January 2003 Archives by date
Starting: Wed Jan 1 03:13:05 EST 2003
Ending: Fri Jan 31 23:51:57 EST 2003
Messages: 373
- linuxppc_2_4_devel patch: 8xx FEC extensions
Tom Rini
- ioremap64 and remap_page_range in 440GP
Vishwanath
- gcc optimizes loops badly.
Joakim Tjernlund
- gcc optimizes loops badly.
Joakim Tjernlund
- gcc optimizes loops badly.
Eisenhut, Daniel (MED)
- gcc optimizes loops badly.
Joakim Tjernlund
- linuxppc_2_4_devel patch: 8xx FEC extensions
Wolfgang Denk
- linuxppc_2_4_devel patch: 8xx FEC extensions
Dan Malek
- MMU on the power pc 860
Muaddi, Cecilia
- linuxppc_2_4_devel patch: 8xx FEC extensions
Tom Rini
- MMU on the power pc 860
Joe Hamman
- MMU on the power pc 860
Muaddi, Cecilia
- Wanted: Ebony Rev C board
Chris Zimman
- linuxppc_2_4_devel patch: 8xx FEC extensions
Tom Rini
- DMA and caches -- 'correct handling'?
Mark Pilon
- linuxppc_2_4_devel patch: 8xx FEC extensions
Paul Mackerras
- linuxppc_2_4_devel patch: 8xx FEC extensions
Dan Malek
- mcc in mpc8260.
Omanakuttan
- mcc in mpc8260.
Omanakuttan
- mapping back to 36 bit physical
Matt Porter
- Accessing I2C from User Space
Matt Porter
- ioremap64 and remap_page_range in 440GP
Matt Porter
- non-PCI OHCI (STBxxxx)
Felix Domke
- Incoming to hostme.bitkeeper.com:/ua/repos/p/ppc/linuxppc-2.5
Tom Rini
- request_irq, MPX8xx, IDE, PCMCIA, ...
Steven Scholz
- request_irq, MPX8xx, IDE, PCMCIA, ...
Tom Rini
- wireless lan PCMCIA card advice
curt brune
- wireless lan PCMCIA card advice
Steven Blakeslee
- wireless lan PCMCIA card advice
Wolfgang Denk
- wireless lan PCMCIA card advice
curt brune
- wireless lan PCMCIA card advice
Wolfgang Denk
- Whats the "standard" embedded C lib?
James Don
- Whats the "standard" embedded C lib?
Mark Hatle
- Whats the "standard" embedded C lib?
James Don
- Compiling ULibc and gcc questions
James Don
- BDI-2000
Muaddi, Cecilia
- BDI-2000
Marius Groeger
- BDI-2000
Jerry Van Baren
- BDI-2000
James Don
- BDI-2000
James Don
- BDI-2000
Hollis Blanchard
- PrPMC800 running as NON-MONARCH
Anders Blomdell
- BDI-2000
Marius Groeger
- BDI-2000
Kerl, John
- 405LP - Beech with SSX firmware
Hollis Blanchard
- BDI-2000
Muaddi, Cecilia
- BDI-2000
Wolfgang Denk
- BDI-2000
Muaddi, Cecilia
- BDI-2000
Wolfgang Denk
- 405LP - Beech with SSX firmware
David Gibson
- bdi200 or powertap.. help me to decide.
Omanakuttan
- bdi200 or powertap.. help me to decide.
Wolfgang Denk
- Booting Linux from an already running linux
Anders Blomdell
- Booting Linux from an already running linux
Wolfgang Denk
- Calling Application
Aman
- Calling Application
Wolfgang Denk
- Calling Application
Dr. Craig Hollabaugh
- Calling Application
Der Herr Hofrat
- embed_config undefined?
Xiaogeng (Shawn) Jin
- access memory mapped registers
Muaddi, Cecilia
- access memory mapped registers
Wolfgang Denk
- access memory mapped registers
Kerl, John
- access memory mapped registers
Wolfgang Denk
- access memory mapped registers
Muaddi, Cecilia
- 405LP PCMCIA cleanup
David Gibson
- access memory mapped registers
Wolfgang Denk
- access memory mapped registers
Wolfgang Denk
- SELF: compile of util-linux
James Don
- SELF: compile of util-linux
James Don
- AW: access memory mapped registers
Georg Klug
- SELF: compile of util-linux
James Don
- Definitions for c_cflag etc. in termbits.h???
