[PATCH] add MPC837x MDS board default device tree

Kumar Gala galak at kernel.crashing.org
Fri Dec 14 19:12:39 EST 2007


On Dec 6, 2007, at 8:01 PM, David Gibson wrote:

> On Wed, Dec 05, 2007 at 06:37:53PM +0800, Li Yang wrote:
>> Signed-off-by: Li Yang <leoli at freescale.com>
>> ---
>> Update SATA nodes; remove serdes nodes; add aliases and labels.
>>
>> arch/powerpc/boot/dts/mpc8377_mds.dts |  270 +++++++++++++++++++++++ 
>> ++++++++
>> arch/powerpc/boot/dts/mpc8378_mds.dts |  256 +++++++++++++++++++++++ 
>> ++++++
>> arch/powerpc/boot/dts/mpc8379_mds.dts |  284 +++++++++++++++++++++++ 
>> ++++++++++
>> 3 files changed, 810 insertions(+), 0 deletions(-)
>> create mode 100644 arch/powerpc/boot/dts/mpc8377_mds.dts
>> create mode 100644 arch/powerpc/boot/dts/mpc8378_mds.dts
>> create mode 100644 arch/powerpc/boot/dts/mpc8379_mds.dts
>>
>> diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/ 
>> boot/dts/mpc8377_mds.dts
>> new file mode 100644
>> index 0000000..919ffd0
>> --- /dev/null
>> +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
> [snip]
>> +	aliases {
>> +		ethernet0 = "/soc at e0000000/ethernet at 24000";
>> +		ethernet1 = "/soc at e0000000/ethernet at 25000";
>> +		serial0 = "/soc at e0000000/serial at 4500";
>> +		serial1 = "/soc at e0000000/serial at 4600";
>> +		pci0 = "/pci at e0008500";
>
> You can use path references for these now.
>
>> +	};
>> +
>> +	cpus {
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +
>> +		PowerPC,837x at 0 {
>
> This should absolutely not have a "x" in it.  Either have an exact
> model, or just use "cpu at 9" (in which case you can put the model in
> "compatible").
>
> [snip]
>> +		i2c at 3000 {
>> +			device_type = "i2c";
>
> Drop the device_type.  No "i2c" device_type class is defined.
>
> [snip]
>> +		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
>> +		usb at 23000 {
>> +			device_type = "usb";
>
> Drop device_type here too.
>
>> +			compatible = "fsl-usb2-dr";
>> +			reg = <23000 1000>;
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			interrupt-parent = < &ipic >;
>> +			interrupts = <26 8>;
>> +			phy_type = "utmi_wide";
>> +		};
>> +
>> +		mdio at 24520 {
>> +			device_type = "mdio";
>> +			compatible = "gianfar";
>
> Grr... not your fault, but this crap in the gianfar driver where it
> uses the same compatible property for the mdio and MAC has to be
> fixed.

I've fixed this now.  Look at my tree/patch.

> [snip]
>
>> +		serial1:serial at 4600 {
>
> Standard style puts a space after the colon.
>
>> +			device_type = "serial";
>> +			compatible = "ns16550";
>> +			reg = <4600 100>;
>> +			clock-frequency = <0>;
>> +			interrupts = <a 8>;
>> +			interrupt-parent = < &ipic >;
>> +		};
>> +
>> +		crypto at 30000 {
>> +			model = "SEC3";
>> +			compatible = "talitos";
>
> This driver, also, needs fixing to recognize a better formatted
> compatible property.

Can you respin with David's changes as well as mirror my cleanup of  
the other 83xx/85xx .dts

- k



More information about the Linuxppc-dev mailing list