September 2019 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sun Sep 1 01:01:22 AEST 2019
Ending: Mon Sep 30 23:37:26 AEST 2019
Messages: 674

• [phosphor-pid-control] scaling issue   Hank Liou (劉晉翰)
• [phosphor-pid-control] scaling issue   Hank Liou (劉晉翰)
• [phosphor-pid-control] scaling issue   Hank Liou (劉晉翰)
• [phosphor-pid-control] scaling issue   Hank Liou (劉晉翰)
• Package dbus-sensors build fail   Duke Du (杜祥嘉)
• Package dbus-sensors build fail   Duke Du (杜祥嘉)
• Package dbus-sensors build fail   Duke Du (杜祥嘉)
• About phosphor-ipmi-host question   Will Liang (梁永鉉)
• Questions of openbmc-test-automation   Will Liang (梁永鉉)
• Questions of openbmc-test-automation   Will Liang (梁永鉉)
• Change the password through the REST interface   Xiaochao Ma (马小超)
• Expiring Passwords and CA law   Jandra A
• how to do large-ish IPC transfers   Alexander Amelkin
• how to do large-ish IPC transfers   Alexander Amelkin
• RMCP support   Alexander Amelkin
• RMCP support   Alexander Amelkin
• Enable KCS interface in zaius   Zheng Bao
• Enable KCS interface in zaius   Zheng Bao
• Enable KCS interface in zaius   Zheng Bao
• How to use apt get vim in CROPS   Zheng Bao
• [AST2500]The eth0 interface can not work   Zheng Bao
• [AST2500]The eth0 interface can not work   Zheng Bao
• Fan PWM monitoring and control   Matthew Barth
• Fan PWM monitoring and control   Matthew Barth
• Fan PWM monitoring and control   Matthew Barth
• Fan PWM monitoring and control   Matthew Barth
• Fan PWM monitoring and control   Matthew Barth
• Fan PWM monitoring and control   Matthew Barth
• Unable to boot OpenBMC image in QEMU for AST2500   Stephen Beckwith
• Unable to boot OpenBMC image in QEMU for AST2500   Stephen Beckwith
• Unable to boot OpenBMC image in QEMU for AST2500   Stephen Beckwith
• Question for ACPI status   Bills, Jason M
• IPMI SEL Event ID   Bills, Jason M
• phosphor-pid-control build failure with yocto head   Brad Bishop
• [yocto] Build break in the latest openbmc tree.   Brad Bishop
• [PATCH] ncsi-netlink: support sending NC-SI commands over Netlink interface   Brad Bishop
• IBM migrating to entity-manager   Brad Bishop
• Persistent storage of AssetTag   Brad Bishop
• QEMU native compile issue   Brad Bishop
• witherspoon-pfault-analysis repository rename to phosphor-power   Brad Bishop
• using nft meters to protect from denial of service attacks   Brad Bishop
• how to do large-ish IPC transfers   Brad Bishop
• QEMU native compile issue   Brad Bishop
• how to do large-ish IPC transfers   Brad Bishop
• how to do large-ish IPC transfers   Brad Bishop
• Rant regarding code review issues   Brad Bishop
• [PATCH linux dev-5.3 0/3] ARM: dts: aspeed-g6 lpc, rainier   Brad Bishop
• [PATCH linux dev-5.3 1/3] ARM: aspeed-g6: lpc: add compatible strings   Brad Bishop
• [PATCH linux dev-5.3 2/3] ARM: dts: aspeed-g6: Add lpc devices   Brad Bishop
• [PATCH linux dev-5.3 3/3] ARM: dts: aspeed: add Rainier system   Brad Bishop
• OpenBMC CVE issues in openssl   Brad Bishop
• Feedback on documentation philosophy requested   Brad Bishop
• Some Recipes Randomly Fail   Brad Bishop
• src-uri-bad in flashd and chassisd recipes   Brad Bishop
• src-uri-bad in flashd and chassisd recipes   Brad Bishop
• [PATCH v2 linux dev-5.3 0/5] ARM: dts: aspeed-g6 lpc, rainier   Brad Bishop
• [PATCH v2 linux dev-5.3 1/4] dt-bindings: lpc: add aspeed-g6 compatible strings   Brad Bishop
• [PATCH v2 linux dev-5.3 2/4] ARM: aspeed-g6: lpc: add compatible strings   Brad Bishop
• [PATCH v2 linux dev-5.3 3/4] ARM: dts: aspeed-g6: Add lpc devices   Brad Bishop
• [PATCH v2 linux dev-5.3 4/4] ARM: dts: aspeed: add Rainier system   Brad Bishop
• [PATCH v2 linux dev-5.3 0/5] ARM: dts: aspeed-g6 lpc, rainier   Brad Bishop
• [PATCH v2 linux dev-5.3 1/4] dt-bindings: lpc: add aspeed-g6 compatible strings   Brad Bishop
• [PATCH v2 linux dev-5.3 2/4] ARM: aspeed-g6: lpc: add compatible strings   Brad Bishop
• [PATCH v2 linux dev-5.3 3/4] ARM: dts: aspeed-g6: Add lpc devices   Brad Bishop
• [PATCH v2 linux dev-5.3 4/4] ARM: dts: aspeed: add Rainier system   Brad Bishop
• [PATCH v2 linux dev-5.3 0/5] ARM: dts: aspeed-g6 lpc, rainier   Brad Bishop
• add zeus to layer compatibility   Brad Bishop
• OpenBMC CVE issues in openssl   Brad Bishop
• OpenBMC CVE issues in openssl   Brad Bishop
• [PATCH v3 linux dev-5.3 00/10] ARM: dts: aspeed-g6 lpc, rainier   Brad Bishop
• [PATCH v3 linux dev-5.3 01/10] dt-bindings: aspeed-lpc: Add G6 compatible strings   Brad Bishop
• [PATCH v3 linux dev-5.3 02/10] dt-bindings: ipmi: Add aspeed-g6 compatible strings   Brad Bishop
• [PATCH v3 linux dev-5.3 03/10] soc: aspeed: lpc: Add G6 compatible strings   Brad Bishop
• [PATCH v3 linux dev-5.3 04/10] ipmi: aspeed-g6: Add compatible strings   Brad Bishop
• [PATCH v3 linux dev-5.3 05/10] reset: simple: Add AST2600 compatibility string   Brad Bishop
• [PATCH v3 linux dev-5.3 06/10] ARM: dts: aspeed-g6: Add lpc devices   Brad Bishop
• [PATCH v3 linux dev-5.3 07/10] ARM: dts: aspeed: Add Rainier system   Brad Bishop
• [PATCH v3 linux dev-5.3 08/10] ARM: dts: aspeed-g6: Expose SuperIO scratch registers   Brad Bishop
• [PATCH v3 linux dev-5.3 09/10] ARM: dts: aspeed: rainier: Add mac devices   Brad Bishop
• [PATCH v3 linux dev-5.3 10/10] ARM: dts: aspeed: rainier: Add i2c devices   Brad Bishop
• [PATCH v2 linux dev-5.3 1/4] dt-bindings: lpc: add aspeed-g6 compatible strings   Brad Bishop
• [PATCH v2 linux dev-5.3 2/4] ARM: aspeed-g6: lpc: add compatible strings   Brad Bishop
• [PATCH v2 linux dev-5.3 3/4] ARM: dts: aspeed-g6: Add lpc devices   Brad Bishop
• [PATCH v2 linux dev-5.3 4/4] ARM: dts: aspeed: add Rainier system   Brad Bishop
• [PATCH v4 linux dev-5.3 00/10] ARM: dts: aspeed-g6 lpc, rainier   Brad Bishop
• [PATCH v4 linuux dev-5.3 01/10] dt-bindings: aspeed-lpc: Add G6 compatible strings   Brad Bishop
• [PATCH v4 linuux dev-5.3 02/10] dt-bindings: ipmi: Add aspeed-g6 compatible strings   Brad Bishop
• [PATCH v4 linuux dev-5.3 03/10] soc: aspeed: lpc: Add G6 compatible strings   Brad Bishop
• [PATCH v4 linuux dev-5.3 04/10] ipmi: aspeed-g6: Add compatible strings   Brad Bishop