Steven Scholz
- Definitions for c_cflag etc. in termbits.h???
Milliorn Gary-rxcr80
- Definitions for c_cflag etc. in termbits.h???
Marius Groeger
- Definitions for c_cflag etc. in termbits.h???
Wolfgang Denk
- Definitions for c_cflag etc. in termbits.h???
Steven Scholz
- Definitions for c_cflag etc. in termbits.h???
Wolfgang Denk
- Very slow shell from internal MPC8241 UART
Frederic Soulier
- Definitions for c_cflag etc. in termbits.h???
"David Müller (ELSOFT AG)"
- [PATCH] ppc_ksyms.c (linuxppc-2.5)
"David Müller (ELSOFT AG)"
- PrPMC800 - Restarting PPC7-Bug without a reset
Anders Blomdell
- Where is lilo.conf in the kernel source tree?
Khai Trinh
- Very slow shell from internal MPC8241 UART
Jim Thompson
- Where is lilo.conf in the kernel source tree?
Der Herr Hofrat
- vmlinx and ppcboot
Xiaogeng (Shawn) Jin
- vmlinx and ppcboot
Wolfgang Denk
- vmlinx and ppcboot
Wolfgang Denk
- GCC: why can't i compile with --enable-threads
James Don
- SELF: ramdisk which required libraries if ...?
James Don
- SELF: ramdisk which required libraries if ...?
Wolfgang Denk
- SELF: ramdisk which required libraries if ...?
Wolfgang Denk
- SELF: ramdisk which required libraries if ...?
James Don
- RAMDISK IMAGES: why no ethernet in my image ... but denx ok
James Don
- RAMDISK IMAGES(2): ash has no job control ??? ... can't access tt y; job control turned off
James Don
- RAMDISK IMAGES(2): ash has no job control ??? ... can't access tt y; job control turned off
Der Herr Hofrat
- RAMDISK IMAGES(2): ash has no job control ??? ... can't acces s tt y; job control turned off
James Don
- RAMDISK IMAGES(2): ash has no job control ??? ... can't access tt y; job control turned off
Eugene Surovegin
- RAMDISK IMAGES(2): ash has no job control ??? ... can't access tt y; job control turned off
Eugene Surovegin
- RAMDISK IMAGES: why no ethernet in my image ... but denx ok
Wolfgang Denk
- RAMDISK IMAGES(2): ash has no job control ??? ... can't acces s tt y; job control turned off
Wolfgang Denk
- RAMDISK IMAGES(2): ash has no job control ??? ... can't access tt y; job control turned off
Wolfgang Denk
- RAMDISK IMAGES(2): ash has no job control ??? ... can't acces s tt y; job control turned off
Wolfgang Denk
- Problem about 860 fec ping
leeyang
- Smallest Initrd (ram disk)
Prakash kanthi
- Virtex II Pro FPGA and Linux
Rudolf Ladyzhenskii
- Virtex II Pro FPGA and Linux
Peter Ryser
- Smallest Initrd (ram disk)
Wolfgang Denk
- GMRP and GVRP on linux stack
Alexander.J at lntinfotech.com
- Virtex II Pro FPGA and Linux
Peter Vandenabeele
- 8xx SCC and SMC uart latency
Eli Brin
- RAMDISK IMAGES(2): ash has no job control ??? ... can't acces s tt y; job control turned off
James Don
- 8xx SCC and SMC uart latency
Wolfgang Denk
- access memory mapped registers
Kenneth Johansson
- RAMDISK IMAGES(2): ash has no job control ??? ... can't acces s tt y; job control turned off
Wolfgang Denk
- 8xx SCC and SMC uart latency
Jerry Van Baren
- Assistance with using /dev/fb0 and No X windows
Gallant, John
- vmlinx and ppcboot
Xiaogeng (Shawn) Jin
- vmlinx and ppcboot
Wolfgang Denk
- Control-C in bash ???
Mark Chambers
- Control-C in bash ???
Kerl, John
- Control-C in bash ???
