BDI-2000

[Wolfgang Denk]

Dear Cecilia,

in message <885489B3B89FB6449F93E525DF78777F064537 at srvnt506.ALLOPTIC.COM> you wrote:
>
>
> You are right, my ethernet mac address was not passed in properly.
> Furthermore, I had
> too many ethernet device configured for this board.  Should be only one
> ethernet devices.
> Once I fixed the problem, my linux kernel is now up and running on the
> custom board.

Congratulations!

> As to the PPC native gdb, i don't see it in my distribution from timeSys.
> Do you
> have a suggestion as to where can i get a copy?

Ummm.. since you mentioned you're running under RH, this  will  be  a
x86 host, so you need a cross-GDB. I have no idea what it's called in
TimeSys'  toolchain;  common names are ppc_8xx-gdb, powerpc-linux-gdb
or similar...

Best regards,

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
Hindsight is an exact science.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/