• [PATCH v4 linuux dev-5.3 05/10] reset: simple: Add AST2600 compatibility string   Brad Bishop
• [PATCH v4 linuux dev-5.3 06/10] ARM: dts: aspeed-g6: Add lpc devices   Brad Bishop
• [PATCH v4 linuux dev-5.3 07/10] ARM: dts: aspeed: Add Rainier system   Brad Bishop
• [PATCH v4 linuux dev-5.3 08/10] ARM: dts: aspeed-g6: Expose SuperIO scratch registers   Brad Bishop
• [PATCH v4 linuux dev-5.3 09/10] ARM: dts: aspeed: rainier: Add mac devices   Brad Bishop
• [PATCH v4 linuux dev-5.3 10/10] ARM: dts: aspeed: rainier: Add i2c devices   Brad Bishop
• [PATCH linux dev-5.3 0/2] ARM: dts: aspeed: tacoma partitions   Brad Bishop
• [PATCH linux dev-5.3 1/2] ARM: dts: Add 128MiB OpenBMC flash layout   Brad Bishop
• [PATCH linux dev-5.3 2/2] ARM: dts: aspeed: tacoma: Add fmc and partitions   Brad Bishop
• i2c-dev wrapper   Brad Bishop
• Proposal to merge code into openbmc 2.7 warrior branch   Brad Bishop
• witherspoon-pfault-analysis repository rename to phosphor-power   Brad Bishop
• witherspoon-pfault-analysis repository rename to phosphor-power   Brad Bishop
• i2c-dev wrapper   Brad Bishop
• Applied "spi: npcm-fiu: fix spelling mistake "frequancy" -> "frequency"" to the spi tree   Mark Brown
• Applied "spi: npcm-fiu: remove set but not used variable 'retlen'" to the spi tree   Mark Brown
• Port 80H Snoop   CS20 CHLi30
• Port 80H Snoop   CS20 CHLi30
• phosphor-ipmi-flash: A problem in BMC FW update over LPC   CS20 CTCchien
• 回收: phosphor-ipmi-flash: A problem in BMC FW update over LPC   CS20 CTCchien
• phosphor-ipmi-flash: A problem in BMC FW update over LPC   CS20 CTCchien
• [PATCH linux dev-5.2 v2 3/4] ARM: dts: Aspeed: ast2600: Add I2C busses   Ryan Chen
• phosphor-isolation   Ryan Chen
• Redfish workshop in France 10/31   Bruno Cornec
• [PATCH net-next] net/ncsi: support unaligned payload size in NC-SI cmd handler   Justin.Lee1 at Dell.com
• [PATCH] ARM: dts: aspeed: fp5280g2: Add led configure   Chicago Duan
• Proposal for 2 properties for Nameservers   Manojkiran Eda
• [PATCH] ftgmac100: Disable HW checksum generation on AST2500   Florian Fainelli
• [PATCH] ftgmac100: Disable HW checksum generation on AST2500   Florian Fainelli
• phosphor-pid-control build failure with yocto head   Benjamin Fair
• SSD/NVMe Temperature Sensors   Benjamin Fair
• phosphor-pid-control build failure with yocto head   James Feist
• Question of pid-contorl on stepwise configuration   James Feist
• GPIO state in qemu   James Feist
• [phosphor-pid-control] scaling issue   James Feist
• Package dbus-sensors build fail   James Feist
• Package dbus-sensors build fail   James Feist
• Need Help with IPMBBridgeD   James Feist
• phosphor-isolation   James Feist
• phosphor-isolation   James Feist
• phosphor-isolation   James Feist
• MACHINE=s2600wf bitbake obmc-phosphor-image at HEAD fails   James Feist
• [External] Re: Question for upstream   James Feist
• [yocto] Build break in the latest openbmc tree.   Alistair Francis
• How to handle a specific platform application?   Andrew Geissler
• stack overflow tag for openbmc questions?   Andrew Geissler
• OpenBMC Validation and CI   Andrew Geissler
• capability to stop all bmc recovery   Andrew Geissler
• running unit test CI framework on a mac   Andrew Geissler
• BitBake Apache License and Packaging for OpenBMC Components   Andrew Geissler
• systemd target monitoring enable   Andrew Geissler
• Expired Password Service   Andrew Geissler
• Information on Boxelder   Joe Gialluca
• GPIO state in qemu   Cédric Le Goater
• GPIO state in qemu   Cédric Le Goater
• [PATCH linux dev-5.2 v2 3/4] ARM: dts: Aspeed: ast2600: Add I2C busses   Cédric Le Goater
• [PATCH linux dev-5.2 v2 3/4] ARM: dts: Aspeed: ast2600: Add I2C busses   Cédric Le Goater
• [PATCH linux dev-5.2 v2 3/4] ARM: dts: Aspeed: ast2600: Add I2C busses   Cédric Le Goater
• [PATCH linux dev-5.3 5/6] net: ftgmac100: Ungate RCLK for RMII on AST2600   Cédric Le Goater
• [PATCH linux dev-5.3 00/13] mtd: spi-nor: aspeed: add support for ast2600   Cédric Le Goater
• [PATCH linux dev-5.3 01/13] ARM: dts: aspeed-g6: Add FMC and SPI devices   Cédric Le Goater
• [PATCH linux dev-5.3 02/13] ARM: dts: aspeed: rainier: Enable FMC and SPI devices   Cédric Le Goater
• [PATCH linux dev-5.3 03/13] ARM: dts: aspeed: rainier: Enable MAC0   Cédric Le Goater
• [PATCH linux dev-5.3 04/13] ARM: dts: ast2600-evb: Enable FMC and SPI devices   Cédric Le Goater
• [PATCH linux dev-5.3 05/13] mtd: spi-nor: Add support for w25q512jv   Cédric Le Goater
• [PATCH linux dev-5.3 06/13] mtd: spi-nor: aspeed: Introduce a field for the AHB physical address   Cédric Le Goater
• [PATCH linux dev-5.3 07/13] mtd: spi-nor: aspeed: Introduce segment operations   Cédric Le Goater
• [PATCH linux dev-5.3 08/13] mtd: spi-nor: aspeed: add initial support for ast2600   Cédric Le Goater
• [PATCH linux dev-5.3 09/13] mtd: spi-nor: aspeed: Check for disabled segments on the AST2600   Cédric Le Goater
• [PATCH linux dev-5.3 10/13] mtd: spi-nor: aspeed: Introduce training operations per platform   Cédric Le Goater
• [PATCH linux dev-5.3 11/13] mtd: spi-nor: aspeed: Introduce a HCLK mask for training   Cédric Le Goater
• [PATCH linux dev-5.3 12/13] mtd: spi-nor: aspeed: check upper freq limit when doing training   Cédric Le Goater
• [PATCH linux dev-5.3 13/13] mtd: spi-nor: aspeed: add support for AST2600 training   Cédric Le Goater
• [PATCH linux dev-5.3 03/13] ARM: dts: aspeed: rainier: Enable MAC0   Cédric Le Goater
• [PATCH linux dev-5.3 1/2] ARM: dts: Add 128MiB OpenBMC flash layout   Cédric Le Goater
• [PATCH linux dev-5.3 2/2] ARM: dts: aspeed: ast2600evb: Use custom flash layout   Cédric Le Goater
• [PATCH linux dev-5.3 13/13] mtd: spi-nor: aspeed: add support for AST2600 training   Cédric Le Goater
• [PATCH linux dev-5.3] ARM: dts: aspeed: tacoma: Disable CS1 as it is broken   Cédric Le Goater
• [PATCH 0/3] mtd: spi-nor: aspeed: fix support for multiple CS on the ast2600   Cédric Le Goater
• [PATCH 1/3] mtd: spi-nor: aspeed: fix training of multiple CS on the AST2600   Cédric Le Goater
• [PATCH 2/3] mtd: spi-nor: aspeed: Disable zero size segments on the AST2600   Cédric Le Goater
• [PATCH 3/3] ARM: dts: aspeed: tacoma: Re-enable CS1   Cédric Le Goater
