December 2007 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Sat Dec 1 00:00:22 EST 2007
Ending: Mon Dec 31 23:27:35 EST 2007
Messages: 1770

• CPM2 USB host driver   Vitaly Bordug
• CPM2 USB host driver   Vitaly Bordug
• [PATCH 0/24] powerpc: 4xx PCI, PCI-X and PCI-Express support among others   Olof Johansson
• [PATCH 1/11] ibm_newemac: Add BCM5248 and Marvell 88E1111 PHY support   Olof Johansson
• [PATCH 2/11] ibm_newemac: Add ET1011c PHY support   Olof Johansson
• [PATCH 1/11] ibm_newemac: Add BCM5248 and Marvell 88E1111 PHY support   Geert Uytterhoeven
• [PATCH v7 7/9] ipic: clean up unsupported ack operations   Kumar Gala
• [PATCH] Add MPC837xEMDS PCIE RC mode support   Kumar Gala
• [PATCH 24/24] powerpc: Base support for 440SPe "Katmai" eval board   Olof Johansson
• [PATCH] Add MPC837xEMDS PCIE RC mode support   Scott Wood
• [PATCH 0/24] powerpc: 4xx PCI, PCI-X and PCI-Express support among others   Kumar Gala
• [PATCH] Add MPC837xEMDS PCIE RC mode support   Scott Wood
• [PATCH 0/24] powerpc: 4xx PCI, PCI-X and PCI-Express support among others   Olof Johansson
• CPM2 USB host driver   Laurent Pinchart
• [PATCH 0/24] powerpc: 4xx PCI, PCI-X and PCI-Express support among others   Jon Loeliger
• [PATCH] powerpc: fix os-term usage on kernel panic   Will Schmidt
• CPM2 USB host driver   Anton Vorontsov
• PCI configuration registers(BARs)   mike zheng
• [PATCH 15/24] powerpc: early debug forces console log level to max   T Ziomek
• [PATCH] powerpc: fix os-term usage on kernel panic   Mike Strosaker
• qe: add ability to upload QE firmware   Timur Tabi
• [PATCH 18/24] powerpc: Base support for 440GX Taishan eval board   Josh Boyer
• [PATCH 24/24] powerpc: Base support for 440SPe "Katmai" eval board   Josh Boyer
• [PATCH 0/24] powerpc: 4xx PCI, PCI-X and PCI-Express support among others   Josh Boyer
• [RFC][PATCH] [POWERPC] Allow caching of kmap_atomic page   Benjamin Herrenschmidt
• [PATCH 0/24] powerpc: 4xx PCI, PCI-X and PCI-Express support among others   Benjamin Herrenschmidt
• [PATCH 15/24] powerpc: early debug forces console log level to max   Benjamin Herrenschmidt
• [PATCH 18/24] powerpc: Base support for 440GX Taishan eval board   Benjamin Herrenschmidt
• [PATCH 2/11] ibm_newemac: Add ET1011c PHY support   Benjamin Herrenschmidt
• [PATCH 0/24] powerpc: 4xx PCI, PCI-X and PCI-Express support among others   Olof Johansson
• [PATCH 2/11] ibm_newemac: Add ET1011c PHY support   Olof Johansson
• [PATCH 18/24] powerpc: Base support for 440GX Taishan eval board   Josh Boyer
• [PATCH 18/24] powerpc: Base support for 440GX Taishan eval board   Benjamin Herrenschmidt
• [PATCH 2/11] ibm_newemac: Add ET1011c PHY support   Kumar Gala
• [PATCH 15/24] powerpc: early debug forces console log level to max   T Ziomek
• [PATCH 15/24] powerpc: early debug forces console log level to max   Scott Wood
• [PATCH 15/24] powerpc: early debug forces console log level to max   Benjamin Herrenschmidt
• [PATCH 15/24] powerpc: early debug forces console log level to max   T Ziomek
• CPM2 USB host driver   Arnd Bergmann
• [RFC/PATCH] Add a device_initcall to machdep_calls   Grant Likely
• [RFC/PATCH] Add a device_initcall to machdep_calls   Benjamin Herrenschmidt
• CPM2 USB host driver   David Brownell
• [RFC/PATCH] Add a device_initcall to machdep_calls   Grant Likely
• [RFC/PATCH] Add a device_initcall to machdep_calls   Benjamin Herrenschmidt
• [PATCH] [POWERPC] Add machine initcall macros   Grant Likely
• [PATCH 0/24] powerpc: 4xx PCI, PCI-X and PCI-Express support among others   Josh Boyer
• [PATCH 0/24] powerpc: 4xx PCI, PCI-X and PCI-Express support among others   Doug Maxey
• [PATCH] [POWERPC] Add machine initcall macros   Benjamin Herrenschmidt
• [PATCH] [POWERPC] Add machine initcall macros   Michael Ellerman
• [PATCH] [POWERPC] Add machine initcall macros   Benjamin Herrenschmidt
• [PATCH 1/3] 4xx: Add 405EX CPU type needed for EMAC support on Kilauea   Stefan Roese
• [PATCH 2/3] 4xx: Change Kilauea dts to support new EMAC device tree properties   Stefan Roese
• [PATCH 3/3] 4xx: Add EMAC support to Kilauea defconfig   Stefan Roese
• [PATCH 1/3] [NET] phy/fixed.c: rework to not duplicate PHY layer functionality   Jochen Friedrich
• serial console autodetection not working on powermac   Olaf Hering
• [RFC] [PATCH] pasemi: NMI support with MPIC   Olof Johansson
• [PATCH 1/3] [NET] phy/fixed.c: rework to not duplicate PHY layer functionality   Vitaly Bordug
• [RFC] [PATCH] pasemi: NMI support with MPIC   Benjamin Herrenschmidt
• [RFC] [PATCH] pasemi: NMI support with MPIC   Olof Johansson
• [PATCH 1/3][RESEND] phylib: add PHY interface modes for internal delay for tx and rx only   Jeff Garzik
• [PATCH 1/3] [NET] phy/fixed.c: rework to not duplicate PHY layer functionality   Anton Vorontsov
• [PATCH] SET_NETDEV_DEV() in fec_mpc52xx.c   Jeff Garzik
• [PATCH] Stop phy code from returning success to unknown ioctls.   Jeff Garzik
• [PATCH] [1/12] pasemi_mac: RX/TX ring management cleanup   Jeff Garzik
• [PATCH 1/3] [NET] phy/fixed.c: rework to not duplicate PHY layer functionality   Jeff Garzik
• [PATCH 1/3] [NET] phy/fixed.c: rework to not duplicate PHY layer functionality   Vitaly Bordug
• [PATCH 1/3] [NET] phy/fixed.c: rework to not duplicate PHY layer functionality   Vitaly Bordug
• [PATCH 0/3] OF-platform PATA driver   Jeff Garzik
• [PATCH 1/3] [NET] phy/fixed.c: rework to not duplicate PHY layer functionality   Stephen Rothwell
• [PATCH 0/3] OF-platform PATA driver   Anton Vorontsov
• serial console autodetection not working on powermac   Benjamin Herrenschmidt
• [PATCH 0/3] OF-platform PATA driver   Olof Johansson
• [PATCH 2/3] [libata] pata_of_platform: OF-Platform PATA device driver   Olof Johansson
• [PATCH] gianfar: fix compile warning   Grant Likely
• [PATCH] gianfar driver: eliminate compiler warnings and unnecessary macros   Grant Likely
• [PATCH] Fix buglets in mpc5200 FEC code that are corrupting memory.   Grant Likely
• [PATCH v2 1/2] [POWERPC] Add machine initcall macros   Grant Likely
• [PATCH v2 2/2] [POWERPC] Use new machine_xxx_initcall hooks in platform code   Grant Likely
• [PATCH v2 2/2] [POWERPC] Use new machine_xxx_initcall hooks in platform code   Grant Likely
• CPM2 USB host driver   Mike Rapoport
• [PATCH 09/28] blk_end_request: changing ps3disk (take 3)   Geert Uytterhoeven
• [PATCH 0/3] OF-platform PATA driver   Anton Vorontsov
• [PATCH 1/3] [NET] phy/fixed.c: rework to not duplicate PHYlayer functionality   Joakim Tjernlund
• [PATCH 1/3] [NET] phy/fixed.c: rework to not duplicate PHYlayer functionality   Anton Vorontsov
• [PATCH 24/24] powerpc: Base support for 440SPe "Katmai" eval board   Stefan Roese
• [PATCH 12/24] powerpc: 4xx PLB to PCI Express support   Stefan Roese
• [PATCH 24/24] powerpc: Base support for 440SPe "Katmai" eval board   Stefan Roese
• [PATCH 12/24] powerpc: 4xx PLB to PCI Express support   Josh Boyer
• [PATCH 0/3] OF-platform PATA driver   Olof Johansson
• [BUG] 2.6.24-rc3-mm2 kernel bug on nfs & cifs mounted partitions   Kamalesh Babulal
• [PATCH v2 2/2] [POWERPC] Use new machine_xxx_initcall hooks in platform code   Olof Johansson
• [PATCH 12/24] powerpc: 4xx PLB to PCI Express support   Benjamin Herrenschmidt
• [PATCH 12/24] powerpc: 4xx PLB to PCI Express support   Stefan Roese
• Please pull powerpc.git merge branch   Paul Mackerras
• [PATCH 0/3] OF-platform PATA driver   Arnd Bergmann
• [PATCH 0/3] OF-platform PATA driver   Olof Johansson
• Please pull powerpc.git merge branch   Josh Boyer
• Xilinx EDK BSP generation of device trees for microblaze and PowerPC   David Gibson
• Xilinx EDK BSP generation of device trees for microblaze and PowerPC   David Gibson
• [PATCH 1/5] PowerPC 74xx: Katana Qp device tree   David Gibson
• [PATCH] Add IPIC MSI interrupt support   David Gibson
• [PATCH 2/2] powerpc: make 64K huge pages more reliable   David Gibson
• [PATCH 1/3] [POWERPC] Add docs for Freescale 83xx SATA device tree nodes   Li Yang
• Xilinx EDK BSP generation of device trees for microblaze and PowerPC   Grant Likely
• [PPC BOOT] Create otheros.bld next to specified output file, not in $object directory.   David Woodhouse
• [PPC BOOT] Find device-tree source file in default directory.   David Woodhouse
• [PPC BOOT] Allow for bootwrapper utilities being in different directory to objects   David Woodhouse
• [PPC BOOT] 'make bootwrapper_install'   David Woodhouse
• [PATCH 0/24] powerpc: 4xx PCI, PCI-X and PCI-Express support among others   Benjamin Herrenschmidt
• [PPC BOOT] Create otheros.bld next to specified output file, not in $object directory.   Geoff Levand
• [PATCH] Add MPC837xEMDS PCIE RC mode support   Li Li
• [PATCH] Add IPIC MSI interrupt support   Michael Ellerman
• [PATCH 0/24] powerpc: 4xx PCI, PCI-X and PCI-Express support among others   Grant Likely
• [PATCH 0/24] powerpc: 4xx PCI, PCI-X and PCI-Express support among others   Josh Boyer
• [PATCH 2/4] Use embedded dtc in kernel builds   David Gibson
• [PATCH 3/4] Use embedded libfdt in the bootwrapper   David Gibson
• [PATCH] [POWERPC] pasemi: Fix module information for gpio-mdio   Olof Johansson
• for-2.6.25 branch created in powerpc.git   Paul Mackerras
• [PATCH] [POWERPC] pasemi: Fix module information for gpio-mdio   Paul Mackerras
• [PATCH] [POWERPC] pasemi: Fix module information for gpio-mdio   Olof Johansson
• [PATCH] Add IPIC MSI interrupt support   Li Li
• Please pull pasemi.git for-2.6.25 branch   Olof Johansson
• for-2.6.25 branch created in powerpc.git   Benjamin Herrenschmidt
• [PATCH 14/27] powerpc: ptrace generic resume   Srinivasa Ds
• [PATCH] Add IPIC MSI interrupt support   Li Li
• [PATCH] ipic: change ack operation that register is accessed only when needed   Li Yang
• [PATCH] add MPC837x MDS default kernel configuration   Li Yang
• for-2.6.25 branch created in powerpc.git   Jon Loeliger
• for-2.6.25 branch created in powerpc.git   Josh Boyer
• [PPC BOOT] Find device-tree source file in default directory.   Scott Wood
• [PPC BOOT] Find device-tree source file in default directory.   David Woodhouse
• for-2.6.25 branch created in powerpc.git   Josh Boyer
• [PATCH] Generic RTC class support for ppc_md.[gs]et_rtc_time   David Woodhouse
• [PATCH] [POWERPC] Improved documentation of device tree 'ranges'.   Stephen Neuendorffer
• [PATCH] [POWERPC] Improved documentation of device tree 'ranges'.   Grant Likely
• [PATCH 1/5] PowerPC 74xx: Katana Qp device tree   Jon Loeliger
• [PATCH] powerpc: fix os-term usage on kernel panic   Linas Vepstas
• [PATCH] Generic RTC class support for ppc_md.[gs]et_rtc_time   Benjamin Herrenschmidt
• [PATCH 1/5] PowerPC 74xx: Katana Qp device tree   Benjamin Herrenschmidt
• [PATCH 4/5] PowerPC 74xx: Katana Qp base support   Benjamin Herrenschmidt
• [PATCH] Fix 8xx compile errors   John Tyner
• [PATCH] ipic: change ack operation that register is accessed only when needed   Benjamin Herrenschmidt
• [PATCH] Add IPIC MSI interrupt support   Benjamin Herrenschmidt
• [PATCH] Make QSpan PCI work   John Tyner
• [PATCH] Generic RTC class support for ppc_md.[gs]et_rtc_time   David Woodhouse
• [BUG] 2.6.24-rc3-git2 softlockup detected   Andrew Morton
• [PATCH 0/2] QE clock source improvements   Timur Tabi
• [PATCH 1/2] qe: add function qe_clock_source()   Timur Tabi
• [PATCH 2/2] ucc_geth: use rx-clock-name and tx-clock-name device tree properties   Timur Tabi
• [PATCH 0/4] Series to add device tree naming to i2c   Jon Smirl
• [PATCH 1/4] Implement module aliasing for i2c to translate from device tree names   Jon Smirl
• [PATCH 2/4] Modify several rtc drivers to use the alias names list property of i2c   Jon Smirl
• [PATCH 3/4] Convert PowerPC MPC i2c to of_platform_driver from platform_driver   Jon Smirl
• [PATCH 4/4] Convert pfc8563 i2c driver from old style to new style   Jon Smirl
• [PATCH 2/2] powerpc: make 64K huge pages more reliable   Jon Tollefson
• [PATCH 2/2] powerpc: make 64K huge pages more reliable   Chris Snook
• [PATCH] Generic RTC class support for ppc_md.[gs]et_rtc_time   Benjamin Herrenschmidt
• [PATCH] Generic RTC class support for ppc_md.[gs]et_rtc_time   David Woodhouse
• [PATCH 09/28] blk_end_request: changing ps3disk (take 3)   Kiyoshi Ueda
• [PATCH 0/4] Series to add device tree naming to i2c   Olof Johansson
• [PATCH 0/4] Series to add device tree naming to i2c   Scott Wood
• [PATCH 0/4] Series to add device tree naming to i2c   Jon Smirl
• [PATCH 0/4] Series to add device tree naming to i2c   Olof Johansson
• Please pull pasemi.git for-2.6.25 branch   Olof Johansson
• [PATCH 2/2] powerpc: make 64K huge pages more reliable   David Gibson
• [PATCH 1/5] PowerPC 74xx: Katana Qp device tree   David Gibson
• dtc: Fix uninitialized use of structure_ok   David Gibson
• [PATCH] [POWERPC] Improved documentation of device tree 'ranges'.   David Gibson
• [PATCH] [POWERPC] [v2] Improved documentation of device tree 'ranges'.   Stephen Neuendorffer
• [PATCH 1/5] PowerPC 74xx: Katana Qp device tree   Mark A. Greer
• [PATCH] Add IPIC MSI interrupt support   Li Li
• Merge dtc   David Woodhouse
• [PATCH] ipic: change ack operation that register is accessedonly when needed   Li Yang
• [PATCH 1/5] PowerPC 74xx: Katana Qp device tree   Mark A. Greer
• [PATCH 4/5] PowerPC 74xx: Katana Qp base support   Mark A. Greer
• [PATCH 1/5] PowerPC 74xx: Katana Qp device tree   Benjamin Herrenschmidt
• [PATCH] ipic: change ack operation that register is accessedonly when needed   Benjamin Herrenschmidt
• [PATCH] [POWERPC] [v2] Improved documentation of device tree 'ranges'.   David Gibson
• [PATCH 1/5] PowerPC 74xx: Katana Qp device tree   David Gibson
• iSeries_defconfig update   Stephen Rothwell
• Merge dtc   David Gibson
• [PATCH 2/2] [POWERPC] Use of_register_driver to implement of_register_platform_driver   Stephen Rothwell
• [PATCH] [POWERPC] [v2] Improved documentation of device tree 'ranges'.   Grant Likely
• dtc: Add may const qualifications   David Gibson
• [PATCH 2.6.24] pasemi_mac: Fix reuse of free'd skb   Olof Johansson
• [PATCH] Fix hardware IRQ time accounting problem.   Tony Breeds
• [PATCH] [POWERPC] [v2] Improved documentation of device tree'ranges'.   Stephen Neuendorffer
• [PATCH 1/5] PowerPC 74xx: Katana Qp device tree   Mark A. Greer
• [PATCH 1/5] PowerPC 74xx: Katana Qp device tree   Mark A. Greer
• [RFC 0/7] powerpc: Rework pm_power_off & machine_[restart|power_off|halt]   Mark A. Greer
• [PATCH] Add IPIC MSI interrupt support   Michael Ellerman
• [PATCH 1/7] powerpc: Drivers should call machine_power_off not pm_power_off   Mark A. Greer
• [PATCH 2/7] powerpc: xmon should call machine_xxx not ppc_md.xxx directly   Mark A. Greer
• [PATCH 3/7] powerpc: ras.c should call machine_power_off()   Mark A. Greer
• [PATCH 4/7] powerpc: Rework the machine_[restart|power_off|halt] routines   Mark A. Greer
• [PATCH] powermac: proper sleep management   Paul Mackerras
• [PATCH 5/7] powerpc: Replace ppc_md.power_off with pm_power_off   Mark A. Greer
• [PATCH 6/7] powerpc: Remove redundant power_off and halt routines   Mark A. Greer
• [PATCH 7/7] powerpc: Remove incorrect panic() calls   Mark A. Greer
• [PATCH v2] Fix hardware IRQ time accounting problem.   Tony Breeds
• [PATCH] pci: Fix bus resource assignment on 32 bits with 64b resources   Benjamin Herrenschmidt
• [PATCH 4/7] powerpc: Rework the machine_[restart|power_off|halt] routines   Benjamin Herrenschmidt
• [PATCH 5/7] powerpc: Replace ppc_md.power_off with pm_power_off   Benjamin Herrenschmidt
• [PATCH] ipic: change ack operation that register isaccessedonly when needed   Li Yang
• [PATCH] ipic: change ack operation that register isaccessedonly when needed   Benjamin Herrenschmidt
• [PATCH] Add IPIC MSI interrupt support   Benjamin Herrenschmidt
• [PATCH 1/3] cell: fix undefined reference to mmio_nvram_init   Ishizaki Kou
• [PATCH 2/3] celleb: add supporting for native CBE   Ishizaki Kou
• [PATCH 3/3] update celleb_defconfig to support for native CBE   Ishizaki Kou
• [PATCH] Add IPIC MSI interrupt support   Li Li
• [PATCH] Add IPIC MSI interrupt support   Li Tony
• [PATCH 1/2] powerpc: Add MPC837xE MDS PCIE RC mode support   Li Li
• [PATCH 2/2] powerpc: Add IPIC MSI support   Li Li
• [PATCH 2/2] powerpc: Add IPIC MSI support   Li Yang
• [PATCH] ipic: ack only for edge interrupts   Li Yang
• [PATCH 2/2] powerpc: Add IPIC MSI support   Michael Ellerman
• [PATCH] Add IPIC MSI interrupt support   Michael Ellerman
• [BUG] 2.6.24-rc3-git2 softlockup detected   Ingo Molnar
• [PATCH v2 2/2] [POWERPC] Use new machine_xxx_initcall hooks in platform code   Geert Uytterhoeven
• [PATCH] pci: Fix bus resource assignment on 32 bits with 64b resources   Geert Uytterhoeven