Der Herr Hofrat
- Control-C in bash ???
Kerl, John
- Control-C in bash ???
Wolfgang Denk
- Control-C in bash ???
Mark Chambers
- Control-C in bash ???
Chris Wedgwood
- Control-C in bash ???
Kerl, John
- RPM: how do i un-pack an rpm without installing ...
James Don
- RAMDISK IMAGES(2): ash has no job control ??? ... can't acces s tt y; job control turned off
James Don
- RPM: how do i un-pack an rpm without installing ...
Mark Hatle
- Configure 8xx_io in 2.4.21-pre3
Xiaogeng (Shawn) Jin
- RPM: how do i un-pack an rpm without installing ...
Claus Gindhart
- Assistance with using /dev/fb0 and No X windows
Claus Gindhart
- Control-C in bash ???
Alex Zeffertt
- Control-C in bash ???
Mark Chambers
- Control-C in bash ???
Wolfgang Denk
- Control-C in bash ???
Dan Malek
- RPM: how do i un-pack an rpm without installing ...
James Don
- Where is lilo.conf in the kernel source tree?
Tom Rini
- Configure 8xx_io in 2.4.21-pre3
James Don
- Assistance with using /dev/fb0 and No X windows
Chirag Kantharia
- Configure 8xx_io in 2.4.21-pre3
Xiaogeng (Shawn) Jin
- Configure 8xx_io in 2.4.21-pre3
James Don
- ramdisk mount problem
Prakash kanthi
- ramdisk mount problem
Wolfgang Denk
- Assistance with using /dev/fb0 and No X windows
Gallant, John
- Debugging the kernel with BDI2000
Xiaogeng (Shawn) Jin
- Assistance with using /dev/fb0 and No X windows
Chirag Kantharia
- ramdisk mount problem
Frederic Soulier
- 2.5 and request_8xxirq
Pantelis Antoniou
- Assistance with using /dev/fb0 and No X windows
Mark Powell
- Assistance with using /dev/fb0 and No X windows
David Gibson
- AW: Assistance with using /dev/fb0 and No X windows
Klaus Popp
- AW: Assistance with using /dev/fb0 and No X windows
Wolfgang Denk
- Assistance with using /dev/fb0 and No X windows
Mark Powell
- 8xx SCC and SMC uart latency
Eli Brin
- 8xx SCC and SMC uart latency
Jerry Van Baren
- 8xx SCC and SMC uart latency
Wolfgang Denk
- 8xx SCC and SMC uart latency
Wolfgang Denk
- How is eth0 config?
James Don
- How is eth0 config?
James Don
- How is eth0 config?
Wolfgang Denk
- 2.5 and request_8xxirq
Allen Curtis
- 2.5 and request_8xxirq
Pantelis Antoniou
- irc.openprojects.net?
Mark Hatle
- where to find cross dev debian packages?
Abraham van der Merwe
- Kernel crash with cardbus bridge
Matthias Fuchs
- 2.5 and request_8xxirq
Tom Rini
- Booting Linux from an already running linux
Tom Rini
- Ramdisk details; execve("/bin/sh") output
Prakash kanthi
- Hi
Anish
- AW: AW: Assistance with using /dev/fb0 and No X windows
Klaus Popp
- Hi
Wolfgang Denk
- Ramdisk details; execve("/bin/sh") output
Wolfgang Denk
- Embedix and X windows
Alexander.J at lntinfotech.com
- Hi
Jerry Van Baren
- Serial Console
Aman
- any body port ATMEL WLAN driver on PPC successfully?
Wang Jacky
- building lilo, grub or PPCBoot for a custom board
BREUVART Jean-Charles
- building lilo, grub or PPCBoot for a custom board
Jerry Van Baren
- building lilo, grub or PPCBoot for a custom board
Wolfgang Denk
- make menuconfig fails.
Denis Rouleau
- A few questions in embedded linux
Khai Trinh
- A few questions in embedded linux
Kedar Madineni
- A few questions in embedded linux
Dr. Craig Hollabaugh
- A few questions in embedded linux
Wolfgang Denk
- [PrPMC800] Allocating DMA-able memory with scarce PCI resources
Anders Blomdell
- IMMR and internel 860 mem
James Don
- A few questions in embedded linux
Roland Dreier
- MCR question
Laudney Ren
- MCR question
Frank Robbins
- openpic and serial interupt mode of mpc107
b y
- 405GPr with GLIBC 2.2.1 (ELDK) and 64MB OK, but panic with 128 MB
- New style dpalloc/hostalloc routines (diff).