• GPIO state in qemu   Rashmica Gupta
• Change the password through the REST interface   Ratan Gupta
• [PATCH v2 1/4] mmc: sdhci-of-aspeed: Fix link failure for SPARC   Ulf Hansson
• [PATCH v2 0/4] mmc: sdhci-of-aspeed: Fixes for AST2600 eMMC support   Ulf Hansson
• [PATCH v3] mmc: sdhci-of-aspeed: Depend on CONFIG_OF_ADDRESS   Ulf Hansson
• [PATCH v3 2/3] dt-bindings: serial: 8250: Add aspeed,sirq-polarity-sense.   Rob Herring
• [PATCH v3 1/2] dt-binding: hwrng: add NPCM RNG documentation   Rob Herring
• [PATCH dev-5.2 0/2] i2c: aspeed: Add H/W timeout support   Brendan Higgins
• [PATCH v2 2/2] hwrng: npcm: add NPCM RNG driver   Milton Miller II
• how to use spi flash BIOS/Host firmware??   Milton Miller II
• phosphor-isolation   Milton Miller II
• phosphor-isolation   Milton Miller II
• [PATCH v3 linux dev-5.3 01/10] dt-bindings: aspeed-lpc: Add G6 compatible strings   Milton Miller II
• Cannot connect to console server in s2600wf   AKASH G J
• Cannot connect to console server in s2600wf   AKASH G J
• Cannot connect to console server in s2600wf   AKASH G J
• Sensors not showing in ipmitool commands [S2600WF]   AKASH G J
• CurrentBMCState: BMCState.NotReady   AKASH G J
• CurrentBMCState: BMCState.NotReady   AKASH G J
• [PATCH] i2c: busses: i2c-fsi.c: Add of_put_node() before break   Eddie James
• [PATCH linux dev-5.2 1/2] ARM: dts: Aspeed: Add I2C busses to AST2600 and Tacoma   Eddie James
• [PATCH linux dev-5.2 2/2] i2c: Aspeed: Add AST2600 compatible   Eddie James
• [PATCH linux dev-5.2 2/2] i2c: Aspeed: Add AST2600 compatible   Eddie James
• [PATCH linux dev-5.2 v2 0/4] Aspeed: I2C: Add support for AST2600   Eddie James
• [PATCH linux dev-5.2 v2 1/4] i2c: Aspeed: Add AST2600 compatible   Eddie James
• [PATCH linux dev-5.2 v2 2/4] i2c: Aspeed: Avoid invalid resource warning for byte mode   Eddie James
• [PATCH linux dev-5.2 v2 3/4] ARM: dts: Aspeed: ast2600: Add I2C busses   Eddie James
• [PATCH linux dev-5.2 v2 4/4] ARM: dts: Aspeed: Tacoma: Enable I2C busses   Eddie James
• [PATCH linux dev-5.2] dt-bindings: i2c: Aspeed: Add AST2600 compatible   Eddie James
• [PATCH linux dev-5.2 v2 3/4] ARM: dts: Aspeed: ast2600: Add I2C busses   Eddie James
• [PATCH linux dev-5.3 1/3] ARM: aspeed-g6: lpc: add compatible strings   Eddie James
• [PATCH linux dev-5.3 2/3] ARM: dts: aspeed-g6: Add lpc devices   Eddie James
• [PATCH linux dev-5.3 3/3] ARM: dts: aspeed: add Rainier system   Eddie James
• [PATCH v2 linux dev-5.3 1/4] dt-bindings: lpc: add aspeed-g6 compatible strings   Eddie James
• [PATCH v2 linux dev-5.3 2/4] ARM: aspeed-g6: lpc: add compatible strings   Eddie James
• [PATCH v2 linux dev-5.3 3/4] ARM: dts: aspeed-g6: Add lpc devices   Eddie James
• [PATCH v2 linux dev-5.3 4/4] ARM: dts: aspeed: add Rainier system   Eddie James
• Re: [PATCH linux dev-5.2 2/5] mmc: sdhci-of-aspeed: Drop redundant assignment to host->clock   Andrew Jeffery
• Re: [PATCH linux dev-5.2 3/5] mmc: sdhci-of-aspeed: Uphold clocks-on post-condition of set_clock()   Andrew Jeffery
• [PATCH v2 0/4] mmc: sdhci-of-aspeed: Fixes for AST2600 eMMC support   Andrew Jeffery
• [PATCH v2 1/4] mmc: sdhci-of-aspeed: Fix link failure for SPARC   Andrew Jeffery
• [PATCH v2 2/4] mmc: sdhci-of-aspeed: Drop redundant assignment to host->clock   Andrew Jeffery
• [PATCH v2 3/4] mmc: sdhci-of-aspeed: Uphold clocks-on post-condition of set_clock()   Andrew Jeffery
• [PATCH v2 4/4] mmc: sdhci-of-aspeed: Allow max-frequency limitation of SDCLK   Andrew Jeffery
• [PATCH v2 1/4] mmc: sdhci-of-aspeed: Fix link failure for SPARC   Andrew Jeffery
• [PATCH v2 1/4] mmc: sdhci-of-aspeed: Fix link failure for SPARC   Andrew Jeffery
• [PATCH linux dev-5.2] ARM: dts: aspeed: Add Tacoma machine   Andrew Jeffery
• [PATCH v3] mmc: sdhci-of-aspeed: Depend on CONFIG_OF_ADDRESS   Andrew Jeffery
• [PATCH dev-5.2 0/2] i2c: aspeed: Add H/W timeout support   Andrew Jeffery
• [PATCH dev-5.2 0/2] i2c: aspeed: Add H/W timeout support   Andrew Jeffery
• Re: [PATCH linux dev-5.2 1/2] ARM: dts: Aspeed: Add I2C busses to AST2600 and Tacoma   Andrew Jeffery
• [PATCH linux dev-5.2 2/2] i2c: Aspeed: Add AST2600 compatible   Andrew Jeffery
• Re: [PATCH pinctrl/fixes] pinctrl: aspeed: Fix spurious mux failures on the AST2500   Andrew Jeffery
• how to use spi flash BIOS/Host firmware??   Andrew Jeffery
• how to do large-ish IPC transfers   Andrew Jeffery
• QEMU native compile issue   Andrew Jeffery
• [PATCH dev-5.2 0/2] i2c: aspeed: Add H/W timeout support   Andrew Jeffery
• Re: [PATCH v3 1/3] drivers/tty/serial/8250: Make Aspeed VUART SIRQ polarity configurable   Andrew Jeffery
• Re: [PATCH -next 1/2] media: aspeed: refine hsync/vsync polarity setting logic   Andrew Jeffery
• Re: [PATCH -next 2/2] media: aspeed: set hsync and vsync polarities to normal before starting mode detection   Andrew Jeffery
• Re: [PATCH pinctrl/fixes] pinctrl: aspeed: Fix spurious mux failures on the AST2500   Andrew Jeffery
• Re: [PATCH -next 2/2] media: aspeed: set hsync and vsync polarities to normal before starting mode detection   Andrew Jeffery
• Information on Boxelder   Andrew Jeffery
• Rant regarding code review issues   Andrew Jeffery
• Current Minimal Binary Size   Andrew Jeffery
• Current Minimal Binary Size   Andrew Jeffery
• BitBake Apache License and Packaging for OpenBMC Components   Andrew Jeffery
• BitBake Apache License and Packaging for OpenBMC Components   Andrew Jeffery
• phosphor-isolation   Andrew Jeffery
• Re: [PATCH v2 linux dev-5.3 1/4] dt-bindings: lpc: add aspeed-g6 compatible strings   Andrew Jeffery
• Re: [PATCH v2 linux dev-5.3 2/4] ARM: aspeed-g6: lpc: add compatible strings   Andrew Jeffery
• [PATCH v2 linux dev-5.3 3/4] ARM: dts: aspeed-g6: Add lpc devices   Andrew Jeffery
• [PATCH v2 linux dev-5.3 4/4] ARM: dts: aspeed: add Rainier system   Andrew Jeffery
• [PATCH v2 linux dev-5.3 3/4] ARM: dts: aspeed-g6: Add lpc devices   Andrew Jeffery
• [PATCH linux dev-5.3 0/6] ftgmac100: Support AST2600 RMII   Andrew Jeffery
• [PATCH linux dev-5.3 1/6] dt-bindings: net: ftgmac100: Document AST2600 compatible   Andrew Jeffery