• [PATCH 1/3] cell: fix undefined reference to mmio_nvram_init   Arnd Bergmann
• [PATCH] Add IPIC MSI interrupt support   Scott Wood
• [PATCH 1/5] PowerPC 74xx: Katana Qp device tree   Jon Loeliger
• [PATCH 2/3] celleb: add supporting for native CBE   Arnd Bergmann
• Merge dtc   Jon Loeliger
• [PATCH][DTC] Add an option to pad the blob that is generated   Jon Loeliger
• dtc: Fix uninitialized use of structure_ok   Jon Loeliger
• [PATCH 2/2] [POWERPC] pasemi: Register i2c_board_info   David Woodhouse
• [PATCH v2 2/2] [POWERPC] Use new machine_xxx_initcall hooks in platform code   Grant Likely
• [PATCH v2 2/2] [POWERPC] Use new machine_xxx_initcall hooks in platform code   Geert Uytterhoeven
• dtc: Add may const qualifications   Jon Loeliger
• [PATCH v2 2/2] [POWERPC] Use new machine_xxx_initcall hooks in platform code   Grant Likely
• [BUG] 2.6.24-rc3-git2 softlockup detected   Kamalesh Babulal
• Merge dtc   Josh Boyer
• [PATCH] lparcfg: remove useless buffer allocation   Nathan Lynch
• Merge dtc   Kumar Gala
• Merge dtc   Scott Wood
• [FDT][PATCH] Fix padding options   Kumar Gala
• [FDT][PATCH] Print out the total size as part of ftdump   Kumar Gala
• [PATCH v2] Fix hardware IRQ time accounting problem.   Johannes Berg
• [PATCH v2 0/4] OF-platform PATA driver   Anton Vorontsov
• [PATCH v2 1/4] [libata] pata_platform: make probe and remove functions device type neutral   Anton Vorontsov
• [PATCH v2 2/4] [libata] pata_of_platform: OF-Platform PATA device driver   Anton Vorontsov
• [PATCH v2 3/4] [POWERPC] MPC8349E-mITX: introduce localbus and pata nodes   Anton Vorontsov
• [PATCH v2 4/4] [libata] pata_platform: s/ioport_shift/reg_shift/g   Anton Vorontsov
• [PATCH v2 4/4] [libata] pata_platform: s/ioport_shift/reg_shift/g   Sergei Shtylyov
• Merge dtc   David Woodhouse
• [PATCH 1/5] PowerPC 74xx: Katana Qp device tree   Andrei Dolnikov
• [PATCH 1/5] PowerPC 74xx: Katana Qp device tree   Mark A. Greer
• ucc_uart: add support for Freescale QUICCEngine UART   Timur Tabi
• [PATCH 5/7] powerpc: Replace ppc_md.power_off with pm_power_off   Mark A. Greer
• [PATCH 2.6.24] pasemi_mac: Fix reuse of free'd skb   David Woodhouse
• [PATCH 2.6.24] pasemi_mac: Fix reuse of free'd skb   David Woodhouse
• [PATCH v2 2/4] [libata] pata_of_platform: OF-Platform PATA device driver   Olof Johansson
• 2.6.25-candidates branch updated in 4xx tree   Josh Boyer
• [PATCH v2 3/4] [POWERPC] MPC8349E-mITX: introduce localbus and pata nodes   Olof Johansson
• [PATCH v2 3/4] [POWERPC] MPC8349E-mITX: introduce localbus and pata nodes   Scott Wood
• [PATCH 2/2] [POWERPC] pasemi: Register i2c_board_info   Olof Johansson
• [PATCH v2 2/2] [POWERPC] Use new machine_xxx_initcall hooks in platform code   Arnd Bergmann
• [PATCH v2 3/4] [POWERPC] MPC8349E-mITX: introduce localbus and pata nodes   Anton Vorontsov
• [PATCH v2 2/4] [libata] pata_of_platform: OF-Platform PATA device driver   Anton Vorontsov
• [PATCH 2.6.24] pasemi_mac: Fix reuse of free'd skb   Jeff Garzik
• [PATCH 5/7] powerpc: Replace ppc_md.power_off with pm_power_off   Benjamin Herrenschmidt
• [PATCH] pci: Fix bus resource assignment on 32 bits with 64b resources   Benjamin Herrenschmidt
• [PATCH] Stop phy code from returning success to unknown ioctls.   Andy Fleming
• [PATCH v2 2/4] [libata] pata_of_platform: OF-Platform PATA device driver   Olof Johansson
• [PATCH 5/7] powerpc: Replace ppc_md.power_off with pm_power_off   Grant Likely
• [PATCH] gianfar: fix compile warning   Jeff Garzik
• [PATCH 1/3] [NET] phy/fixed.c: rework to not duplicate PHY layer functionality   Jeff Garzik
• [PATCH] gianfar driver: eliminate compiler warnings and unnecessary macros   Jeff Garzik
• [PATCH 5/7] powerpc: Replace ppc_md.power_off with pm_power_off   Benjamin Herrenschmidt
• [PATCH v2 2/2] [POWERPC] Use new machine_xxx_initcall hooks in platform code   Benjamin Herrenschmidt
• [PATCH v2 2/4] [libata] pata_of_platform: OF-Platform PATA device driver   Anton Vorontsov
• [PATCH v2 2/4] [libata] pata_of_platform: OF-Platform PATA device driver   Olof Johansson
• [PATCH v2 3/4] [POWERPC] MPC8349E-mITX: introduce localbus and pata nodes   Olof Johansson
• [PATCH v2 1/4] [libata] pata_platform: make probe and remove functions device type neutral   Olof Johansson
• [PATCH] pata_of_platform: Move electra-ide support over to new framework   Olof Johansson
• [PATCH] [POWERPC] Xilinx: clear data caches.   Stephen Neuendorffer
• [PATCH] pata_of_platform: Move electra-ide support over to new framework   Jeff Garzik
• [BUG] 2.6.24-rc3-git2 softlockup detected   Ingo Molnar
• [PATCH] [POWERPC] Xilinx: clear data caches.   Grant Likely
• [PATCH v2 2/2] [POWERPC] Use new machine_xxx_initcall hooks in platform code   Geoff Levand
• [PATCH] pata_of_platform: Move electra-ide support over to new framework   Olof Johansson
• [PATCH v2 2/2] [POWERPC] Use new machine_xxx_initcall hooks in platform code   Arnd Bergmann
• [FDT][PATCH] Fix padding options   David Gibson
• [PATCH v2 2/2] [POWERPC] Use new machine_xxx_initcall hooks in platform code   Arnd Bergmann
• Merge dtc   David Gibson
• ucc_uart: add support for Freescale QUICCEngine UART   Arnd Bergmann
• [FDT][PATCH] Fix padding options   Kumar Gala
• [FDT][PATCH] Print out the total size as part of ftdump   David Gibson
• [PATCH v2] Fix hardware IRQ time accounting problem.   Jörg Sommer
• Merge dtc   Paul Mackerras
• ucc_uart: add support for Freescale QUICCEngine UART   Timur Tabi
• Merge dtc   David Woodhouse
• Merge dtc   Josh Boyer
• dtc: Fix FAIL() macro varargs   David Gibson
• ucc_uart: add support for Freescale QUICCEngine UART   Timur Tabi
• dtc: Convert "name" property checking to new infrastructure   David Gibson
• dtc: Trivial lexer cleanups   David Gibson
• ucc_uart: add support for Freescale QUICCEngine UART   Arnd Bergmann
• dtc: Generate useful error message for properties after subnodes   David Gibson
• ucc_uart: add support for Freescale QUICCEngine UART   Scott Wood
• [FDT][PATCH] Fix padding options   Kumar Gala
• [FDT][PATCH] Print out the total size as part of ftdump   Kumar Gala
• ucc_uart: add support for Freescale QUICCEngine UART   Arnd Bergmann
• dtc: Implement path references   David Gibson
• ucc_uart: add support for Freescale QUICCEngine UART   Scott Wood
• Fix Firmware class name collision   Timur Tabi
• ucc_uart: add support for Freescale QUICCEngine UART   Timur Tabi
• Fix Firmware class name collision   Scott Wood
• ucc_uart: add support for Freescale QUICCEngine UART   Arnd Bergmann
• [PATCH] [XILINX][HWICAP] Xilinx Internal Configuration Access Port device driver.   Stephen Neuendorffer
• [PATCH] [XILINX][HWICAP] Xilinx Internal Configuration Access Port device driver.   Grant Likely
• [PATCH 5/7] powerpc: Replace ppc_md.power_off with pm_power_off   Mark A. Greer
• [PATCH 1/11] ibm_newemac: Add BCM5248 and Marvell 88E1111 PHY support   Benjamin Herrenschmidt
• [PATCH 2/11] ibm_newemac: Add ET1011c PHY support   Benjamin Herrenschmidt
• [PATCH 3/11] ibm_newemac: Fix ZMII refcounting bug   Benjamin Herrenschmidt
• [PATCH 4/11] ibm_newemac: Workaround reset timeout when no link   Benjamin Herrenschmidt
• [PATCH 5/11] ibm_newemac: Cleanup/Fix RGMII MDIO support detection   Benjamin Herrenschmidt
• [PATCH 6/11] ibm_newemac: Cleanup/fix support for STACR register variants   Benjamin Herrenschmidt
• [PATCH 7/11] ibm_newemac: Skip EMACs that are marked unused by the firmware   Benjamin Herrenschmidt
• [PATCH 8/11] ibm_newemac: Correct opb_bus_freq value   Benjamin Herrenschmidt
• [PATCH 9/11] ibm_newemac: Fix typo reading TAH channel info   Benjamin Herrenschmidt
• [PATCH 10/11] ibm_newemac: Call dev_set_drvdata() before tah_reset()   Benjamin Herrenschmidt
• [PATCH 11/11] ibm_newemac: Update file headers copyright notices   Benjamin Herrenschmidt
• [PATCH 2/2] [POWERPC] pasemi: Register i2c_board_info   Paul Mackerras
• [PATCH v2 2/4] [libata] pata_of_platform: OF-Platform PATA device driver   Paul Mundt
• [RFC/PATCH 0/6] powerpc: 32 bits PCI updates   Benjamin Herrenschmidt
• [RFC/PATCH 1/6] powerpc: pci32: remove bogus alignment message   Benjamin Herrenschmidt
• [RFC/PATCH 2/6] powerpc: pci32: use generic pci_assign_unassign_resources   Benjamin Herrenschmidt
• [RFC/PATCH 3/6] powerpc: pci32: Remove PowerMac P2P bridge IO hack   Benjamin Herrenschmidt
• [RFC/PATCH 4/6] powerpc: pci32: Add flags modifying the PCI code behaviour   Benjamin Herrenschmidt
• [RFC/PATCH 5/6] powerpc: pci32: Remove obsolete PowerMac bus number hack   Benjamin Herrenschmidt
• [RFC/PATCH 6/6] powerpc: pci32: 4xx embedded platforms want to reassign all PCI resources   Benjamin Herrenschmidt
• Merge dtc   David Woodhouse
• [PATCH v2 4/4] [libata] pata_platform: s/ioport_shift/reg_shift/g   Paul Mundt
• ucc_uart: add support for Freescale QUICCEngine UART   Vitaly Bordug
• [PATCH] Fix 8xx compile errors   Vitaly Bordug
• Merge dtc   Paul Mackerras
• [PATCH] Make QSpan PCI work   Vitaly Bordug
• [PATCH 1/3] [NET] phy/fixed.c: rework to not duplicate PHY layer functionality   Vitaly Bordug
• Fix Firmware class name collision   Timur Tabi
• Merge dtc   Josh Boyer
• [PATCH 2/2] [POWERPC] pasemi: Register i2c_board_info   Olof Johansson
• Merge dtc   Paul Mackerras
• Merge dtc   Josh Boyer
• [PATCH] pci: Fix bus resource assignment on 32 bits with 64b resources   Benjamin Herrenschmidt
• [PATCH v2 2/4] [libata] pata_of_platform: OF-Platform PATA device driver   Olof Johansson
• [PATCH 7/11] ibm_newemac: Skip EMACs that are marked unused by the firmware   David Gibson
• Merge dtc   Josh Boyer
• [PATCH 7/11] ibm_newemac: Skip EMACs that are marked unused by the firmware   Benjamin Herrenschmidt
• [PATCH 7/11] ibm_newemac: Skip EMACs that are marked unused by the firmware   David Gibson
• [PATCH 7/11] ibm_newemac: Skip EMACs that are marked unused by the firmware   Benjamin Herrenschmidt
• Merge dtc   Olof Johansson
• [PATCH] pci: Fix bus resource assignment on 32 bits with 64b resources   Benjamin Herrenschmidt
• PS3: Update ps3_defconfig   Geoff Levand
• [PATCH 1/7] Set archdata.dma_data for direct DMA in cell_dma_dev_setup()   Michael Ellerman
• [PATCH 2/7] Add celleb_dma_dev_setup()   Michael Ellerman
• [PATCH 3/7] Use archdata.dma_data in dma_direct_ops   Michael Ellerman
• [PATCH 4/7] Have cell use its own dma_direct_offset variable   Michael Ellerman
• [PATCH 5/7] Have celleb use its own dma_direct_offset variable   Michael Ellerman
• [PATCH 6/7] Remove the global dma_direct_offset   Michael Ellerman
• [PATCH 7/7] Remove bogus comment in dma_direct_alloc_coherent()   Michael Ellerman
• Regarding MPC8641D   sivaji
• drivers/net/iseries_veth.c dubious sysfs usage   Greg KH
• [PATCH] add MPC837x MDS board default device tree   Li Yang
• drivers/net/iseries_veth.c dubious sysfs usage   Michael Ellerman
• [PATCH v2] Fix hardware IRQ time accounting problem.   Frederik Himpe
• [PATCH] [XILINX][HWICAP] Xilinx Internal Configuration Access Port device driver.   Peter Korsgaard
• [FDT][PATCH] Print out the total size as part of ftdump   Jon Loeliger
• dtc: Fix FAIL() macro varargs   Jon Loeliger
• dtc: Convert "name" property checking to new infrastructure   Jon Loeliger
• dtc: Trivial lexer cleanups   Jon Loeliger
• dtc: Generate useful error message for properties after subnodes   Jon Loeliger
• [FDT][PATCH] Fix padding options   Jon Loeliger
• dtc: Implement path references   Jon Loeliger
• [PATCH v2 1/4] [libata] pata_platform: make probe and remove functions device type neutral   Anton Vorontsov
• ucc_uart: add support for Freescale QUICCEngine UART   Timur Tabi
• Regarding MPC8641D   Christopher Fester
• [PATCH] Add aliases node to 8641hpcn DTS file.   Jon Loeliger
• [PATCH] Add aliases node to 8641hpcn DTS file.   Grant Likely
• [PATCH v2] [POWERPC] Optimize counting distinct entries in the relocation sections   Medve Emilian
• [PATCH] Add aliases node to 8641hpcn DTS file.   Jon Loeliger
• [PATCH] Add aliases node to 8641hpcn DTS file.   Vitaly Bordug
• [PATCH] Add aliases node to 8641hpcn DTS file.   Grant Likely
• [PATCH] Add aliases node to 8641hpcn DTS file.   Josh Boyer
• [PATCH v2 2/4] [libata] pata_of_platform: OF-Platform PATA device driver   Scott Wood
• drivers/net/iseries_veth.c dubious sysfs usage   Greg KH
• [PATCH] Add aliases node to 8641hpcn DTS file.   Mark A. Greer
• [PATCH] Add aliases node to 8641hpcn DTS file.   David Gibson
• dtc: RFC: Fix some lexical problems with references   Josh Boyer
• [PATCH v2] qe: add ability to upload QE firmware   Timur Tabi
• dtc: RFC: Fix some lexical problems with references   Josh Boyer
• [PATCH v2] qe: add ability to upload QE firmware   Arnd Bergmann
• [PATCH v2] qe: add ability to upload QE firmware   Timur Tabi
• [patch] Windfarm plateform module for PowerMac12,1   Étienne Bersac
• [PATCH 1/7] Set archdata.dma_data for direct DMA in cell_dma_dev_setup()   Arnd Bergmann
• [PATCH 2/7] Add celleb_dma_dev_setup()   Arnd Bergmann
• [PATCH 3/7] Use archdata.dma_data in dma_direct_ops   Arnd Bergmann
• [PATCH 4/7] Have cell use its own dma_direct_offset variable   Arnd Bergmann
• [PATCH 5/7] Have celleb use its own dma_direct_offset variable   Arnd Bergmann
• [PATCH 6/7] Remove the global dma_direct_offset   Arnd Bergmann
• [PATCH 7/7] Remove bogus comment in dma_direct_alloc_coherent()   Arnd Bergmann
• [PATCH v2] qe: add ability to upload QE firmware   Arnd Bergmann
• kernel_thread pid - stuck (after VFS: Mounted root (ext2 filesystem).)   Siva Prasad
• [PATCH v2] qe: add ability to upload QE firmware   Timur Tabi
• [PATCH v2] qe: add ability to upload QE firmware   Arnd Bergmann
• [patch] Windfarm plateform module for PowerMac12,1   Étienne Bersac
• Regarding MPC8641D   sivaji
• Regarding MPC8641D   Siva Prasad
• Regarding MPC8641D   Siva Prasad
• [PATCH] windfarm: add PowerMac 12,1 support   Étienne Bersac
• Regarding MPC8641D   sivaji
• Link up/down messages from 5200 ethernet driver   Jon Smirl
• dtc: Remove space from flex command line   David Gibson
• [PATCH 1/2] [POWERPC] iommu_free_table doesn't need the device_node   Stephen Rothwell
• [PATCH 2/2] [POWERPC] pSeries: remove dependency on pci_dn bussubno   Stephen Rothwell
• [PATCH] pci: Fix bus resource assignment on 32 bits with 64b resources   Benjamin Herrenschmidt
• [PATCH] Use SLB size from the device tree   Paul Mackerras
• drivers/net/iseries_veth.c dubious sysfs usage   Michael Ellerman
• Link up/down messages from 5200 ethernet driver   Grant Likely
• Link up/down messages from 5200 ethernet driver   Jon Smirl
• Link up/down messages from 5200 ethernet driver   Jon Smirl
• dtc: More detailed testing of tree checks   David Gibson
• dtc: Migrate "one cell" checks to new framework   David Gibson
• dtc: Migrate "string property" checks to new framework   David Gibson
• dtc: Remove obsolete check_properties() function   David Gibson
• Link up/down messages from 5200 ethernet driver   Grant Likely
• Link up/down messages from 5200 ethernet driver   Jon Smirl
• [PATCH] Use SLB size from the device tree   Michael Neuling
• [PATCH 1/3] cell: fix undefined reference to mmio_nvram_init   Ishizaki Kou
• [PATCH] pci: Fix bus resource assignment on 32 bits with 64b resources   Greg KH
• [PATCH 2/3] celleb: add supporting for native CBE   Ishizaki Kou
• Powerpc PCI cleanups (mainly iSeries)   Stephen Rothwell
• [PATCH 01/19] [POWERPC] clean up pci-bridge.h   Stephen Rothwell
• [PATCH 02/19] [POWERPC] consolidate pci_controller   Stephen Rothwell
• [PATCH] pci: Fix bus resource assignment on 32 bits with 64b resources   Benjamin Herrenschmidt
• [PATCH 0/25] powerpc: 4xx PCI, PCI-X and PCI-Express support among others   Benjamin Herrenschmidt
• [PATCH 1/25] powerpc: Make isa_mem_base common to 32 and 64 bits   Benjamin Herrenschmidt
• [PATCH 2/25] powerpc: Merge pci_process_bridge_OF_ranges()   Benjamin Herrenschmidt
• [PATCH 3/25] powerpc: Fix powerpc 32 bits resource fixup for 64 bits resources   Benjamin Herrenschmidt
• [PATCH 4/25] powerpc: Reworking machine check handling and Fix 440/440A   Benjamin Herrenschmidt
• [PATCH 5/25] powerpc: Add xmon function to dump 44x TLB   Benjamin Herrenschmidt
• [PATCH 6/25] powerpc: Change 32 bits PCI message about resource allocation   Benjamin Herrenschmidt
• [PATCH 7/25] powerpc: Add of_translate_dma_address   Benjamin Herrenschmidt
• [PATCH 8/25] powerpc: Improve support for 4xx indirect DCRs   Benjamin Herrenschmidt
• [PATCH 9/25] powerpc: 4xx PLB to PCI-X support   Benjamin Herrenschmidt
• [PATCH 10/25] powerpc: 4xx PLB to PCI 2.x support   Benjamin Herrenschmidt
• [PATCH 11/25] powerpc: 4xx PLB to PCI Express support   Benjamin Herrenschmidt
• [PATCH 12/25] powerpc: PCI support for 4xx Ebony board   Benjamin Herrenschmidt
