[PATCH 1/4] sbc8560: add basic support for Wind River SBC8560 as powerpc
Paul Gortmaker
paul.gortmaker at windriver.com
Fri Dec 21 01:54:29 EST 2007
This adds the basic support for the Wind River SBC8560 board, implemented
as powerpc. It closely follows the implementation of the MPC8560ADS.
Signed-off-by: Paul Gortmaker <paul.gortmaker at windriver.com>
---
arch/powerpc/platforms/85xx/Kconfig | 11 +-
arch/powerpc/platforms/85xx/Makefile | 1 +
arch/powerpc/platforms/85xx/sbc8560.c | 302 +++++++++++++++++++++++++++++++++
3 files changed, 312 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 7748a3a..0eb497b 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -38,6 +38,13 @@ config MPC85xx_DS
help
This option enables support for the MPC85xx DS (MPC8544 DS) board
+config SBC8560
+ bool "Wind River SBC8560"
+ select DEFAULT_UIMAGE
+ select PPC_CPM_NEW_BINDING
+ help
+ This option enables support for the Wind River SBC8560 board
+
endchoice
config MPC8540
@@ -49,7 +56,7 @@ config MPC8540
config MPC8560
bool
select CPM2
- default y if MPC8560_ADS
+ default y if MPC8560_ADS || SBC8560
config MPC85xx
bool
@@ -59,4 +66,4 @@ config MPC85xx
select FSL_PCI if PCI
select SERIAL_8250_SHARE_IRQ if SERIAL_8250
default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS \
- || MPC85xx_MDS || MPC85xx_DS
+ || MPC85xx_MDS || MPC85xx_DS || SBC8560
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 5eca920..c3f4d01 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
obj-$(CONFIG_MPC85xx_DS) += mpc85xx_ds.o
obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
+obj-$(CONFIG_SBC8560) += sbc8560.o
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
new file mode 100644
index 0000000..6aef38b
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/sbc8560.c
@@ -0,0 +1,302 @@
+/*
+ * Wind River SBC8560 setup and early boot code.
+ *
+ * Copyright 2007 Wind River Systems Inc.
+ *
+ * By Paul Gortmaker (see MAINTAINERS for contact information)
+ *
+ * Based largely on the MPC8560ADS support - Copyright 2005 Freescale Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpic.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#ifdef CONFIG_CPM2
+#include <asm/cpm2.h>
+#include <sysdev/cpm2_pic.h>
+#endif
+
+#ifdef CONFIG_PCI
+static int sbc8560_exclude_device(struct pci_controller *hose,
+ u_char bus, u_char devfn)
+{
+ if (bus == 0 && PCI_SLOT(devfn) == 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ else
+ return PCIBIOS_SUCCESSFUL;
+}
+#endif /* CONFIG_PCI */
+
+#ifdef CONFIG_CPM2
+
+static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
+{
+ int cascade_irq;
+
+ while ((cascade_irq = cpm2_get_irq()) >= 0) {
+ generic_handle_irq(cascade_irq);
+ }
+ desc->chip->eoi(irq);
+}
+
+#endif /* CONFIG_CPM2 */
+
+static void __init sbc8560_pic_init(void)
+{
+ struct mpic *mpic;
+ struct resource r;
+ struct device_node *np = NULL;
+#ifdef CONFIG_CPM2
+ int irq;
+#endif
+
+ np = of_find_node_by_type(np, "open-pic");
+
+ if (np == NULL) {
+ printk(KERN_ERR "Could not find open-pic node\n");
+ return;
+ }
+
+ if(of_address_to_resource(np, 0, &r)) {
+ printk(KERN_ERR "Could not map mpic register space\n");
+ of_node_put(np);
+ return;
+ }
+
+ mpic = mpic_alloc(np, r.start,
+ MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ 0, 256, " OpenPIC ");
+ BUG_ON(mpic == NULL);
+ of_node_put(np);
+
+ mpic_init(mpic);
+
+#ifdef CONFIG_CPM2
+ /* Setup CPM2 PIC */
+ np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
+ if (np == NULL) {
+ printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
+ return;
+ }
+ irq = irq_of_parse_and_map(np, 0);
+
+ cpm2_pic_init(np);
+ set_irq_chained_handler(irq, cpm2_cascade);
+#endif
+}
+
+/*
+ * Setup the architecture
+ */
+#ifdef CONFIG_CPM2
+struct cpm_pin {
+ int port, pin, flags;
+};
+
+static struct cpm_pin sbc8560_pins[] = {
