Sandpoint X3 with MPC755

[Mark A. Greer]

Dan Douglass wrote:

>Mark,
>
>Thanks, I do not have the kernel source from the development tree. I will download it. However, it appears that the Sandpoint boards supported in U-Boot are for the 8240 and the 8245. I guess that is where my work will begin.
>
>
Well, don't get depressed yet.  If it runs on the 8240/8245, it'll very
likely run on a 750/755.  Try asking on ppcboot-users at lists.sourceforge.net

Mark


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/