Tom Rini
- openpic and serial interupt mode of mpc107
Tom Rini
- make menuconfig fails.
Jaap-Jan Boor
- MTD device
Muaddi, Cecilia
- MTD device
Kim, Kwansuk
- Problem with data cache on MPC823E
Jan Damborsky
- Problem with data cache on MPC823E
Wolfgang Denk
- Need IDE for embedded Linux project
brian.auld at adic.com
- Need IDE for embedded Linux project
Dr. Craig Hollabaugh
- Problem with data cache on MPC823E
Wells, Charles
- Need IDE for embedded Linux project
Jerry Van Baren
- Need IDE for embedded Linux project
Rod Boyce
- Need IDE for embedded Linux project
brian.auld at adic.com
- Need IDE for embedded Linux project
Roland Dreier
- Need IDE for embedded Linux project
Dr. Craig Hollabaugh
- Need IDE for embedded Linux project
Kerl, John
- Need IDE for embedded Linux project
James Don
- Need IDE for embedded Linux project
Kerl, John
- Need IDE for embedded Linux project
Rod Boyce
- My Memory map ... how do i pick the virtual address (Aside from i mmr and sdram)
James Don
- busybox source
Prakash kanthi
- busybox source
HyunKook Kim
- My Memory map ... how do i pick the virtual address (Aside fr om i mmr and sdram)
Rod Boyce
- My Memory map ... how do i pick the virtual address (Aside fr om i mmr and sdram)
Rod Boyce
- My Memory map ... how do i pick the virtual address (Aside fr om i mmr and sdram)
James Don
- My Memory map ... how do i pick the virtual address (Aside fr om i mmr and sdram)
jgdon
- CONFIG_SERIAL_TEXT_DEBUG works ?
b y
- ppcboot for mpc8260ads board.
Omanakuttan
- busybox source
Wolfgang Denk
- ppcboot for mpc8260ads board.
Omanakuttan
- Problem with data cache on MPC823E
Jan Damborsky
- ppcboot for mpc8260ads board.
Omanakuttan
- Problem with data cache on MPC823E
Jan Damborsky
- Linux Kernel hangs after execve("/bin/sh")
Prakash kanthi
- Linux Kernel hangs after execve("/bin/sh")
Chirag Kantharia
- wrong definition in cpm_8260.h?
Shen Rong
- Problem Exporting Symbol
Jerry Van Baren
- Lauterbach ICD In-Circuit Debugger
Jaap-Jan Boor
- Lauterbach ICD In-Circuit Debugger
llandre
- wrong definition in cpm_8260.h?
Joakim Tjernlund
- Linux Kernel hangs after execve('/bin/sh')
Daris A Nevil
- Antw: Re: Lauterbach ICD In-Circuit Debugger
Klaus Heydeck
- Problem Exporting Symbol
Jerry Van Baren
- wrong definition in cpm_8260.h?
Dan Malek
- Antw: Re: Lauterbach ICD In-Circuit Debugger
Rod Boyce
- Linux Kernel hangs after execve('/bin/sh')
Prakash kanthi
- where to get ppc_8xx-gdb
Muaddi, Cecilia
- Linux Kernel hangs after execve('/bin/sh')
Mark Pilon
- Linux Kernel hangs after execve('/bin/sh')
Jean-Denis Boyer
- where to get ppc_8xx-gdb
Dr. Craig Hollabaugh
- where to get ppc_8xx-gdb
Wolfgang Denk
- wrong definition in cpm_8260.h?
Joakim Tjernlund
- wrong definition in cpm_8260.h?
Dan Malek
- wrong definition in cpm_8260.h?
Joakim Tjernlund
- Problem with BDI2000 flash programming
Jason Park
- Problem with BDI2000 flash programming
Rod Boyce
- Problem with BDI2000 flash programming
Vladimir Gurevich
- wrong definition in cpm_8260.h?
