[PATCH] [UPDATED] tsec: Allow Ten Bit Interface to be configurable

[Scott Wood]

Joe Hamman wrote:
> 		ethernet at 24000 {
> 			#address-cells = <1>;
> 			#size-cells = <0>;
> 			device_type = "network";
> 			model = "eTSEC";
> 			compatible = "gianfar";
> 			reg = <24000 1000>;
> 			mac-address = [ 00 E0 0C 00 73 00 ];
> 			interrupts = <1d 2 1e 2 22 2>;
> 			interrupt-parent = <&mpic>;
> 			phy-handle = <&phy1f>;
> 			tbi-handle = <&tbi1e>;
> 		};

Is any given board going to have at runtime (i.e. not jumper selectable) 
  both a phy and a tbi (I'm not very familiar with the latter, so I 
apologize if this is a dumb question).  If not, I'd stick with 
phy-handle and have something in the phy node to indicate that it's tbi.

-Scott