[PATCH 5/21] [POWERPC] 4xx PLB to PCI Express support
Benjamin Herrenschmidt
benh at kernel.crashing.org
Fri Dec 21 15:39:24 EST 2007
This adds to the previous 2 patches the support for the 4xx PCI Express
cells as found in the 440SPe revA, revB and 405EX.
Unfortunately, due to significant differences between these, and other
interesting "features" of those pieces of HW, the code isn't as simple
as it is for PCI and PCI-X and some of the functions differ significantly
between the 3 implementations. Thus, not only this code can only support
those 3 implementations for now and will refuse to operate on any other,
but there are added ifdef's to avoid the bloat of building a fairly large
amount of code on platforms that don't need it.
Also, this code currently only supports fully initializing root complex
nodes, not endpoint. Some more code will have to be lifted from the
arch/ppc implementation to add the endpoint support, though it's mostly
differences in memory mapping, and the question on how to represent
endpoint mode PCI in the device-tree is thus open.
Many thanks to Stefan Roese for testing & fixing up the 405EX bits !
Signed-off-by: Benjamin Herrenschmidt <benh at kernel.crashing.org>
Signed-off-by: Stefan Roese <sr at denx.de>
---
arch/powerpc/Kconfig | 1
arch/powerpc/sysdev/Kconfig | 8
arch/powerpc/sysdev/ppc4xx_pci.c | 994 ++++++++++++++++++++++++++++++++++++++-
arch/powerpc/sysdev/ppc4xx_pci.h | 242 +++++++++
4 files changed, 1227 insertions(+), 18 deletions(-)
--- linux-merge.orig/arch/powerpc/sysdev/ppc4xx_pci.c 2007-12-14 15:49:43.000000000 +1100
+++ linux-merge/arch/powerpc/sysdev/ppc4xx_pci.c 2007-12-14 15:49:43.000000000 +1100
@@ -3,16 +3,31 @@
*
* Copyright 2007 Ben. Herrenschmidt <benh at kernel.crashing.org>, IBM Corp.
*
+ * Most PCI Express code is coming from Stefan Roese implementation for
+ * arch/ppc in the Denx tree, slightly reworked by me.
+ *
+ * Copyright 2007 DENX Software Engineering, Stefan Roese <sr at denx.de>
+ *
+ * Some of that comes itself from a previous implementation for 440SPE only
+ * by Roland Dreier:
+ *
+ * Copyright (c) 2005 Cisco Systems. All rights reserved.
+ * Roland Dreier <rolandd at cisco.com>
+ *
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/of.h>
+#include <linux/bootmem.h>
+#include <linux/delay.h>
#include <asm/io.h>
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
+#include <asm/dcr.h>
+#include <asm/dcr-regs.h>
#include "ppc4xx_pci.h"
@@ -21,6 +36,17 @@ static int dma_offset_set;
/* Move that to a useable header */
extern unsigned long total_memory;
+#define U64_TO_U32_LOW(val) ((u32)((val) & 0x00000000ffffffffULL))
+#define U64_TO_U32_HIGH(val) ((u32)((val) >> 32))
+
+#ifdef CONFIG_RESOURCES_64BIT
+#define RES_TO_U32_LOW(val) U64_TO_U32_LOW(val)
+#define RES_TO_U32_HIGH(val) U64_TO_U32_HIGH(val)
+#else
+#define RES_TO_U32_LOW(val) (val)
+#define RES_TO_U32_HIGH(val) (0)
+#endif
+
static void fixup_ppc4xx_pci_bridge(struct pci_dev *dev)
{
struct pci_controller *hose;
@@ -178,13 +204,8 @@ static void __init ppc4xx_configure_pci_
/* Calculate register values */
la = res->start;
-#ifdef CONFIG_RESOURCES_64BIT
- pciha = (res->start - hose->pci_mem_offset) >> 32;
- pcila = (res->start - hose->pci_mem_offset) & 0xffffffffu;
-#else
- pciha = 0;
- pcila = res->start - hose->pci_mem_offset;
-#endif
+ pciha = RES_TO_U32_HIGH(res->start - hose->pci_mem_offset);
+ pcila = RES_TO_U32_LOW(res->start - hose->pci_mem_offset);
ma = res->end + 1 - res->start;
if (!is_power_of_2(ma) || ma < 0x1000 || ma > 0xffffffffu) {
@@ -333,16 +354,10 @@ static void __init ppc4xx_configure_pcix
}
/* Calculate register values */
-#ifdef CONFIG_RESOURCES_64BIT
- lah = res->start >> 32;
- lal = res->start & 0xffffffffu;
- pciah = (res->start - hose->pci_mem_offset) >> 32;
- pcial = (res->start - hose->pci_mem_offset) & 0xffffffffu;
-#else
- lah = pciah = 0;
- lal = res->start;
- pcial = res->start - hose->pci_mem_offset;
-#endif
+ lah = RES_TO_U32_HIGH(res->start);
+ lal = RES_TO_U32_LOW(res->start);
+ pciah = RES_TO_U32_HIGH(res->start - hose->pci_mem_offset);
+ pcial = RES_TO_U32_LOW(res->start - hose->pci_mem_offset);
sa = res->end + 1 - res->start;
if (!is_power_of_2(sa) || sa < 0x100000 ||
sa > 0xffffffffu) {
@@ -492,20 +507,963 @@ static void __init ppc4xx_probe_pcix_bri
iounmap(reg);
}
+#ifdef CONFIG_PPC4xx_PCI_EXPRESS
+
/*
* 4xx PCI-Express part
+ *
+ * We support 3 parts currently based on the compatible property:
+ *
+ * ibm,plb-pciex-440speA
+ * ibm,plb-pciex-440speB
+ * ibm,plb-pciex-405ex
+ *
+ * Anything else will be rejected for now as they are all subtly
+ * different unfortunately.