+ /* SCC1 */
+ {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+ /* SCC2 */
+ {3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+ /* FCC2 */
+ {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK14 */
+ {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK13 */
+
+ /* FCC3 */
+ {1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 7, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {2, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK16 */
+ {2, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK15 */
+};
+
+static void __init init_ioports(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(sbc8560_pins); i++) {
+ struct cpm_pin *pin = &sbc8560_pins[i];
+ cpm2_set_pin(pin->port, pin->pin, pin->flags);
+ }
+
+ cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
+ cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
+ cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
+ cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
+ cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
+ cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
+ cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX);
+ cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX);
+}
+#endif
+
+static void __init sbc8560_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+ struct device_node *np;
+#endif
+
+ if (ppc_md.progress)
+ ppc_md.progress("sbc8560_setup_arch()", 0);
+
+#ifdef CONFIG_CPM2
+ cpm2_reset();
+ init_ioports();
+#endif
+
+#ifdef CONFIG_PCI
+ for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
+ fsl_add_bridge(np, 1);
+
+ ppc_md.pci_exclude_device = sbc8560_exclude_device;
+#endif
+}
+
+static void sbc8560_show_cpuinfo(struct seq_file *m)
+{
+ uint pvid, svid, phid1;
+ uint memsize = total_memory;
+
+ pvid = mfspr(SPRN_PVR);
+ svid = mfspr(SPRN_SVR);
+
+ seq_printf(m, "Vendor\t\t: Wind River\n");
+ seq_printf(m, "Machine\t\t: SBC8560\n");
+ seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
+ seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+ /* Display cpu Pll setting */
+ phid1 = mfspr(SPRN_HID1);
+ seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
+
+ /* Display the amount of memory */
+ seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+}
+
+static struct of_device_id __initdata of_bus_ids[] = {
+ { .name = "soc", },
+ { .type = "soc", },
+ { .name = "cpm", },
+ { .name = "localbus", },
+ {},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+ if (!machine_is(sbc8560))
+ return 0;
+
+ of_platform_bus_probe(NULL, of_bus_ids, NULL);
+ return 0;
+}
+device_initcall(declare_of_platform_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init sbc8560_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "SBC8560");
+}
+
+#ifdef CONFIG_RTC_DRV_M48T59
+static int __init sbc8560_rtc_init(void)
+{
+ struct device_node *np;
+ struct resource res;
+ struct platform_device *rtc_dev;
+
+ np = of_find_node_by_type(NULL, "rtc");
+ if (np == NULL) {
+ printk("No RTC in DTB. Has it been eaten by wild dogs?\n");
+ return -ENODEV;
+ }
+
+ if (!of_device_is_compatible(np, "m48t59")) {
+ printk("Ignoring non-m48t59 compatible RTC\n");
+ of_node_put(np);
+ return -ENODEV;
+ }
+
+ of_address_to_resource(np, 0, &res);
+
+ printk("Found RTC (m48t59) at i/o 0x%x\n", res.start);
+
+ rtc_dev = platform_device_register_simple("rtc-m48t59", 0, &res, 1);
+
+ if (IS_ERR(rtc_dev))
+ return PTR_ERR(rtc_dev);
+
+ of_node_put(np);
+ return 0;
+}
+
+arch_initcall(sbc8560_rtc_init);
+
+#endif /* M48T59 */
+
+define_machine(sbc8560) {
+ .name = "SBC8560",
+ .probe = sbc8560_probe,
+ .setup_arch = sbc8560_setup_arch,
+ .init_IRQ = sbc8560_pic_init,
+ .show_cpuinfo = sbc8560_show_cpuinfo,
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
--
1.5.0.rc1.gf4b6c
More information about the Linuxppc-dev
mailing list