[PATCH 3/3] [POWERPC] MPC8360E-RDK: add support for NAND on UPM

Anton Vorontsov avorontsov at ru.mvista.com
Sat Dec 22 07:41:43 EST 2007


Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
---
 arch/powerpc/boot/dts/mpc836x_rdk.dts |   19 +++++++++++++++++--
 arch/powerpc/platforms/83xx/Kconfig   |    1 +
 2 files changed, 18 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index 3f8d2b0..43420b1 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -126,7 +126,8 @@
 			reg = <0x700 0x100>;
 		};
 
-		par_io at 1400 {
+		qe_pio: par_io at 1400 {
+			#gpio-cells = <2>;
 			compatible = "fsl,qe-pario";
 			reg = <0x1400 0x100>;
 			num-ports = <7>;
@@ -292,7 +293,8 @@
 		compatible = "fsl,mpc8360-localbus",
 			     "fsl,pq2pro-localbus";
 		reg = <0xe0005000 0xd8>;
-		ranges = <0 0 0xff800000 0x800000>;
+		ranges = <0 0 0xff800000 0x800000
+			  1 0 0x60000000 0x001000>;
 
 		nor-flash at 0,0 {
 			compatible = "intel,PC28F640P30T85", "cfi-flash";
@@ -300,6 +302,19 @@
 			bank-width = <2>;
 			device-width = <1>;
 		};
+
+		nand-flash at 1,0 {
+			compatible = "stmicro,NAND512W3A2BN6E", "fsl,upm-nand";
+			reg = <1 0 1>;
+			width = <1>;
+			upm = "A";
+			upm-addr-offset = <16>;
+			upm-cmd-offset = <8>;
+			gpios = <4 18>;
+			gpio-parent = <&qe_pio>;
+			wait-pattern;
+			wait-write;
+		};
 	};
 
 	pci0: pci at e0008500 {
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 0d5a87c..723a8fe 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -88,6 +88,7 @@ config PPC_MPC836x
 	bool
 	select PPC_UDBG_16550
 	select PPC_INDIRECT_PCI
+	select FSL_UPM
 	default y if MPC836x_MDS || MPC836x_RDK
 
 config PPC_MPC837x
-- 
1.5.2.2



More information about the Linuxppc-dev mailing list