[PATCH 2/3] [POWERPC] Makalu dts
Stefan Roese
sr at denx.de
Fri Dec 21 18:10:51 EST 2007
Signed-off-by: Stefan Roese <sr at denx.de>
---
arch/powerpc/boot/dts/makalu.dts | 347 ++++++++++++++++++++++++++++++++++++++
1 files changed, 347 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/makalu.dts
diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts
new file mode 100644
index 0000000..bdd70e4
--- /dev/null
+++ b/arch/powerpc/boot/dts/makalu.dts
@@ -0,0 +1,347 @@
+/*
+ * Device Tree Source for AMCC Makalu (405EX)
+ *
+ * Copyright 2007 DENX Software Engineering, Stefan Roese <sr at denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "amcc,makalu";
+ compatible = "amcc,makalu";
+ dcr-parent = <&/cpus/cpu at 0>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ ethernet1 = &EMAC1;
+ serial0 = &UART0;
+ serial1 = &UART1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ device_type = "cpu";
+ model = "PowerPC,405EX";
+ reg = <0>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ timebase-frequency = <0>; /* Filled in by U-Boot */
+ i-cache-line-size = <20>;
+ d-cache-line-size = <20>;
+ i-cache-size = <4000>; /* 16 kB */
+ d-cache-size = <4000>; /* 16 kB */
+ dcr-controller;
+ dcr-access-method = "native";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0>; /* Filled in by U-Boot */
+ };
+
+ UIC0: interrupt-controller {
+ compatible = "ibm,uic-405ex", "ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0c0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-405ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0d0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <1e 4 1f 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible = "ibm,uic-405ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <2>;
+ dcr-reg = <0e0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <1c 4 1d 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ plb {
+ compatible = "ibm,plb-405ex", "ibm,plb4";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ SDRAM0: memory-controller {
+ compatible = "ibm,sdram-405ex";
+ dcr-reg = <010 2>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
+ dcr-reg = <180 62>;
+ num-tx-chans = <2>;
+ num-rx-chans = <2>;
+ interrupt-parent = <&MAL0>;
+ interrupts = <0 1 2 3 4>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
+ /*RXEOB*/ 1 &UIC0 b 4
+ /*SERR*/ 2 &UIC1 0 4
+ /*TXDE*/ 3 &UIC1 1 4
+ /*RXDE*/ 4 &UIC1 2 4>;
+ interrupt-map-mask = <ffffffff>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-405ex", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <80000000 80000000 10000000
+ ef600000 ef600000 a00000
+ f0000000 f0000000 10000000>;
+ dcr-reg = <0a0 5>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-405ex", "ibm,ebc";
+ dcr-reg = <012 2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ /* ranges property is supplied by U-Boot */
+ interrupts = <5 1>;
+ interrupt-parent = <&UIC1>;
+
+ nor_flash at 0,0 {
+ compatible = "amd,s29gl512n", "cfi-flash";
+ bank-width = <2>;
+ reg = <0 000000 4000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition at 0 {
+ label = "kernel";
+ reg = <0 200000>;
+ };
+ partition at 200000 {
+ label = "root";
+ reg = <200000 200000>;
+ };
+ partition at 400000 {
+ label = "user";
+ reg = <400000 3b60000>;
+ };
+ partition at 3f60000 {
+ label = "env";
+ reg = <3f60000 40000>;
+ };
+ partition at 3fa0000 {
+ label = "u-boot";
+ reg = <3fa0000 60000>;
+ };
+ };
+ };
+
+ UART0: serial at ef600200 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600200 8>;
+ virtual-reg = <ef600200>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <1a 4>;
+ };
+
+ UART1: serial at ef600300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600300 8>;
+ virtual-reg = <ef600300>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <1 4>;
+ };
+
+ IIC0: i2c at ef600400 {
+ device_type = "i2c";
+ compatible = "ibm,iic-405ex", "ibm,iic";
+ reg = <ef600400 14>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <2 4>;
+ };
+
+ IIC1: i2c at ef600500 {
+ device_type = "i2c";
+ compatible = "ibm,iic-405ex", "ibm,iic";
+ reg = <ef600500 14>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <7 4>;
+ };
+
+
+ RGMII0: emac-rgmii at ef600b00 {
+ device_type = "rgmii-interface";
+ compatible = "ibm,rgmii-405ex", "ibm,rgmii";
+ reg = <ef600b00 104>;
+ has-mdio;
+ };
+
+ EMAC0: ethernet at ef600900 {
+ linux,network-index = <0>;
+ device_type = "network";
+ compatible = "ibm,emac-405ex", "ibm,emac4";
+ interrupt-parent = <&EMAC0>;
+ interrupts = <0 1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0 &UIC0 18 4
+ /*Wake*/ 1 &UIC1 1d 4>;
+ reg = <ef600900 70>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <5dc>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rgmii";
+ phy-map = <0000003f>; /* Start at 6 */
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+
+ EMAC1: ethernet at ef600a00 {
+ linux,network-index = <1>;
+ device_type = "network";
+ compatible = "ibm,emac-405ex", "ibm,emac4";
+ interrupt-parent = <&EMAC1>;
+ interrupts = <0 1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0 &UIC0 19 4
+ /*Wake*/ 1 &UIC1 1f 4>;
+ reg = <ef600a00 70>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <1>;
+ mal-rx-channel = <1>;
+ cell-index = <1>;
+ max-frame-size = <5dc>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rgmii";
+ phy-map = <00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <1>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+ };
+
+ PCIE0: pciex at 0a0000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
+ primary;
+ port = <0>; /* port number */
+ reg = <a0000000 20000000 /* Config space access */
+ ef000000 00001000>; /* Registers */
+ dcr-reg = <040 020>;
+ sdr-base = <400>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 90000000 0 08000000
+ 01000000 0 00000000 e0000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 80000000>;
+
+ /* This drives busses 0x00 to 0x3f */
+ bus-range = <00 3f>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map = <
+ 0000 0 0 1 &UIC2 0 4 /* swizzled int A */
+ 0000 0 0 2 &UIC2 1 4 /* swizzled int B */
+ 0000 0 0 3 &UIC2 2 4 /* swizzled int C */
+ 0000 0 0 4 &UIC2 3 4 /* swizzled int D */>;
+ };
+
+ PCIE1: pciex at 0c0000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
+ primary;
+ port = <1>; /* port number */
+ reg = <c0000000 20000000 /* Config space access */
+ ef001000 00001000>; /* Registers */
+ dcr-reg = <060 020>;
+ sdr-base = <440>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 98000000 0 08000000
+ 01000000 0 00000000 e0010000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 80000000>;
+
+ /* This drives busses 0x40 to 0x7f */
+ bus-range = <40 7f>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map = <
+ 0000 0 0 1 &UIC2 b 4 /* swizzled int A */
+ 0000 0 0 2 &UIC2 c 4 /* swizzled int B */
+ 0000 0 0 3 &UIC2 d 4 /* swizzled int C */
+ 0000 0 0 4 &UIC2 e 4 /* swizzled int D */>;
+ };
+ };
+};
--
1.5.4.rc1
More information about the Linuxppc-dev
mailing list