+ *
*/
+
+#define MAX_PCIE_BUS_MAPPED 0x10
+
+struct ppc4xx_pciex_port
+{
+ struct pci_controller *hose;
+ struct device_node *node;
+ unsigned int index;
+ int endpoint;
+ unsigned int sdr_base;
+ dcr_host_t dcrs;
+ struct resource cfg_space;
+ struct resource utl_regs;
+};
+
+static struct ppc4xx_pciex_port *ppc4xx_pciex_ports;
+static unsigned int ppc4xx_pciex_port_count;
+
+struct ppc4xx_pciex_hwops
+{
+ int (*core_init)(struct device_node *np);
+ int (*port_init_hw)(struct ppc4xx_pciex_port *port);
+ int (*setup_utl)(struct ppc4xx_pciex_port *port);
+};
+
+static struct ppc4xx_pciex_hwops *ppc4xx_pciex_hwops;
+
+#ifdef CONFIG_44x
+
+/* Check various reset bits of the 440SPe PCIe core */
+static int __init ppc440spe_pciex_check_reset(struct device_node *np)
+{
+ u32 valPE0, valPE1, valPE2;
+ int err = 0;
+
+ /* SDR0_PEGPLLLCT1 reset */
+ if (!(mfdcri(SDR0, PESDR0_PLLLCT1) & 0x01000000)) {
+ /*
+ * the PCIe core was probably already initialised
+ * by firmware - let's re-reset RCSSET regs
+ *
+ * -- Shouldn't we also re-reset the whole thing ? -- BenH
+ */
+ pr_debug("PCIE: SDR0_PLLLCT1 already reset.\n");
+ mtdcri(SDR0, PESDR0_440SPE_RCSSET, 0x01010000);
+ mtdcri(SDR0, PESDR1_440SPE_RCSSET, 0x01010000);
+ mtdcri(SDR0, PESDR2_440SPE_RCSSET, 0x01010000);
+ }
+
+ valPE0 = mfdcri(SDR0, PESDR0_440SPE_RCSSET);
+ valPE1 = mfdcri(SDR0, PESDR1_440SPE_RCSSET);
+ valPE2 = mfdcri(SDR0, PESDR2_440SPE_RCSSET);
+
+ /* SDR0_PExRCSSET rstgu */
+ if (!(valPE0 & 0x01000000) ||
+ !(valPE1 & 0x01000000) ||
+ !(valPE2 & 0x01000000)) {
+ printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstgu error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET rstdl */
+ if (!(valPE0 & 0x00010000) ||
+ !(valPE1 & 0x00010000) ||
+ !(valPE2 & 0x00010000)) {
+ printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstdl error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET rstpyn */
+ if ((valPE0 & 0x00001000) ||
+ (valPE1 & 0x00001000) ||
+ (valPE2 & 0x00001000)) {
+ printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstpyn error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET hldplb */
+ if ((valPE0 & 0x10000000) ||
+ (valPE1 & 0x10000000) ||
+ (valPE2 & 0x10000000)) {
+ printk(KERN_INFO "PCIE: SDR0_PExRCSSET hldplb error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET rdy */
+ if ((valPE0 & 0x00100000) ||
+ (valPE1 & 0x00100000) ||
+ (valPE2 & 0x00100000)) {
+ printk(KERN_INFO "PCIE: SDR0_PExRCSSET rdy error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET shutdown */
+ if ((valPE0 & 0x00000100) ||
+ (valPE1 & 0x00000100) ||
+ (valPE2 & 0x00000100)) {
+ printk(KERN_INFO "PCIE: SDR0_PExRCSSET shutdown error\n");
+ err = -1;
+ }
+
+ return err;
+}
+
+/* Global PCIe core initializations for 440SPe core */
+static int __init ppc440spe_pciex_core_init(struct device_node *np)
+{
+ int time_out = 20;
+
+ /* Set PLL clock receiver to LVPECL */
+ mtdcri(SDR0, PESDR0_PLLLCT1, mfdcri(SDR0, PESDR0_PLLLCT1) | 1 << 28);
+
+ /* Shouldn't we do all the calibration stuff etc... here ? */
+ if (ppc440spe_pciex_check_reset(np))
+ return -ENXIO;
+
+ if (!(mfdcri(SDR0, PESDR0_PLLLCT2) & 0x10000)) {
+ printk(KERN_INFO "PCIE: PESDR_PLLCT2 resistance calibration "
+ "failed (0x%08x)\n",
+ mfdcri(SDR0, PESDR0_PLLLCT2));
+ return -1;
+ }
+
+ /* De-assert reset of PCIe PLL, wait for lock */
+ mtdcri(SDR0, PESDR0_PLLLCT1,
+ mfdcri(SDR0, PESDR0_PLLLCT1) & ~(1 << 24));
+ udelay(3);
+
+ while (time_out) {
+ if (!(mfdcri(SDR0, PESDR0_PLLLCT3) & 0x10000000)) {
+ time_out--;
+ udelay(1);
+ } else
+ break;
+ }
+ if (!time_out) {
+ printk(KERN_INFO "PCIE: VCO output not locked\n");
+ return -1;
+ }
+
+ pr_debug("PCIE initialization OK\n");
+
+ return 3;
+}
+
+static int ppc440spe_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+ u32 val = 1 << 24;
+
+ if (port->endpoint)
+ val = PTYPE_LEGACY_ENDPOINT << 20;
+ else
+ val = PTYPE_ROOT_PORT << 20;
+
+ if (port->index == 0)
+ val |= LNKW_X8 << 12;
+ else
+ val |= LNKW_X4 << 12;
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, val);
+ mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, 0x20222222);
+ if (of_device_is_compatible(port->node, "ibm,plb-pciex-440speA"))
+ mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x11000000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL0SET1, 0x35000000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL1SET1, 0x35000000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL2SET1, 0x35000000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL3SET1, 0x35000000);
+ if (port->index == 0) {
+ mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL4SET1,
+ 0x35000000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL5SET1,
+ 0x35000000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL6SET1,
+ 0x35000000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL7SET1,
+ 0x35000000);
+ }
+ val = mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET);
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+ (val & ~(1 << 24 | 1 << 16)) | 1 << 12);
+
+ return 0;
+}
+
+static int ppc440speA_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
+ void __iomem *utl_base;
+
+ /* XXX Check what that value means... I hate magic */
+ dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x68782800);
+
+ utl_base = ioremap(port->utl_regs.start, 0x100);
+ BUG_ON(utl_base == NULL);
+
+ /*
+ * Set buffer allocations and then assert VRB and TXE.