• [PATCH 13/25] powerpc: Remove useless volatiles in udbg_16550.c   Benjamin Herrenschmidt
• [PATCH 14/25] powerpc: Add early udbg support for 40x processors   Benjamin Herrenschmidt
• [PATCH 15/25] powerpc: early debug forces console log level to max   Benjamin Herrenschmidt
• [PATCH 16/25] powerpc: EP405 boards support for arch/powerpc   Benjamin Herrenschmidt
• [PATCH 17/25] powerpc: Add PCI to Walnut platform   Benjamin Herrenschmidt
• [PATCH 18/25] powerpc: Base support for 440GX Taishan eval board   Benjamin Herrenschmidt
• [PATCH 19/25] powerpc: Wire up PCI on Bamboo board   Benjamin Herrenschmidt
• [PATCH 20/25] powerpc: Wire up 440EP USB controlle support to Bamboo board   Benjamin Herrenschmidt
• [PATCH 21/25] powerpc: Adds decoding of 440SPE memory size to boot wrapper library   Benjamin Herrenschmidt
• [PATCH 22/25] powerpc: Add mfspr/mtspr inline macros to 4xx bootwrapper   Benjamin Herrenschmidt
• [PATCH 23/25] powerpc: Rework 4xx clock probing in boot wrapper   Benjamin Herrenschmidt
• [PATCH 24/25] powerpc: Base support for 440SPe "Katmai" eval board   Benjamin Herrenschmidt
• [PATCH 25/25] powerpc: 4xx PCI-E Link setup improvements   Benjamin Herrenschmidt
• [RFC/PATCH 0/10] powerpc: PCI updates & merges   Benjamin Herrenschmidt
• [RFC/PATCH 1/10] powerpc: pci32: remove bogus alignment message   Benjamin Herrenschmidt
• [RFC/PATCH 2/10] powerpc: pci32: use generic pci_assign_unassign_resources   Benjamin Herrenschmidt
• [RFC/PATCH 3/10] powerpc: pci32: Remove PowerMac P2P bridge IO hack   Benjamin Herrenschmidt
• [RFC/PATCH 4/10] powerpc: pci32: Add flags modifying the PCI code behaviour   Benjamin Herrenschmidt
• [RFC/PATCH 5/10] powerpc: pci32: Remove obsolete PowerMac bus number hack   Benjamin Herrenschmidt
• [RFC/PATCH 6/10] powerpc: pci32: Add platform option to enable /proc PCI domains   Benjamin Herrenschmidt
• [RFC/PATCH 7/10] powerpc: Merge pcibios_resource_to_bus/bus_to_resource   Benjamin Herrenschmidt
• [RFC/PATCH 8/10] powerpc: Merge PCI resource fixups   Benjamin Herrenschmidt
• [RFC/PATCH 9/10] powerpc: Merge PCI resource allocation & assignment   Benjamin Herrenschmidt
• [RFC/PATCH 10/10] powerpc: Clear pci_probe_only on 64 bits PowerMac   Benjamin Herrenschmidt
• [PATCH] pci: Fix bus resource assignment on 32 bits with 64b resources   Geert Uytterhoeven
• [PATCH] pci: Fix bus resource assignment on 32 bits with 64b resources   Matthew Wilcox
• [PATCH 11/25] powerpc: 4xx PLB to PCI Express support   Stefan Roese
• [PATCH 1/3] POWERPC: don't cast a pointer to pointer of list_head   Li Zefan
• [PATCH 24/25] powerpc: Base support for 440SPe "Katmai" eval board   Stefan Roese
• [PATCH] [POWERPC] 4xx: Add Katmai defconfig   Stefan Roese
• [PATCH 2/3] celleb: add supporting for native CBE   Arnd Bergmann
• [RFC/PATCH 8/10] powerpc: Merge PCI resource fixups   Stephen Rothwell
• Please pull powerpc.git merge branch   Paul Mackerras
• [PATCH] pci: Fix bus resource assignment on 32 bits with 64b resources   Kumar Gala
• [PATCH 0/25] powerpc: 4xx PCI, PCI-X and PCI-Express support among others   Josh Boyer
• [PATCH] pci: Fix bus resource assignment on 32 bits with 64b resources   Andreas Schwab
• [PATCH] PowerPC 4xx: rework UIC cascade irq handling   Valentine Barshak
• [PATCH 03/19] [POWERPC] iSeries: move find_Device_Node to avoid a forward declaration   Stephen Rothwell
• [PATCH 04/19] [POWERPC] iSeries: cleanup PCI retry code a little   Stephen Rothwell
• [PATCH 05/19] [POWERPC] iSeries: deCamelCase pci.c   Stephen Rothwell
• [PATCH 06/19] [POWERPC] iSeries: remove some dead code from pci.c   Stephen Rothwell
• [PATCH 07/19] [POWERPC] iSeries: unindent and clean iSeries_pci_final_fixup   Stephen Rothwell
• [PATCH 08/19] [POWERPC] iSeries: consoldiate PCI IO error check   Stephen Rothwell
• [PATCH 09/19] [POWERPC] iSeries: remove one layer of IO routines   Stephen Rothwell
• [PATCH 10/19] [POWERPC] iSeries: remove pci_dn dependency from iSeries_Device_Information   Stephen Rothwell
• [PATCH 11/19] [POWERPC] iSeries: iseries_ds_addr is only used in pci.c   Stephen Rothwell
• [PATCH 12/19] [POWERPC] iSeries: reduce dependence on pci_dn bussubno   Stephen Rothwell
• [PATCH 13/19] [POWERPC] iSeries: make pcibios_final_fixup not depend on pci_dn   Stephen Rothwell
• [PATCH 14/19] [POWERPC] Inline pci_setup_pci_controller as it has become trivial   Stephen Rothwell
• [PATCH 15/19] [POWERPC] iSeries: call iSeries_pcibios_init from setup_arch   Stephen Rothwell
• [PATCH 16/19] [POWERPC] iSeries: hose->buid is always zero for iSeries   Stephen Rothwell
• [PATCH 17/19] [POWERPC] remove some iSeries platform checks from the PCI code   Stephen Rothwell
• [PATCH v2] qe: add ability to upload QE firmware   Timur Tabi
• [PATCH 18/19] [POWERPC] Don't special case pci_domain_nr() for iSeries   Stephen Rothwell
• [PATCH 19/19] [POWERPC] pci_controller->arch_data really is a struct device_node *   Stephen Rothwell
• [PATCH] IB/ehca: Serialize HCA-related hCalls on POWER5   Joachim Fenkes
• Powerpc PCI cleanups (mainly iSeries)   Stephen Rothwell
• Are the MPC85xx DMA drivers already in a tree?   Clemens Koller
• dtc: Remove space from flex command line   Jon Loeliger
• dtc: More detailed testing of tree checks   Jon Loeliger
• dtc: Migrate "one cell" checks to new framework   Jon Loeliger
• dtc: Migrate "string property" checks to new framework   Jon Loeliger
• dtc: Remove obsolete check_properties() function   Jon Loeliger
• [PATCH] windfarm: add PowerMac 12,1 support   Étienne Bersac
• [PATCH v2] qe: add ability to upload QE firmware   Arnd Bergmann
• Powerpc PCI cleanups (mainly iSeries)   Josh Boyer
• [PATCH v2] qe: add ability to upload QE firmware   Timur Tabi
• [PATCH] IB/ehca: Serialize HCA-related hCalls on POWER5   Arnd Bergmann
• [PATCH v2] qe: add ability to upload QE firmware   Arnd Bergmann
• [PATCH v2] qe: add ability to upload QE firmware   Timur Tabi
• [PATCH v2] qe: add ability to upload QE firmware   Kumar Gala
• [PATCH v2] qe: add ability to upload QE firmware   Timur Tabi
• [PATCH 1/2] usb: Remove broken optimisation in OHCI IRQ handler   David Brownell
• [PATCH 19/19] [POWERPC] pci_controller->arch_data really is a struct device_node *   Jon Loeliger
• [RFC/PATCH 5/10] powerpc: pci32: Remove obsolete PowerMac bus number hack   Jon Loeliger
• ucc_geth 10 Mbit/s locks up CPU even though NAPI is enabled   Joakim Tjernlund
• [PATCH v2] qe: add ability to upload QE firmware   Timur Tabi
• [PATCH v3] qe: add ability to upload QE firmware   Timur Tabi
• Linuxppc-dev Digest, Vol 40, Issue 57   Siva Prasad
• Regarding MPC8641D   Siva Prasad
• [PATCH] IB/ehca: Serialize HCA-related hCalls on POWER5   Roland Dreier
• [PATCH 07/19] [POWERPC] iSeries: unindent and clean iSeries_pci_final_fixup   Olof Johansson
• [PATCH] [POWERPC] Fix swapper_pg_dir size when CONFIG_PTE_64BIT=y on FSL_BOOKE   Kumar Gala
• Please pull from 'for-2.6.24' branch   Kumar Gala
• Are the MPC85xx DMA drivers already in a tree?   Clemens Koller
• [PATCH] [PPC] virtex bug fix: Use canonical value for AC97 interrupt xparams   Grant Likely
• [PATCH] [PPC] virtex bug fix: Use canonical value for AC97 interrupt xparams   Josh Boyer
• [PATCH 18/25] powerpc: Base support for 440GX Taishan eval board   Josh Boyer
• [PATCH 0/25] powerpc: 4xx PCI, PCI-X and PCI-Express support among others   Josh Boyer
• 2.6.25-candidates branch updated in 4xx tree   Josh Boyer
• [PATCH v3] update xmon slb code.   Will Schmidt
• [PATCH 1/2] usb: Remove broken optimisation in OHCI IRQ handler   David Brownell
• [PATCH 2/2] usb: Remove OHCI useless masking/unmasking of WDH interrupt   David Brownell
• MPC85xx DMA drivers, first testing results.   Clemens Koller
• [PATCH 11/25] powerpc: 4xx PLB to PCI Express support   Benjamin Herrenschmidt
• [PATCH] [POWERPC] 4xx: Add 405GPr and 405EP support in boot wrapper   Matthias Fuchs
• [PATCH] pci: Fix bus resource assignment on 32 bits with 64b resources   Benjamin Herrenschmidt
• [PATCH 1/3] [NET] phy/fixed.c: rework to not duplicate PHY layer functionality   Vitaly Bordug
• [PATCH 2/3] [POWERPC] fsl_soc: add support for gianfar for fixed-link property   Vitaly Bordug
• [PATCH 3/3] [POWERPC] MPC8349E-mITX: Vitesse 7385 PHY is not connected to the MDIO bus   Vitaly Bordug
• [PATCH 1/5] PowerPC 74xx: Katana Qp device tree   Mark A. Greer
• [PATCH] pci: Fix bus resource assignment on 32 bits with 64b resources   Greg KH
• Please pull powerpc.git merge branch   Paul Mackerras
• MPC85xx DMA drivers, first testing results.   Timur Tabi
• [PATCH] add MPC837x MDS board default device tree   David Gibson
• [PATCH 8/25] powerpc: Improve support for 4xx indirect DCRs   Josh Boyer
• [PATCH 16/25] powerpc: EP405 boards support for arch/powerpc   Josh Boyer
• dtc: Convert #address-cells and #size-cells related checks   David Gibson
• dtc: Convert check for obsolete /chosen property   David Gibson
• [PATCH 18/25] powerpc: Base support for 440GX Taishan eval board   Josh Boyer
• [PATCH 19/25] powerpc: Wire up PCI on Bamboo board   Josh Boyer
• [PATCH 21/25] powerpc: Adds decoding of 440SPE memory size to boot wrapper library   Josh Boyer
• [PATCH 23/25] powerpc: Rework 4xx clock probing in boot wrapper   Josh Boyer
• dtc: Reinstate full old-style reference-to-path for v0 dts files   David Gibson
• dtc: Reinstate full old-style reference-to-path for v0 dts files   Josh Boyer
• [PATCH 1/3] POWERPC: don't cast a pointer to pointer of list_head   Nick Piggin
• dtc: Reinstate full old-style reference-to-path for v0 dts files   David Gibson
• dtc: Make dtc-checfails.sh script catch deaths-by-signal   David Gibson
• [PATCH 1/3] POWERPC: don't cast a pointer to pointer of list_head   Li Zefan
• [PATCH 1/3] [POWERPC] iSeries: DeCamelCase vpdinfo.c   Stephen Rothwell
• [PATCH 2/3] [POWERPC] iSeries: clean up and simplify vdpinfo.c   Stephen Rothwell
• [PATCH 3/3] [POWERPC] iSeries: merge vpdinfo.c intp pci.c   Stephen Rothwell
• [RFC][POWERPC] Provide a way to protect 4k subpages when using 64k pages   Paul Mackerras
• [PATCH] [POWERPC] eeh: avoid a possible NULL pointer dereference   Stephen Rothwell
• [PATCH 11/25] powerpc: 4xx PLB to PCI Express support   Stefan Roese
• dtc: Allow gcc format warnings for check_msg()   David Gibson
• dtc: Fix silly typo in dtc-checkfails.sh   David Gibson
• [PATCH] [POWERPC] Fix swapper_pg_dir size when CONFIG_PTE_64BIT=y on FSL_BOOKE   Cedric Hombourger
• [PATCH 1/3] [POWERPC] 4xx: Add Kilauea PCIe support to dts and Kconfig   Stefan Roese
• [PATCH 2/3] [POWERPC] 4xx: Set ibpre for 405EX in 4xx PCIe driver   Stefan Roese
• [PATCH 3/3] [POWERPC] 4xx: Enable PCIe support in the Kilauea defconfig file   Stefan Roese
• [PATCH] IB/ehca: Serialize HCA-related hCalls on POWER5   Arnd Bergmann
• [RFC/PATCH 0/10] powerpc: PCI updates & merges   Stefan Roese
• [RFC][POWERPC] Provide a way to protect 4k subpages when using 64k pages   Arnd Bergmann
• [PATCH v4] qe: add ability to upload QE firmware   Timur Tabi
• [PATCH v5] qe: add ability to upload QE firmware   Timur Tabi
• [PATCH] IB/ehca: Serialize HCA-related hCalls on POWER5   Joachim Fenkes
• [PATCH v2] ucc_uart: add support for Freescale QUICCEngine UART   Timur Tabi
• [DTC][PATCH] Fix cross-compile building   Kumar Gala
• [PATCH 1/11] ibm_newemac: Add BCM5248 and Marvell 88E1111 PHY support   Jeff Garzik
• [PATCH] Fake NUMA emulation for PowerPC   Balbir Singh
• [PATCH] Fake NUMA emulation for PowerPC   Olof Johansson
• [PATCH] Fake NUMA emulation for PowerPC   Geert Uytterhoeven
• [PATCH] Fake NUMA emulation for PowerPC   Balbir Singh
• [PATCH] Fake NUMA emulation for PowerPC   Balbir Singh
• [PATCH] Fake NUMA emulation for PowerPC   Balbir Singh
• [PATCH] Fake NUMA emulation for PowerPC   Kumar Gala
• [PATCH] Fake NUMA emulation for PowerPC   Arnd Bergmann
• [PATCH] Fake NUMA emulation for PowerPC   Arnd Bergmann
• [PATCH] Fake NUMA emulation for PowerPC   Balbir Singh
• [PATCH] Fake NUMA emulation for PowerPC   Balbir Singh
• [PATCH] Fake NUMA emulation for PowerPC   Kumar Gala
• [PATCH] Fake NUMA emulation for PowerPC   Balbir Singh
• [PATCH] Fake NUMA emulation for PowerPC   Balbir Singh
• [PATCH] Fake NUMA emulation for PowerPC   Balbir Singh
• [PATCH] Fake NUMA emulation for PowerPC (Take 2)   Balbir Singh
• [PATCH] Fake NUMA emulation for PowerPC   David Rientjes
• [PATCH] Fake NUMA emulation for PowerPC   David Rientjes
• [PATCH] Fake NUMA emulation for PowerPC   David Rientjes
• dtc: Convert #address-cells and #size-cells related checks   David Gibson
• [DTC][PATCH] Fix cross-compile building   David Gibson
• Xilinx EDK BSP generation of device trees for microblaze and PowerPC   Stephen Neuendorffer
• dtc: Remove header information dumping   David Gibson
• [PATCH 1/5] PowerPC 74xx: Katana Qp device tree   David Gibson
• [PATCH] Fake NUMA emulation for PowerPC   Balbir Singh
• [PATCH] Fake NUMA emulation for PowerPC   Balbir Singh
• [PATCH] Fake NUMA emulation for PowerPC   David Rientjes
• Please pull linux-2.6-8xx.git for-paulus branch   Vitaly Bordug
• Please pull linux-2.6-8xx.git for-paulus branch   Vitaly Bordug
• [DTC][PATCH] Fix cross-compile building   Stuart Hughes
• Please pull linux-2.6-8xx.git for-paulus branch   Kumar Gala
• Stupid git question: adding acked-by   Jerry Van Baren
• Stupid git question: adding acked-by   Geoff Levand
• Stupid git question: adding acked-by   Grant Likely
• Stupid git question: adding acked-by   Stephen Rothwell
• [PATCH 16/25] powerpc: EP405 boards support for arch/powerpc   Benjamin Herrenschmidt
• [PATCH 18/25] powerpc: Base support for 440GX Taishan eval board   Benjamin Herrenschmidt
• [PATCH 19/25] powerpc: Wire up PCI on Bamboo board   Benjamin Herrenschmidt
• [PATCH 21/25] powerpc: Adds decoding of 440SPE memory size to boot wrapper library   Benjamin Herrenschmidt
• [PATCH 23/25] powerpc: Rework 4xx clock probing in boot wrapper   Benjamin Herrenschmidt
• [PATCH 11/25] powerpc: 4xx PLB to PCI Express support   Benjamin Herrenschmidt
• [PATCH 1/11] ibm_newemac: Add BCM5248 and Marvell 88E1111 PHY support   Benjamin Herrenschmidt
• [PATCH] pci: Fix bus resource assignment on 32 bits with 64b resources   Benjamin Herrenschmidt
• [PATCH 19/19] [POWERPC] pci_controller->arch_data really is a struct device_node *   Benjamin Herrenschmidt
• Powerpc PCI cleanups (mainly iSeries)   Benjamin Herrenschmidt
• Please pull linux-2.6-8xx.git for-paulus branch   Vitaly Bordug
• [PATCH] Fake NUMA emulation for PowerPC   Pavel Machek
• [PATCH] Fake NUMA emulation for PowerPC   Balbir Singh
• Powerpc PCI cleanups (mainly iSeries)   Josh Boyer
• [PATCH 18/25] powerpc: Base support for 440GX Taishan eval board   Olof Johansson
• [PATCH 18/25] powerpc: Base support for 440GX Taishan eval board   Josh Boyer
• [PATCH 18/25] powerpc: Base support for 440GX Taishan eval board   Benjamin Herrenschmidt
• [PATCH 18/25] powerpc: Base support for 440GX Taishan eval board   Olof Johansson
• [i2c] [PATCH 0/4] Series to add device tree naming to i2c   Jon Smirl
• [i2c] [PATCH 0/4] Series to add device tree naming to i2c   Olof Johansson
• [i2c] [PATCH 0/4] Series to add device tree naming to i2c   Benjamin Herrenschmidt
• [i2c] [PATCH 0/4] Series to add device tree naming to i2c   Jon Smirl
• [i2c] [PATCH 0/4] Series to add device tree naming to i2c   Benjamin Herrenschmidt
• [i2c] [PATCH 0/4] Series to add device tree naming to i2c   Jon Smirl
• [i2c] [PATCH 0/4] Series to add device tree naming to i2c   Benjamin Herrenschmidt
• [i2c] [PATCH 0/4] Series to add device tree naming to i2c   Jon Smirl
• [i2c] [PATCH 0/4] Series to add device tree naming to i2c   Olof Johansson
• [PATCH] IB/ehca: Serialize HCA-related hCalls on POWER5   Roland Dreier
• [PATCH 0/4] Series to add device tree naming to i2c   Jon Smirl
• [PATCH 1/4] Implement module aliasing for i2c to translate from device tree names   Jon Smirl
• [PATCH 2/4] Modify several rtc drivers to use the alias names list property of i2c   Jon Smirl
• [PATCH 3/4] Convert PowerPC MPC i2c to of_platform_driver from platform_driver   Jon Smirl
• [PATCH 4/4] Convert pfc8563 i2c driver from old style to new style   Jon Smirl
• CC munging by mailman lists (Was: Re: [PATCH 18/25] powerpc: Base support for 440GX Taishan eval board)   Stephen Rothwell
• Test, please ignore   Stephen Rothwell
• FSL device-trees i8259 bugs (and others too !)   Benjamin Herrenschmidt
• [PATCH 18/25] powerpc: Base support for 440GX Taishan eval board   Josh Boyer
• looking for ibook users   Benjamin Herrenschmidt
• [0/3] Merge libfdt into the bootwrapper   David Gibson
• [PATCH 1/3] Merge libfdt upstream source   David Gibson
• [PATCH 2/3] Use embedded libfdt in the bootwrapper   David Gibson