• [PATCH linux dev-5.3 2/6] dt-bindings: net: ftgmac100: Describe clock properties   Andrew Jeffery
• [PATCH linux dev-5.3 3/6] dt-bindings: clock: Add AST2600 RMII RCLK gate definitions   Andrew Jeffery
• [PATCH linux dev-5.3 4/6] clk: ast2600: Add RMII RCLK gates for all four MACs   Andrew Jeffery
• [PATCH linux dev-5.3 5/6] net: ftgmac100: Ungate RCLK for RMII on AST2600   Andrew Jeffery
• [PATCH linux dev-5.3 6/6] ARM: dts: tacoma: Enable 50MHz RMII RCLK for NCSI   Andrew Jeffery
• Re: [PATCH linux dev-5.3 3/6] dt-bindings: clock: Add AST2600 RMII RCLK gate definitions   Andrew Jeffery
• Re: [PATCH linux dev-5.3 2/6] dt-bindings: net: ftgmac100: Describe clock properties   Andrew Jeffery
• Re: [PATCH linux dev-5.3 3/6] dt-bindings: clock: Add AST2600 RMII RCLK gate definitions   Andrew Jeffery
• Re: [PATCH linux dev-5.3 5/6] net: ftgmac100: Ungate RCLK for RMII on AST2600   Andrew Jeffery
• Re: [PATCH v3 linux dev-5.3 01/10] dt-bindings: aspeed-lpc: Add G6 compatible strings   Andrew Jeffery
• Re: [PATCH v3 linux dev-5.3 02/10] dt-bindings: ipmi: Add aspeed-g6 compatible strings   Andrew Jeffery
• Re: [PATCH v3 linux dev-5.3 04/10] ipmi: aspeed-g6: Add compatible strings   Andrew Jeffery
• Re: [PATCH v3 linux dev-5.3 05/10] reset: simple: Add AST2600 compatibility string   Andrew Jeffery
• Re: [PATCH v3 linux dev-5.3 06/10] ARM: dts: aspeed-g6: Add lpc devices   Andrew Jeffery
• Re: [PATCH v3 linux dev-5.3 09/10] ARM: dts: aspeed: rainier: Add mac devices   Andrew Jeffery
• Re: [PATCH v3 linux dev-5.3 10/10] ARM: dts: aspeed: rainier: Add i2c devices   Andrew Jeffery
• Re: [PATCH v3 linux dev-5.3 07/10] ARM: dts: aspeed: Add Rainier system   Andrew Jeffery
• Re: [PATCH v3 linux dev-5.3 08/10] ARM: dts: aspeed-g6: Expose SuperIO scratch registers   Andrew Jeffery
• Re: [PATCH linux dev-5.3 2/6] dt-bindings: net: ftgmac100: Describe clock properties   Andrew Jeffery
• Unable to boot OpenBMC image in QEMU for AST2500   Andrew Jeffery
• [PATCH linux dev-5.3 v2 0/8] ftgmac100: Support AST2600 RMII   Andrew Jeffery
• [PATCH linux dev-5.3 v2 1/8] dt-bindings: clock: Add AST2500 RMII RCLK definitions   Andrew Jeffery
• [PATCH linux dev-5.3 v2 2/8] dt-bindings: clock: Add AST2600 RMII RCLK gate definitions   Andrew Jeffery
• [PATCH linux dev-5.3 v2 3/8] clk: aspeed: Add RMII RCLK gates for both AST2500 MACs   Andrew Jeffery
• [PATCH linux dev-5.3 v2 4/8] clk: ast2600: Add RMII RCLK gates for all four MACs   Andrew Jeffery
• [PATCH linux dev-5.3 v2 5/8] dt-bindings: net: ftgmac100: Document AST2600 compatible   Andrew Jeffery
• [PATCH linux dev-5.3 v2 6/8] dt-bindings: net: ftgmac100: Describe clock properties   Andrew Jeffery
• [PATCH linux dev-5.3 v2 7/8] net: ftgmac100: Ungate RCLK for RMII on ASPEED MACs   Andrew Jeffery
• [PATCH linux dev-5.3 v2 8/8] ARM: dts: aspeed: Add RCLK to MAC clocks for RMII interfaces   Andrew Jeffery
• Unable to boot OpenBMC image in QEMU for AST2500   Andrew Jeffery
• Re: [PATCH v4 linuux dev-5.3 01/10] dt-bindings: aspeed-lpc: Add G6 compatible strings   Andrew Jeffery
• Re: [PATCH v4 linuux dev-5.3 03/10] soc: aspeed: lpc: Add G6 compatible strings   Andrew Jeffery
• Re: [PATCH v4 linuux dev-5.3 07/10] ARM: dts: aspeed: Add Rainier system   Andrew Jeffery
• Re: [PATCH linux dev-5.3 03/13] ARM: dts: aspeed: rainier: Enable MAC0   Andrew Jeffery
• Re: [PATCH linux dev-5.3 01/13] ARM: dts: aspeed-g6: Add FMC and SPI devices   Andrew Jeffery
• Re: [PATCH linux dev-5.3 02/13] ARM: dts: aspeed: rainier: Enable FMC and SPI devices   Andrew Jeffery
• Re: [PATCH linux dev-5.3 04/13] ARM: dts: ast2600-evb: Enable FMC and SPI devices   Andrew Jeffery
• Re: [PATCH linux dev-5.3 05/13] mtd: spi-nor: Add support for w25q512jv   Andrew Jeffery
• Re: [PATCH linux dev-5.3 06/13] mtd: spi-nor: aspeed: Introduce a field for the AHB physical address   Andrew Jeffery
• Re: [PATCH linux dev-5.3 07/13] mtd: spi-nor: aspeed: Introduce segment operations   Andrew Jeffery
• Re: [PATCH linux dev-5.3 08/13] mtd: spi-nor: aspeed: add initial support for ast2600   Andrew Jeffery
• Re: [PATCH linux dev-5.3 09/13] mtd: spi-nor: aspeed: Check for disabled segments on the AST2600   Andrew Jeffery
• Re: [PATCH linux dev-5.3 10/13] mtd: spi-nor: aspeed: Introduce training operations per platform   Andrew Jeffery
• Re: [PATCH linux dev-5.3 11/13] mtd: spi-nor: aspeed: Introduce a HCLK mask for training   Andrew Jeffery
• Re: [PATCH linux dev-5.3 12/13] mtd: spi-nor: aspeed: check upper freq limit when doing training   Andrew Jeffery
• Re: [PATCH linux dev-5.3 13/13] mtd: spi-nor: aspeed: add support for AST2600 training   Andrew Jeffery
• [AST2500]The eth0 interface can not work   Andrew Jeffery
• [PATCH linux dev-5.3 00/15] pinctrl: aspeed-g6: Fixes and features   Andrew Jeffery
• [PATCH linux dev-5.3 01/15] pinctrl: aspeed-g6: Sort pins for sanity   Andrew Jeffery
• [PATCH linux dev-5.3 02/15] pinctrl: aspeed-g6: Fix I2C14 SDA description   Andrew Jeffery
• [PATCH linux dev-5.3 03/15] pinctrl: aspeed-g6: Fix I3C3/I3C4 pinmux configuration   Andrew Jeffery
• [PATCH linux dev-5.3 04/15] pinctrl: aspeed-g6: Fix UART13 group pinmux   Andrew Jeffery
• [PATCH linux dev-5.3 05/15] pinctrl: aspeed-g6: Rename SD3 to EMMC and rework pin groups   Andrew Jeffery
• [PATCH linux dev-5.3 06/15] pinctrl: aspeed-g6: Add AST2600 I3C1 and I3C2 pinmux config   Andrew Jeffery
• [PATCH linux dev-5.3 07/15] pinctrl: aspeed-g6: Add support for the AST2600 USB pinmux   Andrew Jeffery
• [PATCH linux dev-5.3 08/15] pinctrl: aspeed: Add ASPEED_SB_PINCONF() helper   Andrew Jeffery
• [PATCH linux dev-5.3 09/15] pinctrl: aspeed: Move aspeed_pin_config_map to separate source file   Andrew Jeffery
• [PATCH linux dev-5.3 10/15] pinctrl: aspeed: Use masks to describe pinconf bitfields   Andrew Jeffery
• [PATCH linux dev-5.3 11/15] pinctrl: aspeed-g6: Add AST2600 pinconf support   Andrew Jeffery
• [PATCH linux dev-5.3 12/15] ARM: dts: aspeed-g6: Fix EMMC function in pinctrl dtsi   Andrew Jeffery
• [PATCH linux dev-5.3 13/15] ARM: dts: aspeed-g6: Add pinctrl properties to MDIO nodes   Andrew Jeffery
• [PATCH linux dev-5.3 14/15] ARM: dts: ast2600-evb: Add pinmux properties for enabled MACs   Andrew Jeffery