+ */
+ out_be32(utl_base + PEUTL_OUTTR, 0x08000000);
+ out_be32(utl_base + PEUTL_INTR, 0x02000000);
+ out_be32(utl_base + PEUTL_OPDBSZ, 0x10000000);
+ out_be32(utl_base + PEUTL_PBBSZ, 0x53000000);
+ out_be32(utl_base + PEUTL_IPHBSZ, 0x08000000);
+ out_be32(utl_base + PEUTL_IPDBSZ, 0x10000000);
+ out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
+ out_be32(utl_base + PEUTL_PCTL, 0x80800066);
+
+ iounmap(utl_base);
+
+ return 0;
+}
+
+static struct ppc4xx_pciex_hwops ppc440speA_pcie_hwops __initdata =
+{
+ .core_init = ppc440spe_pciex_core_init,
+ .port_init_hw = ppc440spe_pciex_init_port_hw,
+ .setup_utl = ppc440speA_pciex_init_utl,
+};
+
+static struct ppc4xx_pciex_hwops ppc440speB_pcie_hwops __initdata =
+{
+ .core_init = ppc440spe_pciex_core_init,
+ .port_init_hw = ppc440spe_pciex_init_port_hw,
+};
+
+
+#endif /* CONFIG_44x */
+
+#ifdef CONFIG_40x
+
+static int __init ppc405ex_pciex_core_init(struct device_node *np)
+{
+ /* Nothing to do, return 2 ports */
+ return 2;
+}
+
+static void ppc405ex_pcie_phy_reset(struct ppc4xx_pciex_port *port)
+{
+ /* Assert the PE0_PHY reset */
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x01010000);
+ msleep(1);
+
+ /* deassert the PE0_hotreset */
+ if (port->endpoint)
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x01111000);
+ else
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x01101000);
+
+ /* poll for phy !reset */
+ /* XXX FIXME add timeout */
+ while (!(mfdcri(SDR0, port->sdr_base + PESDRn_405EX_PHYSTA) & 0x00001000))
+ ;
+
+ /* deassert the PE0_gpl_utl_reset */
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x00101000);
+}
+
+static int ppc405ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+ u32 val;
+
+ if (port->endpoint)
+ val = PTYPE_LEGACY_ENDPOINT;
+ else
+ val = PTYPE_ROOT_PORT;
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET,
+ 1 << 24 | val << 20 | LNKW_X1 << 12);
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, 0x00000000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x01010000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_405EX_PHYSET1, 0x720F0000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_405EX_PHYSET2, 0x70600003);
+
+ /*
+ * Only reset the PHY when no link is currently established.
+ * This is for the Atheros PCIe board which has problems to establish
+ * the link (again) after this PHY reset. All other currently tested
+ * PCIe boards don't show this problem.
+ * This has to be re-tested and fixed in a later release!
+ */
+#if 0 /* XXX FIXME: Not resetting the PHY will leave all resources
+ * configured as done previously by U-Boot. Then Linux will currently
+ * not reassign them. So the PHY reset is now done always. This will
+ * lead to problems with the Atheros PCIe board again.
+ */
+ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
+ if (!(val & 0x00001000))
+ ppc405ex_pcie_phy_reset(port);
+#else
+ ppc405ex_pcie_phy_reset(port);
+#endif
+
+ dcr_write(port->dcrs, DCRO_PEGPL_CFG, 0x10000000); /* guarded on */
+
+ return 0;
+}
+
+static int ppc405ex_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
+ void __iomem *utl_base;
+
+ dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x0);
+
+ utl_base = ioremap(port->utl_regs.start, 0x100);
+ BUG_ON(utl_base == NULL);
+
+ /*
+ * Set buffer allocations and then assert VRB and TXE.
+ */
+ out_be32(utl_base + PEUTL_OUTTR, 0x02000000);
+ out_be32(utl_base + PEUTL_INTR, 0x02000000);
+ out_be32(utl_base + PEUTL_OPDBSZ, 0x04000000);
+ out_be32(utl_base + PEUTL_PBBSZ, 0x21000000);
+ out_be32(utl_base + PEUTL_IPHBSZ, 0x02000000);
+ out_be32(utl_base + PEUTL_IPDBSZ, 0x04000000);
+ out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
+ out_be32(utl_base + PEUTL_PCTL, 0x80800066);
+
+ out_be32(utl_base + PEUTL_PBCTL, 0x0800000c);
+ out_be32(utl_base + PEUTL_RCSTA,
+ in_be32(utl_base + PEUTL_RCSTA) | 0x000040000);
+
+ iounmap(utl_base);
+
+ return 0;
+}
+
+static struct ppc4xx_pciex_hwops ppc405ex_pcie_hwops __initdata =
+{
+ .core_init = ppc405ex_pciex_core_init,
+ .port_init_hw = ppc405ex_pciex_init_port_hw,
+ .setup_utl = ppc405ex_pciex_init_utl,
+};
+
+#endif /* CONFIG_40x */
+
+
+/* Check that the core has been initied and if not, do it */
+static int __init ppc4xx_pciex_check_core_init(struct device_node *np)
+{
+ static int core_init;
+ int count = -ENODEV;
+
+ if (core_init++)
+ return 0;
+
+#ifdef CONFIG_44x
+ if (of_device_is_compatible(np, "ibm,plb-pciex-440speA"))
+ ppc4xx_pciex_hwops = &ppc440speA_pcie_hwops;
+ else if (of_device_is_compatible(np, "ibm,plb-pciex-440speB"))
+ ppc4xx_pciex_hwops = &ppc440speB_pcie_hwops;
+#endif /* CONFIG_44x */
+#ifdef CONFIG_40x
+ if (of_device_is_compatible(np, "ibm,plb-pciex-405ex"))
+ ppc4xx_pciex_hwops = &ppc405ex_pcie_hwops;
+#endif
+ if (ppc4xx_pciex_hwops == NULL) {
+ printk(KERN_WARNING "PCIE: unknown host type %s\n",
+ np->full_name);
+ return -ENODEV;
+ }
+
+ count = ppc4xx_pciex_hwops->core_init(np);
+ if (count > 0) {
+ ppc4xx_pciex_ports =
+ kzalloc(count * sizeof(struct ppc4xx_pciex_port),
+ GFP_KERNEL);
+ if (ppc4xx_pciex_ports) {
+ ppc4xx_pciex_port_count = count;
+ return 0;
+ }
+ printk(KERN_WARNING "PCIE: failed to allocate ports array\n");
+ return -ENOMEM;
+ }
+ return -ENODEV;
+}
+
+static void __init ppc4xx_pciex_port_init_mapping(struct ppc4xx_pciex_port *port)
+{
+ /* We map PCI Express configuration based on the reg property */
+ dcr_write(port->dcrs, DCRO_PEGPL_CFGBAH,
+ RES_TO_U32_HIGH(port->cfg_space.start));
+ dcr_write(port->dcrs, DCRO_PEGPL_CFGBAL,
+ RES_TO_U32_LOW(port->cfg_space.start));
+
+ /* XXX FIXME: Use size from reg property. For now, map 512M */
+ dcr_write(port->dcrs, DCRO_PEGPL_CFGMSK, 0xe0000001);
+
+ /* We map UTL registers based on the reg property */
+ dcr_write(port->dcrs, DCRO_PEGPL_REGBAH,
+ RES_TO_U32_HIGH(port->utl_regs.start));
+ dcr_write(port->dcrs, DCRO_PEGPL_REGBAL,
+ RES_TO_U32_LOW(port->utl_regs.start));
+
+ /* XXX FIXME: Use size from reg property */
+ dcr_write(port->dcrs, DCRO_PEGPL_REGMSK, 0x00007001);
+
+ /* Disable all other outbound windows */
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, 0);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKL, 0);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKL, 0);
+ dcr_write(port->dcrs, DCRO_PEGPL_MSGMSK, 0);
+}
+
+static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port)
+{
+ int attempts, rc = 0;
+ u32 val;
+
+ /* Check if it's endpoint or root complex
+ *
+ * XXX Do we want to use the device-tree instead ? --BenH.