• [PATCH 3/3] Kill flatdevtree.c   David Gibson
• [PATCH 19/19] [POWERPC] pci_controller->arch_data really is a struct device_node *   Stephen Rothwell
• [PATCH 8/25] powerpc: Improve support for 4xx indirect DCRs   Benjamin Herrenschmidt
• [PATCH] Fix rounding bug in emulation for double float operating   David Gibson
• [PATCH 16/25] powerpc: EP405 boards support for arch/powerpc   Benjamin Herrenschmidt
• [PATCH] Fix rounding bug in emulation for double float operating   Liu Yu
• [PATCH] Fix rounding bug in emulation for double floatoperating   Liu Yu
• [PATCH 18/25] powerpc: Base support for 440GX Taishan eval board   Benjamin Herrenschmidt
• [PATCH 19/25] powerpc: Wire up PCI on Bamboo board   Benjamin Herrenschmidt
• [PATCH 23/25] powerpc: Rework 4xx clock probing in boot wrapper   Benjamin Herrenschmidt
• [PATCH] pci: Fix bus resource assignment on 32 bits with 64b resources   Benjamin Herrenschmidt
• [PATCH] pci: Fix bus resource assignment on 32 bits with 64b resources   Benjamin Herrenschmidt
• [PATCH 1/2] pci: Fix bus resource assignment on 32 bits with 64b resources   Benjamin Herrenschmidt
• [PATCH 2/2] pci: Fix warning in setup-res.c on 32-bit platforms with 64-bit resources   Benjamin Herrenschmidt
• [PATCH] [POWERPC] 4xx: Add 440SPe revA runtime detection to PCIe driver   Stefan Roese
• [PATCH] IB/ehca: Return correct #SGEs for SRQ   Joachim Fenkes
• [PATCH 23/25] powerpc: Rework 4xx clock probing in boot wrapper   Josh Boyer
• No subject   Aggrwal Poonam
• FW: [PATCH 0/3] UCC TDM driver for MPC83xx platforms   Aggrwal Poonam
• [PATCH 1/3] drivers/misc :UCC based TDM driver for MPC83xx platforms.   Poonam_Aggrwal-b10812
• [PATCH 2/3] arch/ : Platform changes for UCC TDM driver for MPC8323ERDB.Also includes related QE changes.   Poonam_Aggrwal-b10812
• [PATCH 3/3] Modified Documentation to explain dts entries for UCC TDM driver.   Poonam_Aggrwal-b10812
• [PATCH] Fix rounding bug in emulation for double floatoperating   Kumar Gala
• [PATCH] windfarm: add PowerMac 12,1 support   Étienne Bersac
• [PATCH 3/4] Convert PowerPC MPC i2c to of_platform_driver from platform_driver   Kumar Gala
• [PATCH] windfarm: add PowerMac 12,1 support   Arnd Bergmann
• [PATCH 3/4] Convert PowerPC MPC i2c to of_platform_driver from platform_driver   Jon Smirl
• [i2c] [PATCH 0/4] Series to add device tree naming to i2c   Scott Wood
• [PATCH] mpc8272ads, pq2fads: Update defconfig with CONFIG_FS_ENET_MDIO_FCC   Scott Wood
• [PATCH] windfarm: add PowerMac 12,1 support   Étienne Bersac
• [PATCH 1/5] PowerPC 74xx: Katana Qp device tree   Mark A. Greer
• [PATCH] windfarm: add PowerMac 12,1 support   Étienne Bersac
• [PATCH 2/3] Use embedded libfdt in the bootwrapper   Scott Wood
• [PATCH] IB/ehca: Serialize HCA-related hCalls on POWER5   Joachim Fenkes
• [PATCH] IB/ehca: Serialize HCA-related hCalls if necessary   Joachim Fenkes
• [PATCH] IB/ehca: Serialize HCA-related hCalls on POWER5   Joachim Fenkes
• [PATCH 4/25] powerpc: Reworking machine check handling and Fix 440/440A   Josh Boyer
• [i2c] [PATCH 0/4] Series to add device tree naming to i2c   Jon Smirl
• [PATCH 0/5] Series to add device tree naming to i2c   Jon Smirl
• [PATCH 1/5] Implement module aliasing for i2c to translate from device tree names   Jon Smirl
• [PATCH 2/5] Modify several rtc drivers to use the alias names list property of i2c   Jon Smirl
• [PATCH 3/5] Clean up error returns   Jon Smirl
• [PATCH 4/5] Convert PowerPC MPC i2c to of_platform_driver from platform_driver   Jon Smirl
• [PATCH 5/5] Convert pfc8563 i2c driver from old style to new style   Jon Smirl
• [i2c] [PATCH 0/4] Series to add device tree naming to i2c   Scott Wood
• [PATCH 2/3] arch/ : Platform changes for UCC TDM driver for MPC8323ERDB.Also includes related QE changes.   Timur Tabi
• [i2c] [PATCH 0/4] Series to add device tree naming to i2c   Jon Smirl
• [PATCH] Fake NUMA emulation for PowerPC (Take 2)   Balbir Singh
• [PATCH] [POWERPC][RFC] MPC8360E-RDK: Device tree and board file   Anton Vorontsov
• [i2c] [PATCH 0/4] Series to add device tree naming to i2c   Benjamin Herrenschmidt
• [PATCH 4/25] powerpc: Reworking machine check handling and Fix 440/440A   Benjamin Herrenschmidt
• [i2c] [PATCH 0/4] Series to add device tree naming to i2c   Benjamin Herrenschmidt
• [PATCH 4/25] powerpc: Reworking machine check handling and Fix 440/440A   Josh Boyer
• [PATCH RFC 0/7] "NAND on UPM" and related patches   Anton Vorontsov
• [PATCH RFC 1/7] [POWERPC] Implement GPIO API embryo   Anton Vorontsov
• [PATCH RFC 2/7] [POWERPC] QE: implement GPIO API   Anton Vorontsov
• [PATCH RFC 3/7] [POWERPC] CPM2: implement GPIO API   Anton Vorontsov
• [PATCH RFC 4/7] [GPIO] Let drivers link if they support GPIO API as an addition   Anton Vorontsov
• [PATCH RFC 5/7] [POWERPC] FSL UPM: routines to manage FSL UPMs   Anton Vorontsov
• [PATCH RFC 6/7] [POWERPC][NAND] FSL UPM NAND driver   Anton Vorontsov
• [PATCH RFC 7/7] [POWERPC] MPC8360E-RDK: add support for NAND on UPM   Anton Vorontsov
• ppc vs powerpc   Jon Smirl
• ppc vs powerpc   Grant Likely
• ppc vs powerpc   Jon Smirl
• [PATCH 1/5] PowerPC 74xx: Katana Qp device tree   Dale Farnsworth
• [PATCH] IB/ehca: Serialize HCA-related hCalls on POWER5   Roland Dreier
• ppc vs powerpc   Jon Smirl
• ppc vs powerpc   Tony Breeds
• [PATCH] Addition to the i2c series, copy the ppc mpc-i2c driver before changing it on powerpc   Jon Smirl
• [PATCH] Addition to the i2c series, copy the ppc mpc-i2c driver before changing it on powerpc   Tony Breeds
• [PATCH] Addition to the i2c series, copy the ppc mpc-i2c driver before changing it on powerpc   Grant Likely
• [PATCH] Addition to the i2c series, copy the ppc mpc-i2c driver before changing it on powerpc   Jon Smirl
• [PATCH] Addition to the i2c series, copy the ppc mpc-i2c driver before changing it on powerpc   Jon Smirl
• [PATCH RFC 4/7] [GPIO] Let drivers link if they support GPIO API as an addition   David Brownell
• [PATCH RFC 7/7] [POWERPC] MPC8360E-RDK: add support for NAND on UPM   David Gibson
• [PATCH RFC 4/7] [GPIO] Let drivers link if they support GPIO API as an addition   Anton Vorontsov
• [PATCH RFC 0/7] "NAND on UPM" and related patches   David Gibson
• [PATCH] Fake NUMA emulation for PowerPC (Take 2)   Olof Johansson
• [PATCH RFC 0/7] "NAND on UPM" and related patches   Anton Vorontsov
• [PATCH 2/3] Use embedded libfdt in the bootwrapper   David Gibson
• [PATCH RFC 7/7] [POWERPC] MPC8360E-RDK: add support for NAND on UPM   Anton Vorontsov
• [PATCH 2/3] Use embedded libfdt in the bootwrapper   Scott Wood
• [PATCH 2/3] Use embedded libfdt in the bootwrapper   Scott Wood
• [PATCH 2/3] Use embedded libfdt in the bootwrapper   David Gibson
• [PATCH 02/19] [POWERPC] consolidate pci_controller   Stephen Rothwell
• [PATCH 14/19] [POWERPC] Inline pci_setup_pci_controller as it has become trivial   Stephen Rothwell
• [PATCH 16/19] [POWERPC] iSeries: hose->buid is always zero for iSeries   Stephen Rothwell
• Powerpc PCI cleanups (mainly iSeries)   Stephen Rothwell
• [PATCH] powerpc: Update smu command definitions   Benjamin Herrenschmidt
• [PATCH 2/3] arch/ : Platform changes for UCC TDM driver for MPC8323ERDB.Also includes related QE changes.   Stephen Rothwell
• [PATCH] powerpc: Update smu command definitions   Benjamin Herrenschmidt
• [PATCH] [POWERPC][RFC] MPC8360E-RDK: Device tree and board file   Stephen Rothwell
• [PATCH 0/8] powerpc: mv64x60/prpmc2800 - DTS updates, etc.   Mark A. Greer
• [PATCH RFC 0/7] "NAND on UPM" and related patches   David Gibson
• [PATCH 1/8] powerpc: prpmc2800 - Convert dts file to v1   Mark A. Greer
• [PATCH 2/8] powerpc: prpmc2800 - Add labels to dts file   Mark A. Greer
• [PATCH 3/8] powerpc: mv64x60 - Replace marvell, mv64x60 with marvell, mv64360   Mark A. Greer
• [PATCH 4/8] powerpc: mv64x60 - Update ethernet DTS nodes   Mark A. Greer
• [PATCH 5/8] powerpc: MPSC - Update DTS entries   Mark A. Greer
• [PATCH 6/8] powerpc: mv64x60 - Update i2c DTS properties   Mark A. Greer
• [PATCH 7/8] powerpc: mv64x60 - Remove timeout property for WDT   Mark A. Greer
• [PATCH 8/8] powerpc: prpmc2800 - Miscellaneous DTS file fixups   Mark A. Greer
• initrd - console   Siva Prasad
• initrd - console   Michael Ellerman
• [PATCH] Fix rounding bug in emulation for double floatoperating   Liu Yu
• [PATCH] Fix rounding bug in emulation for double floatoperating   Zang Roy-r61911
• Help:To Add NAND Node in Device Tree   ashish
• Patches added to for-2.6.25 and master branches of powerpc.git   Paul Mackerras
• [PATCH] IB/ehca: Serialize HCA-related hCalls on POWER5   Joachim Fenkes
• Patches added to for-2.6.25 and master branches of powerpc.git   Balbir Singh
• [PATCH 2.6.25 0/5] PMU updates including suspend   Johannes Berg
• [PATCH 2.6.25 1/5] PMU: dont lock_kernel()   Johannes Berg
• [PATCH 2.6.25 2/5] PMU: remove dead code   Johannes Berg
• [PATCH 2.6.25 3/5] adb: replace sleep notifier with platform driver suspend/resume hooks   Johannes Berg
• [PATCH 2.6.25 4/5] via-pmu: kill sleep notifiers completely   Johannes Berg
• [PATCH 2.6.25 5/5] powermac: proper sleep management   Johannes Berg
• Patches added to for-2.6.25 and master branches of powerpc.git   Jon Loeliger
• [PATCH] Fix rounding bug in emulation for double floatoperating   Kumar Gala
• [RFC][POWERPC] Provide a way to protect 4k subpages when using 64k pages   Christoph Hellwig
• [PATCH] [POWERPC][RFC] MPC8360E-RDK: Device tree and board file   Anton Vorontsov
• Patches added to for-2.6.25 and master branches of powerpc.git   Arnd Bergmann
• Patches added to for-2.6.25 and master branches of powerpc.git   Josh Boyer
• [PATCH] [POWERPC][RFC] MPC8360E-RDK: Device tree and board file   Kumar Gala
• cpu frequency governor regression (?)   Johannes Berg
• [RFC][POWERPC] Provide a way to protect 4k subpages when using 64k pages   Arnd Bergmann
• [PATCH 1/3] 8xx: Analogue & Micro Adder875 board support.   Scott Wood
• [PATCH 2/3] mpc82xx: Embedded Planet EP8248E support   Scott Wood
• [PATCH 3/3] Eliminate section mismatch warning in cpm2_reset().   Scott Wood
• [PATCH 1/2] wrapper: rename offset in offset_devp().   Scott Wood
• [PATCH 2/2] wrapper: Treat NULL as root node in devp_offset; add devp_offset_find().   Scott Wood
• [RFC][POWERPC] Provide a way to protect 4k subpages when using 64k pages   Paul Mackerras
• [PATCH 0/5] Series to add device tree naming to i2c   Geert Uytterhoeven
• [PATCH 0/5] Series to add device tree naming to i2c   Jon Smirl
• [RFC][POWERPC] Provide a way to protect 4k subpages when using 64k pages   Benjamin Herrenschmidt
• [PATCH 2/5] PowerPC 74xx: Minor updates to MV64x60 boot code   Mark A. Greer
• [PATCH] Introduce driver_create/remove_dir   Stephen Rothwell
• [PATCH 3/5] PowerPC 74xx: Katana Qp bootwrapper   Mark A. Greer
• [PATCH] Introduce driver_create/remove_dir   Randy Dunlap
• [PATCH 4/5] PowerPC 74xx: Katana Qp base support   Mark A. Greer
• initrd - /dev   Siva Prasad
• [PATCH] Introduce driver_create/remove_dir   Stephen Rothwell
• apm_emulation regression   Benjamin Herrenschmidt
• [PATCH 2.6.25 5/5] powermac: proper sleep management   Paul Mackerras
• [PATCH 2.6.25 5/5] powermac: proper sleep management   Paul Mackerras
• [PATCH] [POWERPC] iSeries: don't printk with HV spinlock held.   Stephen Rothwell
• [PATCH] [POWERPC] iSeries: fix unregistering HV event handlers.   Stephen Rothwell
• [PATCH 1/3] 8xx: Analogue & Micro Adder875 board support.   Stephen Rothwell
• [PATCH 2/3] mpc82xx: Embedded Planet EP8248E support   Stephen Rothwell
• [PATCH 1/2] wrapper: rename offset in offset_devp().   Stephen Rothwell
• [PATCH] [POWERPC] FSL: I2C device tree cleanups   Kumar Gala
• [PATCH 0/13] [POWERPC] PCI updates & merges   Benjamin Herrenschmidt
• [PATCH 1/13] [POWERPC] pci32: remove bogus alignment message   Benjamin Herrenschmidt
• [PATCH 2/13] [POWERPC] pci32: use generic pci_assign_unassign_resources   Benjamin Herrenschmidt
• [PATCH 3/13] [POWERPC] pci32: Remove PowerMac P2P bridge IO hack   Benjamin Herrenschmidt
• [PATCH 4/13] [POWERPC] pci32: Add flags modifying the PCI code behaviour   Benjamin Herrenschmidt
• [PATCH 5/13] [POWERPC] pci32: Remove obsolete PowerMac bus number hack   Benjamin Herrenschmidt
• [PATCH 6/13] [POWERPC] pci32: Add platform option to enable /proc PCI domains   Benjamin Herrenschmidt
• [PATCH 7/13] [POWERPC] Merge pcibios_resource_to_bus/bus_to_resource   Benjamin Herrenschmidt
• [PATCH 8/13] [POWERPC] Merge PCI resource fixups   Benjamin Herrenschmidt
• [PATCH 9/13] [POWERPC] Merge PCI resource allocation & assignment   Benjamin Herrenschmidt
• [PATCH 10/13] [POWERPC] Updates/fixes to 32 bits pcibios_enable_device()   Benjamin Herrenschmidt
• [PATCH 11/13] [POWERPC] Merge 32 and 64 bits pcibios_enable_device   Benjamin Herrenschmidt
• [PATCH 12/13] [POWERPC] Fixup powermac enable device hook   Benjamin Herrenschmidt
• [PATCH 13/13] [POWERPC] Clear pci_probe_only on 64 bits PowerMac   Benjamin Herrenschmidt
• [PATCH 1/2] Make setjmp/longjmp code generic   Michael Neuling
• [PATCH 2/2] kdump shutdown hook support   Michael Neuling
• [PATCH] [POWERPC] iSeries: fix unregistering HV event handlers.   Paul E. McKenney
• [PATCH] [POWERPC] pasemi: Implement MSI support   Olof Johansson
• [PATCH v2] [POWERPC] pasemi: Implement MSI support   Olof Johansson
• [PATCH v2] [POWERPC] pasemi: Implement MSI support   Michael Ellerman
• [PATCH 2/2] kdump shutdown hook support   Olof Johansson
• [PATCH v2] [POWERPC] pasemi: Implement MSI support   Olof Johansson
• [PATCH] [POWERPC] FSL: enet device tree cleanups   Kumar Gala
• [PATCH] [POWERPC] FSL: Added aliases node to device trees   Kumar Gala
• [PATCH 1/2] Make setjmp/longjmp code generic   Kumar Gala
• [PATCH 1/3] ps3: vuart: fix error path locking   Daniel Walker
• [PATCH 1/2] Make setjmp/longjmp code generic   Benjamin Herrenschmidt
• [PATCH] Fix rounding bug in emulation for double floatoperating   Zang Roy-r61911
• [PATCH 1/2] Make setjmp/longjmp code generic   Stephen Rothwell
• [PATCH 1/2] Make setjmp/longjmp code generic   Benjamin Herrenschmidt
• Lnux 2.6.24-rc5   Subrata Modak
• [PATCH 1/2] Make setjmp/longjmp code generic   Michael Neuling
• [ewg] Re: [PATCH] IB/ehca: Serialize HCA-related hCalls on POWER5   Or Gerlitz
• [PATCH RFC 0/7] "NAND on UPM" and related patches   Anton Vorontsov
• Lnux 2.6.24-rc5   Josh Boyer
• Lnux 2.6.24-rc5   Subrata Modak
• [PATCH] Fix rounding bug in emulation for double floatoperating   Kumar Gala
• [PATCH v5] qe: add ability to upload QE firmware   Timur Tabi
• [PATCH 1/2] qe: add function qe_clock_source()   Timur Tabi
• [PATCH 2/2] ucc_geth: use rx-clock-name and tx-clock-name device tree properties   Timur Tabi
• [PATCH RFC 3/7] [POWERPC] CPM2: implement GPIO API   Jochen Friedrich
• [PATCH v5] qe: add ability to upload QE firmware   Kumar Gala
• [ewg] Re: [PATCH] IB/ehca: Serialize HCA-related hCalls on POWER5   Christoph Raisch
• [PATCH RFC 3/7] [POWERPC] CPM2: implement GPIO API   Anton Vorontsov
• [PATCH RFC 0/7] "NAND on UPM" and related patches   Scott Wood
• [PATCH RFC 0/7] "NAND on UPM" and related patches   Scott Wood
• [PATCH/RFC] CPM1: implement GPIO API   Jochen Friedrich
• [PATCH/RFC] [POWERPC] Add fixed-phy support for fs_enet   Jochen Friedrich
• [PATCH RFC 1/7] [POWERPC] Implement GPIO API embryo   Scott Wood
• [RFC] ehea: kdump support using new shutdown hook   Thomas Klein
• [PATCH RFC 0/7] "NAND on UPM" and related patches   Scott Wood
• [PATCH RFC 0/7] "NAND on UPM" and related patches   Anton Vorontsov
• [PATCH RFC 3/7] [POWERPC] CPM2: implement GPIO API   Scott Wood
• [PATCH RFC 7/7] [POWERPC] MPC8360E-RDK: add support for NAND on UPM   Scott Wood
• [RFC] ehea: kdump support using new shutdown hook   Dave Jones
• [PATCH RFC 1/7] [POWERPC] Implement GPIO API embryo   Anton Vorontsov
• cpu frequency governor regression (?)   Dave Jones
• [PATCH 1/8] Implement arch disable/enable irq hooks.   Scott Wood
• cpu frequency governor regression (?)   Johannes Berg
• [PATCH 2/8] pm: Add TLF_SLEEPING hack to delay interrupt delivery when waking from sleep.   Scott Wood
• [PATCH 3/8] Add 6xx-style HID0_SLEEP support.   Scott Wood
• [PATCH 4/8] fsl_soc: Factor fsl_get_sys_freq() out of the wdt init.   Scott Wood
• [PATCH 5/8] mpc83xx: Power Management support   Scott Wood
• [PATCH 6/8] mpc83xx: timer driver for PM wakeup   Scott Wood
• [PATCH 7/8] gianfar: Add flags for magic packet and MDIO.   Scott Wood
• [PATCH 8/8] gianfar: Magic Packet and suspend/resume support.   Scott Wood
• apm_emulation regression   Johannes Berg
• [ewg] Re: [PATCH] IB/ehca: Serialize HCA-related hCalls on POWER5   Roland Dreier
• cpu frequency governor regression (?)   Johannes Berg
