STK5200 pci_enable_device problem

Mustafa Cayir mustafa.cayir at
Tue Aug 28 18:51:10 EST 2007


i build Linux-2.6.22-gbcfc8d37 kernel lastest kernel from denx git for the board (STK5200 with TQM5200-AB).
ELDK 4.1 version is used.

make mrproper
export ARCH=powerpc
make tqm5200_defconfig
make uImage

It hangs on after  following line
  Uncompressing Kernel Image ... OK

Our u-boot version : U-Boot 1.1.3 (Apr  7 2005 - 14:42:37)

Any idea will be appreciated.


Bytes transferred = 1454056 (162fe8 hex)
## Booting image at 00200000 ...
   Image Name:   Linux-2.6.22-gbcfc8d37
   Created:      2007-08-28  19:41:27 UTC
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1453992 Bytes =  1.4 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

-----Original Message-----
From: Wolfgang Denk [mailto:wd at]
Sent: Mon 8/27/2007 10:14 PM
To: Mustafa Cayir
Cc: Oliver Rutsch; linuxppc-embedded at
Subject: Re: STK5200 pci_enable_device problem
In message <7B9A8FF57DBB524190E98CABF6E56F070B927E at> you wrote:
> i use 2.4.25 kernel and eldk 3.1.1 on TQM5200 board. i tried denx 2.6.19
> kernel to port on TQM5200 but i couldn't.
> Did you port 2.6 kernel on TQM5200? Did pci device start working
> succesfully after porting 2.6 kernel to TQM5200 board.

Current top-of-tree in our git repo has been tested with a Intel
EEPRO100 network card in the ST5200's PCI slot. It's working.

Best regards,

Wolfgang Denk

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at
Unsichtbar macht sich die Dummheit, indem sie immer  größere  Ausmaße
annimmt.                             -- Bertold Brecht: Der Tui-Roman

-------------- next part --------------
An HTML attachment was scrubbed...

More information about the Linuxppc-embedded mailing list