (patch available)   Andy Fleming
  • Only one phy can be accessed through ioctls to a socket (patch available)   DI BACCO ANTONIO - technolabs
• Badness in local_bh_enable at kernel/softirq.c:137 (linux_denx_2.6.19.2)   DI BACCO ANTONIO - technolabs
  • Badness in local_bh_enable at kernel/softirq.c:137 (linux_denx_2.6.19.2)   Scott Wood
    • Kerenel crashes every other Boot..   ravi.rao at rflelect.com
      • Kerenel crashes every other Boot..   Wolfgang Reissnegger
      • Kerenel crashes every other Boot..   ravi.rao at rflelect.com
  • [Fwd: Re: [PATCH 3/3] Add support for xupv2p and ml410 boards.]   Wolfgang Reissnegger
  • Kerenel crashes every other Boot..   Wolfgang Reissnegger
    • Kerenel crashes every other Boot..   ravi.rao at rflelect.com
    • Need the bdi cfg file for taihu PPCEP405 Eval board   ravi.rao at rflelect.com
    • Need the bdi cfg file for taihu PPCEP405 Eval board   Stefan Roese
• gdbserver and c++   khollan
  • gdbserver and c++   khollan
  • Kerenel crashes every other Boot..   Wolfgang Reissnegger
    • Getting lite5200 debian X11 up and running with CoralP   Mark Gibson
• STK5200 pci_enable_device problem   Mustafa Cayır
  • STK5200 pci_enable_device problem   Oliver Rutsch
    • STK5200 pci_enable_device problem   Wolfgang Denk
      • STK5200 pci_enable_device problem   Oliver Rutsch
      • STK5200 pci_enable_device problem   Wolfgang Denk
    • STK5200 pci_enable_device problem   Mustafa Cayir
      • STK5200 pci_enable_device problem   Wolfgang Denk
      • STK5200 pci_enable_device problem   Mustafa Cayir
      • STK5200 pci_enable_device problem   Oliver Rutsch
      • STK5200 pci_enable_device problem   Wolfgang Denk
      • STK5200 pci_enable_device problem   Oliver Rutsch
      • STK5200 pci_enable_device problem   Wolfgang Denk
      • STK5200 pci_enable_device problem   Oliver Rutsch
      • STK5200 pci_enable_device problem   Mustafa Cayir
  • STK5200 pci_enable_device problem   Wolfgang Denk
• Driver for device behind a PCI-VME bridge   Konstantin Boyanov
  • Driver for device behind a PCI-VME bridge   Johan Borkhuis
• Flash paritioning and JFFS2   Mirek23
  • Flash paritioning and JFFS2   Michael Brian Willis
    • Any success with EP8248 and u-boot?   daniel.garoz at dimetronic.com
  • powersave-nap   Benedict, Michael
• c67x00 driver again.   Robertson, Joseph M.
• Problems on porting linux 2.6 to xilinx ML410   woyuzhilei
  • Problems on porting linux 2.6 to xilinx ML410   Grant Likely
    • Problems on porting linux 2.6 to xilinx ML410   woyuzhilei
      • how to get your linux-2.6-virtex tree?   Ming Liu
      • how to get your linux-2.6-virtex tree?   Grant Likely
      • how to get your linux-2.6-virtex tree?   Jon Smirl
      • how to get your linux-2.6-virtex tree?   Ming Liu
      • how to get your linux-2.6-virtex tree?   Grant Likely
      • how to get your linux-2.6-virtex tree?   Ming Liu
• little endian page mapping on PQ3   Jose Almeida
  • little endian page mapping on PQ3   Clemens Koller
• little endian page mapping on PQ3   Joyeau Sylvain
  • little endian page mapping on PQ3   Jose Almeida
    • little endian page mapping on PQ3   David Hawkins
      • [linux kernel 2.6.19] ethernet driver for Marvell bridge GT-64260   joachim.bader at diehl-aerospace.de
      • [linux kernel 2.6.19] ethernet driver for Marvell bridge GT-64260   Dale Farnsworth
• 8555CDS BSP on 8548CDS board   mike zheng
  • 8555CDS BSP on 8548CDS board   Andy Fleming
  • 8555CDS BSP on 8548CDS board   mike zheng
• Problems on porting linux 2.6 to xilinx ML410   林瑶
• Has anyone run MontaVista linux-xilinx-26.git based on kernel 2.6.22 successfully?   angelalinyao at 163.com
  • NFS failed in linux-2.6-virtex tree for xilinx ML403   Ming Liu
    • Network Bad Kernel Access   Glenn.G.Hart at us.westinghouse.com
• pata_mpc52xx - no interrupts when using bestcomm/dma?   Domen Puncer
  • pata_mpc52xx - no interrupts when using bestcomm/dma?   Wolfgang Denk
• how to debug the linux kernel with a BDI2000   jxnuxdy
  • how to debug the linux kernel with a BDI2000   Detlev Zundel
• MDIO bus hotplug   DI BACCO ANTONIO - technolabs
  • MDIO bus hotplug   Andy Fleming
  • Newbie and linux on virtex-II ppc   schardt
    • Newbie and linux on virtex-II ppc   Grant Likely
      • Newbie and linux on virtex-II ppc   schardt
      • Newbie and linux on virtex-II ppc   Grant Likely
      • Newbie and linux on virtex-II ppc   schardt
      • Newbie and linux on virtex-II ppc   Ming Liu
• Linux doesn not boot from u-boot on ML403   Mirek23