+ */
+ val = mfdcri(SDR0, port->sdr_base + PESDRn_DLPSET);
+ port->endpoint = (((val >> 20) & 0xf) != PTYPE_ROOT_PORT);
+
+ /* Init HW */
+ if (ppc4xx_pciex_hwops->port_init_hw)
+ rc = ppc4xx_pciex_hwops->port_init_hw(port);
+ if (rc != 0)
+ return rc;
+
+ /*
+ * Notice: the following delay has critical impact on device
+ * initialization - if too short (<50ms) the link doesn't get up.
+ *
+ * XXX FIXME: There are various issues with that link up thingy,
+ * we could just wait for the link with a timeout but Stefan says
+ * some cards need more time even after the link is up. I'll
+ * investigate. For now, we keep a fixed 1s delay.
+ *
+ * Ultimately, it should be made asynchronous so all ports are
+ * brought up simultaneously though.
+ */
+ printk(KERN_INFO "PCIE%d: Waiting for link to go up...\n",
+ port->index);
+ msleep(1000);
+
+ /*
+ * Check that we exited the reset state properly
+ */
+ val = mfdcri(SDR0, port->sdr_base + PESDRn_RCSSTS);
+ if (val & (1 << 20)) {
+ printk(KERN_WARNING "PCIE%d: PGRST failed %08x\n",
+ port->index, val);
+ return -1;
+ }
+
+ /*
+ * Verify link is up
+ */
+ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
+ if (!(val & 0x00001000)) {
+ printk(KERN_INFO "PCIE%d: link is not up !\n",
+ port->index);
+ return -1;
+ }
+
+ printk(KERN_INFO "PCIE%d: link is up !\n",
+ port->index);
+
+ /*
+ * Initialize mapping: disable all regions and configure
+ * CFG and REG regions based on resources in the device tree
+ */
+ ppc4xx_pciex_port_init_mapping(port);
+
+ /*
+ * Setup UTL registers - but only on revA!
+ * We use default settings for revB chip.
+ *
+ * To be reworked. We may also be able to move that to
+ * before the link wait
+ * --BenH.
+ */
+ if (ppc4xx_pciex_hwops->setup_utl)
+ ppc4xx_pciex_hwops->setup_utl(port);
+
+ /*
+ * Check for VC0 active and assert RDY.
+ */
+ attempts = 10;
+ while (!(mfdcri(SDR0, port->sdr_base + PESDRn_RCSSTS) & (1 << 16))) {
+ if (!(attempts--)) {
+ printk(KERN_INFO "PCIE%d: VC0 not active\n",
+ port->index);
+ return -1;
+ }
+ msleep(1000);
+ }
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+ mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) | 1 << 20);
+ msleep(100);
+
+ return 0;
+}
+
+static int ppc4xx_pciex_validate_bdf(struct ppc4xx_pciex_port *port,
+ struct pci_bus *bus,
+ unsigned int devfn)
+{
+ static int message;
+
+ /* Endpoint can not generate upstream(remote) config cycles */
+ if (port->endpoint && bus->number != port->hose->first_busno)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /* Check we are within the mapped range */
+ if (bus->number > port->hose->last_busno) {
+ if (!message) {
+ printk(KERN_WARNING "Warning! Probing bus %u"
+ " out of range !\n", bus->number);
+ message++;
+ }
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ /* The root complex has only one device / function */
+ if (bus->number == port->hose->first_busno && devfn != 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /* The other side of the RC has only one device as well */
+ if (bus->number == (port->hose->first_busno + 1) &&
+ PCI_SLOT(devfn) != 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return 0;
+}
+
+static void __iomem *ppc4xx_pciex_get_config_base(struct ppc4xx_pciex_port *port,
+ struct pci_bus *bus,
+ unsigned int devfn)
+{
+ int relbus;
+
+ /* Remove the casts when we finally remove the stupid volatile
+ * in struct pci_controller
+ */
+ if (bus->number == port->hose->first_busno)
+ return (void __iomem *)port->hose->cfg_addr;
+
+ relbus = bus->number - (port->hose->first_busno + 1);
+ return (void __iomem *)port->hose->cfg_data +
+ ((relbus << 20) | (devfn << 12));
+}
+
+static int ppc4xx_pciex_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val)
+{
+ struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
+ struct ppc4xx_pciex_port *port =
+ &ppc4xx_pciex_ports[hose->indirect_type];
+ void __iomem *addr;
+ u32 gpl_cfg;
+
+ BUG_ON(hose != port->hose);
+
+ if (ppc4xx_pciex_validate_bdf(port, bus, devfn) != 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ addr = ppc4xx_pciex_get_config_base(port, bus, devfn);
+
+ /*
+ * Reading from configuration space of non-existing device can
+ * generate transaction errors. For the read duration we suppress
+ * assertion of machine check exceptions to avoid those.
+ */
+ gpl_cfg = dcr_read(port->dcrs, DCRO_PEGPL_CFG);
+ dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg | GPL_DMER_MASK_DISA);
+
+ switch (len) {
+ case 1:
+ *val = in_8((u8 *)(addr + offset));
+ break;
+ case 2:
+ *val = in_le16((u16 *)(addr + offset));
+ break;
+ default:
+ *val = in_le32((u32 *)(addr + offset));
+ break;
+ }
+
+ pr_debug("pcie-config-read: bus=%3d [%3d..%3d] devfn=0x%04x"
+ " offset=0x%04x len=%d, addr=0x%p val=0x%08x\n",
+ bus->number, hose->first_busno, hose->last_busno,
+ devfn, offset, len, addr + offset, *val);
+
+ dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int ppc4xx_pciex_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
+{
+ struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
+ struct ppc4xx_pciex_port *port =
+ &ppc4xx_pciex_ports[hose->indirect_type];
+ void __iomem *addr;
+ u32 gpl_cfg;
+
+ if (ppc4xx_pciex_validate_bdf(port, bus, devfn) != 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ addr = ppc4xx_pciex_get_config_base(port, bus, devfn);
+
+ /*
+ * Reading from configuration space of non-existing device can
+ * generate transaction errors. For the read duration we suppress
+ * assertion of machine check exceptions to avoid those.