Shen Rong
- Problem with BDI2000 flash programming
Jason Park
- MPC850: USB+SCC3_uart
Christian Schroeder
- uncompressing linux... (it hangs after this message)
Omanakuttan
- PCMCIA on TQM8xxL
Leonardo Pereira Santos
- PCMCIA on TQM8xxL
Wolfgang Grandegger
- wrong definition in cpm_8260.h?
Dan Malek
- [PATCH] CPCI405 ide driver fixed
Stefan Roese
- Does 'Bitkeeper' work according to the 'kernel sources' link @ pp cpenguin.org
brian.auld at adic.com
- Does 'Bitkeeper' work according to the 'kernel sources' link @ pp cpenguin.org
Roland Dreier
- Does 'Bitkeeper' work according to the 'kernel sources' link @ pp cpenguin.org
Leonardo Pereira Santos
- Sandpoint X3 with MPC755
Dan Douglass
- Sandpoint X3 with MPC755
Mark A. Greer
- Sandpoint X3 with MPC755
Dan Douglass
- Sandpoint X3 with MPC755
Mark A. Greer
- Sandpoint X3 with MPC755
Dan Douglass
- How do you change the program counter (PC)
Jason Park
- Sandpoint X3 with MPC755
Mark A. Greer
- wrong definition in cpm_8260.h?
Shen Rong
- How do you change the program counter (PC)
Shen Rong
- Question: insmod QM_MODULES
James Don
- Question: insmod QM_MODULES
jgdon
- Linux Kernel hangs after execve("/bin/sh")
Jan Damborsky
- Linux Kernel hangs after execve("/bin/sh")
Prakash kanthi
- How do you change the program counter (PC)
Jason Park
- How do you change the program counter (PC)
Shen Rong
- Hi
RamanaYV
- How do you change the program counter (PC)
Kenneth Johansson
- [PATCH] m8xx_setup.c and PCMCIA
Dan Malek
- Making only part of memory DMA-able [CONFIG_DISCONTIGMEM?]
Anders Blomdell
- [PATCH] m8xx_setup.c and PCMCIA
Steven Scholz
- Problems installing DENX ELDK
brian.auld at adic.com
- Making only part of memory DMA-able [CONFIG_DISCONTIGMEM?]
Adrian Cox
- How do you change the program counter (PC)
erik.teose at exgate.tek.com
- where to find cross dev debian packages?
Tom Guilliams
- Need IDE for embedded Linux project
Kenneth Johansson
- Status of 440GP support?
brian.auld at adic.com
- Status of 440GP support?
Chris Zimman
- running bdi2000 (cpu in debug mode)
Omanakuttan
- Status of 440GP support?
Eugene Surovegin
- where to find cross dev debian packages?
Abraham van der Merwe
- Question: insmod QM_MODULES
James Don
- PPCBOOT in customized MPC860T board
RamanaYV
- BDI2000: What's the quickest way to get one??
brian.auld at adic.com
- kernel hangs in copy_and_flush while `lwzx` instruction
Omanakuttan
- kernel hangs in copy_and_flush while `lwzx` instruction
Dan Malek
- BDI2000: What's the quickest way to get one??
Chris Zimman
- Problems installing DENX ELDK
Eli Brin
- Problems installing DENX ELDK
Chris Hallinan
- [PATCH] m8xx_setup.c and PCMCIA
Paul Mackerras
- [PATCH] m8xx_setup.c and PCMCIA
Dan Malek
- Problem with data cache on MPC823E
Jan Damborsky
- gcc-3.2 and MPC8xx
Steven Scholz
- USB on custom board
Gerhard TAEUBL
- Problem with data cache on MPC823E - now solved
Jan Damborsky
- PrPMC800 NON-Monarch patch
Anders Blomdell
- gcc-3.2 and MPC8xx
Conn Clark
- Halt command
xiaogeng_jin at agilent.com
- bdi2000
Muaddi, Cecilia
- bdi2000
Rod Boyce
- C++ Library recommendations ...
jgdon
- C++ Library recommendations ...
Jim Don
- C++ Library recommendations ...
Jaap-Jan Boor
- C++ Library recommendations ...