• [PATCH linux dev-5.3 15/15] ARM: dts: aspeed-g6: Add missing pinctrl-names property to I2C nodes   Andrew Jeffery
• Re: how can i use ipmitool to interact with openbmc which boot from qemu-system-arm   Andrew Jeffery
• Re: 回复： how can i use ipmitool to interact with openbmc which boot from qemu-system-arm   Andrew Jeffery
• Unable to boot OpenBMC image in QEMU for AST2500   Andrew Jeffery
• Fw:How to use gtest/gmock in openbmc   Samuel Jiang
• CurrentBMCState: BMCState.NotReady   George Keishing
• Fw:How to use gtest/gmock in openbmc   William Kennington
• Proposal for 2 properties for Nameservers   William Kennington
• sdbusplus make check error   William Kennington
• [PATCH v2 1/3] drivers/tty/serial/8250: Make Aspeed VUART SIRQ polarity configurable   Jeremy Kerr
• [PATCH v2 2/3] dt-bindings: serial: 8250: Add documentation for espi-enabled.   Jeremy Kerr
• [Potential Spoof] Re: Sdbusplus/tight memory conditions   Vijay Khemka
• [PATCH] ftgmac100: Disable HW checksum generation on AST2500   Vijay Khemka
• [PATCH] ftgmac100: Disable HW checksum generation on AST2500   Vijay Khemka
• [PATCH] ftgmac100: Disable HW checksum generation on AST2500   Vijay Khemka
• [PATCH] ftgmac100: Disable HW checksum generation on AST2500   Vijay Khemka
• [PATCH] ftgmac100: Disable HW checksum generation on AST2500   Vijay Khemka
• [PATCH] ftgmac100: Disable HW checksum generation on AST2500   Vijay Khemka
• [PATCH] net/ncsi: Disable global multicast filter   Vijay Khemka
• [PATCH] net/ncsi: Disable global multicast filter   Vijay Khemka
• [PATCH] net/ncsi: Disable global multicast filter   Vijay Khemka
• Phosphor code updater   Vijay Khemka
• Phosphor code updater   Vijay Khemka
• Moving kernel to Linux 5.3   Vijay Khemka
• [PATCH v2] ftgmac100: Disable HW checksum generation on AST2500   Vijay Khemka
• Machine name in Code update   Vijay Khemka
• add zeus to layer compatibility   Vijay Khemka
• Machine name in Code update   Vijay Khemka
• Machine name in Code update   Vijay Khemka
• [Potential Spoof] Utility Error Output   Vijay Khemka
• [PATCH linux dev-5.3 2/6] dt-bindings: net: ftgmac100: Describe clock properties   Vijay Khemka
• [PATCH v2] ftgmac100: Disable HW checksum generation on AST2500   Vijay Khemka
• [PATCH linux dev-5.3 2/6] dt-bindings: net: ftgmac100: Describe clock properties   Vijay Khemka
• Accessing kernel panic information without BMC console?   Vijay Khemka
• [PATCH] net/ncsi: Disable global multicast filter   Jakub Kicinski
• [PATCH][spi-next] spi: npcm-fiu: fix spelling mistake "frequancy" -> "frequency"   Colin King
• [PATCH v3 2/2] hwrng: npcm: add NPCM RNG driver   Vinod Koul
• HostWatchdogTimer related changes   Alpana Kumari1
• HostWatchdogTimer related changes   Alpana Kumari1
• Canceled: Platform telemetry and health monitoring - PST AM   Neeraj Ladkani
• OpenBMC Validation and CI   Neeraj Ladkani
• RMCP support   Neeraj Ladkani
• Platform Telemetry workgroup- bi-weekly sync   Neeraj Ladkani
• Cannot connect to console server in s2600wf   Yong Li
• Enable KCS interface in zaius   Yong Li
• Enable KCS interface in zaius   Yong Li
• Enable KCS interface in zaius   Yong Li
• Enable KCS interface in zaius   Yong Li
• HostWatchdogTimer related changes   Yong Li
• HostWatchdogTimer related changes   Yong Li
• Accessing kernel panic information without BMC console?   Yong Li
• i2c-dev wrapper   Yong Li
• bitbake failed on dhcp   Michael Lim
• Question of pid-contorl on stepwise configuration   Derek Lin23
• PECI sensor rename   Derek Lin23
• IPMI SEL Event ID   Yonghui YH21 Liu
• Broadcom PHY Setting   Yonghui YH21 Liu
• [PATCH net-next v8 2/3] net: phy: add support for clause 37 auto-negotiation   Andrew Lunn
• Questions of openbmc-test-automation   Rahul Maheshwari
• Questions of openbmc-test-automation   Rahul Maheshwari
• User management via WebUI vs ipmitool   Rahul Maheshwari
• [PATCH v2 0/2] hwrng: npcm: add NPCM RNG driver support   Tomer Maimon
• [PATCH v2 1/2] dt-binding: hwrng: add NPCM RNG documentation   Tomer Maimon
• [PATCH v2 2/2] hwrng: npcm: add NPCM RNG driver   Tomer Maimon
• [PATCH v1 2/2] hwrng: npcm: add NPCM RNG driver   Tomer Maimon
• [PATCH v1 2/2] hwrng: npcm: add NPCM RNG driver   Tomer Maimon
• [PATCH v1 2/2] hwrng: npcm: add NPCM RNG driver   Tomer Maimon
• [PATCH v2 1/2] dt-binding: hwrng: add NPCM RNG documentation   Tomer Maimon
• [PATCH v1 2/2] hwrng: npcm: add NPCM RNG driver   Tomer Maimon
• [PATCH v3 0/2] hwrng: npcm: add NPCM RNG driver support   Tomer Maimon
• [PATCH v3 1/2] dt-binding: hwrng: add NPCM RNG documentation   Tomer Maimon
• [PATCH v3 2/2] hwrng: npcm: add NPCM RNG driver   Tomer Maimon
• [PATCH v3 2/2] hwrng: npcm: add NPCM RNG driver   Tomer Maimon
• [linux dev-5.3 v1] arm: dts: add NPCM7xx RunBMC Olympus Quanta device tree   Tomer Maimon
• [linux dev-5.3 v2] arm: dts: add NPCM7xx RunBMC Olympus Quanta device tree   Tomer Maimon
• [linux dev-5.3 v2] arm: dts: add NPCM7xx RunBMC Olympus Quanta device tree   Tomer Maimon
• QEMU native compile issue   Johnathan Mantey
• Rant regarding code review issues   Johnathan Mantey
• Proposal for 2 properties for Nameservers   Johnathan Mantey
• Collectd and librrd based telemetry collection   Matuszczak, Piotr
• [ENCRYPTED ATTACHMENT] Collectd and librrd based telemetry collection   Matuszczak, Piotr
• Collectd and librrd based telemetry collection   Matuszczak, Piotr
• RMCP support   Vernon Mauery
• how to do large-ish IPC transfers   Vernon Mauery
• RMCP support   Vernon Mauery
• RMCP support   Vernon Mauery
• Staging plans to remove network IPMI support?   Vernon Mauery
• Is it required that regulator sensors implement threshold interfaces?   Shawn McCarney
• Is it required that regulator sensors implement threshold interfaces?   Shawn McCarney
• Is it required that regulator sensors implement threshold interfaces?   Shawn McCarney
• [U-Boot] [PATCH v2 4/4] net: NC-SI setup and handling   Samuel Mendoza-Jonas
• [PATCH] net/ncsi: Disable global multicast filter   Samuel Mendoza-Jonas
• exceeding match limit on watchers   Ivan Mikhaylov
• exceeding match limit on watchers   Ivan Mikhaylov