+ */
+ gpl_cfg = dcr_read(port->dcrs, DCRO_PEGPL_CFG);
+ dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg | GPL_DMER_MASK_DISA);
+
+ pr_debug("pcie-config-write: bus=%3d [%3d..%3d] devfn=0x%04x"
+ " offset=0x%04x len=%d, addr=0x%p val=0x%08x\n",
+ bus->number, hose->first_busno, hose->last_busno,
+ devfn, offset, len, addr + offset, val);
+
+ switch (len) {
+ case 1:
+ out_8((u8 *)(addr + offset), val);
+ break;
+ case 2:
+ out_le16((u16 *)(addr + offset), val);
+ break;
+ default:
+ out_le32((u32 *)(addr + offset), val);
+ break;
+ }
+
+ dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops ppc4xx_pciex_pci_ops =
+{
+ .read = ppc4xx_pciex_read_config,
+ .write = ppc4xx_pciex_write_config,
+};
+
+static void __init ppc4xx_configure_pciex_POMs(struct ppc4xx_pciex_port *port,
+ struct pci_controller *hose,
+ void __iomem *mbase)
+{
+ u32 lah, lal, pciah, pcial, sa;
+ int i, j;
+
+ /* Setup outbound memory windows */
+ for (i = j = 0; i < 3; i++) {
+ struct resource *res = &hose->mem_resources[i];
+
+ /* we only care about memory windows */
+ if (!(res->flags & IORESOURCE_MEM))
+ continue;
+ if (j > 1) {
+ printk(KERN_WARNING "%s: Too many ranges\n",
+ port->node->full_name);
+ break;
+ }
+
+ /* Calculate register values */
+ lah = RES_TO_U32_HIGH(res->start);
+ lal = RES_TO_U32_LOW(res->start);
+ pciah = RES_TO_U32_HIGH(res->start - hose->pci_mem_offset);
+ pcial = RES_TO_U32_LOW(res->start - hose->pci_mem_offset);
+ sa = res->end + 1 - res->start;
+ if (!is_power_of_2(sa) || sa < 0x100000 ||
+ sa > 0xffffffffu) {
+ printk(KERN_WARNING "%s: Resource out of range\n",
+ port->node->full_name);
+ continue;
+ }
+ sa = (0xffffffffu << ilog2(sa)) | 0x1;
+
+ /* Program register values */
+ switch (j) {
+ case 0:
+ out_le32(mbase + PECFG_POM0LAH, pciah);
+ out_le32(mbase + PECFG_POM0LAL, pcial);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAH, lah);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAL, lal);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKH, 0x7fffffff);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, sa | 3);
+ break;
+ case 1:
+ out_le32(mbase + PECFG_POM1LAH, pciah);
+ out_le32(mbase + PECFG_POM1LAL, pcial);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAH, lah);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAL, lal);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKH, 0x7fffffff);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKL, sa | 3);
+ break;
+ }
+ j++;
+ }
+
+ /* Configure IO, always 64K starting at 0 */
+ if (hose->io_resource.flags & IORESOURCE_IO) {
+ lah = RES_TO_U32_HIGH(hose->io_base_phys);
+ lal = RES_TO_U32_LOW(hose->io_base_phys);
+ out_le32(mbase + PECFG_POM2LAH, 0);
+ out_le32(mbase + PECFG_POM2LAL, 0);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR3BAH, lah);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR3BAL, lal);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKH, 0x7fffffff);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKL, 0xffff0000 | 3);
+ }
+}
+
+static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port,
+ struct pci_controller *hose,
+ void __iomem *mbase,
+ struct resource *res)
+{
+ resource_size_t size = res->end - res->start + 1;
+ u64 sa;
+
+ /* Calculate window size */
+ sa = (0xffffffffffffffffull << ilog2(size));;
+ if (res->flags & IORESOURCE_PREFETCH)
+ sa |= 0x8;
+
+ out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
+ out_le32(mbase + PECFG_BAR0LMPA, RES_TO_U32_LOW(sa));
+
+ /* The setup of the split looks weird to me ... let's see if it works */
+ out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
+ out_le32(mbase + PECFG_PIM0LAH, 0x00000000);
+ out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
+ out_le32(mbase + PECFG_PIM1LAH, 0x00000000);
+ out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
+ out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
+
+ /* Enable inbound mapping */
+ out_le32(mbase + PECFG_PIMEN, 0x1);
+
+ out_le32(mbase + PCI_BASE_ADDRESS_0, RES_TO_U32_LOW(res->start));
+ out_le32(mbase + PCI_BASE_ADDRESS_1, RES_TO_U32_HIGH(res->start));
+
+ /* Enable I/O, Mem, and Busmaster cycles */
+ out_le16(mbase + PCI_COMMAND,
+ in_le16(mbase + PCI_COMMAND) |
+ PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+}
+
+static void __init ppc4xx_pciex_port_setup_hose(struct ppc4xx_pciex_port *port)
+{
+ struct resource dma_window;
+ struct pci_controller *hose = NULL;
+ const int *bus_range;
+ int primary = 0, busses;
+ void __iomem *mbase = NULL, *cfg_data = NULL;
+
+ /* XXX FIXME: Handle endpoint mode properly */
+ if (port->endpoint)
+ return;
+
+ /* Check if primary bridge */
+ if (of_get_property(port->node, "primary", NULL))
+ primary = 1;
+
+ /* Get bus range if any */
+ bus_range = of_get_property(port->node, "bus-range", NULL);
+
+ /* Allocate the host controller data structure */
+ hose = pcibios_alloc_controller(port->node);
+ if (!hose)
+ goto fail;
+
+ /* We stick the port number in "indirect_type" so the config space
+ * ops can retrieve the port data structure easily
+ */
+ hose->indirect_type = port->index;
+
+ /* Get bus range */
+ hose->first_busno = bus_range ? bus_range[0] : 0x0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+ /* Because of how big mapping the config space is (1M per bus), we
+ * limit how many busses we support. In the long run, we could replace
+ * that with something akin to kmap_atomic instead. We set aside 1 bus
+ * for the host itself too.
