[PATCH RFC 6/7] [POWERPC][NAND] FSL UPM NAND driver
Anton Vorontsov
avorontsov at ru.mvista.com
Tue Dec 11 07:49:38 EST 2007
It's using FSL UPM infrastructure. So far only 8 bit accessors
are implemented.
Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
---
drivers/mtd/nand/Kconfig | 7 +
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/fsl_upm.c | 310 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 318 insertions(+), 0 deletions(-)
create mode 100644 drivers/mtd/nand/fsl_upm.c
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 246d451..910b4d5 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -306,4 +306,11 @@ config MTD_ALAUDA
These two (and possibly other) Alauda-based cardreaders for
SmartMedia and xD allow raw flash access.
+config MTD_NAND_FSL_UPM
+ tristate "MTD driver for NAND on Freescale UPM"
+ depends on MTD_NAND && FSL_UPM
+ help
+ Enables support for NAND Flash wired to Freescale processors'
+ localbus with pre-programmed User-Programmable Machine.
+
endif # MTD_NAND
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 3ad6c01..d553ea3 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -29,5 +29,6 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o
obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
obj-$(CONFIG_MTD_ALAUDA) += alauda.o
+obj-$(CONFIG_MTD_NAND_FSL_UPM) += fsl_upm.o
nand-objs := nand_base.o nand_bbt.o
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
new file mode 100644
index 0000000..a2bddb0
--- /dev/null
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -0,0 +1,310 @@
+/*
+ * Freescale UPM NAND driver.
+ *
+ * Copyright (c) 2007 MontaVista Software, Inc.
+ * Copyright (c) 2007 Anton Vorontsov <avorontsov at ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/mtd.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/fsl_upm.h>
+
+struct upm_data {
+ struct of_device *ofdev;
+ struct mtd_info mtd;
+ struct nand_chip chip;
+ int last_ctrl;
+#ifdef CONFIG_MTD_PARTITIONS
+ struct mtd_partition *parts;
+#endif
+
+ struct fsl_upm upm;
+
+ int width;
+ int upm_addr_offset;
+ int upm_cmd_offset;
+ void __iomem *io_base;
+ int rnb_gpio;
+ const u32 *wait_pattern;
+ const u32 *wait_write;
+ int chip_delay;
+};
+
+#define to_upm_data(mtd) container_of(mtd, struct upm_data, mtd)
+
+static int upm_chip_ready(struct mtd_info *mtd)
+{
+ struct upm_data *ud = to_upm_data(mtd);
+
+ if (gpio_get_value(ud->rnb_gpio))
+ return 1;
+
+ dev_vdbg(&ud->ofdev->dev, "busy\n");
+ return 0;
+}
+
+static void upm_wait_rnb(struct upm_data *ud)
+{
+ int cnt = 1000000;
+
+ if (ud->rnb_gpio >= 0) {
+ while (--cnt && !upm_chip_ready(&ud->mtd))
+ cpu_relax();
+ }
+
+ if (!cnt)
+ dev_err(&ud->ofdev->dev, "tired waiting for RNB\n");
+}
+
+static void upm_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct upm_data *ud = to_upm_data(mtd);
+
+ if (!(ctrl & ud->last_ctrl)) {
+ fsl_upm_end_pattern(&ud->upm);
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ ud->last_ctrl = ctrl & (NAND_ALE | NAND_CLE);
+ }
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if (ctrl & NAND_ALE)
+ fsl_upm_start_pattern(&ud->upm, ud->upm_addr_offset);
+ else if (ctrl & NAND_CLE)
+ fsl_upm_start_pattern(&ud->upm, ud->upm_cmd_offset);
+ }
+
+ fsl_upm_run_pattern(&ud->upm, ud->io_base, ud->width, cmd);
+
+ if (ud->wait_pattern)
+ upm_wait_rnb(ud);
+}
+
+static uint8_t upm_read_byte(struct mtd_info *mtd)
+{
+ struct upm_data *ud = to_upm_data(mtd);
+
+ return in_8(ud->chip.IO_ADDR_R);
+}
+
+static void upm_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct upm_data *ud = to_upm_data(mtd);
+ int i;
+
+ for (i = 0; i < len; i++)
+ buf[i] = in_8(ud->chip.IO_ADDR_R);
+}
+
+static void upm_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ struct upm_data *ud = to_upm_data(mtd);
+ int i;
+
+ for (i = 0; i < len; i++) {
+ out_8(ud->chip.IO_ADDR_W, buf[i]);
+ if (ud->wait_write)
+ upm_wait_rnb(ud);
+ }
+}
+
+static int __devinit upm_chip_init(struct upm_data *ud)
+{
+ int ret;
+#ifdef CONFIG_MTD_PARTITIONS
+ static const char *part_types[] = { "cmdlinepart", NULL, };
+#endif
+
+ ud->chip.IO_ADDR_R = ud->io_base;
+ ud->chip.IO_ADDR_W = ud->io_base;
+ ud->chip.cmd_ctrl = upm_cmd_ctrl;
