[PATCH v2 linux dev-5.3 1/4] dt-bindings: lpc: add aspeed-g6 compatible strings

[Brad Bishop]

Assume The AST2600 SoCs contain the same LPC devices as the AST2500.

Signed-off-by: Brad Bishop <bradleyb at fuzziesquirrel.com>
---
 .../devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt   | 3 ++-
 Documentation/devicetree/bindings/mfd/aspeed-lpc.txt      | 8 +++++++-
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
index 028268fd99ee..4b43b7829bd9 100644
--- a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
+++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
@@ -1,6 +1,6 @@
 * Aspeed BT (Block Transfer) IPMI interface
 
-The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs
+The Aspeed SOCs (AST2400, AST2500 and AST2600) are commonly used as BMCs
 (BaseBoard Management Controllers) and the BT interface can be used to
 perform in-band IPMI communication with their host.
 
@@ -9,6 +9,7 @@ Required properties:
 - compatible : should be one of
 	"aspeed,ast2400-ibt-bmc"
 	"aspeed,ast2500-ibt-bmc"
+	"aspeed,ast2600-ibt-bmc"
 - reg: physical address and size of the registers
 
 Optional properties:
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
index 86446074e206..e1197bab57bb 100644
--- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
+++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
@@ -46,6 +46,7 @@ Required properties
 - compatible:	One of:
 		"aspeed,ast2400-lpc", "simple-mfd"
 		"aspeed,ast2500-lpc", "simple-mfd"
+		"aspeed,ast2600-lpc", "simple-mfd"
 
 - reg:		contains the physical address and length values of the Aspeed
                 LPC memory region.
@@ -64,6 +65,7 @@ BMC Node
 - compatible:	One of:
 		"aspeed,ast2400-lpc-bmc"
 		"aspeed,ast2500-lpc-bmc"
+		"aspeed,ast2600-lpc-bmc"
 
 - reg:		contains the physical address and length values of the
                 H8S/2168-compatible LPC controller memory region
@@ -74,6 +76,7 @@ Host Node
 - compatible:   One of:
 		"aspeed,ast2400-lpc-host", "simple-mfd", "syscon"
 		"aspeed,ast2500-lpc-host", "simple-mfd", "syscon"
+		"aspeed,ast2600-lpc-host", "simple-mfd", "syscon"
 
 - reg:		contains the address and length values of the host-related
                 register space for the Aspeed LPC controller
@@ -128,6 +131,7 @@ Required properties:
 - compatible:	One of:
 		"aspeed,ast2400-lpc-ctrl";
 		"aspeed,ast2500-lpc-ctrl";
+		"aspeed,ast2600-lpc-ctrl";
 
 - reg:		contains offset/length values of the host interface controller
 		memory regions
@@ -168,6 +172,7 @@ Required properties:
 - compatible:	One of:
 		"aspeed,ast2400-lhc";
 		"aspeed,ast2500-lhc";
+		"aspeed,ast2600-lhc";
 
 - reg:		contains offset/length values of the LHC memory regions. In the
 		AST2400 and AST2500 there are two regions.
@@ -187,7 +192,8 @@ state of the LPC bus. Some systems may chose to modify this configuration.
 
 Required properties:
 
- - compatible:		"aspeed,ast2500-lpc-reset" or
+ - compatible:		"aspeed,ast2600-lpc-reset" or
+			"aspeed,ast2500-lpc-reset"
 			"aspeed,ast2400-lpc-reset"
  - reg:			offset and length of the IP in the LHC memory region
  - #reset-controller	indicates the number of reset cells expected
-- 
2.21.0