+ */
+ busses = hose->last_busno - hose->first_busno; /* This is off by 1 */
+ if (busses > MAX_PCIE_BUS_MAPPED) {
+ busses = MAX_PCIE_BUS_MAPPED;
+ hose->last_busno = hose->first_busno + busses;
+ }
+
+ /* We map the external config space in cfg_data and the host config
+ * space in cfg_addr. External space is 1M per bus, internal space
+ * is 4K
+ */
+ cfg_data = ioremap(port->cfg_space.start +
+ (hose->first_busno + 1) * 0x100000,
+ busses * 0x100000);
+ mbase = ioremap(port->cfg_space.start + 0x10000000, 0x1000);
+ if (cfg_data == NULL || mbase == NULL) {
+ printk(KERN_ERR "%s: Can't map config space !",
+ port->node->full_name);
+ goto fail;
+ }
+
+ hose->cfg_data = cfg_data;
+ hose->cfg_addr = mbase;
+
+ pr_debug("PCIE %s, bus %d..%d\n", port->node->full_name,
+ hose->first_busno, hose->last_busno);
+ pr_debug(" config space mapped at: root @0x%p, other @0x%p\n",
+ hose->cfg_addr, hose->cfg_data);
+
+ /* Setup config space */
+ hose->ops = &ppc4xx_pciex_pci_ops;
+ port->hose = hose;
+ mbase = (void __iomem *)hose->cfg_addr;
+
+ /*
+ * Set bus numbers on our root port
+ */
+ out_8(mbase + PCI_PRIMARY_BUS, hose->first_busno);
+ out_8(mbase + PCI_SECONDARY_BUS, hose->first_busno + 1);
+ out_8(mbase + PCI_SUBORDINATE_BUS, hose->last_busno);
+
+ /*
+ * OMRs are already reset, also disable PIMs
+ */
+ out_le32(mbase + PECFG_PIMEN, 0);
+
+ /* Parse outbound mapping resources */
+ pci_process_bridge_OF_ranges(hose, port->node, primary);
+
+ /* Parse inbound mapping resources */
+ if (ppc4xx_parse_dma_ranges(hose, mbase, &dma_window) != 0)
+ goto fail;
+
+ /* Configure outbound ranges POMs */
+ ppc4xx_configure_pciex_POMs(port, hose, mbase);
+
+ /* Configure inbound ranges PIMs */
+ ppc4xx_configure_pciex_PIMs(port, hose, mbase, &dma_window);
+
+ /* The root complex doesn't show up if we don't set some vendor
+ * and device IDs into it. Those are the same bogus one that the
+ * initial code in arch/ppc add. We might want to change that.
+ */
+ out_le16(mbase + 0x200, 0xaaa0 + port->index);
+ out_le16(mbase + 0x202, 0xbed0 + port->index);
+
+ /* Set Class Code to PCI-PCI bridge and Revision Id to 1 */
+ out_le32(mbase + 0x208, 0x06040001);
+
+ printk(KERN_INFO "PCIE%d: successfully set as root-complex\n",
+ port->index);
+ return;
+ fail:
+ if (hose)
+ pcibios_free_controller(hose);
+ if (cfg_data)
+ iounmap(cfg_data);
+ if (mbase)
+ iounmap(mbase);
+}
+
static void __init ppc4xx_probe_pciex_bridge(struct device_node *np)
{
- /* NYI */
+ struct ppc4xx_pciex_port *port;
+ const u32 *pval;
+ int portno;
+ unsigned int dcrs;
+
+ /* First, proceed to core initialization as we assume there's
+ * only one PCIe core in the system
+ */
+ if (ppc4xx_pciex_check_core_init(np))
+ return;
+
+ /* Get the port number from the device-tree */
+ pval = of_get_property(np, "port", NULL);
+ if (pval == NULL) {
+ printk(KERN_ERR "PCIE: Can't find port number for %s\n",
+ np->full_name);
+ return;
+ }
+ portno = *pval;
+ if (portno >= ppc4xx_pciex_port_count) {
+ printk(KERN_ERR "PCIE: port number out of range for %s\n",
+ np->full_name);
+ return;
+ }
+ port = &ppc4xx_pciex_ports[portno];
+ port->index = portno;
+ port->node = of_node_get(np);
+ pval = of_get_property(np, "sdr-base", NULL);
+ if (pval == NULL) {
+ printk(KERN_ERR "PCIE: missing sdr-base for %s\n",
+ np->full_name);
+ return;
+ }
+ port->sdr_base = *pval;
+
+ /* Fetch config space registers address */
+ if (of_address_to_resource(np, 0, &port->cfg_space)) {
+ printk(KERN_ERR "%s: Can't get PCI-E config space !",
+ np->full_name);
+ return;
+ }
+ /* Fetch host bridge internal registers address */
+ if (of_address_to_resource(np, 1, &port->utl_regs)) {
+ printk(KERN_ERR "%s: Can't get UTL register base !",
+ np->full_name);
+ return;
+ }
+
+ /* Map DCRs */
+ dcrs = dcr_resource_start(np, 0);
+ if (dcrs == 0) {
+ printk(KERN_ERR "%s: Can't get DCR register base !",
+ np->full_name);
+ return;
+ }
+ port->dcrs = dcr_map(np, dcrs, dcr_resource_len(np, 0));
+
+ /* Initialize the port specific registers */
+ if (ppc4xx_pciex_port_init(port))
+ return;
+
+ /* Setup the linux hose data structure */
+ ppc4xx_pciex_port_setup_hose(port);
}
+#endif /* CONFIG_PPC4xx_PCI_EXPRESS */
+
static int __init ppc4xx_pci_find_bridges(void)
{
struct device_node *np;
+#ifdef CONFIG_PPC4xx_PCI_EXPRESS