• [PATCH v2 net-next] net/ncsi: add response handlers for PLDM over NC-SI   David Miller
• [PATCH net-next] net/ncsi: support unaligned payload size in NC-SI cmd handler   David Miller
• Updating BMC GUI Front End Framework   Gunnar Mills
• User management via WebUI vs ipmitool   Gunnar Mills
• Updating BMC GUI Front End Framework   Derick Montague
• GUI Design Workshop - 9/11/19 - Cancelled   Derick Montague
• Updating BMC GUI Front End Framework   Derick Montague
• GUI Design Workgroup - Today - Wednesday 9/25   Derick Montague
• How to handle a specific platform application?   Andrew MS1 Peng
• [yocto] Build break in the latest openbmc tree.   Khem Raj
• AST2500 I2C Controller got stuck in SRXD state   Tao Ren
• AST2500 I2C Controller got stuck in SRXD state   Tao Ren
• net/ncsi: BMC gets incorrect ipv6 link-local address   Tao Ren
• [PATCH dev-5.2 2/2] i2c: aspeed: add slave inactive timeout support   Tao Ren
• [PATCH dev-5.2 2/2] i2c: aspeed: add slave inactive timeout support   Tao Ren
• [PATCH dev-5.2 2/2] i2c: aspeed: add slave inactive timeout support   Tao Ren
• [PATCH dev-5.2 2/2] i2c: aspeed: add slave inactive timeout support   Tao Ren
• [Potential Spoof] Re: [PATCH dev-5.2 2/2] i2c: aspeed: add slave inactive timeout support   Tao Ren
• [PATCH dev-5.2 2/2] i2c: aspeed: add slave inactive timeout support   Tao Ren
• net/ncsi: BMC gets incorrect ipv6 link-local address   Tao Ren
• [PATCH net-next v8 1/3] net: phy: modify assignment to OR for dev_flags in phy_attach_direct   Tao Ren
• [PATCH net-next v8 2/3] net: phy: add support for clause 37 auto-negotiation   Tao Ren
• [PATCH net-next v8 3/3] net: phy: broadcom: add 1000Base-X support for BCM54616S   Tao Ren
• [PATCH v2 dev-5.2 2/2] i2c: aspeed: add slave inactive timeout support   Tao Ren
• [PATCH net-next v8 2/3] net: phy: add support for clause 37 auto-negotiation   Tao Ren
• [PATCH v3 dev-5.2 2/2] i2c: aspeed: add slave inactive timeout support   Tao Ren
• [PATCH net-next v8 2/3] net: phy: add support for clause 37 auto-negotiation   Tao Ren
• Moving kernel to Linux 5.3   Tao Ren
• emmc secure erase   Tao Ren
• i2c-dev wrapper   Tao Ren
• Security Working Group meeting cancelled - next meeting 9/18   Joseph Reynolds
• BMCWeb changes login password   Joseph Reynolds
• BMCWeb changes login password   Joseph Reynolds
• Expired password + disabled power button design   Joseph Reynolds
• Updating BMC GUI Front End Framework   Joseph Reynolds
• Expired password + disabled power button design   Joseph Reynolds
• stack overflow tag for openbmc questions?   Joseph Reynolds
• Initial expired passwords - initial commit   Joseph Reynolds
• Security Working Group meeting - Wednesday September 18   Joseph Reynolds
• Security Working Group meeting - Wednesday September 18   Joseph Reynolds
• Staging plans to remove network IPMI support?   Joseph Reynolds
• Staging plans to remove network IPMI support?   Joseph Reynolds
• Machine name in Code update   Joseph Reynolds
• Staging plans to remove network IPMI support?   Joseph Reynolds
• Machine name in Code update   Joseph Reynolds
• Proposal to merge code into openbmc 2.7 warrior branch   Joseph Reynolds
• How to make OpenBMC Web automatically redirect to HTTPS   Joseph Reynolds
• Resend: 32 character minimum password requirement   Joseph Reynolds
• [PATCH v4 3/4] watchdog/aspeed: add support for dual boot   Guenter Roeck
• [PATCH v4 4/4] aspeed/watchdog: Add access_cs0 option for alt-boot   Guenter Roeck
• [PATCH] i2c: busses: i2c-fsi.c: Add of_put_node() before break   Wolfram Sang
• [PATCH] i2c: busses: i2c-fsi.c: Add of_put_node() before break   Wolfram Sang
• [PATCH v2 1/3] drivers/tty/serial/8250: Make Aspeed VUART SIRQ polarity configurable   Oskar Senft
• [PATCH v2 2/3] dt-bindings: serial: 8250: Add documentation for espi-enabled.   Oskar Senft
• [PATCH v3 1/3] drivers/tty/serial/8250: Make Aspeed VUART SIRQ polarity configurable   Oskar Senft
• [PATCH v3 2/3] dt-bindings: serial: 8250: Add aspeed, sirq-polarity-sense.   Oskar Senft
• [PATCH v3 3/3] arm: dts: aspeed: Add vuart aspeed, sirq-polarity-sense to aspeed-g5.dtsi   Oskar Senft
• phosphor-ipmi-flash: Update over eSPI interface   Oskar Senft
• phosphor-ipmi-flash: Update over eSPI interface   Oskar Senft
• how to use spi flash BIOS/Host firmware??   Oskar Senft
• phosphor-ipmi-flash: Update over eSPI interface   Oskar Senft
• how to use spi flash BIOS/Host firmware??   Oskar Senft
• Rant regarding code review issues   Emily Shaffer
• about openbmc IRC   Emily Shaffer
• [PATCH -next 25/36] spi: s3c24xx: use devm_platform_ioremap_resource() to simplify code   Andi Shyti
• Sdbusplus/tight memory conditions   Wilfred Smith
• Sdbusplus/tight memory conditions   Wilfred Smith
• [Potential Spoof] Re: Sdbusplus/tight memory conditions   Wilfred Smith
• Port 80H Snoop   Wilfred Smith
• Port 80H Snoop   Wilfred Smith
• Need Help with IPMBBridgeD   Wilfred Smith
• Current Minimal Binary Size   Wilfred Smith
• Rant regarding code review issues   Wilfred Smith
• Rant regarding code review issues   Wilfred Smith
• Current Minimal Binary Size   Wilfred Smith
• SSD/NVMe Temperature Sensors   Wilfred Smith
• BitBake Apache License and Packaging for OpenBMC Components   Wilfred Smith
• Some Recipes Randomly Fail   Wilfred Smith
• src-uri-bad in flashd and chassisd recipes   Wilfred Smith
• Some Recipes Randomly Fail   Wilfred Smith
• Some Recipes Randomly Fail   Wilfred Smith
• src-uri-bad in flashd and chassisd recipes   Wilfred Smith
• Some Recipes Randomly Fail   Wilfred Smith
• Utility Error Output   Wilfred Smith
• 32 character minimum password requirement   Jen Spatz
• BitBake Apache License and Packaging for OpenBMC Components   Matt Spinler
• How can I reset BMC to factory-defaults?   Sivas Srr
• [PATCH linux dev-5.2] ARM: dts: aspeed: Add Tacoma machine   Joel Stanley
• [PATCH linux dev-5.2 5/5] ARM: dts: ast2600-evb: eMMC configuration   Joel Stanley
• [PATCH linux dev-5.2 1/5] mmc: sdhci-of-aspeed: Fix return value check in aspeed_sdc_probe()   Joel Stanley
• [PATCH linux dev-5.2 2/5] mmc: sdhci-of-aspeed: Drop redundant assignment to host->clock   Joel Stanley
