[PATCH] i2c-mpc: don't disable I2C module on stop condition.
Jean Delvare
khali at linux-fr.org
Thu Aug 9 03:19:13 EST 2007
Hi Domen,
On Tue, 24 Jul 2007 07:14:31 +0200, Domen Puncer wrote:
> Disabling module on stop doesn't work on some CPUs (ie. mpc8241,
> as reported by Guennadi Liakhovetski), so remove that.
>
> Disable I2C module on errors/interrupts to prevent it from
> locking up on mpc5200b.
>
>
> Signed-off-by: Domen Puncer <domen.puncer at telargo.com>
> ---
> Hi!
>
> So I fixed i2c on one board, and broke it on another :-(
> This patch works on both Guennadi's and mine (hey, it might break
> a third one!).
> Jean, can you please push this, if there are no objections
> and "doesn't work for me" reports.
Queued for 2.6.23-rc3, thanks. Guennadi, can you please confirm that
this patch fixes your problem?
>
>
> Domen
>
>
> drivers/i2c/busses/i2c-mpc.c | 9 ++++++---
> 1 file changed, 6 insertions(+), 3 deletions(-)
>
> Index: work-powerpc.git/drivers/i2c/busses/i2c-mpc.c
> ===================================================================
> --- work-powerpc.git.orig/drivers/i2c/busses/i2c-mpc.c
> +++ work-powerpc.git/drivers/i2c/busses/i2c-mpc.c
> @@ -105,6 +105,7 @@ static int i2c_wait(struct mpc_i2c *i2c,
> schedule();
> if (time_after(jiffies, orig_jiffies + timeout)) {
> pr_debug("I2C: timeout\n");
> + writeccr(i2c, 0);
> result = -EIO;
> break;
> }
> @@ -116,10 +117,12 @@ static int i2c_wait(struct mpc_i2c *i2c,
> result = wait_event_interruptible_timeout(i2c->queue,
> (i2c->interrupt & CSR_MIF), timeout * HZ);
>
> - if (unlikely(result < 0))
> + if (unlikely(result < 0)) {
> pr_debug("I2C: wait interrupted\n");
> - else if (unlikely(!(i2c->interrupt & CSR_MIF))) {
> + writeccr(i2c, 0);
> + } else if (unlikely(!(i2c->interrupt & CSR_MIF))) {
> pr_debug("I2C: wait timeout\n");
> + writeccr(i2c, 0);
> result = -ETIMEDOUT;
> }
>
> @@ -172,7 +175,6 @@ static void mpc_i2c_start(struct mpc_i2c
> static void mpc_i2c_stop(struct mpc_i2c *i2c)
> {
> writeccr(i2c, CCR_MEN);
> - writeccr(i2c, 0);
> }
>
> static int mpc_write(struct mpc_i2c *i2c, int target,
> @@ -261,6 +263,7 @@ static int mpc_xfer(struct i2c_adapter *
> while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) {
> if (signal_pending(current)) {
> pr_debug("I2C: Interrupted\n");
> + writeccr(i2c, 0);
> return -EINTR;
> }
> if (time_after(jiffies, orig_jiffies + HZ)) {
--
Jean Delvare
More information about the Linuxppc-embedded
mailing list