[PATCH] include/asm-powerpc/: Spelling fixes
Joe Perches
joe at perches.com
Tue Dec 18 06:30:13 EST 2007
Signed-off-by: Joe Perches <joe at perches.com>
---
include/asm-powerpc/8xx_immap.h | 2 +-
include/asm-powerpc/commproc.h | 2 +-
include/asm-powerpc/iseries/hv_lp_event.h | 2 +-
include/asm-powerpc/reg_booke.h | 2 +-
include/asm-powerpc/smu.h | 12 ++++++------
include/asm-powerpc/spu.h | 2 +-
include/asm-powerpc/spu_csa.h | 2 +-
7 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/include/asm-powerpc/8xx_immap.h b/include/asm-powerpc/8xx_immap.h
index 1311cef..4b0e152 100644
--- a/include/asm-powerpc/8xx_immap.h
+++ b/include/asm-powerpc/8xx_immap.h
@@ -123,7 +123,7 @@ typedef struct mem_ctlr {
#define OR_G5LA 0x00000400 /* Output #GPL5 on #GPL_A5 */
#define OR_G5LS 0x00000200 /* Drive #GPL high on falling edge of...*/
#define OR_BI 0x00000100 /* Burst inhibit */
-#define OR_SCY_MSK 0x000000f0 /* Cycle Lenght in Clocks */
+#define OR_SCY_MSK 0x000000f0 /* Cycle Length in Clocks */
#define OR_SCY_0_CLK 0x00000000 /* 0 clock cycles wait states */
#define OR_SCY_1_CLK 0x00000010 /* 1 clock cycles wait states */
#define OR_SCY_2_CLK 0x00000020 /* 2 clock cycles wait states */
diff --git a/include/asm-powerpc/commproc.h b/include/asm-powerpc/commproc.h
index a2328b8..0e192cc 100644
--- a/include/asm-powerpc/commproc.h
+++ b/include/asm-powerpc/commproc.h
@@ -693,7 +693,7 @@ typedef struct risc_timer_pram {
#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
-#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrrupt */
+#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
#define CICR_IEN ((uint)0x00000080) /* Int. enable */
#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
diff --git a/include/asm-powerpc/iseries/hv_lp_event.h b/include/asm-powerpc/iseries/hv_lp_event.h
index 6ce2ce1..8f5da7d 100644
--- a/include/asm-powerpc/iseries/hv_lp_event.h
+++ b/include/asm-powerpc/iseries/hv_lp_event.h
@@ -78,7 +78,7 @@ extern int HvLpEvent_openPath(HvLpEvent_Type eventType, HvLpIndex lpIndex);
/*
* Close an Lp Event Path for a type and partition
- * returns 0 on sucess
+ * returns 0 on success
*/
extern int HvLpEvent_closePath(HvLpEvent_Type eventType, HvLpIndex lpIndex);
diff --git a/include/asm-powerpc/reg_booke.h b/include/asm-powerpc/reg_booke.h
index 8fdc2b4..5e551f4 100644
--- a/include/asm-powerpc/reg_booke.h
+++ b/include/asm-powerpc/reg_booke.h
@@ -293,7 +293,7 @@
#define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */
#define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */
#define ESR_PIL 0x08000000 /* Program Exception - Illegal */
-#define ESR_PPR 0x04000000 /* Program Exception - Priveleged */
+#define ESR_PPR 0x04000000 /* Program Exception - Privileged */
#define ESR_PTR 0x02000000 /* Program Exception - Trap */
#define ESR_FP 0x01000000 /* Floating Point Operation */
#define ESR_DST 0x00800000 /* Storage Exception - Data miss */
diff --git a/include/asm-powerpc/smu.h b/include/asm-powerpc/smu.h
index e49f644..bcdd311 100644
--- a/include/asm-powerpc/smu.h
+++ b/include/asm-powerpc/smu.h
@@ -22,7 +22,7 @@
* Partition info commands
*
* These commands are used to retrieve the sdb-partition-XX datas from
- * the SMU. The lenght is always 2. First byte is the subcommand code
+ * the SMU. The length is always 2. First byte is the subcommand code
* and second byte is the partition ID.
*
* The reply is 6 bytes:
@@ -173,12 +173,12 @@
* Power supply control
*
* The "sub" command is an ASCII string in the data, the
- * data lenght is that of the string.
+ * data length is that of the string.
*
* The VSLEW command can be used to get or set the voltage slewing.
- * - lenght 5 (only "VSLEW") : it returns "DONE" and 3 bytes of
+ * - length 5 (only "VSLEW") : it returns "DONE" and 3 bytes of
* reply at data offset 6, 7 and 8.
- * - lenght 8 ("VSLEWxyz") has 3 additional bytes appended, and is
+ * - length 8 ("VSLEWxyz") has 3 additional bytes appended, and is
* used to set the voltage slewing point. The SMU replies with "DONE"
* I yet have to figure out their exact meaning of those 3 bytes in
* both cases. They seem to be:
@@ -564,13 +564,13 @@ struct smu_user_cmd_hdr
__u8 cmd; /* SMU command byte */
__u8 pad[3]; /* padding */
- __u32 data_len; /* Lenght of data following */
+ __u32 data_len; /* Length of data following */
};
struct smu_user_reply_hdr
{
__u32 status; /* Command status */
- __u32 reply_len; /* Lenght of data follwing */
+ __u32 reply_len; /* Length of data follwing */
};
#endif /* _SMU_H */
diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h
index b1accce..85ee4ca 100644
--- a/include/asm-powerpc/spu.h
+++ b/include/asm-powerpc/spu.h
@@ -299,7 +299,7 @@ int spu_switch_event_register(struct notifier_block * n);
int spu_switch_event_unregister(struct notifier_block * n);
/*
- * This defines the Local Store, Problem Area and Privlege Area of an SPU.
+ * This defines the Local Store, Problem Area and Privilege Area of an SPU.
*/
union mfc_tag_size_class_cmd {
diff --git a/include/asm-powerpc/spu_csa.h b/include/asm-powerpc/spu_csa.h
index e87794d..867bc26 100644
--- a/include/asm-powerpc/spu_csa.h
+++ b/include/asm-powerpc/spu_csa.h
@@ -194,7 +194,7 @@ struct spu_priv1_collapsed {
};
/*
- * struct spu_priv2_collapsed - condensed priviliged 2 area, w/o pads.
+ * struct spu_priv2_collapsed - condensed privileged 2 area, w/o pads.
*/
struct spu_priv2_collapsed {
u64 slb_index_W;
--
1.5.3.7.949.g2221a6
More information about the Linuxppc-dev
mailing list