Linux 2.6.23.rc3 boot issues on XUPV2P

[Grant Likely]

On 8/21/07, Computer - Service <computer-service at gmx.de> wrote:
> Hi all.
>
> I try to port Linux 2.6 on my XUPV2P Board which is based on ML300.
>
> It runs sometimes, but for the usual case it just doesn't.
> My problem is the initialization.
> I have no clue why I get different values almost every time.
> This is a log from the same zImage.elf, which is just loaded certain
> times in the row:

Check that the Virtex support code in
arch/ppc/boot/simple/embed_config.c is getting compiled in (hint:
search for ML403).  If it's configured out, then your board info
structure won't get setup correctly.

Cheers,
g.

-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
grant.likely at secretlab.ca
(403) 399-0195