• [PATCH] IB/ehca: Return correct #SGEs for SRQ   Roland Dreier
• [PATCH] IB/ehca: Serialize HCA-related hCalls if necessary   Roland Dreier
• [PATCH RFC 0/7] "NAND on UPM" and related patches   Anton Vorontsov
• [PATCH RFC 0/7] "NAND on UPM" and related patches   Scott Wood
• Patches added to for-2.6.25 and master branches of powerpc.git   Geoff Levand
• [PATCH RFC 0/7] "NAND on UPM" and related patches   Scott Wood
• [PATCH v5] qe: add ability to upload QE firmware   Arnd Bergmann
• [PATCH/RFC] CPM1: implement GPIO API   Arnd Bergmann
• [PATCH v2 5/8] mpc83xx: Power Management support   Scott Wood
• [PATCH 2/3] mpc82xx: Embedded Planet EP8248E support   Scott Wood
• [PATCH v2] [POWERPC] pasemi: Implement MSI support   Michael Ellerman
• [PATCH v2 1/3] 8xx: Analogue & Micro Adder875 board support.   Scott Wood
• [PATCH v2 2/3] mpc82xx: Embedded Planet EP8248E support   Scott Wood
• [PATCH v2 3/3] Eliminate section mismatch warning in cpm2_reset().   Scott Wood
• [PATCH 1/2] Make setjmp/longjmp code generic   Michael Ellerman
• [PATCH 4/8] fsl_soc: Factor fsl_get_sys_freq() out of the wdt init.   Stephen Rothwell
• [PATCH 2/2] kdump shutdown hook support   Michael Ellerman
• [PATCH v2] [POWERPC] pasemi: Implement MSI support   Michael Ellerman
• [PATCH 1/2] Make setjmp/longjmp code generic   Michael Neuling
• [PATCH 2/2] kdump shutdown hook support   Michael Neuling
• [PATCH 6/8] mpc83xx: timer driver for PM wakeup   Stephen Rothwell
• [PATCH/RFC] CPM1: implement GPIO API   Anton Vorontsov
• [PATCH 2/2] kdump shutdown hook support   Michael Neuling
• [PATCH 2/3] mpc82xx: Embedded Planet EP8248E support   Stephen Rothwell
• [PATCH 1/3] ps3: vuart: fix error path locking   Geoff Levand
• initrd - console   Siva Prasad
• [PATCH RFC 0/7] "NAND on UPM" and related patches   Chris Fester
• [PATCH] Convert media-bay.c to use the kthread API   Paul Mackerras
• [PATCH 0/2] Add crashdump shutdown hooks   Michael Neuling
• [PATCH 1/2] Make setjmp/longjmp code generic   Michael Neuling
• [PATCH 2/2] kdump shutdown hook support   Michael Neuling
• printf - How does it work?   Siva Prasad
• [PATCH] Convert adb.c to use kthread API and not spin on ADB requests   Paul Mackerras
• [PATCH] Convert therm_pm72.c to use the kthread API   Paul Mackerras
• [PATCH] Convert therm_windtunnel.c to use the kthread API   Paul Mackerras
• [PATCH 2/2] kdump shutdown hook support   Olof Johansson
• [PATCH 2/2] kdump shutdown hook support   Olof Johansson
• [PATCH] Do ioremap and allocation for sleep on 3400 once at boot   Paul Mackerras
• [RFC] ehea: kdump support using new shutdown hook   Michael Ellerman
• [RFC] ehea: kdump support using new shutdown hook   Michael Ellerman
• drivers/net/iseries_veth.c dubious sysfs usage   Greg KH
• [PATCH] Introduce driver_create/remove_dir   Greg KH
• [PATCH 1/20] [POWERPC] Reworking machine check handling and Fix 440/440A   Benjamin Herrenschmidt
• [PATCH 2/20] [POWERPC] Improve support for 4xx indirect DCRs   Benjamin Herrenschmidt
• [PATCH 3/20] [POWERPC] 4xx PLB to PCI-X support   Benjamin Herrenschmidt
• [PATCH 4/20] [POWERPC] 4xx PLB to PCI 2.x support   Benjamin Herrenschmidt
• [PATCH 5/20] [POWERPC] 4xx PLB to PCI Express support   Benjamin Herrenschmidt
• [PATCH 6/20] [POWERPC] PCI support for 4xx Ebony board   Benjamin Herrenschmidt
• [PATCH 7/20] [POWERPC] Add early udbg support for 40x processors   Benjamin Herrenschmidt
• [PATCH 8/20] [POWERPC] EP405 boards support for arch/powerpc   Benjamin Herrenschmidt
• [PATCH 9/20] [POWERPC] Add PCI to Walnut platform   Benjamin Herrenschmidt
• [PATCH 10/20] [POWERPC] Base support for 440GX Taishan eval board   Benjamin Herrenschmidt
• [PATCH 11/20] [POWERPC] Wire up PCI on Bamboo board   Benjamin Herrenschmidt
• [PATCH 12/20] [POWERPC] Wire up 440EP USB controlle support to Bamboo board   Benjamin Herrenschmidt
• [PATCH 13/20] [POWERPC] Adds decoding of 440SPE memory size to boot wrapper library   Benjamin Herrenschmidt
• [PATCH 14/20] [POWERPC] Add mfspr/mtspr inline macros to 4xx bootwrapper   Benjamin Herrenschmidt
• [PATCH 15/20] [POWERPC] Adds 44x CPR0 accessors to boot wrapper   Benjamin Herrenschmidt
• [PATCH 16/20] [POWERPC] Rework 4xx clock probing in boot wrapper   Benjamin Herrenschmidt
• [PATCH 17/20] [POWERPC] Base support for 440SPe "Katmai" eval board   Benjamin Herrenschmidt
• [PATCH 18/20] [POWERPC] 4xx PCI-E Link setup improvements   Benjamin Herrenschmidt
• [PATCH 19/20] [POWERPC] pci32: 4xx embedded platforms want to reassign all PCI resources   Benjamin Herrenschmidt
• [PATCH 20/20] [POWERPC] 4xx: Add 440SPe revA runtime detection to PCIe   Benjamin Herrenschmidt
• [0/3] Add RapidIO support to powerpc architecture with memory mapping   Zhang Wei
• [PATCH 1/3] Move arch/ppc/syslib/ppc85xx_rio.c to arch/powerpc/sysdev/fsl_rio.c   Zhang Wei
• [PATCH 3/3] Add memory mapping support to rionet driver.   Zhang Wei
• [ewg] Re: [PATCH] IB/ehca: Serialize HCA-related hCalls on POWER5   Or Gerlitz
• [PATCH 19/20] [POWERPC] pci32: 4xx embedded platforms want to reassign all PCI resources   Stefan Roese
• [PATCH 19/20] [POWERPC] pci32: 4xx embedded platforms want to reassign all PCI resources   Stefan Roese
• [PATCH 0/2] Add crashdump shutdown hooks   Michael Neuling
• [PATCH 1/2] Make setjmp/longjmp code generic   Michael Neuling
• [PATCH 2/2] kdump shutdown hook support   Michael Neuling
• [PATCH 1/2] cleanup calling mmio_nvram_init   Ishizaki Kou
• [PATCH 2/2] celleb: split machine definition   Ishizaki Kou
• [PATCH 0/6] PS3: gelic: gelic updates for 2.6.25   Masakazu Mokuno
• [PATCH 19/20] [POWERPC] pci32: 4xx embedded platforms want to reassign all PCI resources   Benjamin Herrenschmidt
• [RFC] ehea: kdump support using new shutdown hook   Subrata Modak
• apm_emulation regression   Johannes Berg
• [PATCH 1/6] PS3: gelic: Fix the wrong dev_id passed   Masakazu Mokuno
• [PATCH 2/6] PS3: gelic: Add endianness macros   Masakazu Mokuno
• [PATCH 1/2] cleanup calling mmio_nvram_init   Arnd Bergmann
• [PATCH 3/6] PS3: gelic: code cleanup   Masakazu Mokuno
• [PATCH 2/2] celleb: split machine definition   Arnd Bergmann
• [PATCH 4/6] PS3: gelic: remove duplicated ethtool handers   Masakazu Mokuno
• [PATCH 5/6] PS3: gelic: add support for port link status   Masakazu Mokuno
• [PATCH 6/6] PS3: gelic: Add support for dual network interface   Masakazu Mokuno
• [PATCH] IB/ehca: Fix lock flag location, bump version number   Joachim Fenkes
• [PATCH RFC 0/7] "NAND on UPM" and related patches   Anton Vorontsov
• [PATCH/RFC] CPM1: implement GPIO API   Scott Wood
• [PATCH/RFC] CPM1: implement GPIO API   Scott Wood
• [PATCH 1/4] nand base: Don't panic if a controller driver does ecc its own way.   Scott Wood
• [PATCH 2/4] nand base: Give drivers a chance to do late initialization.   Scott Wood
• [PATCH 3/4] mtd: Factor out OF partition support from the NOR driver.   Scott Wood
• [PATCH 4/4] MPC8313 enhanced Local Bus Controller NAND support.   Scott Wood
• [PATCH 1/4] mpc8313erdb: Fix whitespace.   Scott Wood
• [PATCH 2/4] mpc8313erdb: Add NAND to device tree, and call of_platform_bus_probe().   Scott Wood
• [PATCH 3/4] mpc8313erdb: Add NOR flash to the device tree.   Scott Wood
• [PATCH 4/4] mpc8313erdb: Update defconfig with NOR flash, NAND flash, and JFFS enabled.   Scott Wood
• [PATCH] mpc834x_mds: Fix whitespace and call of_platform_bus_probe().   Scott Wood
• [PATCH] IB/ehca: Fix lock flag location, bump version number   Roland Dreier
• [PATCH 19/20] [POWERPC] pci32: 4xx embedded platforms want to reassign all PCI resources   Josh Boyer
• [PATCH 19/20] [POWERPC] pci32: 4xx embedded platforms want to reassign all PCI resources   Josh Boyer
• [ofa-general] Re: [ewg] Re: [PATCH] IB/ehca: Serialize HCA-related hCalls on POWER5   Caitlin Bestler
• [PATCH 1/20] [POWERPC] Reworking machine check handling and Fix 440/440A   Josh Boyer
• [PATCH/RFC] CPM1: implement GPIO API   Arnd Bergmann
• apm_emulation regression   Benjamin Herrenschmidt
• [PATCH 19/20] [POWERPC] pci32: 4xx embedded platforms want to reassign all PCI resources   Benjamin Herrenschmidt
• [PATCH 19/20] [POWERPC] pci32: 4xx embedded platforms want to reassign all PCI resources   Benjamin Herrenschmidt
• [PATCH 1/20] [POWERPC] Reworking machine check handling and Fix 440/440A   Benjamin Herrenschmidt
• [PATCH 19/20] [POWERPC] pci32: 4xx embedded platforms want to reassign all PCI resources   Josh Boyer
• [PATCH 19/20] [POWERPC] pci32: 4xx embedded platforms want to reassign all PCI resources   Benjamin Herrenschmidt
• [ofa-general] Re: [ewg] Re: [PATCH] IB/ehca: Serialize HCA-related hCalls on POWER5   Joachim Fenkes
• [ofa-general] Re: [ewg] Re: [PATCH] IB/ehca: Serialize HCA-related hCalls on POWER5   Caitlin Bestler
• [PATCH 19/20] [POWERPC] pci32: 4xx embedded platforms want to reassign all PCI resources   Josh Boyer
• [ofa-general] Re: [ewg] Re: [PATCH] IB/ehca: Serialize HCA-related hCalls on POWER5   Joachim Fenkes
• [PATCH 19/20] [POWERPC] pci32: 4xx embedded platforms want to reassign all PCI resources   Benjamin Herrenschmidt
• [PATCH 2/4] mpc8313erdb: Add NAND to device tree, and call of_platform_bus_probe().   Olof Johansson
• [ofa-general] Re: [ewg] Re: [PATCH] IB/ehca: SerializeHCA-related hCalls on POWER5   Sean Hefty
• [PATCH 19/20] [POWERPC] pci32: 4xx embedded platforms want to reassign all PCI resources   Josh Boyer
• Device Tree updates for xilinx.   Stephen Neuendorffer
• [PATCH 1/7] bootwrapper: Add a firmware-independent "raw" target.   Stephen Neuendorffer
• [PATCH 2/7] [POWERPC] Xilinx: clear data caches.   Stephen Neuendorffer
• [PATCH 3/7] [POWERPC] Xilinx: Uartlite: Make console output actually work.   Stephen Neuendorffer
• [PATCH 4/7] [POWERPC] Xilinx: update compatible list for interrupt controller   Stephen Neuendorffer
• [PATCH 5/7] [POWERPC] Xilinx: Update compatible to use values generated by BSP generator.   Stephen Neuendorffer
• [PATCH 6/7] [POWERPC] Xilinx: Add correct compatible list for device tree bus bindings.   Stephen Neuendorffer
• [PATCH 7/7] [POWERPC] Xilinx: Update booting-without-of.   Stephen Neuendorffer
• apm_emulation regression   Benjamin Herrenschmidt
• apm_emulation regression   Benjamin Herrenschmidt
• [PATCH 2/7] [POWERPC] Xilinx: clear data caches.   Benjamin Herrenschmidt
• [PATCH 2/7] [POWERPC] Xilinx: clear data caches.   Benjamin Herrenschmidt
• apm_emulation regression   Rafael J. Wysocki
• [PATCH 2/7] [POWERPC] Xilinx: clear data caches.   Stephen Neuendorffer
• [PATCH] ipic: ack only for edge interrupts   Kumar Gala
• [PATCH 0/6] xics.c and time.c optimizations   Milton Miller
• [PATCH 0/6] xics.c and time.c optimizations   Milton Miller
• [PATCH 1/6] push down or eliminate smp_processor_id in xics   Milton Miller
• [PATCH 2/6] init_decrementer_clockevent can be static __init   Milton Miller
• [PATCH 3/6] use __get_cpu_var in time.c   Milton Miller
• [PATCH 4/6] timer interrupt: use a struct for two per_cpu varables   Milton Miller
• [PATCH 5/6] depend on ->initialized in calc_steal_time   Milton Miller
• any more patches for 2.6.24?   Paul Mackerras
• [PATCH 6/6] optimize account_system_vtime   Milton Miller
• [PATCH] mpc834x_mds: Fix whitespace and call of_platform_bus_probe().   Kumar Gala
• [PATCH 0/15] [POWERPC] PCI updates & merges   Benjamin Herrenschmidt
• [PATCH 1/15] [POWERPC] pci32: remove bogus alignment message   Benjamin Herrenschmidt
• [PATCH 2/15] [POWERPC] pci32: use generic pci_assign_unassign_resources   Benjamin Herrenschmidt
• [PATCH 3/15] [POWERPC] pci32: Remove PowerMac P2P bridge IO hack   Benjamin Herrenschmidt
• [PATCH 4/15] [POWERPC] pci32: Add flags modifying the PCI code behaviour   Benjamin Herrenschmidt
• [PATCH 5/15] [POWERPC] pci32: Remove obsolete PowerMac bus number hack   Benjamin Herrenschmidt
• [PATCH 6/15] [POWERPC] pci32: Add platform option to enable /proc PCI domains   Benjamin Herrenschmidt
• [PATCH 7/15] [POWERPC] Merge pcibios_resource_to_bus/bus_to_resource   Benjamin Herrenschmidt
• [PATCH 8/15] [POWERPC] Merge PCI resource fixups   Benjamin Herrenschmidt
• [PATCH 9/15] [POWERPC] Merge PCI resource allocation & assignment   Benjamin Herrenschmidt
• [PATCH 10/15] [POWERPC] fix iSeries PCI resource management   Benjamin Herrenschmidt
• [PATCH 11/15] [POWERPC] Updates/fixes to 32 bits pcibios_enable_device()   Benjamin Herrenschmidt
• [PATCH 12/15] [POWERPC] Merge 32 and 64 bits pcibios_enable_device   Benjamin Herrenschmidt
• [PATCH 13/15] [POWERPC] Fixup powermac enable device hook   Benjamin Herrenschmidt
• [PATCH 14/15] [POWERPC] Clear pci_probe_only on 64 bits PowerMac   Benjamin Herrenschmidt
• [PATCH 15/15] [POWERPC] Various fixes to pcibios_enable_device()   Benjamin Herrenschmidt
• [PATCH] Fix rounding bug in emulation for double float operating   Kumar Gala
• any more patches for 2.6.24?   Kumar Gala
• Please pull from 'for-2.6.24' branch   Kumar Gala
• [PATCH 2/2] ucc_geth: use rx-clock-name and tx-clock-name device tree properties   Kumar Gala
• [PATCH 4/4] MPC8313 enhanced Local Bus Controller NAND support.   Kumar Gala
• [PATCH 2/3] mpc82xx: Embedded Planet EP8248E support   Kumar Gala
• [PATCH 2/2] powerpc: Add IPIC MSI support   Kumar Gala
• [PATCH] Fix rounding bug in emulation for double floatoperating   Kumar Gala
• Please pull linux-2.6-8xx.git for-paulus branch   Kumar Gala
• [PATCH 19/20] [POWERPC] pci32: 4xx embedded platforms want to reassign all PCI resources   Stefan Roese
• [DTC][PATCH] Fix cross-compile building   Kumar Gala
• [PATCH] Fix rounding bug in emulation for double floatoperating   Zang Roy-r61911
• [PATCH] Fix rounding bug in emulation for double floatoperating   Kumar Gala
• [PATCH 2/2] ucc_geth: use rx-clock-name and tx-clock-name device tree properties   Jeff Garzik
• [PATCH 2/2] ucc_geth: use rx-clock-name and tx-clock-name device tree properties   Kumar Gala
• Please pull from 'for-2.6.25' branch   Kumar Gala
• [PATCH 1/7] bootwrapper: Add a firmware-independent "raw" target.   Milton Miller
• [PATCH] [POWERPC] pasemi: export pasemi_dma_init()   Olof Johansson
• [PATCH] [POWERPC] Emulate isel (Integer Select) instruction   Kumar Gala
• [PATCH] [POWERPC] Emulate isel (Integer Select) instruction   Olof Johansson
• [PATCH] add MPC837x MDS board default device tree   Kumar Gala
• [PATCH] [POWERPC] Emulate isel (Integer Select) instruction   Olof Johansson
• [PATCH] [POWERPC] Emulate isel (Integer Select) instruction   Olof Johansson
• [PATCH v2 2/4] [libata] pata_of_platform: OF-Platform PATA device driver   Olof Johansson
• [PATCH] add MPC837x MDS board default device tree   Li Yang
• [PATCH 4/15] [POWERPC] pci32: Add flags modifying the PCI code behaviour   Olof Johansson
• [PATCH 2/2] powerpc: Add IPIC MSI support   Li Tony
• [PATCH 2/2] powerpc: Add IPIC MSI support   Kumar Gala
• [PATCH 4/15] [POWERPC] pci32: Add flags modifying the PCI code behaviour   Benjamin Herrenschmidt
• [PATCH] Fix build break caused by "ide: remove ideprobe_init()"   Olof Johansson
• [PATCH 2/2] powerpc: Add IPIC MSI support   Li Li
• [PATCH 2/2] powerpc: Add IPIC MSI support   Jin Zhengxiong
• [PATCH 2/2] powerpc: Add IPIC MSI support   Michael Ellerman
• any more patches for 2.6.24?   Étienne Bersac
• apm_emulation regression   Johannes Berg
• [PATCH] OProfile: remove dependency on spufs module   Arnd Bergmann
• [PATCH 1/7] bootwrapper: Add a firmware-independent "raw" target.   Grant Likely
• [PATCH 2/3] mpc82xx: Embedded Planet EP8248E support   Scott Wood
• [PATCH v2 2/4] [libata] pata_of_platform: OF-Platform PATA device driver   Scott Wood
• [PATCH 2/3] mpc82xx: Embedded Planet EP8248E support   Kumar Gala
• [PATCH v2 2/4] [libata] pata_of_platform: OF-Platform PATA device driver   Olof Johansson
• [PATCH 05/10] powerpc: Add crash kernel support for 85xx   Kumar Gala
• [PATCH 05/10] powerpc: Add crash kernel support for 85xx   Dale Farnsworth
• [PATCH 1/7] bootwrapper: Add a firmware-independent "raw" target.   Stephen Neuendorffer
• [PATCH v3 0/3] OF-platform PATA driver   Anton Vorontsov
• [PATCH 2/3] mpc82xx: Embedded Planet EP8248E support   Scott Wood
• [PATCH 1/3] [libata] pata_platform: make probe and remove functions device type neutral   Anton Vorontsov
• [PATCH 2/3] [libata] pata_of_platform: OF-Platform PATA device driver   Anton Vorontsov
• [PATCH 3/3] [POWERPC] MPC8349E-mITX: introduce localbus and pata nodes   Anton Vorontsov
• [PATCH] [POWERPC] booting-without-of: localbus should not include board name   Anton Vorontsov
• [PATCH v2 4/4] Freescale enhanced Local Bus Controller FCM NAND support.   Scott Wood
• [PATCH v2 2/4] mpc8313erdb: Add NAND to device tree, and call of_platform_bus_probe().   Scott Wood
