STK5200 pci_enable_device problem

[Mustafa Cayir]

Hello Oliver,

My problems continue, could you summarize your steps to bring up the board?
which u-boot version is used?
how build tqm5200.dts file?
did you test pci bus?

Thanks.


-----Original Message-----
From: linuxppc-embedded-bounces+mustafa.cayir=bte.mam.gov.tr at ozlabs.org on behalf of Oliver Rutsch
Sent: Thu 8/30/2007 12:19 PM
To: linuxppc-embedded at ozlabs.org
Subject: Re: STK5200 pci_enable_device problem
 
Hi again,

> 
> As mentioned above, with arch/powerpc you always need a  device  tree
> blob.
> 
> Best regards,
> 
> Wolfgang Denk
> 

Thanks, Wolfang, now it's booting fine!
I've updated u-boot to the newest git version, builded the device tree 
file and now everything's working.

Bye,

-- 
Dipl. Ing. Oliver Rutsch
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded at ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20070831/e0ac200d/attachment.htm