• [PATCH linux dev-5.2 3/5] mmc: sdhci-of-aspeed: Uphold clocks-on post-condition of set_clock()   Joel Stanley
• [PATCH linux dev-5.2 4/5] mmc: sdhci-of-aspeed: Allow max-frequency limitation of SDCLK   Joel Stanley
• [PATCH v2 1/4] mmc: sdhci-of-aspeed: Fix link failure for SPARC   Joel Stanley
• [PATCH dev-5.2 0/2] i2c: aspeed: Add H/W timeout support   Joel Stanley
• GPIO state in qemu   Joel Stanley
• net/ncsi: BMC gets incorrect ipv6 link-local address   Joel Stanley
• [PATCH linux dev-5.2 2/2] i2c: Aspeed: Add AST2600 compatible   Joel Stanley
• [PATCH] ftgmac100: Disable HW checksum generation on AST2500   Joel Stanley
• Moving kernel to Linux 5.3   Joel Stanley
• [PATCH linux dev-5.3 5/6] net: ftgmac100: Ungate RCLK for RMII on AST2600   Joel Stanley
• [PATCH linux dev-5.3 6/6] ARM: dts: tacoma: Enable 50MHz RMII RCLK for NCSI   Joel Stanley
• [PATCH linux dev-5.3 3/6] dt-bindings: clock: Add AST2600 RMII RCLK gate definitions   Joel Stanley
• [PATCH linux dev-5.3 4/6] clk: ast2600: Add RMII RCLK gates for all four MACs   Joel Stanley
• [PATCH linux dev-5.3 2/6] dt-bindings: net: ftgmac100: Describe clock properties   Joel Stanley
• [PATCH linux dev-5.3 3/6] dt-bindings: clock: Add AST2600 RMII RCLK gate definitions   Joel Stanley
• [PATCH linux dev-5.3 2/6] dt-bindings: net: ftgmac100: Describe clock properties   Joel Stanley
• LPC irq nobody cared errors   Joel Stanley
• [PATCH linux dev-5.3 05/13] mtd: spi-nor: Add support for w25q512jv   Joel Stanley
• [PATCH linux dev-5.3 0/2] AST2600 Flash layouts   Joel Stanley
• [PATCH linux dev-5.3 1/2] ARM: dts: Add 128MiB OpenBMC flash layout   Joel Stanley
• [PATCH linux dev-5.3 2/2] ARM: dts: aspeed: ast2600evb: Use custom flash layout   Joel Stanley
• [PATCH linux dev-5.3 1/2] ARM: dts: Add 128MiB OpenBMC flash layout   Joel Stanley
• [PATCH linux dev-5.3 13/13] mtd: spi-nor: aspeed: add support for AST2600 training   Joel Stanley
• [PATCH linux dev-5.3 v2 4/8] clk: ast2600: Add RMII RCLK gates for all four MACs   Joel Stanley
• [PATCH linux dev-5.3 v2 3/8] clk: aspeed: Add RMII RCLK gates for both AST2500 MACs   Joel Stanley
• [PATCH linux dev-5.3 v2 7/8] net: ftgmac100: Ungate RCLK for RMII on ASPEED MACs   Joel Stanley
• [PATCH linux dev-5.3 v2 8/8] ARM: dts: aspeed: Add RCLK to MAC clocks for RMII interfaces   Joel Stanley
• [PATCH linux dev-5.3 v2 0/8] ftgmac100: Support AST2600 RMII   Joel Stanley
• [linux dev-5.3 v2] arm: dts: add NPCM7xx RunBMC Olympus Quanta device tree   Joel Stanley
• [PATCH linux dev-5.3] ARM: dts: aspeed: tacoma: Disable CS1 as it is broken   Joel Stanley
• [PATCH] usb: gadget: Quieten gadget config message   Joel Stanley
• phosphor-ipmi-flash: Update over eSPI interface   Harry Sung1
• phosphor-ipmi-flash: Update over eSPI interface   Harry Sung1
• [PATCH] net/ncsi: Disable global multicast filter   Christian Svensson
• Authorization of LDAP users in bmcweb:   RAJESWARAN THILLAIGOVINDAN
• Expired password + disabled power button design   Ed Tanous
• Rant regarding code review issues   Ed Tanous
• Rant regarding code review issues   Ed Tanous
• Current Minimal Binary Size   Ed Tanous
• SSD/NVMe Temperature Sensors   Ed Tanous
• Initial expired passwords - initial commit   Ed Tanous
• Updating BMC GUI Front End Framework   Ed Tanous
• Updating BMC GUI Front End Framework   Ed Tanous
• Updating BMC GUI Front End Framework   Ed Tanous
• Question for upstream   Tanous, Ed
• [External] Re: Question for upstream   Ed Tanous
• Is it required that regulator sensors implement threshold interfaces?   Ed Tanous
• Is it required that regulator sensors implement threshold interfaces?   Ed Tanous
• BMCWeb changes login password   Alexander Tereschenko
• Telemetry Streaming from OpenBMC   Justin Thaler
• User management via WebUI vs ipmitool   Thomaiyar, Richard Marian
• [PATCH v1 2/2] hwrng: npcm: add NPCM RNG driver   Daniel Thompson
• [PATCH v2 1/2] dt-binding: hwrng: add NPCM RNG documentation   Daniel Thompson
• [PATCH v2 2/2] hwrng: npcm: add NPCM RNG driver   Daniel Thompson
• [PATCH v1 2/2] hwrng: npcm: add NPCM RNG driver   Daniel Thompson
• [PATCH v2 1/2] dt-binding: hwrng: add NPCM RNG documentation   Daniel Thompson
• [PATCH v2 2/2] hwrng: npcm: add NPCM RNG driver   Daniel Thompson
• [PATCH v3 2/2] hwrng: npcm: add NPCM RNG driver   Daniel Thompson
• phosphor-ipmi-flash: Update over eSPI interface   Patrick Venture
• [phosphor-pid-control] scaling issue   Patrick Venture
• [phosphor-pid-control] scaling issue   Patrick Venture
• phosphor-pid-control build failure with yocto head   Patrick Venture
• phosphor-ipmi-flash: A problem in BMC FW update over LPC   Patrick Venture
• phosphor-pid-control build failure with yocto head   Patrick Venture
• phosphor-pid-control build failure with yocto head   Patrick Venture
• [phosphor-pid-control] scaling issue   Patrick Venture
• [phosphor-pid-control] scaling issue   Patrick Venture
• [phosphor-pid-control] scaling issue   Patrick Venture
• phosphor-ipmi-flash: Update over eSPI interface   Patrick Venture
• [phosphor-pid-control] scaling issue   Patrick Venture
• Fan PWM monitoring and control   Patrick Venture
• code review about phosphor-ipmi-flash   Patrick Venture
• Fan PWM monitoring and control   Patrick Venture
• add zeus to layer compatibility   Patrick Venture
• MACHINE=s2600wf bitbake obmc-phosphor-image at HEAD fails   Patrick Venture
• MACHINE=s2600wf bitbake obmc-phosphor-image at HEAD fails   Patrick Venture
• MACHINE=s2600wf bitbake obmc-phosphor-image at HEAD fails   Patrick Venture
• phosphor-ipmi-flash: A problem in BMC FW update over LPC   Patrick Venture
• phosphor-ipmi-flash: A problem in BMC FW update over LPC   Patrick Venture
• [PATCH pinctrl/fixes] pinctrl: aspeed: Fix spurious mux failures on the AST2500   Linus Walleij
• Remove support for old assocations interfaces[org.openbmc.Association]   John Wang
• Updating BMC GUI Front End Framework   Wang, Kuiying
• Port 80H Snoop   Wang, Kuiying
• OpenBMC CVE issues in openssl   Wang, Kuiying
• OpenBMC CVE issues in openssl   Wang, Kuiying
• OpenBMC CVE issues in openssl   Wang, Kuiying
• [PATCH net-next] net/ncsi: support unaligned payload size in NC-SI cmd handler   Ben Wei