• [PATCH v2 4/4] Freescale enhanced Local Bus Controller FCM NAND support.   Anton Vorontsov
• [PATCH v2 4/4] Freescale enhanced Local Bus Controller FCM NAND support.   Scott Wood
• [PATCH v2 4/4] Freescale enhanced Local Bus Controller FCM NAND support.   Anton Vorontsov
• [PATCH 8/8] gianfar: Magic Packet and suspend/resume support.   Jeff Garzik
• [PATCH v2 4/4] Freescale enhanced Local Bus Controller FCM NAND support.   Arnd Bergmann
• [PATCH 1/8] powerpc: prpmc2800 - Convert dts file to v1   David Gibson
• [PATCH 2/3] mpc82xx: Embedded Planet EP8248E support   David Gibson
• [PATCH v3 4/4] Freescale enhanced Local Bus Controller FCM NAND support.   Scott Wood
• Fix Firmware class name collision   Greg KH
• Fix Firmware class name collision   Timur Tabi
• apm_emulation regression   Rafael J. Wysocki
• [PATCH v3 4/4] Freescale enhanced Local Bus Controller FCM NAND support.   Josh Boyer
• [PATCH v3 4/4] Freescale enhanced Local Bus Controller FCM NAND support.   Nathan Lynch
• [PATCH 2/4] mpc8313erdb: Add NAND to device tree, and call of_platform_bus_probe().   David Gibson
• [PATCH v2 2/4] mpc8313erdb: Add NAND to device tree, and call of_platform_bus_probe().   David Gibson
• [PATCH 6/6] optimize account_system_vtime   Michael Neuling
• [PATCH v3 4/4] Freescale enhanced Local Bus Controller FCM NAND support.   David Gibson
• [PATCH v2 2/4] mpc8313erdb: Add NAND to device tree, and call of_platform_bus_probe().   Scott Wood
• [PATCH v3 4/4] Freescale enhanced Local Bus Controller FCM NAND support.   Scott Wood
• Fix Firmware class name collision   Benjamin Herrenschmidt
• [PATCH 03/10] powerpc: Add kexec support for PPC_85xx platforms   Benjamin Herrenschmidt
• [PATCH 07/10] powerpc: Implement kmap_atomic_pfn on powerpc   Benjamin Herrenschmidt
• Fix Firmware class name collision   Greg KH
• [PATCH] [POWERPC] 4xx: Add aliases node to 4xx dts files   Stefan Roese
• [PATCH] [POWERPC] 4xx: Change Kilauea PCIe bus ranges in dts file   Stefan Roese
• [PATCH 2/3] [libata] pata_of_platform: OF-Platform PATA device driver   Stephen Rothwell
• [PATCH 2/3] [libata] pata_of_platform: OF-Platform PATA device driver   Anton Vorontsov
• Fix Firmware class name collision   Kay Sievers
• [PATCH] [POWERPC][RFC] MPC8360E-RDK: Device tree and board file   Anton Vorontsov
• [PATCH] [POWERPC] 4xx: Add aliases node to 4xx dts files   David Gibson
• [PATCH] [POWERPC] FSL: enet device tree cleanups   David Gibson
• [PATCH 2/3] mpc82xx: Embedded Planet EP8248E support   David Gibson
• [PATCH 1/5] PowerPC 74xx: Katana Qp device tree   David Gibson
• [PATCH RFC 0/7] "NAND on UPM" and related patches   David Gibson
• Device Tree updates for xilinx.   David Gibson
• [PATCH 1/2] [RESEND] ps3: vuart: fix error path locking   Daniel Walker
• [PATCH 1/7] bootwrapper: Add a firmware-independent "raw" target.   David Gibson
• [PATCH 1/3] [libata] pata_platform: make probe and remove functions device type neutral   Paul Mundt
• [MPC5200] problem running FEC and ATA   Arnon Kaufman
• Device Tree updates for xilinx.   Josh Boyer
• [PATCH] [POWERPC] 4xx: Add aliases node to 4xx dts files   Josh Boyer
• [MPC5200] problem running FEC and ATA   Robert Schwebel
• [PATCH 2/3] mpc82xx: Embedded Planet EP8248E support   Scott Wood
• [MPC5200] problem running FEC and ATA   Arnon Kaufman
• [MPC5200] problem running FEC and ATA   Robert Schwebel
• [PATCH] [POWERPC] 4xx: Add aliases node to 4xx dts files   Segher Boessenkool
• [PATCH] [POWERPC] 4xx: Add aliases node to 4xx dts files   Josh Boyer
• [PATCH] [POWERPC] 4xx: Add aliases node to 4xx dts files   David Gibson
• [PATCH] [POWERPC] 4xx: Add aliases node to 4xx dts files   David Gibson
• [PATCH] [POWERPC] 4xx: Add aliases node to 4xx dts files   Segher Boessenkool
• [PATCH] [POWERPC] 4xx: Add aliases node to 4xx dts files   David Gibson
• [PATCH] Fix sleep on powerbook 3400   Paul Mackerras
• [PATCH 1/2] wrapper: rename offset in offset_devp().   David Gibson
• [PATCH 1/2] wrapper: rename offset in offset_devp().   David Gibson
• libfdt: Add more documentation (patch the sixth)   David Gibson
• libfdt: Add more documentation (patch the seventh)   David Gibson
• [PATCH v2 1/3] 8xx: Analogue & Micro Adder875 board support.   David Gibson
• [PATCH v2 2/3] mpc82xx: Embedded Planet EP8248E support   David Gibson
• [PATCH 7/7] [POWERPC] Xilinx: Update booting-without-of.   David Gibson
• [PATCH 7/7] [POWERPC] Xilinx: Update booting-without-of.   Grant Likely
• [PATCH 7/7] [POWERPC] Xilinx: Update booting-without-of.   Stephen Neuendorffer
• Device Tree updates for xilinx.   Stephen Neuendorffer
• [PATCH] [POWERPC][RFC] MPC8360E-RDK: Device tree and board file   David Gibson
• Device Tree updates for xilinx.   David Gibson
• [DTC][PATCH] Fix cross-compile building   David Gibson
• dtc: Don't build tests as part of "all"   David Gibson
• [PATCH 2/3] arch/ : Platform changes for UCC TDM driver for MPC8323ERDB.Also includes related QE changes.   Poonam Aggrwal
• [PATCH 2/2] wrapper: Treat NULL as root node in devp_offset; add devp_offset_find().   David Gibson
• [PATCH 2/3] arch/ : Platform changes for UCC TDM driver for MPC8323ERDB.Also includes related QE changes.   Aggrwal Poonam
• Please pull powerpc.git merge branch   Paul Mackerras
• Device Tree updates for xilinx.   Stephen Neuendorffer
• [PATCH] Implement pci_set_dma_mask() in terms of the dma_ops   Michael Ellerman
• [PATCH] OProfile: remove dependency on spufs module   Jeremy Kerr
• [PATCH] Implement pci_set_dma_mask() in terms of the dma_ops   Christoph Hellwig
• [PATCH] [NET][POWERPC] ucc_geth: really fix section mismatch   Anton Vorontsov
• [PATCH 7/7] [POWERPC] Xilinx: Update booting-without-of.   Peter Korsgaard
• [PATCH] [POWERPC] 4xx: Add aliases node to 4xx dts files   Jon Loeliger
• Various DTC Patches Applied   Jon Loeliger
• [PATCH v2 1/3] 8xx: Analogue & Micro Adder875 board support.   Scott Wood
• [PATCH v2 2/3] mpc82xx: Embedded Planet EP8248E support   Scott Wood
• [PATCH 7/7] [POWERPC] Xilinx: Update booting-without-of.   Grant Likely
• [PATCH 7/7] [POWERPC] Xilinx: Update booting-without-of.   Grant Likely
• [RFC] ehea: kdump support - rework   Thomas Klein
• [PATCH] [POWERPC][RFC] MPC8360E-RDK: Device tree and board file   Scott Wood
• [PATCH] [POWERPC][RFC] MPC8360E-RDK: Device tree and board file   Kim Phillips
• [PATCH] [POWERPC][RFC] MPC8360E-RDK: Device tree and board file   Scott Wood
• [PATCH] [POWERPC][RFC] MPC8360E-RDK: Device tree and board file   Kim Phillips
• [PATCH 7/7] [POWERPC] Xilinx: Update booting-without-of.   Stephen Neuendorffer
• [PATCH] [POWERPC][RFC] MPC8360E-RDK: Device tree and board file   Vitaly Bordug
• [PATCH 7/7] [POWERPC] Xilinx: Update booting-without-of.   Grant Likely
• 1st version of azfs   Maxim Shchetynin
• 1st version of azfs   Maxim Shchetynin
• [PATCH] [POWERPC][RFC] MPC8360E-RDK: Device tree and board file   Scott Wood
• 1st version of azfs   Dave Hansen
• 1st version of azfs   Jan Engelhardt
• [PATCH] arch/powerpc/: Spelling fixes   Joe Perches
• [PATCH] include/asm-powerpc/: Spelling fixes   Joe Perches
• [PATCH] arch/ppc/: Spelling fixes   Joe Perches
• [PATCH] include/asm-ppc/: Spelling fixes   Joe Perches
• [PATCH] arch/powerpc/: Spelling fixes   Josh Boyer
• [PATCH] drivers/net/: Spelling fixes   Joe Perches
• [PATCH] drivers/usb/: Spelling fixes   Joe Perches
• [PATCH] arch/ppc/: Spelling fixes   Vitaly Bordug
• [PATCH] drivers/net/: Spelling fixes   John W. Linville
• [PATCH] arch/ppc/: Spelling fixes   Joe Perches
• [PATCH] Fix build break caused by "ide: remove ideprobe_init()"   Bartlomiej Zolnierkiewicz
• [PATCH] [POWERPC][RFC] MPC8360E-RDK: Device tree and board file   Vitaly Bordug
• [PATCH] drivers/net/: Spelling fixes   Stefano Brivio
• [PATCH] [NET][POWERPC] ucc_geth: really fix section mismatch   Jeff Garzik
• [PATCH] drivers/net/: Spelling fixes   Joe Perches
• [PATCH] drivers/net/: Spelling fixes   David Woodhouse
• 1st version of azfs   Bodo Eggert
• [PATCH] Fix build break caused by "ide: remove ideprobe_init()"   Olof Johansson
• [PATCH] [POWERPC] holly.c: Remove unneccessary include of linux/ide.h   Olof Johansson
• [PATCH/RFC] [POWERPC] Add fixed-phy support for fs_enet   Jeff Garzik
• [PATCH] [POWERPC] pasemi: export pasemi_dma_init()   Jeff Garzik
• [PATCH] [POWERPC] pasemi: export pasemi_dma_init()   Olof Johansson
• [PATCH] [POWERPC] holly.c: Remove unneccessary include of linux/ide.h   Josh Boyer
• [PATCH 7/7] [POWERPC] Xilinx: Update booting-without-of.   Stephen Neuendorffer
• [PATCH 7/7] [POWERPC] [v2] Xilinx: Update booting-without-of.   Stephen Neuendorffer
• [PATCH] Implement pci_set_dma_mask() in terms of the dma_ops   Benjamin Herrenschmidt
• [PATCH v2 1/3] 8xx: Analogue & Micro Adder875 board support.   David Gibson
• [PATCH v2 2/3] mpc82xx: Embedded Planet EP8248E support   David Gibson
• [PATCH] [POWERPC] pasemi: export pasemi_dma_init()   Jeff Garzik
• [PATCH 0/7] Series to add device tree naming to i2c   Jon Smirl
• [PATCH 1/7] Copy mpc-i2c to preserve support for ARCH=ppc and allow changes on ARCH=powerpc   Jon Smirl
• [PATCH 2/7] Implement module aliasing for i2c to translate from device tree names   Jon Smirl
• [PATCH 3/7] Modify several rtc drivers to use the alias names list property of i2c   Jon Smirl
• [PATCH 4/7] Clean up error returns   Jon Smirl
• [PATCH 5/7] Convert PowerPC MPC i2c to of_platform_driver from platform_driver   Jon Smirl
• [PATCH 6/7] Convert pfc8563 i2c driver from old style to new style   Jon Smirl
• [PATCH 7/7] Makefile   Jon Smirl
• [PATCH] update module-init-tools to support the i2c subsystem   Jon Smirl
• [PATCH 7/7] Makefile   Jon Smirl
• Raising list size limit   Stephen Rothwell
• [PATCH] [POWERPC][RFC] MPC8360E-RDK: Device tree and board file   David Gibson
• dtc: Remove remaining old-style checks   David Gibson
• [0/2] Merge dtc   David Gibson
• [1/2] Merge dtc upstream source   David Gibson
• [2/2] Use embedded dtc in kernel builds   David Gibson
• [PATCH] Platform Changes for UCC TDM driver for MPC8323ERDB. Also includes related QE changes.   Poonam_Aggrwal-b10812
• [PATCH/RFC] [POWERPC] Add fixed-phy support for fs_enet   Jochen Friedrich
• [MPC5200] problem running FEC and ATA   Juergen Beisert
• [PATCH] Fix sleep on powerbook 3400   Johannes Berg
• Raising list size limit   Josh Boyer
• dtc: Remove remaining old-style checks   Jon Loeliger
• [PATCH/RFC] [POWERPC] Add fixed-phy support for fs_enet   Vitaly Bordug
• [PATCH] [POWERPC] Add fixed-phy support for fs_enet   Jochen Friedrich
• [PATCH] [POWERPC][RFC] MPC8360E-RDK: Device tree and board file   Kumar Gala
• [PATCH 1/7] Copy mpc-i2c to preserve support for ARCH=ppc and allow changes on ARCH=powerpc   Kumar Gala
• Raising list size limit   Kumar Gala
• [PATCH v2 1/3] 8xx: Analogue & Micro Adder875 board support.   Scott Wood
• Raising list size limit   Olof Johansson
• [PATCH 03/10] powerpc: Add kexec support for PPC_85xx platforms   Dale Farnsworth
• [PATCH v2 2/3] mpc82xx: Embedded Planet EP8248E support   Scott Wood
• [PATCH] [POWERPC][RFC] MPC8360E-RDK: Device tree and board file   Scott Wood
• [PATCH 07/10] powerpc: Implement kmap_atomic_pfn on powerpc   Dale Farnsworth
• Raising list size limit   Josh Boyer
• [PATCH 1/5] PowerPC 74xx: Katana Qp device tree   Dale Farnsworth
• [PATCH 07/10] powerpc: Implement kmap_atomic_pfn on powerpc   Kumar Gala
• [PATCH] [POWERPC][RFC] MPC8360E-RDK: Device tree and board file   Anton Vorontsov
• [POWERPC 00/18] cell patches for 2.6.25   arnd at arndb.de
• [POWERPC 01/18] perfmon2: make pm_interval register read/write   arnd at arndb.de
• [POWERPC 02/18] OProfile: fix cbe pm signal routing problem   arnd at arndb.de
• [POWERPC 03/18] cell: add missing \n   arnd at arndb.de
• [POWERPC 04/18] Set archdata.dma_data for direct DMA in cell_dma_dev_setup()   arnd at arndb.de
• [POWERPC 05/18] Add celleb_dma_dev_setup()   arnd at arndb.de
• [POWERPC 06/18] Use archdata.dma_data in dma_direct_ops   arnd at arndb.de
• [POWERPC 07/18] Have cell use its own dma_direct_offset variable   arnd at arndb.de
• [POWERPC 08/18] Have celleb use its own dma_direct_offset variable   arnd at arndb.de
• [POWERPC 09/18] Remove the global dma_direct_offset   arnd at arndb.de
• [POWERPC 10/18] Remove bogus comment in dma_direct_alloc_coherent()   arnd at arndb.de
• [POWERPC 11/18] cell: Convert #include of asm/of_{platform, device}.h into linux/of_{platform, device}.h.   arnd at arndb.de
• [POWERPC 12/18] cell: export force_sig_info()   arnd at arndb.de
• [POWERPC 13/18] cell: safer of_has_vicinity routine   arnd at arndb.de
• [POWERPC 14/18] cell: handle kernel SLB setup in spu_base.c   arnd at arndb.de
• [POWERPC 15/18] cell: use spu_load_slb for SLB setup   arnd at arndb.de
• [POWERPC 16/18] cell: add spu_64k_pages_available() check   arnd at arndb.de
• [POWERPC 17/18] cell: handle SPE kernel mappings that cross segment boundaries   arnd at arndb.de
• [POWERPC 18/18] cell: catch errors from sysfs_create_group()   arnd at arndb.de
• [POWERPC 04/18] Set archdata.dma_data for direct DMA in cell_dma_dev_setup()   Benjamin Herrenschmidt
• [POWERPC 05/18] Add celleb_dma_dev_setup()   Benjamin Herrenschmidt
• [POWERPC 06/18] Use archdata.dma_data in dma_direct_ops   Benjamin Herrenschmidt
• [POWERPC 07/18] Have cell use its own dma_direct_offset variable   Benjamin Herrenschmidt
• [POWERPC 08/18] Have celleb use its own dma_direct_offset variable   Benjamin Herrenschmidt
• [POWERPC 09/18] Remove the global dma_direct_offset   Benjamin Herrenschmidt
• [POWERPC 10/18] Remove bogus comment in dma_direct_alloc_coherent()   Benjamin Herrenschmidt
• [POWERPC 00/18] cell patches for 2.6.25   Arnd Bergmann
• ppc405 in EDK9.2   Stephen Neuendorffer
• [PATCH 1/8] powerpc: prpmc2800 - Convert dts file to v1   Mark A. Greer
• [PATCH] Fix sleep on powerbook 3400   Paul Mackerras
• Raising list size limit   David Gibson
• [PATCH 1/8] powerpc: prpmc2800 - Convert dts file to v1   David Gibson
• [PATCH] [POWERPC][RFC] MPC8360E-RDK: Device tree and board file   David Gibson
• Raising list size limit   Stephen Rothwell
• dtc: Add missing copyright notice for dumptrees.c   David Gibson
• [POWERPC 00/18] cell patches for 2.6.25   Arnd Bergmann
• [PATCH 1/3] ps3: vuart: fix error path locking   Andrew Morton
• [PATCH 1/3] ps3: vuart: fix error path locking   Daniel Walker
• [PATCH 1/3] ps3: vuart: fix error path locking   Geoff Levand
• dtc: Update TODO files   David Gibson
• [PATCH] powerpc: Add MPC837x PCIE RC mode support   Li Li
• [patch] mpc83xx: Add MPC837x PCIE controller RC mode support   Li Li
• [PATCH 0/2] ps3fb bug fixes for 2.6.24   Geert Uytterhoeven
• [PATCH 1/2] ps3fb: Update for firmware 2.10   Geert Uytterhoeven
• [PATCH 2/2] ps3fb: Fix ps3fb free_irq() dev_id   Geert Uytterhoeven
• [PATCH] [POWERPC][RFC] MPC8360E-RDK: Device tree and board file   Anton Vorontsov
• [PATCH 11/20] [POWERPC] Wire up PCI on Bamboo board   Valentine Barshak
• Linux on Freescale e200   Per-Erik Johansson
• dtc: Add missing copyright notice for dumptrees.c   Jon Loeliger
• dtc: Update TODO files   Jon Loeliger
• mg1264 and mpc5200   S. Fricke
• [PATCH] [POWERPC][RFC] MPC8360E-RDK: Device tree and board file   Scott Wood
• [RFC] Merge mkimage tool   Josh Boyer
• [RFC] [PATCH 1/3] Merge mkimage tool for building uImages   Josh Boyer
• [PATCH] [POWERPC][RFC] MPC8360E-RDK: Device tree and board file   Anton Vorontsov
• [RFC] [PATCH 3/3] Remove mkuboot.sh script   Josh Boyer
• [RFC] [PATCH 2/3] Rework arch specific Makefiles to use mkimage   Josh Boyer
• Linux on Freescale e200   Kumar Gala
• [PATCH 11/20] [POWERPC] Wire up PCI on Bamboo board   Benjamin Herrenschmidt
• [PATCH 0/4] device_type/compatible cleanups   Scott Wood
• [PATCH 0/4] device_type/compatible cleanups   Anton Vorontsov
• [PATCH 1/4] [POWERPC] qe_lib and users: get rid of device_type and model   Anton Vorontsov
• [PATCH 2/4] [POWERPC][NET] ucc_geth_mii and users: get rid of device_type   Anton Vorontsov
• [PATCH 3/4] [POWERPC][SPI] use brg-frequency for SPI in QE   Anton Vorontsov
• [PATCH 4/4] [POWERPC] fsl_spi_init and users: stop using device_type = "spi"   Anton Vorontsov
• [PATCH 0/4] device_type/compatible cleanups   Anton Vorontsov
• [PATCH 4/4] [POWERPC] fsl_spi_init and users: stop using device_type = "spi"   Kumar Gala
• [PATCH 3/4] [POWERPC][SPI] use brg-frequency for SPI in QE   Scott Wood
• [PATCH] [POWERPC][RFC] MPC8360E-RDK: Device tree and board file   Anton Vorontsov
• [PATCH 4/4] [POWERPC] fsl_spi_init and users: stop using device_type = "spi"   Anton Vorontsov
• [PATCH 4/4] [POWERPC] fsl_spi_init and users: stop using device_type = "spi"   Timur Tabi
• [PATCH 0/4] device_type/compatible cleanups   Scott Wood