Felix Domke
- [PATCH] arch/ppc/8xx_io/enet.c, version 3
Joakim Tjernlund
- Denx ELDK vs. Tool-Chain from Hollobaugh's book "Embedded Linux"
brian.auld at adic.com
- Denx ELDK vs. Tool-Chain from Hollobaugh's book "Embedded Linux"
Matt Porter
- C++ Library recommendations ...
Roland Dreier
- Program for Embedded & Kernel Development at fosdem 2003
Peter 'p2' De Schrijver
- how to halt m8xx?
xiaogeng_jin at agilent.com
- how to halt m8xx?
Steven Scholz
- problems with MPC8xx internal RTC !?
Steven Scholz
- problems with MPC8xx internal RTC !?
Frank Robbins
- how to halt m8xx?
Leonardo Pereira Santos
- I2C RTC with MPC8xx?
Steven Scholz
- I2C RTC with MPC8xx?
Wolfgang Denk
- I2C RTC with MPC8xx?
Steven Scholz
- ELDK rebuild from scratch on RHL 8.0
Eli Brin
- Can software discover MPC8xx variant?
Alex Zeffertt
- Can software discover MPC8xx variant?
Marius Groeger
- problems with MPC8xx internal RTC !?
Allen Curtis
- problems with MPC8xx internal RTC !?
Frank Robbins
- Can software discover MPC8xx variant?
Leonardo Pereira Santos
- Can software discover MPC8xx variant?
Steven Blakeslee
- I2C RTC with MPC8xx?
Keith Outwater
- Can software discover MPC8xx variant?
Leonardo Pereira Santos
- Can software discover MPC8xx variant?
Steven Blakeslee
- Cross Compile Build Question
James Don
- how to halt m8xx?
xiaogeng_jin at agilent.com
- Howto install bootloader using jtag?
Nitesh Goyal
- Howto install bootloader using jtag?
Michael Washburn
- Cross Compile Build Question
Allen Curtis
- Development hardware
Thomas Andrews
- Development hardware
Claus Gindhart
- question on mcc driver
Ing.Gianfranco Morandi
- I2C RTC with MPC8xx?
Steven Scholz
- I2C RTC with MPC8xx?
Wolfgang Denk
- powerpc.h compatibality for MVL!!!
Anand Franklin J
- Development hardware
Frank Robbins
- Development hardware
Wolfgang Denk
- Development hardware
Leonardo Pereira Santos
- How to use EP8260 MTD device?
OHMURA Yutaka
- Howto install bootloader using jtag?
Steven Blakeslee
- was: FEC on MPC860T & race condition
Steven Scholz
- Trying to use ELDK to build Ebony/440GP
brian.auld at adic.com
- was: FEC on MPC860T & race condition
Dan Malek
- Howto install bootloader using jtag?
Nitesh Goyal
- Trying to use ELDK to build Ebony/440GP
Matt Porter
- Can software discover MPC8xx variant?
Dan Malek
- Trying to use ELDK to build Ebony/440GP
brian.auld at adic.com
- Trying to use ELDK to build Ebony/440GP
Matt Porter
- Trying to use ELDK to build Ebony/440GP
brian.auld at adic.com
- Trying to use ELDK to build Ebony/440GP
Wolfgang Grandegger
- Trying to use ELDK to build Ebony/440GP
xiaogeng_jin at agilent.com
- Trying to use ELDK to build Ebony/440GP
brian.auld at adic.com
- Trying to use ELDK to build Ebony/440GP
Wolfgang Denk
- Trying to use ELDK to build Ebony/440GP
brian.auld at adic.com
- Trying to use ELDK to build Ebony/440GP
Wolfgang Denk
- Ramdisk with wrong magic number
Leiying Du
- mpc 8260 performance..
gopi at india.tejasnetworks.com
- was: FEC on MPC860T & race condition
Steven Scholz
- 3Com 574BT PCMCIA Card on PowerPC
Andreas Plaickner
- 3Com 574BT PCMCIA Card on PowerPC
Magnus Damm
- kgdb and mpc8xx
Ibon Gotxi Garcia
Last message date:
Fri Jan 31 23:51:57 EST 2003
Archived on: Mon Jul 23 17:59:46 EST 2007
This archive was generated by
Pipermail 0.09 (Mailman edition).