• [PATCH net-next] net/ncsi: support unaligned payload size in NC-SI cmd handler   Ben Wei
• [PATCH net-next] net/ncsi: support unaligned payload size in NC-SI cmd handler   Ben Wei
• stack overflow tag for openbmc questions?   Brandon Wyman
• OpenBMC CVE issues in openssl   Xu, Qiang
• stack overflow tag for openbmc questions?   Lei YU
• A RFC patch related to meson test   Lei YU
• Sdbusplus/tight memory conditions   Lei YU
• [Potential Spoof] Re: Sdbusplus/tight memory conditions   Lei YU
• Phosphor code updater   Lei YU
• sdbusplus: use virtual destructor or not   Lei YU
• Phosphor code updater   Lei YU
• Fan PWM monitoring and control   Lei YU
• Some Recipes Randomly Fail   Lei YU
• Machine name in Code update   Lei YU
• Adding a new function to sdbusplus::server::object   Lei YU
• How can I reset BMC to factory-defaults?   Lei YU
• Question for upstream   Payne Yang
• [External] Re: Question for upstream   Payne Yang
• [phosphor-pid-control] scaling issue   Kun Yi
• [ENCRYPTED ATTACHMENT] Collectd and librrd based telemetry collection   Kun Yi
• Port 80H Snoop   Kun Yi
• witherspoon-pfault-analysis repository rename to phosphor-power   Kun Yi
• Accessing kernel panic information without BMC console?   Kun Yi
• [yocto] Build break in the latest openbmc tree.   Jae Hyun Yoo
• AST2500 I2C Controller got stuck in SRXD state   Jae Hyun Yoo
• [PATCH dev-5.2 0/2] i2c: aspeed: Add H/W timeout support   Jae Hyun Yoo
• [PATCH dev-5.2 1/2] dt-bindings: i2c: aspeed: add hardware timeout support   Jae Hyun Yoo
• [PATCH dev-5.2 2/2] i2c: aspeed: add slave inactive timeout support   Jae Hyun Yoo
• [PATCH dev-5.2 0/2] i2c: aspeed: Add H/W timeout support   Jae Hyun Yoo
• [PATCH dev-5.2 0/2] i2c: aspeed: Add H/W timeout support   Jae Hyun Yoo
• [PATCH dev-5.2 0/2] i2c: aspeed: Add H/W timeout support   Jae Hyun Yoo
• [PATCH dev-5.2 0/2] i2c: aspeed: Add H/W timeout support   Jae Hyun Yoo
• [PATCH dev-5.2 2/2] i2c: aspeed: add slave inactive timeout support   Jae Hyun Yoo
• [PATCH dev-5.2 2/2] i2c: aspeed: add slave inactive timeout support   Jae Hyun Yoo
• [PATCH dev-5.2 2/2] i2c: aspeed: add slave inactive timeout support   Jae Hyun Yoo
• [PATCH v2 dev-5.2 0/2] i2c: aspeed: Add H/W timeout support   Jae Hyun Yoo
• [PATCH v2 dev-5.2 1/2] dt-bindings: i2c: aspeed: add hardware timeout support   Jae Hyun Yoo
• [PATCH v2 dev-5.2 2/2] i2c: aspeed: add slave inactive timeout support   Jae Hyun Yoo
• [PATCH v2 dev-5.2 2/2] i2c: aspeed: add slave inactive timeout support   Jae Hyun Yoo
• [PATCH v3 dev-5.2 0/2] i2c: aspeed: Add H/W timeout support   Jae Hyun Yoo
• [PATCH v3 dev-5.2 1/2] dt-bindings: i2c: aspeed: add hardware timeout support   Jae Hyun Yoo
• [PATCH v3 dev-5.2 2/2] i2c: aspeed: add slave inactive timeout support   Jae Hyun Yoo
• [PATCH v3 dev-5.2 2/2] i2c: aspeed: add slave inactive timeout support   Jae Hyun Yoo
• [PATCH -next 0/2] media: aspeed: refine mode detection flow   Jae Hyun Yoo
• [PATCH -next 1/2] media: aspeed: refine hsync/vsync polarity setting logic   Jae Hyun Yoo
• [PATCH -next 2/2] media: aspeed: set hsync and vsync polarities to normal before starting mode detection   Jae Hyun Yoo
• [PATCH dev-5.2 0/2] i2c: aspeed: Add H/W timeout support   Jae Hyun Yoo
• [PATCH dev-5.2 0/2] i2c: aspeed: Add H/W timeout support   Jae Hyun Yoo
• [PATCH -next 1/2] media: aspeed: refine hsync/vsync polarity setting logic   Jae Hyun Yoo
• [PATCH -next 2/2] media: aspeed: set hsync and vsync polarities to normal before starting mode detection   Jae Hyun Yoo
• [PATCH -next 2/2] media: aspeed: set hsync and vsync polarities to normal before starting mode detection   Jae Hyun Yoo
• [PATCH -next v2 0/2] media: aspeed: refine mode detection flow   Jae Hyun Yoo
• [PATCH -next v2 1/2] media: aspeed: refine hsync/vsync polarity setting logic   Jae Hyun Yoo
• [PATCH -next v2 2/2] media: aspeed: set hsync and vsync polarities to normal before starting mode detection   Jae Hyun Yoo
• PECI sensor rename   Jae Hyun Yoo
• LPC irq nobody cared errors   Jae Hyun Yoo
• [PATCH] media: aspeed: clear garbage interrupts   Jae Hyun Yoo
• [PATCH -next] spi: npcm-fiu: remove set but not used variable 'retlen'   YueHaibing
• Redfish workshop in France 10/31   Nancy Yuen
• Redfish Aggregator   Nancy Yuen
• [ENCRYPTED ATTACHMENT] Collectd and librrd based telemetry collection   piotr.matuszczak at intel.com
• stack overflow tag for openbmc questions?   krtaylor
• Rant regarding code review issues   krtaylor
• Fan PWM monitoring and control   rgrs
• Fan PWM monitoring and control   rgrs
• Fan PWM monitoring and control   rgrs
• Fan PWM monitoring and control   rgrs
• Fan PWM monitoring and control   rgrs
• Fan PWM monitoring and control   rgrs
• Fan PWM monitoring and control   rgrs
• How can I reset BMC to factory-defaults?   rgrs
• How can I reset BMC to factory-defaults?   rgrs
• User management via WebUI vs ipmitool   rgrs
• User management via WebUI vs ipmitool   rgrs
• Expired password + disabled power button design   vishwa
• RMCP support   vishwa
• how to use spi flash BIOS/Host firmware??   www
• how to use spi flash BIOS/Host firmware??   www
• why cow cannot upload *.bin file ?   www
• about openbmc IRC   南野ムルシエラゴ
• how can i use ipmitool to interact with openbmc which boot from qemu-system-arm   南野ムルシエラゴ
• 回复： how can i use ipmitool to interact with openbmc which boot from qemu-system-arm   南野ムルシエラゴ
• 回复： how can i use ipmitool to interact with openbmc which boot from qemu-system-arm   南野ムルシエラゴ
• Network Settings GUI   孙瑞霞
• Fw:How to use gtest/gmock in openbmc   常晓明
• Fw:How to use gtest/gmock in openbmc   常晓明
• Fw:How to use gtest/gmock in openbmc   常晓明
• sdbusplus make check error   常晓明
• sdbusplus make check error   常晓明
• How to make OpenBMC Web automatically redirect to HTTPS   常晓明
• How to make OpenBMC Web automatically redirect to HTTPS   常晓明
• How to make OpenBMC Web automatically redirect to HTTPS   常晓明
• sdbusplus make check error   常晓明

Last message date: Mon Sep 30 23:37:26 AEST 2019
Archived on: Wed Oct 2 22:06:45 AEST 2019

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...