• [PATCH 4/4] [POWERPC] fsl_spi_init and users: stop using device_type = "spi"   Anton Vorontsov
• [PATCH 4/4] [POWERPC] fsl_spi_init and users: stop using device_type = "spi"   Timur Tabi
• [PATCH 4/4] [POWERPC] fsl_spi_init and users: stop using device_type = "spi"   Grant Likely
• Oops: Kernel access of bad area   Christian Kujau
• Linux on Freescale e200   Per-Erik Johansson
• [PATCH v2] powerpc: add hugepagesz boot-time parameter   Jon Tollefson
• [0/3] Add RapidIO support to powerpc architecture with memory mapping   Randy Vinson
• [PATCH 3/4] [POWERPC][SPI] use brg-frequency for SPI in QE   Stephen Rothwell
• [PATCH 4/4] [POWERPC] fsl_spi_init and users: stop using device_type = "spi"   Olof Johansson
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• hangs after "Freeing unused kernel memory"   Siva Prasad
• [0/3] Add RapidIO support to powerpc architecture with memory mapping   Zhang Wei
• [PATCH] pata_of_platform: Move electra-ide support over to new framework   Paul Mackerras
• [PATCH 0/19] [POWERPC] PCI updates & merges   Benjamin Herrenschmidt
• [PATCH 1/19] [POWERPC] pci32: remove bogus alignment message   Benjamin Herrenschmidt
• [PATCH 2/19] [POWERPC] pci32: use generic pci_assign_unassign_resources   Benjamin Herrenschmidt
• [PATCH 3/19] [POWERPC] pci32: Remove PowerMac P2P bridge IO hack   Benjamin Herrenschmidt
• [PATCH 4/19] [POWERPC] pci32: Add flags modifying the PCI code behaviour   Benjamin Herrenschmidt
• [PATCH 5/19] [POWERPC] pci32: Remove obsolete PowerMac bus number hack   Benjamin Herrenschmidt
• [PATCH 6/19] [POWERPC] pci32: Add platform option to enable /proc PCI domains   Benjamin Herrenschmidt
• [PATCH 7/19] [POWERPC] Merge pcibios_resource_to_bus/bus_to_resource   Benjamin Herrenschmidt
• [PATCH 8/19] [POWERPC] Merge PCI resource fixups   Benjamin Herrenschmidt
• [PATCH 9/19] [POWERPC] Merge PCI resource allocation & assignment   Benjamin Herrenschmidt
• [PATCH 10/19] [POWERPC] fix iSeries PCI resource management   Benjamin Herrenschmidt
• [PATCH 11/19] [POWERPC] Updates/fixes to 32 bits pcibios_enable_device()   Benjamin Herrenschmidt
• [PATCH 12/19] [POWERPC] Merge 32 and 64 bits pcibios_enable_device   Benjamin Herrenschmidt
• [PATCH 13/19] [POWERPC] Fixup powermac enable device hook   Benjamin Herrenschmidt
• [PATCH 14/19] [POWERPC] Clear pci_probe_only on 64 bits PowerMac   Benjamin Herrenschmidt
• [PATCH 15/19] [POWERPC] Various fixes to pcibios_enable_device()   Benjamin Herrenschmidt
• [PATCH 16/19] [POWERPC] Enable self-view of the HT host bridge on PowerMac G5   Benjamin Herrenschmidt
• [PATCH 17/19] [POWERPC] Improve resource setup of PowerMac G5 HT bridge   Benjamin Herrenschmidt
• [PATCH 18/19] [POWERPC] Fixup skipping of PowerMac PCI<->PCI bridge "closed" resources   Benjamin Herrenschmidt
• [PATCH 19/19] [POWERPC] Disable PCI IO/Mem on a device when resources can't be allocated   Benjamin Herrenschmidt
• [PATCH] [POWERPC] Fix for via-pmu based backlight control   Benjamin Herrenschmidt
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Olof Johansson
• [PATCH] [POWERPC] Fix PCI IRQ fallback code to not map IRQ 0   Benjamin Herrenschmidt
• tiny login   pjmaiya
• [PATCH v2] powerpc: add hugepagesz boot-time parameter   David Gibson
• [PATCH 0/5] Version 17, series to add device tree naming to i2c   Jon Smirl
• [PATCH 1/5] Implement module aliasing for i2c to translate from device tree names   Jon Smirl
• [PATCH 2/5] Modify several rtc drivers to use the alias names list property of i2c   Jon Smirl
• [PATCH 3/5] Clean up error returns   Jon Smirl
• [PATCH 4/5] Convert PowerPC MPC i2c to of_platform_driver from platform_driver   Jon Smirl
• [PATCH 5/5] Convert pfc8563 i2c driver from old style to new style   Jon Smirl
• [PATCH 4/5] Convert PowerPC MPC i2c to of_platform_driver from platform_driver   David Gibson
• [PATCH 4/5] Convert PowerPC MPC i2c to of_platform_driver from platform_driver   Olof Johansson
• [PATCH 4/5] Convert PowerPC MPC i2c to of_platform_driver from platform_driver   Stefan Roese
• [PATCH] [RFC] Xilinx SystemACE: Add media hotplug support   Grant Likely
• [PATCH] [RFC] Xilinx SystemACE: Add media hotplug support   Grant Likely
• tiny login   Clemens Koller
• More patches added to for-2.6.25 and master branches of powerpc.git   Paul Mackerras
• [PATCH -mm 10/43] powerpc user_regset fpregs   Roland McGrath
• [PATCH -mm 11/43] powerpc user_regset altivec   Roland McGrath
• [PATCH -mm 12/43] powerpc user_regset spe   Roland McGrath
• [PATCH -mm 13/43] powerpc ptrace special regs   Roland McGrath
• [PATCH -mm 14/43] powerpc user_regset gpr   Roland McGrath
• [PATCH -mm 15/43] powerpc user_regset_view   Roland McGrath
• [PATCH -mm 16/43] powerpc user_regset compat   Roland McGrath
• [PATCH -mm 17/43] powerpc CORE_DUMP_USE_REGSET   Roland McGrath
• [PATCH -mm 18/43] powerpc compat_binfmt_elf   Roland McGrath
• [PATCH -mm 19/43] powerpc core dump cleanup   Roland McGrath
• [PATCH -mm 20/43] powerpc SPE core dump   Roland McGrath
• [PATCH -mm 21/43] powerpc ptrace user_regset   Roland McGrath
• [PATCH -mm 22/43] powerpc ptrace generic peekdata/pokedata   Roland McGrath
• [PATCH -mm 23/43] powerpc compat_ptrace_request   Roland McGrath
• [PATCH -mm 24/43] powerpc compat_sys_ptrace   Roland McGrath
• [PATCH -mm 25/43] powerpc ptrace32 user_regset   Roland McGrath
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Takashi Iwai
• [PATCH/.24] [NET] fs_enet: check for phydev existence in the ethtool handlers   Anton Vorontsov
• [PATCH] IB/ehca: Forward event client-reregister-required to registered clients   Hoang-Nam Nguyen
• PPC64 doesn't compile with CONFIG_SMP=n   Egor Starkov
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [PATCH] [RFC] Xilinx SystemACE: Add media hotplug support   Andy Whitcroft
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Jon Loeliger
• [PATCH/.24] [NET] fs_enet: check for phydev existence in the ethtool handlers   Vitaly Bordug
• [PATCH 0/4] arch/powerpc support for SBC8560 board   Paul Gortmaker
• [PATCH 1/4] sbc8560: add basic support for Wind River SBC8560 as powerpc   Paul Gortmaker
• [PATCH 2/4] CPM2: Make support for the CPM2 optional on 8560 based boards   Paul Gortmaker
• [PATCH 3/4] sbc8560: Add device tree source for Wind River SBC8560 board   Paul Gortmaker
• [PATCH 4/4] sbc8560: Add default .config file for Wind River SBC8560   Paul Gortmaker
• 2.6.25-candidates branch updated in 4xx tree   Josh Boyer
• [PATCH] pata_of_platform: Move electra-ide support over to new framework   Olof Johansson
• [PATCH] [RFC] Xilinx SystemACE: Add media hotplug support   Grant Likely
• [PATCH 4/5] Convert PowerPC MPC i2c to of_platform_driver from platform_driver   Jon Smirl
• More patches added to for-2.6.25 and master branches of powerpc.git   Scott Wood
• [DTC PATCH 1/2] Add yyerrorf() for formatted error messages.   Scott Wood
• [DTC PATCH 2/2] Add support for binary includes.   Scott Wood
• [patch/rfc 3/7] ps3: Use the HVs storage device notification mechanism properly   Geert Uytterhoeven
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [PATCH v3 2/2] mpc82xx: Embedded Planet EP8248E support   Scott Wood
• [PATCH 1/3] ps3: vuart: fix error path locking   Daniel Walker
• [RESEND DTC PATCH 2/2] Add support for binary includes.   Scott Wood
• [PATCH 0/2] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [PATCH 1/2] [POWERPC] Update MPC8610 HPCD to support audio drivers   Timur Tabi
• [PATCH 2/2] [ALSA] Add ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [PATCH 1/3] ps3: vuart: fix error path locking   Andrew Morton
• [PATCH 1/3] ps3: vuart: fix error path locking   Daniel Walker
• [PATCH 11/20] [POWERPC] Wire up PCI on Bamboo board   Valentine Barshak
• [PATCH v2 0/4] device_type/compatible cleanups   Anton Vorontsov
• [PATCH v2 1/4] [POWERPC] qe_lib and users: get rid of device_type and model   Anton Vorontsov
• [PATCH v2 2/4] [POWERPC][NET] ucc_geth_mii and users: get rid of device_type   Anton Vorontsov
• [PATCH v2 3/4] [POWERPC][SPI] use brg-frequency for SPI in QE   Anton Vorontsov
• [PATCH v2 4/4] [POWERPC] fsl_spi_init and users: stop using device_type = "spi"   Anton Vorontsov
• [PATCH 11/20] [POWERPC] Wire up PCI on Bamboo board   Benjamin Herrenschmidt
• Oops: Kernel access of bad area   Nathan Lynch
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Jon Smirl
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Jon Smirl
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Olof Johansson
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Scott Wood
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Scott Wood
• [spi-devel-general] [PATCH v2 3/4] [POWERPC][SPI] use brg-frequency for SPI in QE   David Brownell
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Jon Smirl
• [PATCH 1/4] sbc8560: add basic support for Wind River SBC8560 as powerpc   Stephen Rothwell
• More patches added to for-2.6.25 and master branches of powerpc.git   Michael Neuling
• patch pci-fix-bus-resource-assignment-on-32-bits-with-64b-resources.patch added to gregkh-2.6 tree   gregkh at suse.de
• patch pci-fix-warning-in-setup-res.c-on-32-bit-platforms-with-64-bit-resources.patch added to gregkh-2.6 tree   gregkh at suse.de
• [PATCH v2 3/4] [POWERPC][SPI] use brg-frequency for SPI in QE   Anton Vorontsov
• [PATCH 1/4] sbc8560: add basic support for Wind River SBC8560 as powerpc   Kumar Gala
• [PATCH 0/4] arch/powerpc support for SBC8560 board   Kumar Gala
• [PATCH 3/4] sbc8560: Add device tree source for Wind River SBC8560 board   Kumar Gala
• patch pci-fix-bus-resource-assignment-on-32-bits-with-64b-resources.patch added to gregkh-2.6 tree   Benjamin Herrenschmidt
• [PATCH 0/4] arch/powerpc support for SBC8560 board   Kumar Gala
• [PATCH 3/4] sbc8560: Add device tree source for Wind River SBC8560 board   David Gibson
• [PATCH 0/5] Version 17, series to add device tree naming to i2c   Jon Smirl
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   David Gibson
• [PATCH 0/4] arch/powerpc support for SBC8560 board   Paul Gortmaker
• [DTC PATCH 1/2] Add yyerrorf() for formatted error messages.   David Gibson
• patch pci-fix-bus-resource-assignment-on-32-bits-with-64b-resources.patch added to gregkh-2.6 tree   Greg KH
• [RESEND DTC PATCH 2/2] Add support for binary includes.   David Gibson
• [PATCH v3 2/2] mpc82xx: Embedded Planet EP8248E support   David Gibson
• Enable RTC for Ebony and Walnut   David Gibson
• [PATCH 0/4] arch/powerpc support for SBC8560 board   Paul Gortmaker
• [PATCH] [POWERPC] Fix possible NULL deref in ppc32 PCI   Benjamin Herrenschmidt
• [PATCH] [POWERPC] Add EHEA and EHCA as modules in the ppc64_defconfig   Stephen Rothwell
• [PATCH 0/4] arch/powerpc support for SBC8560 board   David Gibson
• [PATCH] [POWERPC] The builtin matches for ibmebus.c can be __initdata   Stephen Rothwell
• [PATCH] [POWERPC] constify the of_device_id passed to of_platform_bus_probe   Stephen Rothwell
• [PATCH] [POWERPC] pointers marked as __iomem do not need to be volatile   Stephen Rothwell
• [PATCH] [POWERPC] Make non-PCI build work again   Stephen Rothwell
• [PATCH 1/21] [POWERPC] Reworking machine check handling and Fix 440/440A   Benjamin Herrenschmidt
• [PATCH 2/21] [POWERPC] Improve support for 4xx indirect DCRs   Benjamin Herrenschmidt
• [PATCH 3/21] [POWERPC] 4xx PLB to PCI-X support   Benjamin Herrenschmidt
• [PATCH 4/21] [POWERPC] 4xx PLB to PCI 2.x support   Benjamin Herrenschmidt
• [PATCH 5/21] [POWERPC] 4xx PLB to PCI Express support   Benjamin Herrenschmidt
• [PATCH 6/21] [POWERPC] PCI support for 4xx Ebony board   Benjamin Herrenschmidt
• [PATCH 7/21] [POWERPC] Add early udbg support for 40x processors   Benjamin Herrenschmidt
• [PATCH 8/21] [POWERPC] EP405 boards support for arch/powerpc   Benjamin Herrenschmidt
• [PATCH 9/21] [POWERPC] Add PCI to Walnut platform   Benjamin Herrenschmidt
• [PATCH 10/21] [POWERPC] Base support for 440GX Taishan eval board   Benjamin Herrenschmidt
• [PATCH 11/21] [POWERPC] Wire up PCI on Bamboo board   Benjamin Herrenschmidt
• [PATCH 12/21] [POWERPC] Wire up 440EP USB controlle support to Bamboo board   Benjamin Herrenschmidt
• [PATCH 13/21] [POWERPC] Adds decoding of 440SPE memory size to boot wrapper library   Benjamin Herrenschmidt
• [PATCH 14/21] [POWERPC] Add mfspr/mtspr inline macros to 4xx bootwrapper   Benjamin Herrenschmidt
• [PATCH 15/21] [POWERPC] Adds 44x CPR0 accessors to boot wrapper   Benjamin Herrenschmidt
• [PATCH 16/21] [POWERPC] Rework 4xx clock probing in boot wrapper   Benjamin Herrenschmidt
• [PATCH 17/21] [POWERPC] Base support for 440SPe "Katmai" eval board   Benjamin Herrenschmidt
• [PATCH 18/21] [POWERPC] bamboo: remove bogus "ranges" property in EBC node   Benjamin Herrenschmidt
• [PATCH 19/21] [POWERPC] 4xx PCI-E Link setup improvements   Benjamin Herrenschmidt
• [PATCH 20/21] [POWERPC] pci32: 4xx embedded platforms want to reassign all PCI resources   Benjamin Herrenschmidt
• [PATCH 21/21] [POWERPC] 4xx: Add 440SPe revA runtime detection to PCIe   Benjamin Herrenschmidt
• [patch v2] PS3: Fix printing of os-area magic numbers   Paul Mackerras
• [PATCH 1/3] [POWERPC] the pci_dn class_code is only used by EEH   Stephen Rothwell
• [PATCH 2/3] [POWERPC] the pci_dn pcidev is only used by EEH   Stephen Rothwell
• [PATCH] [POWERPC] Make non-PCI build work again   Olof Johansson
• [PATCH 3/3] [POWERPC] iSeries: eliminate pci_dn bussubno   Stephen Rothwell
• [PATCH] [POWERPC] eeh.c: use for_each_child_of_node   Stephen Rothwell
• [PATCH] [POWERPC] pci_32.c: use for_each_child_of_node   Stephen Rothwell
• Enable RTC for Ebony and Walnut   Stephen Rothwell
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Lee Revell
• kernel stops at probing MTD CFI driver   Ishizaki Kou
• [PATCH 0/3] Powerpc support for SBC8548 board   Paul Gortmaker
• [PATCH 1/3] sbc8548: Add basic support for Wind River SBC8548 as powerpc   Paul Gortmaker
• [PATCH 2/3] sbc8548: Add device tree source for Wind River SBC8548 board   Paul Gortmaker
• [PATCH 3/3] sbc8548: Add default .config file for Wind River SBC8548   Paul Gortmaker
• [PATCH 1/3] [POWERPC] Add AMCC Makalu board support to platforms/40x   Stefan Roese
• [PATCH 2/3] [POWERPC] Makalu dts   Stefan Roese
• [PATCH 3/3] [POWERPC] Makalu defconfig   Stefan Roese
• [PATCH -mm 18/43] powerpc compat_binfmt_elf   Christoph Hellwig
• [PATCH -mm 18/43] powerpc compat_binfmt_elf   Roland McGrath
• [PATCH 2/3] (Resend part #1) Add the RapidIO support to powerpc architecture with memory mapping support.   Zhang Wei
• [PATCH 2/3] (Resend part #2) Add RapidIO memory mapping API and simple Bitmap allocation.   Zhang Wei
• Bug#457294: [powerpc] System time not updated after sleep cycle   Michel Dänzer
• [PATCH 1/21] [POWERPC] Reworking machine check handling and Fix 440/440A   Josh Boyer
• [PATCH 18/21] [POWERPC] bamboo: remove bogus "ranges" property in EBC node   Josh Boyer
• [PATCH 20/21] [POWERPC] pci32: 4xx embedded platforms want to reassign all PCI resources   Josh Boyer
• Yet more patches added to for-2.6.25/master branches   Paul Mackerras
• Yet more patches added to for-2.6.25/master branches   Arnd Bergmann
• Yet more patches added to for-2.6.25/master branches   Marian Balakowicz
• Time for cell code reshuffle?   Arnd Bergmann
• Yet more patches added to for-2.6.25/master branches   Kumar Gala
• [PATCH 1/3] sbc8548: Add basic support for Wind River SBC8548 as powerpc   Kumar Gala
• [PATCH 2/3] sbc8548: Add device tree source for Wind River SBC8548 board   Kumar Gala
• [PATCH 1/4] sbc8560: add basic support for Wind River SBC8560 as powerpc   Paul Gortmaker
• [PATCH] mpc85xx_ads: add in missing of_node_put()   Paul Gortmaker
• GPIO causing bus error   Wyse, Chris
• [PATCH 0/4] PowerPC: more Sequoia/Rainier updates for 2.6.25   Valentine Barshak
• [PATCH 1/4] PowerPC: Correct 440GRx machine_check callback   Valentine Barshak
• [PATCH 2/4] PowerPC: update 440EP(x)/440GR(x) identical PVR issue workaround   Valentine Barshak
• [PATCH 3/4] PowerPC: Add PCI entry to 440EPx Sequoia DTS.   Valentine Barshak
• [PATCH 4/4] PowerPC: Add PCI node to 440GRx Rainier DTS.   Valentine Barshak
• [techfield] GPIO causing bus error   Elayda, Bernardo (Bernie)
• [PATCH 2/4] PowerPC: update 440EP(x)/440GR(x) identical PVR issue workaround   Josh Boyer
• [RESEND DTC PATCH 2/2] Add support for binary includes.   Scott Wood
• OProfile callgraph support not working correctly on PPC processors   Bob Nelson
• [PATCH 4/4] PowerPC: Add PCI node to 440GRx Rainier DTS.   Valentine Barshak
• [PATCH 2/3] sbc8548: Add device tree source for Wind River SBC8548 board   Paul Gortmaker
• [PATCH 4/4] PowerPC: Add PCI entry to 440GRx Rainier DTS.   Valentine Barshak