  • Linux doesn not boot from u-boot on ML403   Grant Likely
    • Linux doesn not boot from u-boot on ML403   Miroslaw Dach
    • Linux doesn not boot from u-boot on ML403   Grant Likely
    • Linux doesn not boot from u-boot on ML403   Miroslaw Dach
    • Linux doesn not boot from u-boot on ML403   Grant Likely
    • Linux doesn not boot from u-boot on ML403   Miroslaw Dach
    • Linux doesn not boot from u-boot on ML403   Grant Likely
    • Linux doesn not boot from u-boot on ML403   Miroslaw Dach
    • Linux doesn not boot from u-boot on ML403   Grant Likely
    • Linux doesn not boot from u-boot on ML403   Miroslaw Dach
    • Linux doesn not boot from u-boot on ML403   Grant Likely
    • Linux doesn not boot from u-boot on ML403   Miroslaw Dach
    • Linux doesn not boot from u-boot on ML403   Grant Likely
    • Linux doesn not boot from u-boot on ML403   Miroslaw Dach
    • Linux doesn not boot from u-boot on ML403   Miroslaw Dach
    • Linux doesn not boot from u-boot on ML403   Grant Likely
    • Linux doesn not boot from u-boot on ML403   Miroslaw Dach
• Broadcom HT1000/HT2000 or HT1100 support in IBM PowerPC 970MP/Fx   Ashok Hegde
  • Broadcom HT1000/HT2000 or HT1100 support in IBM PowerPC 970MP/Fx   Benjamin Herrenschmidt
• ppc/powerpc, remote debugging (ptrace), floating point variables   Visser, Udo RD-IS-E23
  • ppc/powerpc, remote debugging (ptrace), floating point variables   Kumar Gala
• [PATCH] ppc32/8xx: Fix r3 trashing due to 8MB TLB page instantiation   Jochen Friedrich
  • [PATCH] ppc32/8xx: Fix r3 trashing due to 8MB TLB page instantiation   Marcelo Tosatti
    • [PATCH] ppc32/8xx: Fix r3 trashing due to 8MB TLB page instantiation   Kumar Gala
    • [PATCH] ppc32/8xx: Fix r3 trashing due to 8MB TLB page instantiation   Jochen Friedrich
• Newbie and linux on virtex-II ppc   Grant Likely
  • Newbie and linux on virtex-II ppc   schardt
    • Newbie and linux on virtex-II ppc   Grant Likely
    • Newbie and linux on virtex-II ppc   schardt
    • Newbie and linux on virtex-II ppc   Grant Likely
    • Newbie and linux on virtex-II ppc   schardt
    • Newbie and linux on virtex-II ppc   Grant Likely
    • Newbie and linux on virtex-II ppc   Grant Likely
    • Newbie and linux on virtex-II ppc   schardt
    • Newbie and linux on virtex-II ppc   schardt
    • Newbie and linux on virtex-II ppc   Grant Likely
• Linux kernel config for ep8280m   Manil Gaouar
• ppc_8xx-gcc from eldk strange behaviour   DI BACCO ANTONIO - technolabs
  • ppc_8xx-gcc from eldk strange behaviour   Scott Wood
    • ppc_8xx-gcc from eldk strange behaviour   DI BACCO ANTONIO - technolabs
    • ppc_8xx-gcc from eldk strange behaviour   Wolfgang Denk
  • ppc_8xx-gcc from eldk strange behaviour   Ricardo Scop
• Bill F wants to chat   Bill F
• Sorry - please ignore Re: Bill F wants to chat   Bill F
• linux2.6.17.4 with temac patch running on ML403 hung while initializing from ramdisk   angelalinyao at 163.com
• 2.6 kernel hangs after loading device tree   charanya venkatraman
• 2.6 kernel hangs after loading device tree   charanya venkatraman
• [PATCH] Fix CPM1 uart console   Jochen Friedrich
• Network is blocked till ping is issued   DI BACCO ANTONIO - technolabs
  • Network is blocked till ping is issued(update)   DI BACCO ANTONIO - technolabs
  • Network is blocked till ping is issued   Florian A. Voegel
    • Network is blocked till ping is issued   DI BACCO ANTONIO - technolabs
      • Network is blocked till ping is issued   Andy Gospodarek
      • Network is blocked till ping is issued   DI BACCO ANTONIO - technolabs
• Register MII_SPEED periodically set to 0 (who is it?)   DI BACCO ANTONIO - technolabs
• spin_lock doesn't work?!?   melinda develey
  • spin_lock doesn't work?!?   Scott Wood
  • spin_lock doesn't work?!?   Wolfgang Reissnegger
    • spin_lock doesn't work?!?   melinda develey
    • spin_lock doesn't work?!?   Josh Boyer
    • spin_lock doesn't work?!?   Wolfgang Reissnegger
• Xilinx Virtex boot   Robert Woodworth
  • Xilinx Virtex boot   Grant Likely
    • Xilinx Virtex boot   Robert Woodworth
      • Xilinx Virtex boot   Grant Likely
      • Xilinx Virtex boot (And MPMC)   Stephen Neuendorffer
    • Xilinx Virtex boot   Robert Woodworth
• ML403 AC97 ALSA Driver problem   Qin Lin
• The question about the relocate_code on u-boot for MPC8360?   郭劲
  • ML403 Hard TEMAC, PLB and Linux 2.6   linux-ppc at eurotel.it
• U-Boot + Linux 2.6 on MPC8270   eha

Last message date: Fri Aug 31 18:59:47 EST 2007
Archived on: Fri Aug 31 19:05:26 EST 2007

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...