[PATCH v2 2/3] mpc82xx: Embedded Planet EP8248E support

[David Gibson]

On Wed, Dec 12, 2007 at 04:54:29PM -0600, Scott Wood wrote:
> This board is also resold by Freescale under the names
> "QUICCStart MPC8248 Evaluation System" and "CWH-PPC-8248N-VE".

[snip]
> +	localbus {

Should be localbus at f0010100.

> +		compatible = "fsl,ep8248e-localbus",
> +		             "fsl,mpc8248-localbus",
> +		             "fsl,pq2-localbus";
> +		#address-cells = <2>;
> +		#size-cells = <1>;
> +		reg = <f0010100 40>;
> +
> +		ranges = <0 0 fc000000 04000000
> +		          1 0 fa000000 00008000>;
> +
> +		flash at 0,3800000 {
> +			compatible = "cfi-flash";
> +			reg = <0 3800000 800000>;
> +			bank-width = <4>;
> +			device-width = <2>;
> +		};
> +
> +		bcsr at 1,0 {
> +			#address-cells = <2>;
> +			#size-cells = <1>;
> +			reg = <1 0 10>;
> +			compatible = "fsl,ep8248e-bcsr";
> +			ranges;
> +
> +			mdio {

As I think I said about another tree, this mdio-under-bcsr arrangement
is pretty strange.  What's going on here.


> +				device_type = "mdio";
> +				compatible = "fsl,ep8248e-mdio-bitbang";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				reg = <1 8 1>;
> +
> +				PHY0: ethernet-phy at 0 {
> +					interrupt-parent = <&PIC>;
> +					reg = <0>;
> +					device_type = "ethernet-phy";
> +				};
> +
> +				PHY1: ethernet-phy at 1 {
> +					interrupt-parent = <&PIC>;
> +					reg = <1>;
> +					device_type = "ethernet-phy";
> +				};
> +			};
> +		};
> +	};
> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0 0>;
> +	};
> +
> +	soc at f0000000 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		device_type = "soc";

Ditch the device_type.

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson