January 2003 Archives by thread
Starting: Wed Jan 1 03:13:05 EST 2003
Ending: Fri Jan 31 23:51:57 EST 2003
Messages: 373
- linuxppc_2_4_devel patch: 8xx FEC extensions
Tom Rini
- ioremap64 and remap_page_range in 440GP
Vishwanath
- gcc optimizes loops badly.
Joakim Tjernlund
- gcc optimizes loops badly.
Joakim Tjernlund
- gcc optimizes loops badly.
Eisenhut, Daniel (MED)
- linuxppc_2_4_devel patch: 8xx FEC extensions
Dan Malek
- MMU on the power pc 860
Muaddi, Cecilia
- linuxppc_2_4_devel patch: 8xx FEC extensions
Tom Rini
- MMU on the power pc 860
Muaddi, Cecilia
- Wanted: Ebony Rev C board
Chris Zimman
- linuxppc_2_4_devel patch: 8xx FEC extensions
Tom Rini
- DMA and caches -- 'correct handling'?
Mark Pilon
- linuxppc_2_4_devel patch: 8xx FEC extensions
Paul Mackerras
- mcc in mpc8260.
Omanakuttan
- mapping back to 36 bit physical
Matt Porter
- Accessing I2C from User Space
Matt Porter
- non-PCI OHCI (STBxxxx)
Felix Domke
- Incoming to hostme.bitkeeper.com:/ua/repos/p/ppc/linuxppc-2.5
Tom Rini
- wireless lan PCMCIA card advice
curt brune
- wireless lan PCMCIA card advice
Steven Blakeslee
- Whats the "standard" embedded C lib?
James Don
- Whats the "standard" embedded C lib?
James Don
- Compiling ULibc and gcc questions
James Don
- BDI-2000
Muaddi, Cecilia
- BDI-2000
Jerry Van Baren
- BDI-2000
James Don
- BDI-2000
James Don
- BDI-2000
Kerl, John
- 405LP - Beech with SSX firmware
Hollis Blanchard
- BDI-2000
Muaddi, Cecilia
- BDI-2000
Muaddi, Cecilia
- bdi200 or powertap.. help me to decide.
Omanakuttan
- embed_config undefined?
Xiaogeng (Shawn) Jin
- access memory mapped registers
Muaddi, Cecilia
- access memory mapped registers
Kerl, John
- access memory mapped registers
Wolfgang Denk
- access memory mapped registers
Muaddi, Cecilia
- 405LP PCMCIA cleanup
David Gibson
- access memory mapped registers
Wolfgang Denk
- SELF: compile of util-linux
James Don
- SELF: compile of util-linux
James Don
- SELF: compile of util-linux
James Don
- Definitions for c_cflag etc. in termbits.h???
Milliorn Gary-rxcr80
- [PATCH] ppc_ksyms.c (linuxppc-2.5)
"David Müller (ELSOFT AG)"
- Where is lilo.conf in the kernel source tree?
Khai Trinh
- vmlinx and ppcboot
Xiaogeng (Shawn) Jin
- vmlinx and ppcboot
Wolfgang Denk
- GCC: why can't i compile with --enable-threads
James Don
- SELF: ramdisk which required libraries if ...?
James Don
- SELF: ramdisk which required libraries if ...?
Wolfgang Denk
- SELF: ramdisk which required libraries if ...?
James Don
- RAMDISK IMAGES: why no ethernet in my image ... but denx ok
James Don
- RAMDISK IMAGES(2): ash has no job control ??? ... can't access tt y; job control turned off
James Don
- RAMDISK IMAGES(2): ash has no job control ??? ... can't acces s tt y; job control turned off
James Don
- RAMDISK IMAGES: why no ethernet in my image ... but denx ok
Wolfgang Denk
- RAMDISK IMAGES(2): ash has no job control ??? ... can't acces s tt y; job control turned off
Wolfgang Denk
- Problem about 860 fec ping
leeyang
- Smallest Initrd (ram disk)
Prakash kanthi
- Virtex II Pro FPGA and Linux
Rudolf Ladyzhenskii
- RAMDISK IMAGES(2): ash has no job control ??? ... can't acces s tt y; job control turned off
James Don
- access memory mapped registers
Kenneth Johansson
- 8xx SCC and SMC uart latency
Jerry Van Baren
- Assistance with using /dev/fb0 and No X windows
Gallant, John
- Control-C in bash ???