+ ud->chip.chip_delay = ud->chip_delay;
+ ud->chip.read_byte = upm_read_byte;
+ ud->chip.read_buf = upm_read_buf;
+ ud->chip.write_buf = upm_write_buf;
+ ud->chip.ecc.mode = NAND_ECC_SOFT;
+
+ if (ud->rnb_gpio != (unsigned int)-1)
+ ud->chip.dev_ready = upm_chip_ready;
+
+ ud->mtd.priv = &ud->chip;
+ ud->mtd.owner = THIS_MODULE;
+
+ ret = nand_scan(&ud->mtd, 1);
+ if (ret)
+ return ret;
+
+#ifdef CONFIG_MTD_PARTITIONS
+ ret = parse_mtd_partitions(&ud->mtd, part_types, &ud->parts, 0);
+ if (ret > 0)
+ return add_mtd_partitions(&ud->mtd, ud->parts, ret);
+#endif
+ return add_mtd_device(&ud->mtd);
+}
+
+static int __devinit upm_chip_probe(struct of_device *ofdev,
+ const struct of_device_id *ofid)
+{
+ struct upm_data *ud;
+ struct resource io_res;
+ const u32 *prop;
+ int ret;
+
+ ud = kzalloc(sizeof(*ud), GFP_KERNEL);
+ if (!ud)
+ return -ENOMEM;
+
+ ret = of_address_to_resource(ofdev->node, 0, &io_res);
+ if (ret) {
+ dev_err(&ofdev->dev, "can't get IO base\n");
+ goto err;
+ }
+
+ ud->width = io_res.end - io_res.start + 1;
+ if (ud->width != 1) {
+ dev_err(&ofdev->dev, "> 8 bit accessors not implemented\n");
+ ret = -ENOSYS;
+ goto err;
+ }
+ ud->width *= 8;
+
+ prop = of_get_property(ofdev->node, "upm", NULL);
+ if (!prop) {
+ dev_err(&ofdev->dev, "can't get UPM to use\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ ret = fsl_upm_get_for(ofdev->node, (const char *)prop, &ud->upm);
+ if (ret) {
+ dev_err(&ofdev->dev, "can't get FSL UPM\n");
+ goto err;
+ }
+
+ prop = of_get_property(ofdev->node, "upm-addr-offset", NULL);
+ if (!prop) {
+ dev_err(&ofdev->dev, "can't get UPM address offset\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ ud->upm_addr_offset = *prop;
+
+ prop = of_get_property(ofdev->node, "upm-cmd-offset", NULL);
+ if (!prop) {
+ dev_err(&ofdev->dev, "can't get UPM command offset\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ ud->upm_cmd_offset = *prop;
+
+ ud->rnb_gpio = of_get_gpio(ofdev->node, 0);
+ if (ud->rnb_gpio >= 0) {
+ ret = gpio_request(ud->rnb_gpio, ofdev->dev.bus_id);
+ if (ret) {
+ dev_err(&ofdev->dev, "can't request RNB gpio\n");
+ goto err;
+ }
+ } else if (ud->rnb_gpio == -EINVAL) {
+ dev_err(&ofdev->dev, "specified RNB gpio is invalid\n");
+ goto err;
+ }
+
+ ud->io_base = devm_ioremap_nocache(&ofdev->dev, io_res.start,
+ io_res.end - io_res.start + 1);
+ if (!ud->io_base) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ ud->ofdev = ofdev;
+ ud->last_ctrl = NAND_CLE;
+ ud->wait_pattern = of_get_property(ofdev->node, "wait-pattern", NULL);
+ ud->wait_write = of_get_property(ofdev->node, "wait-write", NULL);
+
+ prop = of_get_property(ofdev->node, "chip-delay", NULL);
+ if (prop)
+ ud->chip_delay = *prop;
+ else
+ ud->chip_delay = 50;
+
+ ret = upm_chip_init(ud);
+ if (ret)
+ goto err;
+
+ dev_set_drvdata(&ofdev->dev, ud);
+
+ return 0;
+
+err:
+ if (fsl_upm_got(&ud->upm))
+ fsl_upm_free(&ud->upm);
+
+ if (ud->rnb_gpio >= 0)
+ gpio_free(ud->rnb_gpio);
+
+ kfree(ud);
+
+ return ret;
+}
+
+static int __devexit upm_chip_remove(struct of_device *ofdev)
+{
+ struct upm_data *ud = dev_get_drvdata(&ofdev->dev);
+
+ nand_release(&ud->mtd);
+
+ fsl_upm_free(&ud->upm);
+
+ if (ud->rnb_gpio != (unsigned int)-1)
+ gpio_free(ud->rnb_gpio);
+
+ kfree(ud);
+
+ return 0;
+}
+
+static struct of_device_id of_upm_nand_match[] = {
+ { .compatible = "fsl,upm-nand" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_upm_nand_match);
+
+static struct of_platform_driver of_upm_chip_driver = {
+ .name = "fsl_upm_nand",
+ .match_table = of_upm_nand_match,
+ .probe = upm_chip_probe,
+ .remove = __devexit_p(upm_chip_remove),
+};
+
+static int __init upm_nand_init(void)
+{
+ return of_register_platform_driver(&of_upm_chip_driver);
+}
+
+static void __exit upm_nand_exit(void)
+{
+ of_unregister_platform_driver(&of_upm_chip_driver);
+}
+
+module_init(upm_nand_init);
+module_exit(upm_nand_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Anton Vorontsov <avorontsov at ru.mvista.com>");
+MODULE_DESCRIPTION("Driver for NAND chips working through Freescale "
+ "LocalBus User-Programmable Machine");
--
1.5.2.2
More information about the Linuxppc-dev
mailing list