• Time for cell code reshuffle?   Geoff Levand
• [PATCH 0/4] arch/powerpc support for SBC8560 board   Scott Wood
• Yet more patches added to for-2.6.25/master branches   Grant Likely
• [PATCH 3/4] sbc8560: Add device tree source for Wind River SBC8560 board   Scott Wood
• [PATCH -mm 18/43] powerpc compat_binfmt_elf   Kyle McMartin
• Yet more patches added to for-2.6.25/master branches   Marian Balakowicz
• Yet more patches added to for-2.6.25/master branches   Grant Likely
• Yet more patches added to for-2.6.25/master branches   Marian Balakowicz
• Time for cell code reshuffle?   Arnd Bergmann
• [PATCH -mm 18/43] powerpc compat_binfmt_elf   Arnd Bergmann
• [PATCH POWERPC] i2c: adds support for i2c bus on Frescale CPM1/CPM2 controllers   Jochen Friedrich
• [PATCH 2/4] PowerPC: update 440EP(x)/440GR(x) identical PVR issue workaround   Valentine Barshak
• [PATCH 2/4] PowerPC: update 440EP(x)/440GR(x) identical PVR issue workaround   Stefan Roese
• [PATCH -mm 18/43] powerpc compat_binfmt_elf   Sam Ravnborg
• [PATCH v3 0/4] device_type/compatible cleanups   Anton Vorontsov
• [PATCH 1/4] [POWERPC] qe_lib and users: get rid of device_type and model   Anton Vorontsov
• [PATCH 2/4] [POWERPC][NET] ucc_geth_mii and users: get rid of device_type   Anton Vorontsov
• [PATCH 3/4] [POWERPC][SPI] use brg-frequency for SPI in QE   Anton Vorontsov
• [PATCH 4/4] [POWERPC] fsl_spi_init and users: stop using device_type = "spi"   Anton Vorontsov
• [PATCH] [POWERPC] MPC8360E-RDK: Device tree and board file   Anton Vorontsov
• [PATCH 0/4] PowerPC: implement GPIO API   Anton Vorontsov
• [PATCH 1/4] [POWERPC] Implement GPIO API embryo   Anton Vorontsov
• [PATCH 2/4] [POWERPC] QE: implement GPIO API   Anton Vorontsov
• [PATCH 3/4] [POWERPC] CPM2: implement GPIO API   Anton Vorontsov
• [PATCH 4/4] [POWERPC] CPM1: implement GPIO API   Anton Vorontsov
• [PATCH 0/3] fsl upm, nand driver and MPC8360E-RDK as its first user   Anton Vorontsov
• [PATCH 1/3] [POWERPC] FSL UPM: routines to manage FSL UPMs   Anton Vorontsov
• [PATCH 2/3] [POWERPC][NAND] FSL UPM NAND driver   Anton Vorontsov
• [PATCH 3/3] [POWERPC] MPC8360E-RDK: add support for NAND on UPM   Anton Vorontsov
• [PATCH 0/4] PowerPC: implement GPIO API   Grant Likely
• [PATCH 0/4] PowerPC: implement GPIO API   Anton Vorontsov
• [PATCH POWERPC] i2c: adds support for i2c bus on Frescale CPM1/CPM2 controllers   Vitaly Bordug
• [PATCH 1/21] [POWERPC] Reworking machine check handling and Fix 440/440A   Benjamin Herrenschmidt
• [PATCH 3/4] [POWERPC] CPM2: implement GPIO API   Arnd Bergmann
• [PATCH 18/21] [POWERPC] bamboo: remove bogus "ranges" property in EBC node   Benjamin Herrenschmidt
• [PATCH 0/4] PowerPC: implement GPIO API   Grant Likely
• [PATCH 3/4] PowerPC: Add PCI entry to 440EPx Sequoia DTS.   Benjamin Herrenschmidt
• [PATCH 4/4] PowerPC: Add PCI node to 440GRx Rainier DTS.   Benjamin Herrenschmidt
• [PATCH 1/4] [POWERPC] qe_lib and users: get rid of device_type and model   Olof Johansson
• [PATCH 1/3] [POWERPC] FSL UPM: routines to manage FSL UPMs   Olof Johansson
• [DTC PATCH 1/2] Add yyerrorf() for formatted error messages.   Scott Wood
• Enable RTC for Ebony and Walnut   Olof Johansson
• [PATCH 18/21] [POWERPC] bamboo: remove bogus "ranges" property in EBC node   Josh Boyer
• [PATCH 8/21] [POWERPC] EP405 boards support for arch/powerpc   Stephen Rothwell
• Oops: Kernel access of bad area   Christian Kujau
• [PATCH 8/21] [POWERPC] EP405 boards support for arch/powerpc   Josh Boyer
• [PATCH 3/4] [POWERPC] CPM2: implement GPIO API   Anton Vorontsov
• [PATCH 8/21] [POWERPC] EP405 boards support for arch/powerpc   Benjamin Herrenschmidt
• [PATCH 10/21] [POWERPC] Base support for 440GX Taishan eval board   Stephen Rothwell
• [PATCH 0/4] PowerPC: implement GPIO API   Anton Vorontsov
• [PATCH 17/21] [POWERPC] Base support for 440SPe "Katmai" eval board   Stephen Rothwell
• [PATCH 1/4] [POWERPC] qe_lib and users: get rid of device_type and model   Anton Vorontsov
• [PATCH 17/21] [POWERPC] Base support for 440SPe "Katmai" eval board   Josh Boyer
• [PATCH 2/3] sbc8548: Add device tree source for Wind River SBC8548 board   David Gibson
• GPIO causing bus error   Jeff Mock
• [DTC PATCH 1/2] Add yyerrorf() for formatted error messages.   David Gibson
• [RESEND DTC PATCH 2/2] Add support for binary includes.   David Gibson
• [PATCH 3/4] PowerPC: Add PCI entry to 440EPx Sequoia DTS.   Stefan Roese
• [PATCH 4/4] PowerPC: Add PCI node to 440GRx Rainier DTS.   Stefan Roese
• [PATCH 4/4] PowerPC: Add PCI node to 440GRx Rainier DTS.   Benjamin Herrenschmidt
• [PATCH 4/4] [POWERPC] CPM1: implement GPIO API   Jochen Friedrich
• [PATCH POWERPC] i2c: adds support for i2c bus on Frescale CPM1/CPM2 controllers   Jochen Friedrich
• Yet more patches added to for-2.6.25/master branches   David Woodhouse
• [RESEND DTC PATCH 2/2] Add support for binary includes.   Scott Wood
• [PATCH 4/4] [POWERPC] CPM1: implement GPIO API   Jochen Friedrich
• [PATCH 4/4] [POWERPC] CPM1: implement GPIO API   Anton Vorontsov
• [PATCH/RFC] powerpc: DBox2 Board Support   Jochen Friedrich
• Time for cell code reshuffle?   Benjamin Herrenschmidt
• Time for cell code reshuffle?   Benjamin Herrenschmidt
• Time for cell code reshuffle?   Benjamin Herrenschmidt
• Time for cell code reshuffle?   Josh Boyer
• Time for cell code reshuffle?   Benjamin Herrenschmidt
• [PATCH 2/3] (Resend part #1) Add the RapidIO support to powerpc architecture with memory mapping support.   Stephen Rothwell
• [PATCH] mpc85xx_ads: add in missing of_node_put()   Stephen Rothwell
• [PATCH] [POWERPC] MPC8360E-RDK: Device tree and board file   Stephen Rothwell
• [PATCH 1/3] [POWERPC] FSL UPM: routines to manage FSL UPMs   Stephen Rothwell
• [PATCH 2/3] [POWERPC][NAND] FSL UPM NAND driver   Stephen Rothwell
• [PATCH 0/4] PowerPC: implement GPIO API   Segher Boessenkool
• [PATCH 1/4] [POWERPC] Implement GPIO API embryo   Segher Boessenkool
• [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC   Timur Tabi
• [PATCH] [POWERPC] MPC8360E-RDK: Device tree and board file   Timur Tabi
• [PATCH] [POWERPC] MPC8360E-RDK: Device tree and board file   Timur Tabi
• [PATCH] Add information on enabling sound on the MPC8641 HPCN   Timur Tabi
• [PATCH 0/4] PowerPC: implement GPIO API   David Gibson
• [PATCH 1/4] [POWERPC] Implement GPIO API embryo   David Gibson
• [PATCH 17/21] [POWERPC] Base support for 440SPe "Katmai" eval board   Stephen Rothwell
• [Cbe-oss-dev] Time for cell code reshuffle?   Jeremy Kerr
• [patch v2] PS3: Fix printing of os-area magic numbers   Geoff Levand
• [patch v3] PS3: Fix printing of os-area magic numbers   Geoff Levand
• Yet more patches added to for-2.6.25/master branches   Michael Neuling
• [PATCH/RFC] powerpc: DBox2 Board Support   Stephen Rothwell
• [patch v3] PS3: Fix printing of os-area magic numbers   Geert Uytterhoeven
• [PATCH 0/4] PowerPC: implement GPIO API   Segher Boessenkool
• [PATCH 1/4] [POWERPC] Implement GPIO API embryo   Segher Boessenkool
• [PATCH 0/4] PowerPC: implement GPIO API   Anton Vorontsov
• [PATCH 1/3] [POWERPC] FSL UPM: routines to manage FSL UPMs   Anton Vorontsov
• [PATCH 2/3] [POWERPC][NAND] FSL UPM NAND driver   Anton Vorontsov
• [PATCH 1/3] [POWERPC] FSL UPM: routines to manage FSL UPMs   Anton Vorontsov
• [PATCH 1/3] [POWERPC] FSL UPM: routines to manage FSL UPMs   Anton Vorontsov
• [Cbe-oss-dev] Time for cell code reshuffle?   Christoph Hellwig
• [Cbe-oss-dev] Time for cell code reshuffle?   Geert Uytterhoeven
• [PATCH] Add information on enabling sound on the MPC8641 HPCN   Olof Johansson
• [PATCH] powerpc: DBox2 Board Support   Jochen Friedrich
• [Cbe-oss-dev] Time for cell code reshuffle?   Luca Barbato
• [patch v3] PS3: Fix printing of os-area magic numbers   Geoff Levand
• [PATCH] powerpc: DBox2 Board Support   Jochen Friedrich
• [PATCHv2] powerpc: DBox2 Board Support   Jochen Friedrich
• [patch v4] PS3: Fix printing of os-area magic numbers   Geoff Levand
• [PATCH/RFC] powerpc: Move definition of buffer descriptor to cpm.h   Jochen Friedrich
• [PATCH] i2c: adds support for i2c bus on Frescale CPM1/CPM2 controllers   Jochen Friedrich
• [PATCH] Do not fail build if mkimage is not available   Michael Buesch
• [PATCH] Do not fail build if mkimage is not available   Josh Boyer
• [PATCH] Do not fail build if mkimage is not available   Michael Buesch
• Build breakage on powerpc with 2.6.24-rc6-mm1   Balbir Singh
• [PATCH/RFC] powerpc: DBox2 Board Support   David Gibson
• Yet more patches added to for-2.6.25/master branches   Paul Mackerras
• [RESEND DTC PATCH 2/2] Add support for binary includes.   David Gibson
• [PATCH 1/21] [POWERPC] Reworking machine check handling and Fix 440/440A   Josh Boyer
• Build breakage on powerpc with 2.6.24-rc6-mm1   Stephen Rothwell
• drivers/net/iseries_veth.c dubious sysfs usage   Stephen Rothwell
• SCSI errors on powerpc with 2.6.24-rc6-mm1   Balbir Singh
• Build breakage on powerpc with 2.6.24-rc6-mm1   Greg KH
• drivers/net/iseries_veth.c dubious sysfs usage   Greg KH
• [PATCH/RFC] powerpc: DBox2 Board Support   Jochen Friedrich
• [PATCH] [POWERPC] MPC8360E-RDK: Device tree and board file   Anton Vorontsov
• [PATCH] [POWERPC] MPC8360E-RDK: Device tree and board file   Anton Vorontsov
• [PATCHv2] powerpc: DBox2 Board Support   Arnd Bergmann
• [PATCH 2/4] PowerPC: update 440EP(x)/440GR(x) identical PVR issue workaround   Valentine Barshak
• [PATCH 1/21] [POWERPC] Reworking machine check handling and Fix 440/440A   Josh Boyer
• [PATCH/RFC] powerpc: DBox2 Board Support   Kumar Gala
• [PATCH] Add information on enabling sound on the MPC8641 HPCN   Timur Tabi
• [PATCH] [POWERPC] MPC8360E-RDK: Device tree and board file   Timur Tabi
• Build breakage on powerpc with 2.6.24-rc6-mm1   Olof Johansson
• [PATCH] Add information on enabling sound on the MPC8641 HPCN   Olof Johansson
• [PATCH/RFC] powerpc: DBox2 Board Support   David Gibson
• 4xx: for-2.6.25 branch created   Josh Boyer
• [PATCH] Add information on enabling sound on the MPC8641 HPCN   Timur Tabi
• [PATCH] [POWERPC] MPC8360E-RDK: Device tree and board file   Timur Tabi
• More patches added to for-2.6.25 and master branches of powerpc.git   Benjamin Herrenschmidt
• [PATCH] Add information on enabling sound on the MPC8641 HPCN   Olof Johansson
• Time for cell code reshuffle?   Ishizaki Kou
• [PATCH] powerpc: Do not fail build if mkimage is not available   Michael Buesch
• [PATCH] powerpc: Do not fail build if mkimage is not available   Andreas Schwab
• [PATCHv2] powerpc: DBox2 Board Support   Jochen Friedrich
• [PATCH] powerpc: Do not fail build if mkimage is not available   Michael Buesch
• [PATCH/RFC] powerpc: DBox2 Board Support   Jochen Friedrich
• [PATCH] powerpc: Do not fail build if mkimage is not available   Andreas Schwab
• [PATCH] powerpc: Do not fail build if mkimage is not available   Michael Buesch
• [PATCH v2] powerpc: Do not fail build if mkimage is not available   Michael Buesch
• [PATCH] powerpc: Do not fail build if mkimage is not available   Andreas Schwab
• [PATCH] powerpc: Do not fail build if mkimage is not available   Michael Buesch
• [PATCH v2] powerpc: Do not fail build if mkimage is not available   Andreas Schwab
• [PATCH v2] powerpc: Do not fail build if mkimage is not available   Michael Buesch
• [PATCH] powerpc: Do not fail build if mkimage is not available   Andreas Schwab
• [PATCH] powerpc: Do not fail build if mkimage is not available   Michael Buesch
• [PATCH] powerpc: Do not fail build if mkimage is not available   Andreas Schwab
• [PATCH v2] powerpc: Do not fail build if mkimage is not available   Andreas Schwab
• [PATCH] [POWERPC] MPC8360E-RDK: Device tree and board file   Anton Vorontsov
• [PATCH v5] qe: add ability to upload QE firmware   Anton Vorontsov
• [PATCH v2] ucc_uart: add support for Freescale QUICCEngine UART   Anton Vorontsov
• [PATCHv2] powerpc: DBox2 Board Support   Arnd Bergmann
• [PATCH] [POWERPC] MPC8360E-RDK: Device tree and board file   Anton Vorontsov
• Time for cell code reshuffle?   Arnd Bergmann
• Device node - How does kernel know about it   Siva Prasad
• Device node - How does kernel know about it   Jon Smirl
• SCSI errors on powerpc with 2.6.24-rc6-mm1   FUJITA Tomonori
• SCSI errors on powerpc with 2.6.24-rc6-mm1   Balbir Singh
• SCSI errors on powerpc with 2.6.24-rc6-mm1   FUJITA Tomonori
• SCSI errors on powerpc with 2.6.24-rc6-mm1   Balbir Singh
• [PATCH v2] powerpc: Do not fail build if mkimage is not available   Wolfgang Denk
• [PATCH v2] powerpc: Do not fail build if mkimage is not available   Andreas Schwab
• [PATCH] [POWERPC] MPC8360E-RDK: Device tree and board file   Timur Tabi
• [PATCH] [POWERPC] MPC8360E-RDK: Device tree and board file   Anton Vorontsov
• [PATCH 0/5] Version 17, series to add device tree naming to i2c   Jon Smirl
• [PATCH v2] powerpc: Do not fail build if mkimage is not available   Michael Buesch
• Problems with arch/powerpc   Sean MacLennan
• update: RE: nap/dfs on 7448   Leisner, Martin
• Problems with arch/powerpc   Josh Boyer
• Problems with arch/powerpc   Sean MacLennan
• Device node - How does kernel know about it   Siva Prasad
• 2.6.10 kernel hangs after timer_init   goog long
• [PATCH 1/2] [POWERPC] smp_call_function_map should be static   Olof Johansson
• [PATCH 2/2] [POWERPC] Make smp_send_stop() handle panic and xmon reboot   Olof Johansson
• Device node - How does kernel know about it   Jon Smirl
• Device node - How does kernel know about it   Siva Prasad
• update: RE: nap/dfs on 7448   Benjamin Herrenschmidt
• SCSI errors on powerpc with 2.6.24-rc6-mm1   FUJITA Tomonori
• Problems with arch/powerpc   Sean MacLennan
• Problems with arch/powerpc   Sean MacLennan
• SCSI errors on powerpc with 2.6.24-rc6-mm1   Balbir Singh
• SCSI errors on powerpc with 2.6.24-rc6-mm1   FUJITA Tomonori
• Device node - How does kernel know about it   Nicholas Mc Guire
• Please pull powerpc.git merge branch   Paul Mackerras
• [PATCH 0/5] Version 17, series to add device tree naming to i2c   Jean Delvare
• Problems with arch/powerpc   Josh Boyer
• [PATCH/RFC] Add support for PowerQUICC watchdog   Jochen Friedrich
• [PATCH/RFC] Add support for freescale watchdog to CPM serial driver.   Jochen Friedrich
• [PATCH] [POWERPC] pasemi: Distribute interrupts evenly across cpus   Olof Johansson
• [PATCHv3] powerpc: DBox2 Board Support   Jochen Friedrich
• Problems with arch/powerpc   Sean MacLennan
• External int in dts   Sean MacLennan
• Problems with arch/powerpc   Josh Boyer
• [2.6.24 patch] restore Cell OProfile support   Adrian Bunk
• External int in dts   Stefan Roese
• [2.6.24 patch] restore Cell OProfile support   Mathieu Desnoyers
• External int in dts   Sean MacLennan
• Please pull powerpc.git merge branch   Geoff Levand
• [PATCH v2 0/4] Add C67x00 USB HCD driver.   Grant Likely
• [PATCH v2 1/4] USB: add Cypress c67x00 low level interface code   Grant Likely
• [PATCH v2 2/4] USB: add Cypress c67x00 OTG controller core driver   Grant Likely
• [PATCH v2 3/4] USB: add Cypress c67x00 OTG controller HCD driver   Grant Likely
• [PATCH v2 4/4] USB: add Cypress c67x00 OTG controller driver to Kconfig and Makefiles   Grant Likely
• [PATCH/RFC] Add support for PowerQUICC watchdog   Stephen Rothwell
• [PATCH v2 2/4] USB: add Cypress c67x00 OTG controller core driver   Stephen Rothwell
• [PATCH v2 3/4] USB: add Cypress c67x00 OTG controller HCD driver   Stephen Rothwell
• [2.6.24 patch] Fix Cell OProfile support   Mathieu Desnoyers
• [PATCH 1/3] [NET] phy/fixed.c: rework to not duplicate PHY layerfunctionality   Joakim Tjernlund
• Please pull from 'for-2.6.25' branch of 4xx tree   Josh Boyer
• [linux-usb-devel] [PATCH v2 3/4] USB: add Cypress c67x00 OTG controller HCD driver   Alan Stern
• [PATCH v5] qe: add ability to upload QE firmware   Timur Tabi
• [PATCH v2] ucc_uart: add support for Freescale QUICCEngine UART   Timur Tabi
• [PATCH v5] qe: add ability to upload QE firmware   Anton Vorontsov
• Device node - How does kernel know about it   Brad Boyer
• Please pull from 'for-2.6.25' branch of pasemi tree   Olof Johansson
• Please pull powerpc.git merge branch   Paul Mackerras
• + iommu-sg-add-iommu-helper-functions-for-the-free-area-management.patch added to -mm tree   FUJITA Tomonori
• Please pull from 'for-2.6.25' branch of 4xx tree   Paul Mackerras
• Please pull from 'for-2.6.25' branch of pasemi tree   Paul Mackerras
• [PATCH] [POWERPC] 4xx: PCIe: Increase max busses per port to 64   Stefan Roese
• SCSI errors on powerpc with 2.6.24-rc6-mm1   Balbir Singh

Last message date: Mon Dec 31 23:27:35 EST 2007
Archived on: Fri Jun 5 17:13:40 EST 2009

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...