Mark Chambers
- Control-C in bash ???
Kerl, John
- Control-C in bash ???
Kerl, John
- Control-C in bash ???
Kerl, John
- RPM: how do i un-pack an rpm without installing ...
James Don
- RAMDISK IMAGES(2): ash has no job control ??? ... can't acces s tt y; job control turned off
James Don
- Configure 8xx_io in 2.4.21-pre3
Xiaogeng (Shawn) Jin
- RPM: how do i un-pack an rpm without installing ...
Claus Gindhart
- Assistance with using /dev/fb0 and No X windows
Claus Gindhart
- RPM: how do i un-pack an rpm without installing ...
James Don
- Configure 8xx_io in 2.4.21-pre3
James Don
- Configure 8xx_io in 2.4.21-pre3
James Don
- Assistance with using /dev/fb0 and No X windows
Gallant, John
- Debugging the kernel with BDI2000
Xiaogeng (Shawn) Jin
- 2.5 and request_8xxirq
Pantelis Antoniou
- 8xx SCC and SMC uart latency
Jerry Van Baren
- How is eth0 config?
James Don
- How is eth0 config?
James Don
- irc.openprojects.net?
Mark Hatle
- where to find cross dev debian packages?
Abraham van der Merwe
- Hi
Jerry Van Baren
- Serial Console
Aman
- any body port ATMEL WLAN driver on PPC successfully?
Wang Jacky
- building lilo, grub or PPCBoot for a custom board
BREUVART Jean-Charles
- building lilo, grub or PPCBoot for a custom board
Jerry Van Baren
- make menuconfig fails.
Denis Rouleau
- A few questions in embedded linux
Khai Trinh
- IMMR and internel 860 mem
James Don
- A few questions in embedded linux
Roland Dreier
- MCR question
Laudney Ren
- openpic and serial interupt mode of mpc107
b y
- 405GPr with GLIBC 2.2.1 (ELDK) and 64MB OK, but panic with 128 MB
- New style dpalloc/hostalloc routines (diff).
Tom Rini
- make menuconfig fails.
Jaap-Jan Boor
- MTD device
Muaddi, Cecilia
- Problem with data cache on MPC823E
Jan Damborsky
- Need IDE for embedded Linux project
brian.auld at adic.com
- Problem with data cache on MPC823E
Wells, Charles
- Need IDE for embedded Linux project
Jerry Van Baren
- Need IDE for embedded Linux project
Rod Boyce
- Need IDE for embedded Linux project
brian.auld at adic.com
- Need IDE for embedded Linux project
Kerl, John
- Need IDE for embedded Linux project
James Don
- Need IDE for embedded Linux project
Kerl, John
- Need IDE for embedded Linux project
Rod Boyce
- My Memory map ... how do i pick the virtual address (Aside from i mmr and sdram)
James Don
- busybox source
Prakash kanthi
- My Memory map ... how do i pick the virtual address (Aside fr om i mmr and sdram)
Rod Boyce
- My Memory map ... how do i pick the virtual address (Aside fr om i mmr and sdram)
Rod Boyce
- My Memory map ... how do i pick the virtual address (Aside fr om i mmr and sdram)
James Don
- CONFIG_SERIAL_TEXT_DEBUG works ?
b y
- ppcboot for mpc8260ads board.
Omanakuttan
- Problem with data cache on MPC823E
Jan Damborsky
- ppcboot for mpc8260ads board.
Omanakuttan
- wrong definition in cpm_8260.h?
