Need IDE for embedded Linux project

[brian.auld at adic.com]

Everyone,

I am overwhelmed and grateful for all your input.

Keep it coming. I'm busy absorbing and following up on everything written so
far, but could very well have more questions.

Thanks

-- Brian

-----Original Message-----
From: Rod Boyce [mailto:rod_boyce at stratexnet.com]
Sent: Tuesday, January 21, 2003 4:18 PM
To: linuxppc-embedded at lists.linuxppc.org
Subject: RE: Need IDE for embedded Linux project


I agree with what hs been said except for one thing use tight VNC I have
found it to be faster than the original VNC.  It is well supported and works
very well the web site is www.tightvnc.com it is still open source.


 -----Original Message-----
From: 	Jerry Van Baren [mailto:gerald.vanbaren at smiths-aerospace.com]
Sent:	Wednesday, 22 January 2003 10:08 a.m.
To:	linuxppc-embedded at lists.linuxppc.org
Subject:	Re: Need IDE for embedded Linux project



Check out VNC http://www.uk.research.att.com/vnc/ -- it is an open software
"PCanywhere" type program that works very well under linux and quite well
under Windows.  Exceed (X windows on Microsoft Windows) is a nice program
but pretty expensive.

gvb


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/