for_each_compatible_node(np, NULL, "ibm,plb-pciex")
ppc4xx_probe_pciex_bridge(np);
+#endif
for_each_compatible_node(np, NULL, "ibm,plb-pcix")
ppc4xx_probe_pcix_bridge(np);
for_each_compatible_node(np, NULL, "ibm,plb-pci")
Index: linux-merge/arch/powerpc/sysdev/ppc4xx_pci.h
===================================================================
--- linux-merge.orig/arch/powerpc/sysdev/ppc4xx_pci.h 2007-12-14 15:49:43.000000000 +1100
+++ linux-merge/arch/powerpc/sysdev/ppc4xx_pci.h 2007-12-14 15:49:43.000000000 +1100
@@ -121,5 +121,247 @@
#define PCIL0_PTM2MS 0x38
#define PCIL0_PTM2LA 0x3c
+/*
+ * 4xx PCIe bridge register definitions
+ */
+
+/* DCR offsets */
+#define DCRO_PEGPL_CFGBAH 0x00
+#define DCRO_PEGPL_CFGBAL 0x01
+#define DCRO_PEGPL_CFGMSK 0x02
+#define DCRO_PEGPL_MSGBAH 0x03
+#define DCRO_PEGPL_MSGBAL 0x04
+#define DCRO_PEGPL_MSGMSK 0x05
+#define DCRO_PEGPL_OMR1BAH 0x06
+#define DCRO_PEGPL_OMR1BAL 0x07
+#define DCRO_PEGPL_OMR1MSKH 0x08
+#define DCRO_PEGPL_OMR1MSKL 0x09
+#define DCRO_PEGPL_OMR2BAH 0x0a
+#define DCRO_PEGPL_OMR2BAL 0x0b
+#define DCRO_PEGPL_OMR2MSKH 0x0c
+#define DCRO_PEGPL_OMR2MSKL 0x0d
+#define DCRO_PEGPL_OMR3BAH 0x0e
+#define DCRO_PEGPL_OMR3BAL 0x0f
+#define DCRO_PEGPL_OMR3MSKH 0x10
+#define DCRO_PEGPL_OMR3MSKL 0x11
+#define DCRO_PEGPL_REGBAH 0x12
+#define DCRO_PEGPL_REGBAL 0x13
+#define DCRO_PEGPL_REGMSK 0x14
+#define DCRO_PEGPL_SPECIAL 0x15
+#define DCRO_PEGPL_CFG 0x16
+#define DCRO_PEGPL_ESR 0x17
+#define DCRO_PEGPL_EARH 0x18
+#define DCRO_PEGPL_EARL 0x19
+#define DCRO_PEGPL_EATR 0x1a
+
+/* DMER mask */
+#define GPL_DMER_MASK_DISA 0x02000000
+
+/*
+ * System DCRs (SDRs)
+ */
+#define PESDR0_PLLLCT1 0x03a0
+#define PESDR0_PLLLCT2 0x03a1
+#define PESDR0_PLLLCT3 0x03a2
+
+/*
+ * 440SPe additional DCRs
+ */
+#define PESDR0_440SPE_UTLSET1 0x0300
+#define PESDR0_440SPE_UTLSET2 0x0301
+#define PESDR0_440SPE_DLPSET 0x0302
+#define PESDR0_440SPE_LOOP 0x0303
+#define PESDR0_440SPE_RCSSET 0x0304
+#define PESDR0_440SPE_RCSSTS 0x0305
+#define PESDR0_440SPE_HSSL0SET1 0x0306
+#define PESDR0_440SPE_HSSL0SET2 0x0307
+#define PESDR0_440SPE_HSSL0STS 0x0308
+#define PESDR0_440SPE_HSSL1SET1 0x0309
+#define PESDR0_440SPE_HSSL1SET2 0x030a
+#define PESDR0_440SPE_HSSL1STS 0x030b
+#define PESDR0_440SPE_HSSL2SET1 0x030c
+#define PESDR0_440SPE_HSSL2SET2 0x030d
+#define PESDR0_440SPE_HSSL2STS 0x030e
+#define PESDR0_440SPE_HSSL3SET1 0x030f
+#define PESDR0_440SPE_HSSL3SET2 0x0310
+#define PESDR0_440SPE_HSSL3STS 0x0311
+#define PESDR0_440SPE_HSSL4SET1 0x0312
+#define PESDR0_440SPE_HSSL4SET2 0x0313
+#define PESDR0_440SPE_HSSL4STS 0x0314
+#define PESDR0_440SPE_HSSL5SET1 0x0315
+#define PESDR0_440SPE_HSSL5SET2 0x0316
+#define PESDR0_440SPE_HSSL5STS 0x0317
+#define PESDR0_440SPE_HSSL6SET1 0x0318
+#define PESDR0_440SPE_HSSL6SET2 0x0319
+#define PESDR0_440SPE_HSSL6STS 0x031a
+#define PESDR0_440SPE_HSSL7SET1 0x031b
+#define PESDR0_440SPE_HSSL7SET2 0x031c
+#define PESDR0_440SPE_HSSL7STS 0x031d
+#define PESDR0_440SPE_HSSCTLSET 0x031e
+#define PESDR0_440SPE_LANE_ABCD 0x031f
+#define PESDR0_440SPE_LANE_EFGH 0x0320
+
+#define PESDR1_440SPE_UTLSET1 0x0340
+#define PESDR1_440SPE_UTLSET2 0x0341
+#define PESDR1_440SPE_DLPSET 0x0342
+#define PESDR1_440SPE_LOOP 0x0343
+#define PESDR1_440SPE_RCSSET 0x0344
+#define PESDR1_440SPE_RCSSTS 0x0345
+#define PESDR1_440SPE_HSSL0SET1 0x0346
+#define PESDR1_440SPE_HSSL0SET2 0x0347
+#define PESDR1_440SPE_HSSL0STS 0x0348
+#define PESDR1_440SPE_HSSL1SET1 0x0349
+#define PESDR1_440SPE_HSSL1SET2 0x034a
+#define PESDR1_440SPE_HSSL1STS 0x034b
+#define PESDR1_440SPE_HSSL2SET1 0x034c
+#define PESDR1_440SPE_HSSL2SET2 0x034d
+#define PESDR1_440SPE_HSSL2STS 0x034e
+#define PESDR1_440SPE_HSSL3SET1 0x034f
+#define PESDR1_440SPE_HSSL3SET2 0x0350
+#define PESDR1_440SPE_HSSL3STS 0x0351
+#define PESDR1_440SPE_HSSCTLSET 0x0352
+#define PESDR1_440SPE_LANE_ABCD 0x0353
+
+#define PESDR2_440SPE_UTLSET1 0x0370
+#define PESDR2_440SPE_UTLSET2 0x0371
+#define PESDR2_440SPE_DLPSET 0x0372
+#define PESDR2_440SPE_LOOP 0x0373
+#define PESDR2_440SPE_RCSSET 0x0374
+#define PESDR2_440SPE_RCSSTS 0x0375
+#define PESDR2_440SPE_HSSL0SET1 0x0376
+#define PESDR2_440SPE_HSSL0SET2 0x0377
+#define PESDR2_440SPE_HSSL0STS 0x0378
+#define PESDR2_440SPE_HSSL1SET1 0x0379
+#define PESDR2_440SPE_HSSL1SET2 0x037a
+#define PESDR2_440SPE_HSSL1STS 0x037b