Shen Rong
- Problem Exporting Symbol
Jerry Van Baren
- Lauterbach ICD In-Circuit Debugger
Jaap-Jan Boor
- Lauterbach ICD In-Circuit Debugger
llandre
- Problem Exporting Symbol
Jerry Van Baren
- Antw: Re: Lauterbach ICD In-Circuit Debugger
Rod Boyce
- where to get ppc_8xx-gdb
Muaddi, Cecilia
- Linux Kernel hangs after execve('/bin/sh')
Jean-Denis Boyer
- where to get ppc_8xx-gdb
Dr. Craig Hollabaugh
- Problem with BDI2000 flash programming
Jason Park
- Problem with BDI2000 flash programming
Rod Boyce
- MPC850: USB+SCC3_uart
Christian Schroeder
- uncompressing linux... (it hangs after this message)
Omanakuttan
- PCMCIA on TQM8xxL
Leonardo Pereira Santos
- Does 'Bitkeeper' work according to the 'kernel sources' link @ pp cpenguin.org
brian.auld at adic.com
- How do you change the program counter (PC)
Jason Park
- Question: insmod QM_MODULES
James Don
- Hi
RamanaYV
- [PATCH] m8xx_setup.c and PCMCIA
Dan Malek
- Problems installing DENX ELDK
brian.auld at adic.com
- where to find cross dev debian packages?
Tom Guilliams
- Status of 440GP support?
brian.auld at adic.com
- running bdi2000 (cpu in debug mode)
Omanakuttan
- Question: insmod QM_MODULES
James Don
- PPCBOOT in customized MPC860T board
RamanaYV
- BDI2000: What's the quickest way to get one??
brian.auld at adic.com
- kernel hangs in copy_and_flush while `lwzx` instruction
Omanakuttan
- Problem with data cache on MPC823E
Jan Damborsky
- USB on custom board
Gerhard TAEUBL
- Problem with data cache on MPC823E - now solved
Jan Damborsky
- PrPMC800 NON-Monarch patch
Anders Blomdell
- Halt command
xiaogeng_jin at agilent.com
- bdi2000
Muaddi, Cecilia
- bdi2000
Rod Boyce
- C++ Library recommendations ...
Jaap-Jan Boor
- [PATCH] arch/ppc/8xx_io/enet.c, version 3
Joakim Tjernlund
- Denx ELDK vs. Tool-Chain from Hollobaugh's book "Embedded Linux"
brian.auld at adic.com
- Program for Embedded & Kernel Development at fosdem 2003
Peter 'p2' De Schrijver
- how to halt m8xx?
xiaogeng_jin at agilent.com
- Can software discover MPC8xx variant?
Alex Zeffertt
- Can software discover MPC8xx variant?
Leonardo Pereira Santos
- Can software discover MPC8xx variant?
Steven Blakeslee
- I2C RTC with MPC8xx?
Keith Outwater
- Can software discover MPC8xx variant?
Steven Blakeslee
- Cross Compile Build Question
James Don
- how to halt m8xx?
xiaogeng_jin at agilent.com
- Howto install bootloader using jtag?
Nitesh Goyal
- Development hardware
Thomas Andrews
- Development hardware
Claus Gindhart
- question on mcc driver
Ing.Gianfranco Morandi
- powerpc.h compatibality for MVL!!!
Anand Franklin J
- Howto install bootloader using jtag?
Steven Blakeslee
- Trying to use ELDK to build Ebony/440GP
brian.auld at adic.com
- Howto install bootloader using jtag?
Nitesh Goyal
- Trying to use ELDK to build Ebony/440GP
brian.auld at adic.com
- Trying to use ELDK to build Ebony/440GP
brian.auld at adic.com
- Trying to use ELDK to build Ebony/440GP
xiaogeng_jin at agilent.com
- Trying to use ELDK to build Ebony/440GP
brian.auld at adic.com
- Trying to use ELDK to build Ebony/440GP
brian.auld at adic.com
- Ramdisk with wrong magic number
Leiying Du
- 3Com 574BT PCMCIA Card on PowerPC
Andreas Plaickner
- kgdb and mpc8xx
Ibon Gotxi Garcia
Last message date:
Fri Jan 31 23:51:57 EST 2003
Archived on: Mon Jul 23 17:59:46 EST 2007
This archive was generated by
Pipermail 0.09 (Mailman edition).