[PATCH 1/7] Copy mpc-i2c to preserve support for ARCH=ppc and allow changes on ARCH=powerpc

[Kumar Gala]

On Dec 17, 2007, at 8:39 PM, Jon Smirl wrote:

> Temporarily copy the mpc-i2c driver to continue support for the ppc  
> architecture until it is removed in mid-2008. This file should be  
> deleted as part of ppc's final removal.
>
> Signed-off-by: Jon Smirl <jonsmirl at gmail.com>
>
> Signed-off-by: Jon Smirl <jonsmirl at gmail.com>
>
> Signed-off-by: Jon Smirl <jonsmirl at gmail.com>
> ---
>
> arch/ppc/configs/TQM8540_defconfig     |    2
> arch/ppc/configs/TQM8541_defconfig     |    2
> arch/ppc/configs/TQM8555_defconfig     |    2
> arch/ppc/configs/TQM8560_defconfig     |    2
> arch/ppc/configs/mpc834x_sys_defconfig |    2
> arch/ppc/configs/mpc8540_ads_defconfig |    2
> arch/ppc/configs/mpc8548_cds_defconfig |    2
> arch/ppc/configs/mpc8555_cds_defconfig |    2
> arch/ppc/configs/mpc8560_ads_defconfig |    2
> drivers/i2c/busses/Kconfig             |   16 +
> drivers/i2c/busses/Makefile            |    1
> drivers/i2c/busses/i2c-mpc-ppc.c       |  418 +++++++++++++++++++++++ 
> +++++++++
> 12 files changed, 443 insertions(+), 10 deletions(-)
> create mode 100644 drivers/i2c/busses/i2c-mpc-ppc.c

Nak.

Just ifdef the probe functionality in i2c-mpc.c based on  
CONFIG_PPC_MERGE.  Your patch set shows the reason you should do  
this.  You provide fixes to the error path handling, but only for i2c- 
mpc.c and not i2c-mpc-ppc.c.

- k