+#define PESDR2_440SPE_HSSL2SET1 0x037c
+#define PESDR2_440SPE_HSSL2SET2 0x037d
+#define PESDR2_440SPE_HSSL2STS 0x037e
+#define PESDR2_440SPE_HSSL3SET1 0x037f
+#define PESDR2_440SPE_HSSL3SET2 0x0380
+#define PESDR2_440SPE_HSSL3STS 0x0381
+#define PESDR2_440SPE_HSSCTLSET 0x0382
+#define PESDR2_440SPE_LANE_ABCD 0x0383
+
+/*
+ * 405EX additional DCRs
+ */
+#define PESDR0_405EX_UTLSET1 0x0400
+#define PESDR0_405EX_UTLSET2 0x0401
+#define PESDR0_405EX_DLPSET 0x0402
+#define PESDR0_405EX_LOOP 0x0403
+#define PESDR0_405EX_RCSSET 0x0404
+#define PESDR0_405EX_RCSSTS 0x0405
+#define PESDR0_405EX_PHYSET1 0x0406
+#define PESDR0_405EX_PHYSET2 0x0407
+#define PESDR0_405EX_BIST 0x0408
+#define PESDR0_405EX_LPB 0x040B
+#define PESDR0_405EX_PHYSTA 0x040C
+
+#define PESDR1_405EX_UTLSET1 0x0440
+#define PESDR1_405EX_UTLSET2 0x0441
+#define PESDR1_405EX_DLPSET 0x0442
+#define PESDR1_405EX_LOOP 0x0443
+#define PESDR1_405EX_RCSSET 0x0444
+#define PESDR1_405EX_RCSSTS 0x0445
+#define PESDR1_405EX_PHYSET1 0x0446
+#define PESDR1_405EX_PHYSET2 0x0447
+#define PESDR1_405EX_BIST 0x0448
+#define PESDR1_405EX_LPB 0x044B
+#define PESDR1_405EX_PHYSTA 0x044C
+
+/*
+ * Of the above, some are common offsets from the base
+ */
+#define PESDRn_UTLSET1 0x00
+#define PESDRn_UTLSET2 0x01
+#define PESDRn_DLPSET 0x02
+#define PESDRn_LOOP 0x03
+#define PESDRn_RCSSET 0x04
+#define PESDRn_RCSSTS 0x05
+
+/* 440spe only */
+#define PESDRn_440SPE_HSSL0SET1 0x06
+#define PESDRn_440SPE_HSSL0SET2 0x07
+#define PESDRn_440SPE_HSSL0STS 0x08
+#define PESDRn_440SPE_HSSL1SET1 0x09
+#define PESDRn_440SPE_HSSL1SET2 0x0a
+#define PESDRn_440SPE_HSSL1STS 0x0b
+#define PESDRn_440SPE_HSSL2SET1 0x0c
+#define PESDRn_440SPE_HSSL2SET2 0x0d
+#define PESDRn_440SPE_HSSL2STS 0x0e
+#define PESDRn_440SPE_HSSL3SET1 0x0f
+#define PESDRn_440SPE_HSSL3SET2 0x10
+#define PESDRn_440SPE_HSSL3STS 0x11
+
+/* 440spe port 0 only */
+#define PESDRn_440SPE_HSSL4SET1 0x12
+#define PESDRn_440SPE_HSSL4SET2 0x13
+#define PESDRn_440SPE_HSSL4STS 0x14
+#define PESDRn_440SPE_HSSL5SET1 0x15
+#define PESDRn_440SPE_HSSL5SET2 0x16
+#define PESDRn_440SPE_HSSL5STS 0x17
+#define PESDRn_440SPE_HSSL6SET1 0x18
+#define PESDRn_440SPE_HSSL6SET2 0x19
+#define PESDRn_440SPE_HSSL6STS 0x1a
+#define PESDRn_440SPE_HSSL7SET1 0x1b
+#define PESDRn_440SPE_HSSL7SET2 0x1c
+#define PESDRn_440SPE_HSSL7STS 0x1d
+
+/* 405ex only */
+#define PESDRn_405EX_PHYSET1 0x06
+#define PESDRn_405EX_PHYSET2 0x07
+#define PESDRn_405EX_PHYSTA 0x0c
+
+/*
+ * UTL register offsets
+ */
+#define PEUTL_PBCTL 0x00
+#define PEUTL_PBBSZ 0x20
+#define PEUTL_OPDBSZ 0x68
+#define PEUTL_IPHBSZ 0x70
+#define PEUTL_IPDBSZ 0x78
+#define PEUTL_OUTTR 0x90
+#define PEUTL_INTR 0x98
+#define PEUTL_PCTL 0xa0
+#define PEUTL_RCSTA 0xB0
+#define PEUTL_RCIRQEN 0xb8
+
+/*
+ * Config space register offsets
+ */
+#define PECFG_BAR0LMPA 0x210
+#define PECFG_BAR0HMPA 0x214
+#define PECFG_BAR1MPA 0x218
+#define PECFG_BAR2LMPA 0x220
+#define PECFG_BAR2HMPA 0x224
+
+#define PECFG_PIMEN 0x33c
+#define PECFG_PIM0LAL 0x340
+#define PECFG_PIM0LAH 0x344
+#define PECFG_PIM1LAL 0x348
+#define PECFG_PIM1LAH 0x34c
+#define PECFG_PIM01SAL 0x350
+#define PECFG_PIM01SAH 0x354
+
+#define PECFG_POM0LAL 0x380
+#define PECFG_POM0LAH 0x384
+#define PECFG_POM1LAL 0x388
+#define PECFG_POM1LAH 0x38c
+#define PECFG_POM2LAL 0x390
+#define PECFG_POM2LAH 0x394
+
+
+enum
+{
+ PTYPE_ENDPOINT = 0x0,
+ PTYPE_LEGACY_ENDPOINT = 0x1,
+ PTYPE_ROOT_PORT = 0x4,
+
+ LNKW_X1 = 0x1,
+ LNKW_X4 = 0x4,
+ LNKW_X8 = 0x8
+};
+
#endif /* __PPC4XX_PCI_H__ */
Index: linux-merge/arch/powerpc/Kconfig
===================================================================
--- linux-merge.orig/arch/powerpc/Kconfig 2007-12-14 15:48:56.000000000 +1100
+++ linux-merge/arch/powerpc/Kconfig 2007-12-14 15:49:43.000000000 +1100
@@ -165,6 +165,7 @@ config PPC_OF_PLATFORM_PCI
source "init/Kconfig"
+source "arch/powerpc/sysdev/Kconfig"
source "arch/powerpc/platforms/Kconfig"
menu "Kernel options"
Index: linux-merge/arch/powerpc/sysdev/Kconfig
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-merge/arch/powerpc/sysdev/Kconfig 2007-12-14 15:49:43.000000000 +1100
@@ -0,0 +1,8 @@
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+config PPC4xx_PCI_EXPRESS
+ bool
+ depends on PCI && 4xx
+ default n
More information about the Linuxppc-dev
mailing list